Skip to main content

Home/ Document Wars/ Group items tagged compatibility

Rss Feed Group items tagged

Gary Edwards

OASIS ODF: List Proposal Enhancement Vote Deadline on Wednesday | Gary Edwards - 0 views

  •  
    Thanks to Paul for digging this up. Who would have guessed that years later, these same issues hang like a dark shroud on the future of ODF? Note also that June 1st of 2007 was the cut off date for ODF 1.2 proposals and recommendations. The OpenFormula and Metadata SC's were rushing to make the cutoff. The List Enhancement proposal itself was just one of many enhancements submitted by Florian Reuter in November of 2006, designed to greatly improve ODF compatibility with MSOffice "ODF". By November of 2006, thanks largely to the Massachusetts Pilot Study, there were a number of ODF plug-ins for MSOffice. All were capable of producing perfectly compliant ISO 26300 ODF, but falling far short of public expectations of high fidelity interop with OpenOffice ODF. Sound familiar? Everyone knew that it was only a matter of time before Microsoft was pressed into providing MSOffice ODF support. There was no doubt that they would face the exact same interop challenges as the many independent plug-in efforts. Hence the stepped up efforts by many at the OASIS ODF to "fix" ISO 26300! At the time of the List Enhancement Proposal, we had increasing evidence from the many pilot studies that ODF was impossible to implement in business and workgroup environments where the MSOffice productivity environment was the defining platform. ODF was not designed to be compatible with MSOffice or the binary documents so critical to business processes bound to this environment. OpenXML was designed exactly to be compatible with these environments. Unless ODF fixed it's compatibility/interoperability problems there was no way for the independent plug-ins to provide a reasonable ODF implementation alternative to OpenXML. And even if Microsoft did produce an MSOffice ODF compliant with ISO 26300, these productivity environments would remain entirely locked. The world expected ODF to be compatible, interoperable, Web ready, and fully capable of cracking open the iron grip Mic
Gary Edwards

Microsoft playing three card monte with XML conversion, with Sun as the "outside man" w... - 0 views

  • In a highly informative post to his Open Stack blog Wednesday, Edwards explains how three key features are necessary for organizations to convert to open formats. These are: Conversion Fidelity - the billions of binaries problem Round Trip Fidelity - the MSOffice bound business processes, line of business integrated apps, and assistive technology type add-ons Application Interop - the cross platform, inter application, cross information domain problem
  •  
    Dana Blankenhorn posted this article back in March of 2007.  It was right at the time when the OASIS ODF TC and Metadata XML/RDF SC (Sub Committee) were going at it hammer and tong concerning three very important file format characteristics needed to fulfill a real world interoperability expectation:

    .... Compatibility - file format level interop -
    :::  backwards compatibility / compatibility with existing file formats, including the legacy of billions of binary Microsoft documents

    ....... Interoperability - application level interop-
    ::::::  application interoperability including interop with all Microsoft applications

Gary Edwards

Amazing Stuff: ThinkFree Office Compatibility with MSOffice compared to OpenOffice Comp... - 0 views

  •  
    This is amazing stuff. With all the talk about OpenOffice ODF compatibility problems with existing MSOffice productivity environments and documents, this comparison is stunning. I stumbled across this Compatibility Comparison reading this article: ThinkFree Set to Launch The First Complete Android Office Suite. Documents To Go is currently the only provider of Word and Excel documents on Android. The ThinkFree Office comparisons to OpenOffice cover a number of familiar compatibility issues, with layout at the top of the list. ThinkFree Write 3.5 vs OpenOffice Writer 3.0 ".....When using a word processor to create documents, you really shouldn't have to worry about whether your client will be able to see the document as you intended." ".... However, if you use a low-cost solution like OpenOffice, you should be prepared for frustrations and disappointments....."
Alex Brown

Is ODF designed to be not implementable without source code? - Wouter - 0 views

  • How come I am the one to notice how deficient ODF really is?
    • Alex Brown
       
      "But mummy, he's not *wearing* any clothes ..."
  •  
    Exactly! It's not that ODF is under-specified. It's that ODF can't be fully specified until OpenOffice is completely documented and capable of supporting expected features. There is this famous quote from Sun's Svante Schubert that pretty much says it all; "Nothing goes into the ODF specification unless it's supported by OpenOffice". The statement was made at a meeting of the OASIS ODF Metadata SC while discussing the controversial use of "XML ID". IBM's Elias Torres, of RDFa fame, was passionately arguing that use of the XML ID should be left open to all developers. Sun had taken the position that XML ID should be limited to only a handful of elements supported by OpenOffice. The discussion acutally got far worse than the quote would indicate. Elias compromised his arguments suggesting that we should allow developers to have at it with XML ID for at least one year, and then revisit the issue. This suggestion lead to a discussion of how developers implementing elements with metadata would notify the metadata sub committee of their use case. A discussion list was proposed. The idea being that developers would send in their use cases and the oligarchs on the sub c would approve or disprove. Incredibly, this suggestions was shot down by Bruce d'Arcus (OpenDocument Foundation). Bruce thought that any developer needing metadata support for particular elements should have to join the OASIS ODF Metadata SC like everyone else before their needs would be considered. ( i.e. - like the other oligarchs). At the next weeks meeting, Rob Weir showed up with a list of 14 spreadsheet related elements that IBM needed XML ID support for. Sun representatives Svante Schubert and Michael Brauer immediately approved the use, agreeing that OpenOffice would support that implementation. This how things work at OASIS ODF. Ever wonder why SVG or XForms support in ODF is so limited? It's because the specification directly reflects the limits of the OpenOffice implement
  •  
    Sorry. Diigo cut my comment off about half way through. I've complained to Wade and Maggie about this problem, especially how it impacts and cripples the "Group Auto-Blog Post" feature . Months have gone by. Yet still the issue remains.
Gary Edwards

Between a rock and a hard place: ODF & CIO's - Where's the Love? - 0 views

  • So I'm disappointed. And not just on behalf of open documents, but on behalf of the CIOs of this country, who are now caught between a rock and a hard place, without a paddle to defend themselves with if they won't to do anything new, innovative and necessary, if a major vendor's ox might be gored in consequence. After the impressive lobbying assault mounted over the past six months against open document format legislation, I expect you won't be hearing of many state IT departments taking the baton back from their legislators.    And who can blame them? If they tried, it wouldn't be likely to be anything as harmless as an open document format that would bite them in the butt.
  •  
    Andy Updegrove weighs in on the wave of ODF legislative failures first decribed by Eric Lai and Gregg Keizer compiled the grim data in a story they posted at ComputerWorld last week titled  Microsoft trounces pro-ODF forces in state battles over open document formats.


    Andy believes that it is the failure of state legislators to do their job that accounts for these failures.  He provides three reasons for this being a a failure of legislative duty.  The most interesting of which is claim that legislators should be protecting CIO's from the ravages of aggressve vendors. 


    The sad truth is that state CIO's are not going to put their careers on the line for a file format after what happened in Massachusetts.


    Andy puts it this way, "
      

    And second, in a situation like this, it is a cop out for legislatures to claim that they should defer to their IT departments to make decisions on open formats.  You don't have to have that good a memory to recall why these bills were introduced in the first place: not because state IT departments aren't a good place to make such decisions, but because successive State CIOs in Massachusetts had been so roughly handled in trying to make these very decisions that no state CIO in his or her right mind was likely to volunteer to be the next sacrificial victim.
    As both Peter Quinn and Louis Gutierrez both found out, trying to make responsible standards-related decisions whe
Gary Edwards

Odf - Converters & the ODF Zero Interop problem - 0 views

  • The ODF-Converter translates OpenXML documents (.DOCX) to Open Document Format (.Open Document Format) (and conversely) for Open XML processing applications. You will find below the list of unsupported features which may be due to standard compatibility issues, or to the translator itself (see rendering issues as discussed in the blog)...
  •  
    Explosive compatibility - interoperability study concerning ODF and MOOXL!  This has Florian's signature written all over it, and it goes right to the heart of the matter.

    David A. Wheeler submitted a comment to the OASIS ODF TC outlining his concerns with this publication.  He suggests that a few minor changes to ODF could greatly improve compatibility - interop issues.  He also figures out that OpenOffice - ODF has more features than MSOffice - MOOXML.  Wha the doesn't ge is that it is these new and innovative features that continue to increase the difficulties of implementing ODF in real world business process workgroups!

    David also ignores the fact that the TC jus tvoted down the Novell "LIt Enhancement Proposal" which was specifically designed to address the compatibility - interop issues outlined in this odf-converter blog!  Given a choice, the ODF TC members chose the new and innovative features of the interop breaking Sun-KOffice "List Enhancement Proposal".   

    The List Enhancement Proposal discussion was so contentious and focused on personal destruction as to represent a total break down of the ODF concensus process.  There is no way that either the Foundation or Novell will ever contribute another compatibility - interop enhancement proposal given the personal assault and determined oppostion of Sun to compatibility - interoperability initiatives.

    The hard lesson the Foundation learned is that if you oppose Sun, you'll get booted out of OASIS!

    The lesson Novell learned is that they are better off working through Ecma 376 to resolve these issues that the public demands be addressed.

    Notice the last line in David's comment, "In any case, the MUCH, MUCH longer list of problems with Microsoft XML format isn't our problem." 

    During the contentious List Enhancement Proposal and the compatibility - interop related Metadata RDF/XML discussions, ODF members freque
  •  
    These are the same guys who just voted against the Novell List Enhancement Proposal that did exactly what the odf-converter blog claims needs to be done if the compatibility-interop problems are to be resolved!
Gary Edwards

Slamming the door shut on MS OOXML - 0 views

  • So your goal is a networked world where metadata is routinely trashed by apps developed by those who are too dumb or otherwise disabled to preserve metadata and only the big boys get to do interoperability, right? So if I send you a document for your editing, I can't count on getting it back with xml:id attributes intact. No thanks, Patrick. That sounds way too much like how things have worked ever since office productivity software first came on the market. In your world, interoperability belongs only to those who can map features 1:1 with the most featureful apps. And that is precisely why OpenDocument never should have been approved as a standard. Your kind of interoperability makes ODF a de facto Sun Microsystems standard wearing the clothing of a de jure standard. Why not just standardize the whole world on Microsoft apps and be done with it? Are two monopolies maintained by an interoperability barrier between them better than one? Fortunately, we don't have to debate the issue because the Directives resolve the issue. You lose under the rules of the game.
  •  
    Marbux on metadata and the language of universal interoperability: Few people are aware of the raging debate that has pushed ODF to the edge. The OASIS ODF TC is split between those who support Universal Interoperability, and those who insist on continuing with limited ODF interoperability.

    ODF (OpenDocument), formally known as Open Office XML, began it's standards life in the fall of 2002 when Sun submitted the OpenOffice file format to OASIS for consideration as a office suite XML fiel format standard. The work on ODF did not start off as a clean slate in that there were near 600 pages of application specific specification from day one of the standards work. The forces of universal interop have sought for years to separate ODF from the application specific features and implementation model of OpenOffice that began with those early specification volumes, and continues through the undue influence Sun continues to have over the ODF specification work.

    Many mistakenly believed that submission of ODF to ISO and subsequent approval as an international standard would provide an effective separation, putting ODF on the track of a truly universal file format.

    Marbux is one of those Universal Interop soldiers who has dug in his heels, cried to the heavens that enough is enough, and demanded the necessary changes to ODF interoperability language.

    This post he recently submitted to the OASIS ODF Metadata SC is a devastating rebuttal to the arguments of those who support the status quo of limited interoperability.

    In prior posts, marbux argues that ISO directives demand without compromise universal interoperability. This demand is also shared by the World Trade Organization directives regarding international trade laws and agreements. Here he brings those arguments together with the technical issues for achieving universal interop.

    It's a devastating argument.

Gary Edwards

Is It Game Over? - ODF Advocate Andy UpDegrove is Worried. Very Worried - 0 views

  • This seems to me to be a turning point for the creation of global standards. Microsoft was invited to be part of the original ODF Technical Committee in OASIS, and chose to stand aside. That committee tried to do its best to make the standard work well with Office, but was naturally limited in that endeavor by Microsoft's unwillingness to cooperate. This, of course, made it easier for Microsoft to later claim a need for OOXML to be adopted as a standard, in order to "better serve its customers." The refusal by an incumbent to participate in an open standards process is certainly its right, but it is hardly conduct that should be rewarded by a global standards body charged with watching out for the best interests of all.
  •  
    Andy UpDegrove takes on the issue of Microsoft submitting their proprietary "XML alternative to PDF" proposal to Ecma for consideration as an international standard.  MS XML-PDF will compliment ECMA 376 (OOXML - OfficeOpenXML) which is scheduled for ISO vote in September of 2007.  Just a bit over 60 days from today.

    Andy points out some interesting things; such as the "Charter" similarities between MS XML-PDF and MS OOXML submisssions to Ecma:

    MS XML-PDF Scope: The goal of the Technical Committee is to produce a formal standard for office productivity applications within the Ecma International standards process which is fully compatible with the Office Open XML Formats. The aim is to enable the implementation of the Office Open XML Formats by a wide set of tools and platforms in order to foster interoperability across office productivity applications and with line-of-business systems. The Technical Committee will also be responsible for the ongoing maintenance and evolution of the standard.   Programme of Work: Produce a formal standard for an XML-based electronic paper format and XML-based page description language which is consistent with existing implementations of the format called the XML Paper Specification,…[in each case, emphasis added]

    If that sounds familiar, it should, because it echoes the absolute directive of the original OOXML technical committee charter, wh
Gary Edwards

ODF and OOXML - The Final Act - 0 views

  • The format war between Microsoft’s Open Office XML (OOXML) and the open source OpenDocument Format (ODF) has flared up again, right before the looming second OOXML ISO vote in March.
  • “ISO has a policy that, wherever possible, there should only be one standard to maximise interoperability and functionality. We have an international standard for digital documentation, ODF,” IBM’s local government programs executive Kaaren Koomen told AustralianIT.
  • ODF has garnered some criticism for being a touch limited in scope, however, one of its strengths is that it has already been accepted as a worldwide ISO standard. Microsoft’s format on the other hand, has been criticised for being partially proprietary, and even a sly attempt by the software giant to hedge its bets and get in on open standards while keeping as many customers locked into its solutions as possible.
    • Gary Edwards
       
      A "touch limited in scope"? Youv'e got to be kidding. ODF was not defined to be compatible with the billions of MSOffice binary (BIN) documents. Nor was it designed to further interoperability with MSOffice.
      Given that there are over 550 million MSOffice desktops, representing upwards of 95% of all desktop productivity environments, this discrepancy of design would seem to be a bit more than a touch limited in scope!
      Many would claim that this limitation was due to to factors: first that Microsoft refused to join the OASIS ODF TC, which would have resulted in an expanded ODF designed to meet the interoperability needs of the great herd of 550 million users; and second, that Microsoft refused to release the secret binary blueprints.
      Since it turns out that both IBM and Sun have had access to the secret binary blueprints since early 2006, and in the two years since have done nothing to imptove ODF interop and conversion fidelity, this second claim doesn't seem to hold much water.
      The first claim that Microsoft didn't participate in the OASIS ODF process is a bit more interesting. If you go back to the first OASIS ODF Technical Committee meeting, December 16th, 2002, you'll find that there was a proposal to ammend the proposed charter to include the statemnt that ODF (then known as Open Office XML) be compatible with existing file formats, including those of MSOffice. The "MSOffice" reference was of course not included because ODF sought to be application, platform and vendor independent. But make no mistake, the discussion that day in 2002 was about compatibility and the conversion of the legacy BIN's into ODF.
      The proposal to ammend the charter was tabled. Sun objected, claiming that people would interpret the statement as a direct reference to the BIN's, clouding the charter's purpose of application, platform and vendor independence. They proposed that the charter ammendment b
    • Gary Edwards
       
      Will harmonization work? I don't think so. The problem is that the DIN group is trying to harmonize two application specific formats. OpenOffice has one way of implementing basic document structures, and MSOffice another. These differences are directly reflected in the related formats, ODF and OOXML. Any attempts to harmonize ODF and OOXML will require that the applications, OpenOffice and MSOffice, be harmonized! There is no other way of doing this unless the harmonized spec has two different methods for implementing basic structures like lists, tables, fields, sections and page dynamics. Not to mention the problems of feature disparities. If the harmonized spec has two different implementation models for basic structures, interoeprability will suffer enormously. And interoperability is after all the prupose of the standardization effort. That brings us to a difficult compromise. Should OpenOffice compromise it's "innovative" features and methods in favor of greater interoperability with MSOffice and billions of binary documents? Let me see, 100 million OpenOffice installs vs. 550 MSOffice installs bound to workgroup-workflow business processes - many of which are critical to day to day business operations? Sun and IBM have provided the anser to this question. They are not about to compromise on OpenOffice innovation! They believe that since their applications are free, the cost of ODF mandated "rip out and replace" is adequately offset. Events in Massachusetts prove otherwise! On July 2nd, 2007, Sun delivered to Massachusetts the final version of their ODF plug-in for MSOffice. That night, after reviewing and testing the 135 critical documents, Massachusetts made a major change to their ETRM web site. They ammended the ETRM to fully recognize OOXML as an acceptable format standard going forward. The Massachusetts decision to overturn th
  • ...1 more annotation...
    • Gary Edwards
       
      The Burton Group did not recommend that ISO recognize OOXML as a standard! They pointed out that the marketplace is going to implement OOXML by default simply because it's impossible to implement ODF in situations where MSOffice dominates. ISO should not go down the slippery slope of recognizing application-platform-vendor specific standards. They already made that mistake with ODF, and recognizing OOXML is hardly the fix. What ISO should be doign is demanding that ODF fully conform with ISO Interoeprability Requirements, as identified in the May 2006 directive! Forget OOXML. Clean up ODF first.
  •  
    Correcto mundo! There should be only one standard to maximise interoeprability and functionality. But ODF is application specific to the way OpenOffice works. It was not designed from a clean slate. Nor was the original 2002 OpenOffice XML spec designed as an open source effort! Check the OOo source code if you doubt this claim. The ONLY contributors to Open Office XML were Sun employees! What the world needs is in fact a format standard designed to maximise interoperability and functionality. This requires a total application-platofrm-vendor independence that neither ODF or OOXML can claim. The only format that meets these requirements is the W3C's family of HTML-XML formats. These include advancing Compound Docuemnt Framework format components such as (X)HTML-5, CSS-3, XForms, SVG and SMiL.. The W3C's CDF does in fact meet the markeplace needs of a universal format that is open, unencumbered and totally application, platform and vendor independent. The only trick left for CDF is proving that legacy desktop applications can actually implement conversions from existing in-memory-binary-representations to CDF without loss of information.
Gary Edwards

XML Production Workflows? Start with the Web and XHTML - 0 views

  • Challenges: Some Ugly Truths The challenges of building—and living with—an XML workflow are clear enough. The return on investment is a long-term proposition. Regardless of the benefits XML may provide, the starting reality is that it represents a very different way of doing things than the one we are familiar with. The Word Processing and Desktop Publishing paradigm, based on the promise of onscreen, WYSIWYG layout, is so dominant as to be practically inescapable. It has proven really hard to get from here to there, no matter how attractive XML might be on paper. A considerable amount of organizational effort and labour must be expended up front in order to realize the benefits. This is why XML is often referred to as an “investment”: you sink a bunch of time and money up front, and realize the benefits—greater flexibility, multiple output options, searching and indexing, and general futureproofing—later, over the long haul. It is not a short-term return proposition. And, of course, the returns you are able to realize from your XML investment are commensurate with what you put in up front: fine-grained, semantically rich tagging is going to give you more potential for searchability and recombination than a looser, more general-purpose approach, but it sure costs more. For instance, the Text Encoding Initiative (TEI) is the grand example of pouring enormous amounts of energy into the up-front tagging, with a very open-ended set of possibilities down the line. TEI helpfully defines a level to which most of us do not have to aspire.[5] But understanding this on a theoretical level is only part of the challenge. There are many practical issues that must be addressed. Software and labour are two of the most critical. How do you get the content into XML in the first place? Unfortunately, despite two decades of people doing SGML and XML, this remains an ugly question.
  • Practical Challenges In 2009, there is still no truly likeable—let alone standard—editing and authoring software for XML. For many (myself included), the high-water mark here was Adobe’s FrameMaker, substantially developed by the late 1990s. With no substantial market for it, it is relegated today mostly to the tech writing industry, unavailable for the Mac, and just far enough afield from the kinds of tools we use today that its adoption represents a significant hurdle. And FrameMaker was the best of the breed; most of the other software in decent circulation are programmers’ tools—the sort of things that, as Michael Tamblyn pointed out, encourage editors to drink at their desks. The labour question represents a stumbling block as well. The skill-sets and mind-sets that effective XML editors need have limited overlap with those needed by literary and more traditional production editors. The need to think of documents as machine-readable databases is not something that comes naturally to folks steeped in literary culture. In combination with the sheer time and effort that rich tagging requires, many publishers simply outsource the tagging to India, drawing a division of labour that spans oceans, to put it mildly. Once you have XML content, then what do you do with it? How do you produce books from it? Presumably, you need to be able to produce print output as well as digital formats. But while the latter are new enough to be generally XML-friendly (e-book formats being largely XML based, for instance), there aren’t any straightforward, standard ways of moving XML content into the kind of print production environments we are used to seeing. This isn’t to say that there aren’t ways of getting print—even very high-quality print—output from XML, just that most of them involve replacing your prepress staff with Java programmers.
  • Why does this have to be so hard? It’s not that XML is new, or immature, or untested. Remember that the basics have been around, and in production, since the early 1980s at least. But we have to take account of a substantial and long-running cultural disconnect between traditional editorial and production processes (the ones most of us know intimately) and the ways computing people have approached things. Interestingly, this cultural divide looked rather different in the 1970s, when publishers were looking at how to move to digital typesetting. Back then, printers and software developers could speak the same language. But that was before the ascendancy of the Desktop Publishing paradigm, which computerized the publishing industry while at the same time isolating it culturally. Those of us who learned how to do things the Quark way or the Adobe way had little in common with people who programmed databases or document-management systems. Desktop publishing technology isolated us in a smooth, self-contained universe of toolbars, grid lines, and laser proofs. So, now that the reasons to get with this program, XML, loom large, how can we bridge this long-standing divide?
  • ...44 more annotations...
  • Using the Web as a Production Platform The answer, I think, is right in front of you. The bridge is the Web, a technology and platform that is fundamentally based on XML, and which many publishers are by now comfortably familiar with. Perhaps not entirely comfortably, but at least most publishers are already working with the Web; they already either know or have on staff people who understand it and can work with it. The foundation of our argument is this: rather than looking at jumping to XML in its full, industrial complexity, which seems to be what the O'Reilly-backed StartWithXML initiative[6] is suggesting, publishers instead leverage existing tools and technologies—starting with the Web—as a means of getting XML workflows in place. This means making small investments and working with known tools rather than spending tens of thousands of dollars on XML software and rarefied consultants. It means re-thinking how the existing pieces of the production toolchain fit together; re-thinking the existing roles of software components already in use. It means, fundamentally, taking the Web seriously as a content platform, rather than thinking of it as something you need to get content out to, somehow. If nothing else, the Web represents an opportunity to think about editorial and production from outside the shrink-wrapped Desktop Publishing paradigm.
  • Is the Web made of Real XML? At this point some predictable objections can be heard: wait a moment, the Web isn’t really made out of XML; the HTML that makes up most of the Web is at best the bastard child of SGML, and it is far too flaky/unstructured/underpowered to be taken seriously. We counter by arguing that although HTML on the Web exists in a staggering array of different incarnations, and that the majority of it is indeed an unstructured mess, this does not undermine the general principle that basic, ubiquitous Web technologies can make a solid platform for content management, editorial process, and production workflow.
  • With the advent of a published XML standard in the late 1990s came the W3C’s adoption of XHTML: the realization of the Web’s native content markup as a proper XML document type. Today, its acceptance is almost ubiquitous, even while the majority of actual content out there may not be strictly conforming. The more important point is that most contemporary Web software, from browsers to authoring tools to content management systems (from blogs to enterprise systems), are capable of working with clean, valid XHTML. Or, to put the argument the other way around, clean, valid XHTML content plays absolutely seamlessly with everything else on the Web.[7]
  • The objection which follows, then, will be that even if we grant that XHTML is a real XML document type, that it is underpowered for “serious” content because it is almost entirely presentation (formatting) oriented; it lacks any semantic depth. In XHTML, a paragraph is a paragraph is a paragraph, as opposed to a section or an epigraph or a summary.
  • n contrast, more “serious” XML document types like DocBook[8] or DITA-derived schemas[9] are capable of making semantic distinctions about content chunks at a fine level of granularity and with a high degree of specificity.
  • So there is an argument for recalling the 80:20 rule here. If XHTML can provide 80% of the value with just 20% of the investment, then what exactly is the business case for spending the other 80% to achieve that last 20% of value? We suspect the ratio is actually quite a bit steeper than 80:20 for most publishers.
  • IDML is a well thought-out XML standard that achieves two very different goals simultaneously: it preserves all of the information that InDesign needs to do what it does; and it is broken up in a way that makes it possible for mere mortals (or at least our Master of Publishing students) to work with it.
  • XHTML, on the other hand, is supported by a vast array of quotidian software, starting with the ubiquitous Web browser. For this very reason, XHTML is in fact employed as a component part of several more specialized document types (ONIX and ePub among them).
  • Why re-invent a general-purpose prose representation when XHTML already does the job?
  • It is worth pausing for a moment to consider the role of XHTML in the ePub standard for ebook content. An ePub file is, anatomically, a simply disguised zip archive. Inside the zip archive are a few standard component parts: there are specialized files that declare metadata about the book, and about the format of the book. And then there is the book’s content, represented in XHTML. An ePub book is a Web page in a wrapper.
  • To sum up the general argument: the Web as it already exists presents incredible value to publishers, as a platform for doing XML content management with existing (and often free) tools, and without having to go blindly into the unknown. At this point, we can offer a few design guidelines: prefer existing and/or ubiquitous tools over specialized ones wherever possible; prefer free software over proprietary systems where possible; prefer simple tools controlled and coordinated by human beings over fully automated (and therefore complex) systems; play to our strengths: use Web software for storing and managing content, use layout software for layout, and keep editors and production people in charge of their own domains.
  • Putting the Pieces Together: A Prototype
  • At the SFU Master of Publishing Program, we have been chipping away at this general line of thinking for a few years. Over that time, Web content management systems have been getting more and more sophisticated, all the while getting more streamlined and easier to use. (NB: if you have a blog, you have a Web content management system.) The Web is beginning to be recognized as a writing and editing environment used by millions of people. And the ways in which content is represented, stored, and exchanged online have become increasingly robust and standardized.
  • The missing piece of the puzzle has been print production: how can we move content from its malleable, fluid form on line into the kind of high-quality print production environments we’ve come to expect after two decades of Desktop Publishing?
  • Anyone who has tried to print Web content knows that the existing methods leave much to be desired (hyphenation and justification, for starters). In the absence of decent tools for this, most publishers quite naturally think of producing the print content first, and then think about how to get material onto the Web for various purposes. So we tend to export from Word, or from Adobe, as something of an afterthought.
  • While this sort of works, it isn’t elegant, and it completely ignores the considerable advantages of Web-based content management.
  • Content managed online is stored in one central location, accessible simultaneously to everyone in your firm, available anywhere you have an Internet connection, and usually exists in a much more fluid format than Word files. If only we could manage the editorial flow online, and then go to print formats at the end, instead of the other way around. At SFU, we made several attempts to make this work by way of the supposed “XML import” capabilities of various Desktop Publishing tools, without much success.[12]
  • In the winter of 2009, Adobe solved this part of the problem for us with the introduction of its Creative Suite 4. What CS4 offers is the option of a complete XML representation of an InDesign document: what Adobe calls IDML (InDesign Markup Language).
  • The IDML file format is—like ePub—a simply disguised zip archive that, when unpacked, reveals a cluster of XML files that represent all the different facets of an InDesign document: layout spreads, master pages, defined styles, colours, and of course, the content.
  • What this represented to us in concrete terms was the ability to take Web-based content and move it into InDesign in a straightforward way, thus bridging Web and print production environments using existing tools and skillsets, with a little added help from free software.
  • Such a workflow—beginning with the Web and exporting to print—is surely more in line with the way we will do business in the 21st century, where the Web is the default platform for reaching audiences, developing content, and putting the pieces together. It is time, we suggest, for publishers to re-orient their operations and start with the Web.
  • We would take clean XHTML content, transform it to IDML-marked content, and merge that with nicely designed templates in InDesign.
  • The result is an almost push-button publication workflow, which results in a nice, familiar InDesign document that fits straight into the way publishers actually do production.
  • Tracing the steps To begin with, we worked backwards, moving the book content back to clean XHTML.
  • The simplest method for this conversion—and if you want to create Web content, this is an excellent route—was to use Adobe’s “Export to Digital Editions” option, which creates an ePub file.
  • Recall that ePub is just XHTML in a wrapper, so within the ePub file was a relatively clean XHTML document. It was somewhat cleaner (that is, the XHTML tagging was simpler and less cluttered) than InDesign’s other Web-oriented exports, possibly because Digital Editions is a well understood target, compared with somebody’s website.
  • In order to achieve our target of clean XHTML, we needed to do some editing; the XHTML produced by InDesign’s “Digital Editions” export was presentation-oriented. For instance, bulleted list items were tagged as paragraphs, with a class attribute identifying them as list items. Using the search-and-replace function, we converted such structures to proper XHTML list and list-item elements. Our guiding principle was to make the XHTML as straightforward as possible, not dependent on any particular software to interpret it.
  • We broke the book’s content into individual chapter files; each chapter could then carry its own basic metadata, and the pages conveniently fit our Web content management system (which is actually just a wiki). We assembled a dynamically generated table of contents for the 12 chapters, and created a cover page. Essentially, the book was entirely Web-based at this point.
  • When the book chapters are viewed online, they are formatted via a CSS2 stylesheet that defines a main column for content as well as dedicating screen real estate for navigational elements. We then created a second template to render the content for exporting; this was essentially a bare-bones version of the book with no navigation and minimal styling. Pages (or even the entire book) can be exported (via the “Save As...” function in a Web browser) for use in either print production or ebook conversion. At this point, we required no skills beyond those of any decent Web designer.
  • Integrating with CS4 for Print Adobe’s IDML language defines elements specific to InDesign; there is nothing in the language that looks remotely like XHTML. So a mechanical transformation step is needed to convert the XHTML content into something InDesign can use. This is not as hard as it might seem.
  • Both XHTML and IDML are composed of straightforward, well-documented structures, and so transformation from one to the other is, as they say, “trivial.” We chose to use XSLT (Extensible Stylesheet Language Transforms) to do the work. XSLT is part of the overall XML specification, and thus is very well supported in a wide variety of tools. Our prototype used a scripting engine called xsltproc, a nearly ubiquitous piece of software that we found already installed as part of Mac OS X (contemporary Linux distributions also have this as a standard tool), though any XSLT processor would work.
  • In other words, we don’t need to buy InCopy, because we just replaced it with the Web. Our wiki is now plugged directly into our InDesign layout. It even automatically updates the InDesign document when the content changes. Credit is due at this point to Adobe: this integration is possible because of the open file format in the Creative Suite 4.
  • We wrote an XSLT transformation script[18] that converted the XHTML content from the Web into an InCopy ICML file. The script itself is less than 500 lines long, and was written and debugged over a period of about a week by amateurs (again, the people named at the start of this article). The script runs in a couple of seconds, and the resulting .icml file can then be “placed” directly into an InDesign template. The ICML file references an InDesign stylesheet, so the template file can be set up with a house-styled layout, master pages, and stylesheet definitions for paragraphs and character ranges.
  • The result is very simple and easy to use. Our demonstration requires that a production editor run the XSLT transformation script manually, but there is no reason why this couldn’t be built directly into the Web content management system so that exporting the content to print ran the transformation automatically. The resulting file would then be “placed” in InDesign and proofed.
  • It should be noted that the Book Publishing 1 proof-of-concept was artificially complex; we began with a book laid out in InDesign and ended up with a look-alike book laid out in InDesign. But next time—for instance, when we publish Book Publishing 2—we can begin the process with the content on the Web, and keep it there throughout the editorial process. The book’s content could potentially be written and edited entirely online, as Web content, and then automatically poured into an InDesign template at proof time. “Just in time,” as they say. This represents an entirely new way of thinking of book production. With a Web-first orientation, it makes little sense to think of the book as “in print” or “out of print”—the book is simply available, in the first place online; in the second place in derivative digital formats; and third, but really not much more difficult, in print-ready format, via the usual InDesign CS print production system publishers are already familiar with.
  • Creating Ebook Files Creating electronic versions from XHTML source is vastly simpler than trying to generate these out of the existing print process. The ePub version is extremely easy to generate; so is online marketing copy or excerpts for the Web, since the content begins life Web-native.
  • Since an ePub file is essentially XHTML content in a special wrapper, all that is required is that we properly “wrap” our XHTML content. Ideally, the content in an ePub file is broken into chapters (as ours was) and a table of contents file is generated in order to allow easy navigation within an ebook reader. We used Julian Smart’s free tool eCub[19] to simply and automatically generate the ePub wrapper and the table of contents. The only custom development we did was to create a CSS stylesheet for the ebook so that headings and paragraph indents looked the way we wanted. Starting with XHTML content, creating ePub is almost too easy.
  • today, we are able to put the process together using nothing but standard, relatively ubiquitous Web tools: the Web itself as an editing and content management environment, standard Web scripting tools for the conversion process, and the well-documented IDML file format to integrate the layout tool.
  • Our project demonstrates that Web technologies are indeed good enough to use in an XML-oriented workflow; more specialized and expensive options are not necessarily required. For massive-scale enterprise publishing, this approach may not offer enough flexibility, and the challenge of adding and extracting extra semantic richness may prove more trouble than it's worth.
  • But for smaller firms who are looking at the straightforward benefits of XML-based processes—single source publishing, online content and workflow management, open and accessible archive formats, greater online discoverability—here is a way forward.
  • Rather than a public-facing website, our system relies on the Web as a content management platform—of course a public face could easily be added.
  • The final piece of our puzzle, the ability to integrate print production, was made possible by Adobe's release of InDesign with an open XML file format. Since the Web's XHTML is also XML, is can be easily and confidently transformed to the InDesign format.
  • Furthermore, just to get technical for a moment, XHTML is extensible in a fairly straightforward way, through the common “class” attribute on each element. Web developers have long leveraged this kind of extensibility in the elaboration of “microformats” for semantic-web applications.[10] There is no reason why publishers shouldn’t think to use XHTML’s simple extensibility in a similar way for their own ends.
  • Using the Web as a Production Platform
  •  
    I was looking for an answer to a problem Marbux had presented, and found this interesting article.  The issue was that of the upcoming conversion of the Note Case Pro (NCP) layout engine to the WebKit layout engine, and what to do about the NCP document format. My initial reaction was to encode the legacy NCP document format in XML, and run an XSLT to a universal pivot format like TEI-XML.  From there, the TEI-XML community would provide all the XSLT transformation routines for conversion to ODF, OOXML, XHTML, ePUB and HTML/CSS. Researching the problems one might encounter with this approach, I found this article.  Fascinating stuff. My take away is that TEI-XML would not be as effective a "universal pivot point" as XHTML.  Or perhaps, if NCP really wants to get aggressive; IDML - InDesign Markup Language. The important point though is that XHTML is a browser specific version of XML, and compatible with the Web Kit layout engine Miro wants to move NCP to. The concept of encoding an existing application-specific format in XML has been around since 1998, when XML was first introduced as a W3C standard, a "structured" subset of SGML. (HTML is also a subset of SGML). The multiplatform StarOffice productivity suite became "OpenOffice" when Sun purchased the company in 1998, and open sourced the code base. The OpenOffice developer team came out with a XML encoding of their existing document formats in 2000. The application specific encoding became an OASIS document format standard proposal in 2002 - also known as ODF. Microsoft followed OpenOffice with a XML encoding of their application-specific binary document formats, known as OOXML. Encoding the existing NCP format in XML, specifically targeting XHTML as a "universal pivot point", would put the NCP Outliner in the Web editor category, without breaking backwards compatibility. The trick is in the XSLT conversion process. But I think that is something much easier to handle then trying to
  •  
    I was looking for an answer to a problem Marbux had presented, and found this interesting article.  The issue was that of the upcoming conversion of the Note Case Pro (NCP) layout engine to the WebKit layout engine, and what to do about the NCP document format. My initial reaction was to encode the legacy NCP document format in XML, and run an XSLT to a universal pivot format like TEI-XML.  From there, the TEI-XML community would provide all the XSLT transformation routines for conversion to ODF, OOXML, XHTML, ePUB and HTML/CSS. Researching the problems one might encounter with this approach, I found this article.  Fascinating stuff. My take away is that TEI-XML would not be as effective a "universal pivot point" as XHTML.  Or perhaps, if NCP really wants to get aggressive; IDML - InDesign Markup Language. As an after thought, i was thinking that an alternative title to this article might have been, "Working with Web as the Center of Everything".
  •  
    I was looking for an answer to a problem Marbux had presented, and found this interesting article.  The issue was that of the upcoming conversion of the Note Case Pro (NCP) layout engine to the WebKit layout engine, and what to do about the NCP document format. My initial reaction was to encode the legacy NCP document format in XML, and run an XSLT to a universal pivot format like TEI-XML.  From there, the TEI-XML community would provide all the XSLT transformation routines for conversion to ODF, OOXML, XHTML, ePUB and HTML/CSS. Researching the problems one might encounter with this approach, I found this article.  Fascinating stuff. My take away is that TEI-XML would not be as effective a "universal pivot point" as XHTML.  Or perhaps, if NCP really wants to get aggressive; IDML - InDesign Markup Language. The important point though is that XHTML is a browser specific version of XML, and compatible with the Web Kit layout engine Miro wants to move NCP to. The concept of encoding an existing application-specific format in XML has been around since 1998, when XML was first introduced as a W3C standard, a "structured" subset of SGML. (HTML is also a subset of SGML). The multiplatform StarOffice productivity suite became "OpenOffice" when Sun purchased the company in 1998, and open sourced the code base. The OpenOffice developer team came out with a XML encoding of their existing document formats in 2000. The application specific encoding became an OASIS document format standard proposal in 2002 - also known as ODF. Microsoft followed OpenOffice with a XML encoding of their application-specific binary document formats, known as OOXML. Encoding the existing NCP format in XML, specifically targeting XHTML as a "universal pivot point", would put the NCP Outliner in the Web editor category, without breaking backwards compatibility. The trick is in the XSLT conversion process. But I think that is something much easier to handle then trying to
Gary Edwards

But can they implement ODF? South African Government Adopts ODF (and not OOXML) - 0 views

  • That said, it goes on to acknowledge that “there are standards which we are obliged to adopt for pragmatic reasons which do not necessarily fully conform to being open in all respects.
  •  
    So, South Africa was watching closely the failed effort in Massachusetts to implement ODF?  And now they are determined to make it work? Good thing they left themselves a "pragmatic" out; "there are standards which we are obliged to adopt for pragmatic reasons which do not necessarily fully conform to being open in all respects."

    Massachusetts spent a full year on an ODF implementation Pilot Study only to come to the inescapable conclusion that they couldn't implement ODF without a high fidelity "round trip" capable ODF plug-in for MSOffice.  In May of 2006, Pilot Study in hand, Massachusetts issued their now infamous RFi, "the Request for Information" concerning the feasibility of an ODF plug-in clone of the MS-OOXML Compatibility Pack plug-in for MSOffice applications. At the time there was much gnashing of teeth and grinding of knuckles in the ODf Community, but the facts were clear. The lead dog hauling the ODf legislative mandate sleigh could not make it without ODf interoperability with MSOffice. Meaning, the rip out and replace of MSOffice was no longer an option. For Massachusetts to successfully implement ODf, there had to be a high level of ODf compatibility with existing MS documents, and ODf application interoperability with existing MS applications. Although ODf was not designed to meet these requirements, the challenge could not have been any more clear. Changes in ODf would have to be made. So what happened?

    Over a year later,
Gary Edwards

Microsoft Hit By U.S. DOT Ban On Windows Vista, Explorer 7, and Office 2007 - Technolog... - 0 views

  • »  E-Mail »  Print »  Discuss »  Write To Editor late last year -- can be resolved. "We have more confidence in Microsoft than we would have 10 years ago," says Schmidt. "But it always makes sense to look at the security implications, the value back to the customer, and those kind of issues." The DOT's ban on Vista, Internet Explorer 7, and Office 2007 applies to 15,000 computer users at DOT proper who are currently running the Windows XP Professional operating system. The memo indicates that a similar ban is in effect at the Federal Aviation Administration, which has 45,000 desktop users. Compatibility with existing applications appears to be the Transportation Department's major concern. According to a separate memo, a number of key software applications and utilities in use in various branches of the department aren't Vista compatible. Among them are Aspen 2.8.1, ISS 2.11, ProVu 3.1.1, and Capri 6.5, according to a memo issued by staffers at the DOT's Federal Motor Carrier Safety Administration. Any prolonged ban on new Microsoft technologies by the federal government could have a significant impact on the software maker's bottom line, as Microsoft sells millions of dollars in software to the feds annually. http://as.cmpnet.com/event.ng/Type=count&ClientType=2&AdID=125682&FlightID=75634&TargetID=2625&SiteID=222&AffiliateID=283&EntityDefResetFlag=0&Segments=1411,3108,3448,11291,12119&Targets=2625,2878,7904,8579&Values=34,46,51,63,77,87,91,102,140,222,227,283,442,646,656,1184,1255,1311,1405,1431,1716,1767,1785,1798,1925,1945,1970,2217,2299,2310,2326,2352,2678,2727,2767,2862,2942,3140,3347,3632,3636,3638,3890,3904,4080,448
    • Gary Edwards
       
      DOT chief technology officer Tim Schmidt DOT's CIO Daniel Mintz Federal Department of Transportation
  •  
    Whoa, those government desktops add up quickly.  This Vista ban will immediately effect over 50,000 desktops, with tens of thousands more possibly impacted by the IE 7.0 ban.  The MS Exchange/SharePoint Hub juggernaut is based on IE 7.0, which is not available for Windows 2000 - MSOffice 2000 desktops.

    Lack of Vista Stack compatibility with non Microsoft application is given as the reason for the ban.  But notice the "alternatives" to Vista mentioned; Novel SuSE and Apple Mac.  What kind of interop - compatibility do they offer?  My guess is ZERO!

    The reality is that the DOT is trapped.  My advice would be stay exactly where they are, keeping the current MSOffice desktop installs running.  Then, install the Foundation's daVinci ODF plugin for MSOffice. 

    This will insure that Windows OS and  MSOffice bound business processes can continue to function without disruption.  Win32 APi based applications like those mentioned in the article can continue.  Critical day to day business processes, workgroup and workflow related activities can continue without disruption or costly re engineering demanded by a cross platform port.

    What daVinci doe sdo is move the iron triangle that binds Windows-MSOffice applications to business processes and documents, to an ODF footing.  Once on a ODF footing, the government can push forward with the same kind of workgroup - workflow - intelligent docuemnt - collaborative computing advnaces that the Vista Stack was designed to deliver.  Only this push will involve the highly competitive "the customer is sovereign" environment of ODF ready desktop, server, device and Web 2.0 systems.  End of Redmond lock-in.  End of the costly iron triangle and the force march upgrade treadmill that so enriches Microsoft.

    So what's not to like?  We can do this.
    ~ge~

    http://docs.google.com/View?docID=dghfk5w9_20d2x6rf&revi
Gary Edwards

Open XML blogging in 2007 - Doug Mahugh - Site Home - MSDN Blogs - 0 views

  •  
    At the height of the Document Wars, Doug Mahugh posted this year end, month to month, blow by blow list of blog assaults. I stumbled upon Doug's collection following up on a recent (December 20th, 2010) eMail comment from Karl.  Karl had been reading the infamous "Hypocrisy 101" blog written by Jesper Lundstocholm:  http://bit.ly/hgCVLV Recently i was researching cloud-computing, following the USA Federal Government dictate that cloud-computing initiatives should get top priority first-consideration for all government agency purchases.  The market is worth about $8 Billion, with Microsoft BPOS and Google Apps totally dominating contract decisions in the early going.  The loser looks to be IBM Lotus Notes since they seem to have held most of systems contracts. So what does this have to do with Hypocrisy 101? To stop Microsoft BPOS, IBM had to get a government mandate for ODF and NOT OOXML.  The reason is now clear.  Microsoft BPOS is dominating the early rounds of government cloud-computing contracts because BPOS is "compatible" with the legacy MSOffice desktop productivity environment.  Lotus symphony is not.  Nor is OpenOffice or any other ODF Office Suite.   This compatibility between BPOS and legacy MSOffice productivity environments means less disruption and re engineering of business process costs as governments make the generational shift from desktop "client/server" productivity to a Web productivity platform - otherwise known as "cloud-computing". IMHO, neither ODF or OOXML were designed for this cloud-computing :: Web productivity platform future.  The "Web" aspect of cloud-computing means that HTML-HTTP-JavaScript technologies will prevail in this new world of cloud-computing.  It's difficult, but not impossible, to convert ODF and OOXML to HTML+ (HTML5, CSS3, Canvas/SVG, JavaScript).  This broad difficulty means that cloud-computing does not have a highly compatible productivity authoring environment designed to meet the transition needs
Jesper Lund Stocholm

Groklaw - Digging for Truth - 6 views

  • You harmed us and our families. You harmed the public, and you will have to live with that judgment from us.
    • Jesper Lund Stocholm
       
      Legendary comment ... :o) "You harmed our families. You harmed the public and you will have to live with that judgement from us"
  •  
    What an amazing conversation. It's true that ODF was NOT designed to be compatible with MSOffice and the legacy binary format. That's not to say there were not considerable efforts within the OASIS Open Office XML TC (ODF) pushing for compatibility. But Sun successfully held off these efforts, insisting that ODF was not designed to be compatible with MSOffice or the MSOffice binaries. Many asked the obvious question, "How are end users supposed to convert their information (billions of legacy "in-process" binary documents) to ODF if ODF is not designed for that conversion?" Stellent, represented by Phil Boutros, and Corel, represented by Paul Langille and Tom Magliery, were particularly obsessed with this problem. Without "compatibility", how were end users supposed to convert their documents? Needless to say, Sun prevailed. ODF is 100% perfectly compatible with OpenOffice/StarOffice, by design. It is not compatible with the billions of "in-process" compound business documents essential to world trade, commerce and information exchange. What a shame, ~ge~
Gary Edwards

LibreOffice 4.3 boosts document compatibility | InfoWorld - 0 views

  •  
    "Version 4.3 of LibreOffice, the free and open source productivity suite developed by the Document Foundation and derived from the OpenOffice.org project, was released today. Aside from the usual array of bug fixes and new features designed to make it more cross-compatible with Microsoft Office, version 4.3 has features that give files from legacy Macintosh productivity software a new lease on life. Take control! 30 essential OS X command-line tips Go beyond the graphical user interface and take full advantage of Mac OS X at the command line READ NOW Most of the improvements around file handling in 4.3 involve better support for various aspects of the Office Open XML (OOXML) format used by Microsoft for its productivity software. LibreOffice users have often complained of opening Word 2010 or Word 2013 documents and finding that the formatting had been mangled or features like annotations hadn't survive being resaved in LibreOffice. Version 4.3 preserves many more of the attributes used in OOXML documents, such as style attributes for text and images. Also new to this edition of LibreOffice is import support for document formats created by a slew of legacy Macintosh applications: BeagleWorks, ClarisWorks, Claris Resolve, GreatWorks, MacWorks, SuperPaint, and Wingz. Likewise, Microsoft Works spreadsheets and databases -- not just word processing documents -- can now also be imported into LibreOffice. Another change, which might not directly affect many users but hints at how the refactoring of LibreOffice's code is reaching many legacy issues, involves the lengths of paragraphs. Previously, paragraphs in a LibreOffice document couldn't exceed 65,000 characters due to a bug in the underlying OpenOffice.org code that had persisted for over a decade and remained unclosed. Other changes include comments that can now be "printed in the document margin, formatted in a better way, and imported and exported," according to the Document Foundation; better behaviors for sp
Gary Edwards

The End of ODF & OpenXML - Hello ODEF! - 0 views

  •  
    Short slide deck of Barbara Held's February 28th, 2007 EU IDABC presentation. She introduces ODEF, the "Open Document Exchange Format" which is designed to replace both ODF and OpenOfficeXML. ComputerWorld recently ran a story about the end of ODF, as they covered the failure of six "legislative" initiatives designed to mandate ODF as the official file format. While the political treachery surrounding these initiatives is a story in and of itself, the larger story, the one that has world wide reverberations, wasn't mentioned. The larger ODF story is that ODF vendors are losing the political battles because they are unable to provide government CIO's with real world solutions. Here are three quotes from the California discussion that really say it all: "Interoperability isn't just a feature. It's the basic requirement for getting your XML file format and applications considered"..... "The challenge is that of migrating our existing documents and business processes to XML. The question is which XML? OpenDocument or OpenXML?" ....... "Under those conditions, is it even possible to implement OpenDocument?" ....... Bill Welty, CIO California Air Resource Board wondering if there was a way to support California legislative proposal AB-1668. This is hardly the first time the compatibility-interoperability issue has challenged ODf. Massachusetts spent a full year on a pilot study testing the top tier of ODF solutions: OpenOffice, StarOffice, Novell Office and IBM's WorkPlace (prototype). The results were a disaster for ODF. So much so that the 300 page pilot study report and accompanying comments wiki have never seen the light of day. In response to the disastrous pilot study, Massachusetts issued their now infamous RFi; a "request for information" about whether it's possible or not to write an ODF plugin for MSOffice applications. The OpenDocument Foundation responded to the RFi with our da Vinci plugin. The quick descriptio
Gary Edwards

Independent study advises IT planners to go OOXML - 0 views

  • From: Bill Gates Sent: Saturday, December 5 1998 To: Bob Muglia, Jon DeVann, Steven Sinofsky Subject : Office rendering "One thing we have got to change in our strategy - allowing Office documents to be rendered very well by other peoples browsers is one of the most destructive things we could do to the company. We have to stop putting any effort into this and make sure that Office documents very well depends on PROPRIETARY IE capabilities. Anything else is suicide for our platform. This is a case where Office has to avoid doing something to destroy Windows. I would be glad to explain at a greater length. Likewise this love of DAV in Office/Exchange is a huge problem. I would also like to make sure people understand this as well." Tuesday, August 28, 2007
  • 3.2.2.2. A pox on both your houses! gary.edwards - 01/22/08 Hi Robert, What you've posted are examples of MSOffice ”compatibility settings” used to establish backwards compatibility with older documents, and, for the conversion of alien file formats (such as various versions of WordPerfect .wpd). These compatibility settings are unspecified in that we know the syntax but have no idea of the semantics. And without the semantic description there is no way other developers can understand implementation. This of course guarantees an unacceptable breakdown of interoperability. But i would be hesitant to make my stand of rejecting OOXML based on this issue. It turns out that there are upwards of 150 unspecified compatibility settings used by OpenOffice/StarOffice. These settings are not specified in ODF, but will nevertheless show up in OpenOffice ODF documents – similarly defying interoperability efforts! Since the compatibility settings are not specified or even mentioned in the ODF 1.0 – ISO 26300 specification, we have to go to the OOo source code to discover where this stuff comes from. Check out lines 169-211. Here you will find interesting settings such as, “UseFormerLineSpacing, UseFormerObjectPositioning, and UseFormerTextWrapping”. So what's going on here?
    • Gary Edwards
       
      ..... response to Robert Crocker concerning Mary Jo's article, "Independent study advises IT planners to go OOXML". 3.2.2. So this is well documented? Robert Crocker - 01/14/08 : Mind explaining these functions to us then? - Section 2.15.3.6 page 2161, autoSpaceLikeWord95. - Section 2.15.3.26 page 2199, footnoteLayoutLikeWW8. - Section 2.15.3.31 page 2209, lineWrapLikeWord6. - Section 2.15.3.32 page 2210, mwSmallCaps. - Section 2.15.3.41 page 2225, shapeLayoutLikeWW8. - Section 2.15.3.51 page 2245, suppressTopSpacingWP
Gary Edwards

5 Things Microsoft Must Do To Reclaim Its Mojo In 2008 -- InformationWeek - 0 views

  • Instead of fighting standards, Microsoft (NSDQ: MSFT) needs to get on board now more than ever. With open, Web-based office software backed by the likes of IBM (NYSE: IBM) (think Lotus Symphony) and Google (NSDQ: GOOG) now a viable option, users—especially businesses frustrated by Microsoft's format follies (many are discovering that OOXML is not even fully backwards-compatible with previous versions of Microsoft Word)--can now easily switch to an online product without having to rip and replace their entire desktop infrastructure.
    • Gary Edwards
       
      This article discusses how Microsoft might change their ways and save the company. This particular quote concerns Microsoft support for standards, and their fight to push MS OOXML through ISO as an alternative to ISO approved ODF 1.0.
      The thing is, ODF was not designed for the conversion of MSOffice documents, of which there are billions. Nor was ODF designed to be implemented by MSOffice. ODF was designed exactly for OpenOffice, which has a differnet model for impementing basic docuemnt structures than MSOffice.
      So a couple of points regardign this highlight:
      The first is that IBM's Lotus Symphony is NOT Open Source. IBM ripped off the OpenOffice 1.1.4 code base back when it was dual licensed under both SSSL and LGPL. IBM then closed the source code adding a wealth of proprietary eXtensions (think XForms and Lotus Notes connections). Then IBM released the proprietary Symphony as a free alternative to the original Open Source Community "OpenOffice.org".
      If Microsoft had similarly ripped off an open source community, there would be hell to pay.
      Another point here is the mistaken assumption that users can easily switch from MSOffice to an on-line product like Google Docs or ZOHO "without having to rip our and replace their entire desktop infrastructure."
      This is a ridiculous assumption defied by the facts on the ground. Massqchusetts spent two years trying to migrate to ODF and couldn't do it. Every other pilot study known has experienced the same difficulties!
      The thing about Web 2.0 alternatives is that these services can not be integrated into existing business processes and MSOffice workgroup bound activities. The collaborative advantages of Web 2.0 alternatives are disruptive and outside existing workflows, greatly marginalizing their usefulness. IF, and that's a big IF, MSOffice plug-ins were successful in the high fidelity round trip conversion of wor
  • Microsoft in 2008 could make a bold statement in support of standards by admitting that its attempt to force OOXML on the industry was a mistake and that it will work to develop cross-platform compatibility between that format and the Open Document Format
    • Gary Edwards
       
      It's impossible to harmonize two application specific file formats. The only way to establish an effective compatibility between ODF and OOXML would be to establish a compatibility between OpenOffice and MSOffice.
      The problem is that neither ODF or OOXML were developed as generirc file formats. They are both application specific, directly reflecting the particular implementation models of OOo and MSOffice.
      Sun and the OASIS ODF TC are not about to compromise OpenOffice feature sets and implmentation methods to improve interop with MSOffice. Sun in particular will protect the innovative features of OpenOffice that are reflected in ODF and stubbornly incompatible with MSOffice and the billions of binary documents. This fact can easily be proven be any review of the infamous "List Enhancement Proposal" that dominated discussions at the OASIS ODF TC from November of 2006 through May of 2007.
      So if Sun and the OASIS ODF TC refuse to make any efforts towards compatibility and imporved interop with MSOffice and the billions of binary docuemnts seekign conversion to ODF, then it falls to Microsoft to alter MSOffice. With 550 million MSOffice desktops involved in workgroup bound business processes, any changes would be costly and disruptive. (Much to the glee of Sun and IBM).
      IBM in particular has committed a good amount of resources and money lobbying for government mandates establishing ODF as the accepted format. this would of course result in a massively disruptive and costly rip out and replace of MSOffice.
      Such are the politics of ODF.
Gary Edwards

A pox on both your houses! | Independent study advises IT planners to go OOXML - 0 views

  • What you've posted are examples of MSOffice ”compatibility settings” used to establish backwards compatibility with older documents, and, for the conversion of alien file formats (such as various versions of WordPerfect .wpd). These compatibility settings are unspecified in that we know the syntax but have no idea of the semantics. And without the semantic description there is no way other developers can understand implementation. This of course guarantees an unacceptable breakdown of interoperability. But i would be hesitant to make my stand of rejecting OOXML based on this issue. It turns out that there are upwards of 150 unspecified compatibility settings used by OpenOffice/StarOffice. These settings are not specified in ODF, but will nevertheless show up in OpenOffice ODF documents – similarly defying interoperability efforts! Since the compatibility settings are not specified or even mentioned in the ODF 1.0 – ISO 26300 specification, we have to go to the OOo source code to discover where this stuff comes from. Check out lines 169-211. Here you will find interesting settings such as, “UseFormerLineSpacing, UseFormerObjectPositioning, and UseFormerTextWrapping”.
Gary Edwards

LOL :: Microsoft's Jean Paoli on the XML document debate - 0 views

  • What’s distinctive about the goals of OOXML? Primarily, to have full fidelity with pre-existing binary documents created in Microsoft Office. “What people want is to make sure that their billions of important documents can be saved in a format where they don’t lose any information. As a design goal, we said that those formats have to represent all the information that enables high-fidelity migration from the binary formats”, says Paoli. He mentions work with institutions including the British Library and the US Library of Congress, concerned to preserve the information in their electronic archive. I asked Paoli if such users could get equally good fidelity by converting their documents to ODF. “Absolutely not,” he says. “I am very clear on that. Those two formats are done for different reasons.” What can go wrong? Paoli gives as an example the myriad ways borders can be drawn round tables in Microsoft Office and all its legacy versions. “There are 100 ways to draw the lines around a table,” he says. “The Open XML format has them all, but ODF which has not been designed for backward compatibility, does not have them. It’s really the tip of the iceberg. So if someone translates a binary document with a table to ODF, you will lose the framing details. That is just a very small example.”
  • “Open Document Format and Office Open XML have very different goals”, says Paoli, responding to the claim that the world needs only one standard XML format for office documents. “Both of them are formats for documents … both are good.”
    • Gary Edwards
       
      The door should have been slammed shut on OOXML near five years ago when, on December 14th, 2006, at the very first OASIS ODF TC meeting, Stellent's Phil Boutros proposed that the charter include, "compatibility with existing file formats and interoperability with existing applications" as a priority objective.
  • I put it to Paoli that OOXML is hard to implement because of all its legacy support, some of which is currently not well documented. “I don’t believe that at all. It’s actually the opposite,” he says. He make the point that third parties like Corel, which have previously implemented support for binary formats like .doc and .xls, should find it easy to transition to OOXML. “We believe Open XML adoption by vendors like Corel will be very easy because they have already been doing 90% of the work, doing the binary formats. The features are already there.”
    • Gary Edwards
       
      WordPerfect does an excellent import of MSWord .doc documents. But there is no conversion! It's a read only rendering. Once you start editing the document in WP, all kinds of funny things happen, and the perfect fidelity melts away like the wicked witch of west in a bucket full of water.
  • ...5 more annotations...
  • Another benefit Paoli claims for OOXML is performance. “A lot of things are designed differently because we believe it will work faster. The spreadsheet format has been designed for very big spreadsheets because we know our users, especially in the finance industry, use very large spreadsheets.
    • Gary Edwards
       
      Wrong. The da Vinci plug-in prototype we demonstrated to Massachusetts on June 19th, 2006 proved that there is little or no difference in spreadsheet performance between a OOXML file, and an ODF file.

      In fact, ODF version of the extremely large test file beat the OOXML load by 12 seconds.

      Where the performance difference comes in is at the application level. MS Excel can load a OOXML version of a large spreadsheet faster than OpenOffice can load an ODF version of that same spreadsheet.

      If you eliminate the application differential, and load the OOXML file and the ODF version of that same spreadsheet into a plug-in enabled Excel, the performance differences are negligible.

      The reason for this is that the OOXML plug-in for Excel has a conversion overhead identical to the da Vinci plug-in for Excel. It has nothing to do with the file format, and everythign to do with the application.

      ~ge~
  • Paoli points to the conversion errors as evidence of how poorly ODF can represent legacy Office documents. My hunch is that this has more to do with the poor quality of the converter.
    • Gary Edwards
       
      Note that these OASIS ODF TC November 20th iX "interoperability enhancement" suggestions were submitted by Novell as part of their effort to perfect a OOXML plug-in for OpenOffice!!!!

      "Lists" were th first of these iX items to be submitted as formal proposal. And Sun fought that list proposal viciously for the next four months. The donnybrook resulted i a total breakdown of the ODF consensus process. But, it ensured that never again would anyone be stupid enough to challenge Sun's authority and control of the OASIS ODF TC.

      Sun made it clear that they would viciously oppose any other efforts to establish interoperability with existing Microsoft documents, applications, processes effort.

      Point taken.

      ~ge~
  • the idea that Sun is preparing a reference implementation of OOXML is laughable.
    • Gary Edwards
       
      Sorry Tim. It's true. Sun and Novell are working together to develop native OOXML file support in OpenOffice. You can find this clearly stated in the Gullfoss Planet OpenOffice blogs.

      The funny thing is that Sun will have to implement and support the November 20th iX enhancements submitted by Novell!! (Or, the interoperability frameworks also submitted by Novell in February of 2007). There is simply no other way for OpenOffice to implement OOXML with the needed fidelity.

      ~ge~
  • One of new scenarios enabled by the “custom xml parts” (again, if you read their blogs, you must have heard of this stuff) is the ability to bind xml sources and a control+layout so that it enables the equivalent of data queries (we’ve had in Excel for many years already), just with a source which is part of the package, contrary to the typical external data source connection. Well this stuff, besides the declaration (which includes, big surprise, GUIDs and stuff like that) requires the actual Office 2007 run-time to work. So whenever MS says this stuff is interoperable, they cannot mean you can take this stuff away in another application. Because you can’t. This binding is more or less the same than the embedding of VBA macros. It’s all application-specific, and only Microsoft’s own suite knows how to instantiate this stuff.
    • Gary Edwards
       
      Stephan whacks this one out of the park! Smart Documents will replace VBa scripts, macros and OLE functionality going forward. It's also the data binding - workflow and metadata model of the future. And it's all proprietary!

      It's the combination of OOXML plus the MSOffice- Vista Stack specific Smart Documents that will lock end users into the Vista Stack for years to come.

      Watch out Google!

      ~ge~
  • Has Microsoft published the .doc spec publicly? Then why should ODF worry about the past? It’s not ODF’s concern to worry about Microsoft’s past formats. (Understand that the .doc format alone changed six times in the last eight versions of Office!) That’s Microsoft’s legacy problem, not ODF’s.
    • Gary Edwards
       
      There really is no need to access the secret binary blueprints. The ACME 376 plug-in demonstration proves this conclusively. The only thing the ACME 376 demo lacks is that we didn't throw the switch on the magic key to release all VBa scripts, macros and OLE bindings to ACME. But that can be done if someone is serious about converting the whole shebang of documents, applications and processes.

      The real problem is that although ACME 376 proves we can hit the high fidelity required, it is impossible to effectively capture that fidelity in ODF without the iX interoperability enhancements. The world expects ODF interoperability. But as long as Sun opposes iX, we can't pipe from ACME 376 to ODF.

      ~ge~
  •  
    Tim Anderson interviews Microsoft's Jean Paoli about MOOXML and ODF.    Jean Paoli of course has the predictable set of answers.  But Tim anderson provides us with some interesting insights and comments of his own.  There is also a gem of a comment from Stephane Rodriquez, the reknown spreadsheet expert.

    The bottom line for Microsoft has not changed.  MOOXML exists because of the need for an XML file format compatible with the legacy of existing MSOffic ebinary documents.  He claims that ODF is not compatible, and offers the "page borders" issue as an example.

    Page borders?  What's that got to do with the ODF file format?   These are application specific, application bound proprietary graphics that can not be ported to any other application - like OpenOffice.  The reason has nothign whatsoever to do with ODF and everything to do with the fact that the page border library is bound to MSOffice and not available to other applications like OpenOffice. 

    So here is an application specific feature tha tJean Paoli claims can not be expressed in ODF, but can in MOOXML.  But when are running the da Vinci ODF plugin in MSWord, there is no problem whatsoever in capturing the page borders in ODF!!!!!!!!!!!!!!!!!!!!!!!!!!!  No problem!!!!!!!!!!

    The problem is opening up that same da Vinci MSWord document in OpenOffice.  That's where the page borders are dropped.  The issue is based entirely on the fact that OpenOffice is unable to render these MSWord specific graphics bound to an MSOffice only library.

    If however we take that same page border loaded da Vinci MSWord document, and send it half way across the world to another MSWord desktop running da Vinci, the da Vinci plugin easily loads the ODF document into MSWord where it is perfectly rendered, page borders and all!!!!!!!!

    Now i will admit that this is one very difficult issue to understand.  If not f
  •  
    Great interview. Tim can obviously run circles around poor Jean Paoli.
1 - 20 of 85 Next › Last »
Showing 20 items per page