Skip to main content

Home/ Robotics/ Group items tagged nonsolder

Rss Feed Group items tagged

Filter: All | Bookmarks | Topics Simple Middle
York Jong

nonsolder bicore - 0 views

www.geocities.com/...nonsolderbicore.htm

3star beam bicore electronics nonsolder robot socket

shared by York Jong on 26 May 07 - Cached
  • York Jong on 26 May 07
     
    A complete tutorial on creating a fully adjustable bicore, master/slave bicore, head or any other circuit around any other chip!
York Jong

Ray's Solder-less Motor Mount Tutorial - 0 views

raysbeambots.solarbotics.net/MotorMount.htm

5star beam diy motor nonsolder photopopper phototrope photovore robot toturial trick

shared by York Jong on 28 May 07 - Cached
  • attach your Pager Motors to your Popper using two Fuse Clips, two Small Paper Clips, and no solder
  • ...7 more annotations...
  • Set one straightened paper clip aside, you will use it at the end. Bend the two tips of one of the two paper clips as shown.
  • Put it in through the fuse clip like this, but make sure the notch in the fuse clip is facing out. (The clip has one edge bent inwards. This is the part that has to face outwards). Study this next picture closely.
  • From the position above, bend the paper clip up and then around the lead of the fuse clip as in the next picture.
  • Bend the paper clip under the fuse clip...
  • then up and over the fuse clip:
  • then around its other lead and you're almost done with the first fuse clip.
  • First clip -- wire is on the RIGHT side of the fuse clip leads... Second Clip -- wire is on the LEFT side of the fuse clip leads... But remember to make sure the notch in the fuse clip is facing out. (The clip has one edge bent inwards. This is the part that has to face outwards).  Follow all the steps above with the second clip and you get this:
  • York Jong on 28 May 07
     
    I'll show you how to attach your Pager Motors to your Popper using two Fuse Clips, two Small Paper Clips, and no solder.
1 - 2 of 2
Showing 20▼ items per page