Skip to main content

Home/ Copper end use trends/ Group items tagged saving

Rss Feed Group items tagged

Colin Bennett

Leoni will continue to expand its commercial vehicles business with innovative products... - 0 views

  • “We have developed several new solutions, which can provide clear weight and cost saving opportunities to manufacturers of such commercial vehicles as  trucks, buses as well as agricultural, industrial and construction equipment”, stated Dr Andreas Brand, member of Leoni AG’s Management Board with responsibility for the Wiring Systems Division. “We are confident that we will grow our business with the CV industry by more than five per cent per year until 2025.”Alternative conductors save weight and costIn terms of weight optimisation, Leoni can reduce the harnesses’ weight by replacing conventional wires. Alongside copper wires with smaller cross-sections, the Company provides the CV market with a range of wires made of aluminium for the power segment, i.e. with a cross-section between 10 mm2 and 110 mm2 and even larger. Although the aluminium conductors have a larger cross-section in order to deliver the same electrical conductivity, aluminium technology results in a noticeable weight reduction. On its booth, Leoni will show its busbar, a solid aluminium conductor, which can be bent in three dimensions and weighs only about half as much as the conventional copper component.Leoni will also show various conductor solutions based on copper. These can be used where mechanical strength as well as electrical conductivity is required. For example, a copper wire with a cross-section of 0.75 mm² could potentially be replaced by a smaller wire cross section, such as a 0.50 mm² or a 0.35 mm². Thanks to the use of less conductor material, Leoni’s customers can not just reduce the weight of their vehicles, but also benefit in terms of cost savings.
  •  
    ""We have developed several new solutions, which can provide clear weight and cost saving opportunities to manufacturers of such commercial vehicles as trucks, buses as well as agricultural, industrial and construction equipment", stated Dr Andreas Brand, member of Leoni AG's Management Board with responsibility for the Wiring Systems Division. "We are confident that we will grow our business with the CV industry by more than five per cent per year until 2025." Alternative conductors save weight and cost In terms of weight optimisation, Leoni can reduce the harnesses' weight by replacing conventional wires. Alongside copper wires with smaller cross-sections, the Company provides the CV market with a range of wires made of aluminium for the power segment, i.e. with a cross-section between 10 mm2 and 110 mm2 and even larger. Although the aluminium conductors have a larger cross-section in order to deliver the same electrical conductivity, aluminium technology results in a noticeable weight reduction. On its booth, Leoni will show its busbar, a solid aluminium conductor, which can be bent in three dimensions and weighs only about half as much as the conventional copper component. Leoni will also show various conductor solutions based on copper. These can be used where mechanical strength as well as electrical conductivity is required. For example, a copper wire with a cross-section of 0.75 mm² could potentially be replaced by a smaller wire cross section, such as a 0.50 mm² or a 0.35 mm². Thanks to the use of less conductor material, Leoni's customers can not just reduce the weight of their vehicles, but also benefit in terms of cost savings."
xxx xxx

Eskom likely to release new connections policy next week - 0 views

  •  
    Industrial, mining and property investors were still in a state of confusion over power utility Eskom's approach to new electricity connections, but the corporation promised on Tuesday that the issue would be clarified with the imminent release of a comprehensive policy, possibly by as early as next week. CEO Jacob Maroga - currently in Europe on a road show to expose potential investors to its R150-billion capital-raising plan - said last week that the utility had not yet determined just how much power could be allocated to new projects. However, he indicated that a needs analysis was under way in a bid to align its stretched supply profile to the new demand. Maroga also stressed that supply security could be markedly improved and space created for new connections if greater savings were achieved. In fact, he displayed a graph showing that Eskom's reserve margin, which was currently running at a paltry 6%, could rise to well above 10% by 2009 should its savings targets be met. "If we follow the 10% savings path, there will be space for new connections. But we need information from potential customers, which will tell us what is, in fact, possible," he said.
James Wright

China - RMB14.0B subsidy for energy-saving appliances - 0 views

  •  
    The Ministry of Finance announced that a subsidy package worth RMB14.0B (US$2.22B) will be introduced to encourage sales of energy-saving desktop computers and air conditioners. The subsidy program will last one year and it is hoped that it will result in the market share of energy-saving products rising to 40% of the total.
Glycon Garcia

Donald Sadoway: The missing link to renewable energy | Video on TED.com - 0 views

  • Donald Sadoway: The missing link to renewable energy
  • What's the key to using alternative energy, like solar and wind? Storage -- so we can have power on tap even when the sun's not out and the wind's not blowing. In this accessible, inspiring talk, Donald Sadoway takes to the blackboard to show us the future of large-scale batteries that store renewable energy. As he says: "We need to think about the problem differently. We need to think big. We need to think cheap." Donald S
  •  
    "Donald Sadoway: The missing link to renewable energy Tweet this talk! (we'll add the headline and the URL) Post to: Share on Twitter Email This Favorite Download inShare Share on StumbleUpon Share on Reddit Share on Facebook TED Conversations Got an idea, question, or debate inspired by this talk? Start a TED Conversation, or join one of these: Green Home Energy=Hydrogen Generators-alternative sources Started by Kathleen Gilligan-Smith 1 Comment What is the real missing link in renewable energy? Started by Enrico Petrucco 8 Comments Comment on this Talk 60 total comments Sign in to add comments or Join (It's free and fast!) Sort By: smily raichel 0 Reply Less than 5 minutes ago: Nice smily raichel 0 Reply Less than 5 minutes ago: Good David Mackey 0 Reply 3 hours ago: Superb invention, but I would suggest one more standard mantra that they should move on from and that is the idea of power being supplied by a centralised grid. This technology seems to me to be much more beneficial on a local scale, what if every home had its own battery, then home power generation becomes economically more viable for everyone. If you could show that a system like this could pay for itself in say 5 years then every home would want one. Plus for this to be implemented on a large scale requires massive investment that could be decades away. Share the technology and lets get it in homes by next year. Great ted talk. Jon Senior 0 Reply 1 hour ago: I agree 100%. Localised energy production would also make energy consumers more conscious of their consumption and encourage efforts to reduce it. We can invent and invent all we want, but the fast solution to allowing renewable energies to take centre stage is to reduce the base energy draw. With lower baseline consumption, smaller "always on" generators are required to keep the grid operational. Town and house-l
Colin Bennett

Terminating aluminum wire in automotive wire harness - 0 views

  • As cable harnesses are already among the most complex and heaviest components used in vehicles, any possibility for weight savings is an attractive proposition. A model calculation of realistic weight-saving potential was analyzed in an average mid-size car with a cable harness weighing just under 30 kilograms. For the substitution of Al wire for Cu conductors, exclusively larger cross-sections (>0.75 mm²) were analyzed, excluding the fine-signal conductors. Al conductors with the next-highest cross-section replaced the affected Cu conductors. Under these conditions, a purely computational weight savings of around 7kg was initially achieved. However, for the last decade in Germany, the solid battery terminals were already made of Al, so the actual potential for savings in this particular case study is 2-3kg per cable harness.
Colin Bennett

After the era of excess - 0 views

  •  
    Instead, America's consumption binge drew support from two major asset bubbles-property and credit. Courtesy of cheap and freely available credit, in conjunction with record housing price appreciation, consumers tripled the rate of net equity extraction from their homes, from 3 percent of disposable personal income in 2001 to 9 percent in 2006. Only by levering increasingly overvalued homes could Americans go on the biggest consumption binge in modern history. And now those twin bubbles-property and credit-have burst, and so has the US consumption bubble: real consumer spending fell at an unprecedented 3.5 percent average annual rate in the two final quarters of 2008. While the original excesses were made in America, the rest of the world was delighted to go along for the ride. With the United States lacking in internal saving, it had to import surplus savings from abroad in order to grow-and ran massive current-account and trade deficits to attract that capital. This fit perfectly with the macro-imbalances of the export-led developing countries of Asia, whose exports exceeded a record 45 percent of regional GDP in 2007-fully ten percentage points higher than their share ten years earlier, in the depths of the Asian financial crisis. China led the charge, taking its exports from 20 percent, to 40 percent of its GDP over the past seven years alone. The export-led growth in developing Asia could well be described as a second-order bubble-in effect, a derivative of the one in US consumption.
Emma james

Taiwan's first zero-carbon building flaunts 13 green building design methods - Educatio... - 0 views

  •  
    The Y. S. Sun Green Building Research Center, which costs TWD87,000 ($296,1) per 36 square feet, adopts 13 different green building design methods, including five natural ventilation energy-saving methods, two equipment reduction methods, and five equipment energy-saving technologies and renewable energy technologies.
Colin Bennett

3-D laser sintering technology creates possibility of significant weight savings in air... - 0 views

  • More than 50 percent weight savings in aircraft construction is now possible using hypermodern production techniques. A process called 3-D laser sintering of the raw material permits a completely new kind of fabrication. This process can reduce aircraft component part counts and improve designs, leading to enormous savings in weight and volume. The only equipment for this process in Austria - and at its time the second in the world - is located at FOTEC in Wiener Neustadt. The research subsidiary of the University of Applied Sciences located there is presently optimising the monitoring and quality control of the production process, while manufacturing a fuel collector for an aircraft engine that is even around 75 percent lighter than before.
Colin Bennett

Nexans debuts new overhead carbon conductor in Brazil - 0 views

  • The line between Jandira and Cotia is the world’s first commercial installation of Lo-Sag conductors that use a carbon fiber composite core to save weight and double capacity.
  •  
    "The line between Jandira and Cotia is the world's first commercial installation of Lo-Sag conductors that use a carbon fiber composite core to save weight and double capacity."
Colin Bennett

Jaguar Land Rover and the quest for cost-neutral weight saving - 2 views

  • “We’re asking for infotainment and wiring to remain weight-neutral,” says White, “while body, powertrain and chassis, amongst others, try to save weight.”
Colin Bennett

Copper Trends in Data Center Cabling - 0 views

  • Foldable, high-performance copper cable saves space in the rack High-performance, low-cost passive copper cabling remains the preferred alternative for short-reach applications in the data center. However, standard round copper cables can be bulky and consume precious space. A recent innovation in manufacturing technology by 3M has resulted in the development of
  • High-performance, low-cost passive copper cabling remains the preferred alternative for short-reach applications in the data center. However, standard round copper cables can be bulky and consume precious space. A recent innovation in manufacturing technology by 3M has resulted in the development of a uniquely shielded, thin, ribbon-style copper cable. The cable has the ability to fold multiple times and maintain signal integrity, allowing for higher-density racks and space savings. A major barrier to decreasing the size and stiffness of a round cable is inherent in the construction of traditional cable. This is an issue because a round copper cable can extend up to nine inches when routed behind a cabinet. In conventional, twin axial constructions, the shield is applied by wrapping it spirally around the insulated wire pair. This layer is then overwrapped to provide support and retain the primary shield wrap, increasing the stiffness of the pair. Multiple pairs are then cabled and an overall foil and braided shield are typically applied, thus further increasing the cable bulk and stiffness.
Colin Bennett

Illegal not to act: Could courts save world from climate change? - 1 views

  •  
    "The Netherlands was aiming to cut its greenhouse emissions by 17 per cent by 2020, but the court has ordered that they must be cut by 25 per cent in the same time frame."
xxx xxx

NEC Electronics Introduces Low-Power 16-bit Microcontrollers - 0 views

  •  
    NEC Electronics America Inc. introduced to the Americas twenty-two new 16-bit All Flash microcontrollers (MCUs) for compact, low-power, battery-operated, and sensor-enabled systems. Based on NEC Electronics' high-performance 16-bit 78K0R CPU core, the new 78K0R/Kx3-L MCUs offer very low power consumption to extend battery life, and more on-chip integration to help reduce the size and cost of battery-driven and sensor-enabled systems, such as fire and security alarms, meters, industrial sensors, anti-shake digital cameras, handheld medical diagnostics devices, and data-logging and point-of-sale terminals. In addition to low power consumption, the new lineup offers high-performance on-chip oscillators, built-in circuits for sensor functions, and extended system operating time. "As environmental awareness has grown, energy-saving systems have become particularly reliant on MCU technology," said Jim Trent, Vice President, Multipurpose Microcontroller and Automotive Group, NEC Electronics America. "Over the past several years, NEC Electronics has delivered many ultra-low-power 8- and 32-bit MCUs that have met the demand for energy efficiency. With the introduction of the new 78K0R/Kx3-L devices, however, NEC Electronics is now delivering the benefits of energy efficiency in its 16-bit products."
Colin Bennett

Can Semiconductors Save the World? - 0 views

  •  
    "Everything that is important to this world will be solved by semiconductor technology." That was the claim of National Semiconductor CEO and Chairman Brian Halla at the EcoChip forum hosted at chip-maker Actel's Silicon Valley campus Monday. It's a tall order, of course, not least of all for an industry expecting to see its annual sales plummet by 5.6 percent to $246.7 billion in 2009 compared to 2008. For the fourth quarter alone, the Semiconductor Industry Association anticipates sales will drop 5.9 percent from the previous quarter.
Colin Bennett

Does a Big Economy Need Big Power Plants? - 0 views

  •  
    This evolution made sense at first, because power stations were costlier and less reliable than the grid, so by backing each other up through the grid and melding customers' diverse loads, they could save capacity and achieve reliability. But these assumptions have reversed: central thermal power plants now cost less than the grid, and are so reliable that about 98 percent to 99 percent of all power failures originate in the grid. Thus the original architecture is raising, not lowering, costs and failure rates: cheap and reliable power must now be made at or near customers.
Sergio Ferreira

Saving Gas: Pneumatic Hybrid Engine Is Much Cheaper Than Electric Hybrids And Almost As... - 0 views

  • Although the fuel saving achieved by the pneumatic hybrid is not as large as that of an electric hybrid, it still amounts to 80 percent of the latter. In return, the price-performance ratio is distinctly better.
  • The new engine concept has aroused the interest of several major motor companies and automitive suppliers, who have obtained information on-site. Some of the ideas of the new concept have already been patented
Colin Bennett

China struggling to meet energy, pollution goals | Environment | Reuters - 0 views

  •  
    The country will shut down small coal-fired power generators producing 13 gigawatts this year and require at least 80 percent of buildings under construction to meet energy-saving standards for the construction process by the end of 2008, the report said.
Colin Bennett

Solar Water Heaters Now Mandatory In Hawaii | MetaEfficient - 0 views

  •  
    Hawaii has become the first state to require solar water heaters in new homes. The bill was signed into law by Governor Linda Lingle, a Republican. It requires the energy-saving systems in homes starting in 2010. It prohibits issuing building permits for single-family homes that do not have solar water heaters. Hawaii relies on imported fossil fuels more than any other state, with about 90 percent of its energy sources coming from foreign countries, according to state data.
1 - 20 of 90 Next › Last »
Showing 20 items per page