Group items tagged

It is powered with two 3.3F Goldcaps. They can be charged in a few seconds. When they are charged, MAXIBUg gets "afraid" of light, and wanders of to go to play "in the dark". After a while, about 20 seconds (depending on the current used by the two motors ), the power has dropped, and it wants to "eat". It gets light attracted, and will turn and go to the light. When it gets there, it will recharge and still will be atrackted to the light until it reaches a trigger voltage , at which it gets "afraid"of the light again. This will go on all day until someone turns off the lightsource. While doing all this it also will backup when bumping into something.

Because of the "on-off" output of the first schmitt trigger, the inputs for the LDRs will switch. That's why it gets light atracted -light afraid. This also means that you cannot use IR diodes (like SHF205). You have to use LDRs !

how to interpret sensor data into a mathematical form readable by computers

There are only 3 steps you need to follow: Gather Sensor Data (data logging) Graph Sensor Data Generate Line Equation

Some sensors (such as sonar and Sharp IR) do not work properly at very close range

The Sharp IR Range Finder works by the process of triangulation. A pulse of light (wavelength range of 850nm +/-70nm) is emitted and then reflected back (or not reflected at all). When the light returns it comes back at an angle that is dependent on the distance of the reflecting object. Triangulation works by detecting this reflected beam angle - by knowing the angle, distance can then be determined.

The IR range finder reciever has a special precision lens that transmits the reflected light onto an enclosed linear CCD array based on the triangulation angle.

The Sharp IR has a non-linear output. This means that as the distance increases linearly (by set increments), the analog output increases/decreases non-linearly.

CALEB CHUNG: Of course we could have used micro-servo motors to accomplish the motion of Pleo, but we aren’t able to use expensive motors. So we had to engineer it with a high-speed motor with high gearing and no backlash for control purposes and have it all fit within the muscle envelope of Pleo.

So what we did was go after a lot of ethology research. How do animals really handle the complexity of their environment? We built a virtual brain—a whole system that decides how Pleo will react in various situations.

CALEB CHUNG: Pleo will reset thresholds and adjust his idea of what he thinks is normal. Let’s say you get Pleo and you take him home to your shag carpet. When Pleo walks, the carpet will drag on his feet. So his force feedback sensors will realize that he is spending too much energy to walk around. Pleo will try different things to reduce the energy spent. Eventually, he will have the idea to step higher. Your Pleo compared to my Pleo will walk with a higher step.

Motorcycle lead acid batteries work great for larger low performance type robots. They are great for solar power robots too.

lead acid batteries have the serious problem of being very large and heavy, need to always be kept charged, and do not have the high discharge rates as the more modern batteries.

They have low power capacities, are heavy, have trouble supplying large amounts of current in short time periods, and get expensive to constantly replace

pseudocode: read left_photoresistor read right_photoresistor if left_photoresistor detects more light than right_photoresistor then turn robot left if right_photoresistor detects more light than left_photoresistor then turn robot right if right_photoresistor detects about the same as left_photoresistor then robot goes straight loop

Photovore Algorithm, Improved This algorithm does the same as the original, but instead of case-based it works under a more advanced Fuzzy Logic control algorithm. Your robot will no longer just have the three modes of turn left, turn right, and go forward. Instead will have commands like 'turn left by 10 degrees' or 'turn right really fast', and with no additional lines of code! pseudocode: read left_photoresistor read right_photoresistor left_motor = (left_photoresistor - right_photoresistor) * arbitrary_constant right_motor = (right_photoresistor - left_photoresistor) * arbitrary_constant loop

attach your Pager Motors to your Popper using two Fuse Clips, two Small Paper Clips, and no solder

Large diameter wheels give your robot low torque but high velocity. So if you already have a very strong motor, then you can use wheels with larger diameters.

But if your motor is weak (such as if it does not have any gearing), you want to use a much smaller diameter wheel. This will make your robot slower, but at least it has enough torque to go up a hill!

Wheel width. You do not want it too wide as it causes increased resistance to rotating the wheel on a surface.

the Cricket's yellow LED flashes when the Cricket is sending infrared signals.

You can type any Cricket Logo instruction in the Cricket Logo Command Center, and it will be immediately transferred to the Cricket and executed.