Group items tagged

Experimental microbial fuel cells could turn bacteria into batteries that generate electricity from biomass. The key to this technology is the ability of bacteria to transfer electrons to their surroundings—for example, to the anode of a microbial fuel cell. But if the organisms have to be in direct contact with the anode, such devices would have to have extremely large surface areas. Researchers from Aarhus University, in Denmark, report today in the journal Nature that bacteria appear to conduct electricity while separated by several millimeters, at least a thousand times as far apart than previously demonstrated. The naturally occurring electric currents, if confirmed, would allow bacteria spaced at least 12 millimeters apart to communicate electrically. The discovery might lead to new paths to treating infection and a better understanding of microbial ecosystems.

A new form of propulsion that could allow microrobots to explore human bodies has been discovered. The technique would be used to power robots and other devices such as microfluidic pumps from a distance. Finding a propulsion mechanism that works on the microscopic scale is one of the key challenges for developing microrobots. Another is to find a way to supply such a device with energy because there is so little room to carry on-board fuel or batteries. Now a team lead by Orlin Velev at North Carolina State University in Raleigh, US, has found that a simple electronic diode could overcome both these problems. Velev and Vesselin Paunov from the University of Hull, UK, floated a diode in a tank of salt water and zapped the set-up with an alternating electric field.

A new form of propulsion that could allow microrobots to explore human bodies has been discovered. The technique would be used to power robots and other devices such as microfluidic pumps from a distance. Finding a propulsion mechanism that works on the microscopic scale is one of the key challenges for developing microrobots. Another is to find a way to supply such a device with energy because there is so little room to carry on-board fuel or batteries. Now a team lead by Orlin Velev at North Carolina State University in Raleigh, US, has found that a simple electronic diode could overcome both these problems. Velev and Vesselin Paunov from the University of Hull, UK, floated a diode in a tank of salt water and zapped the set-up with an alternating electric field.

Events such as natural disasters, military actions, and public safety threats have led to an increased need for robust robots — especially ones that can travel across complex terrain in any dimension. The ability to scale vertical building surfaces or other structures offers unique capabilities in military applications such as urban reconnaissance, sensor deployment, and setting up urban network nodes. SRI's novel clamping technology, called compliant electroadhesion, has enabled the first application of this technology to wall-climbing robots that can help with these situations.  As the name implies, electroadhesion is an electrically controllable adhesion technology. It involves inducing electrostatic charges on a wall substrate using a power supply connected to compliant pads situated on the moving robot. SRI has demonstrated robust clamping to common building materials including glass, wood, metal, concrete, etc. with clamping pressures in the range of 0.5 to 1.5 N per square cm of clamp (0.8 to 2.3 pounds per square inch). The technology works on conductive and non-conductive substrates, smooth or rough materials, and through dust and debris. Unlike conventional adhesives or dry adhesives, the electroadhesion can be modulated or turned off for mobility or cleaning. The technology uses a very small amount of power (on the order of 20 microwatts/Newton weight held) and shows the ability to repeatably clamp to wall substrates that are heavily covered in dust or other debris.

Ted Marena of Lattice Semiconductor Corp., points out that designers of digital systems are familiar with implementing the 'leftovers' of their digital design by using FPGAs and CPLDs to glue together various processors, memories, and standard function components on their printed circuit board. In addition to these digital functions, FPGAs and CPLDs can also implement common analog functions using an LVDS input, a simple resistor capacitor (RC) circuit and some FPGA or CPLD digital logic elements to create an analog to digital converter (ADC).

The race to create tiny wireless sensors that could monitor anything from pressure in the eyes and brain to the stability of bridges appears to be heating up. Earlier this month, IEEE Spectrum reported on two approaches to creating an almost-indefinitely-running sensor using piezoelectric systems to convert tiny vibrations into power. Now, another team from the University of Michigan has created an alternative approach that uses solar power to keep the sensor running autonomously for many years.

Xilinx Inc. today introduced the architecture for a new Extensible Processing Platform they claim will deliver unrivaled levels of system performance, flexibility and integration to developers of a wide variety of embedded systems. The ARM Cortex-A9 MPCore processor-based platform enables system architects and embedded software developers to apply a combination of serial and parallel processing to address the challenges they face in designing today's embedded systems, which must meet ever-growing demands to perform highly complex functions. The Xilinx Extensible Processing Platform offers embedded systems designers a processor-centric design and development approach for achieving the compute and processing horsepower required to drive tasks involving high-speed access to real-time inputs, high-performance processing and complex digital signal processing - or any combination thereof - needed to meet their application-specific requirements, including lower cost and power.