Skip to main content

Home/ Document Wars/ Group items tagged Office-Compatibility

Rss Feed Group items tagged

Gary Edwards

Between a rock and a hard place: ODF & CIO's - Where's the Love? - 0 views

  • So I'm disappointed. And not just on behalf of open documents, but on behalf of the CIOs of this country, who are now caught between a rock and a hard place, without a paddle to defend themselves with if they won't to do anything new, innovative and necessary, if a major vendor's ox might be gored in consequence. After the impressive lobbying assault mounted over the past six months against open document format legislation, I expect you won't be hearing of many state IT departments taking the baton back from their legislators.    And who can blame them? If they tried, it wouldn't be likely to be anything as harmless as an open document format that would bite them in the butt.
  •  
    Andy Updegrove weighs in on the wave of ODF legislative failures first decribed by Eric Lai and Gregg Keizer compiled the grim data in a story they posted at ComputerWorld last week titled  Microsoft trounces pro-ODF forces in state battles over open document formats.


    Andy believes that it is the failure of state legislators to do their job that accounts for these failures.  He provides three reasons for this being a a failure of legislative duty.  The most interesting of which is claim that legislators should be protecting CIO's from the ravages of aggressve vendors. 


    The sad truth is that state CIO's are not going to put their careers on the line for a file format after what happened in Massachusetts.


    Andy puts it this way, "
      

    And second, in a situation like this, it is a cop out for legislatures to claim that they should defer to their IT departments to make decisions on open formats.  You don't have to have that good a memory to recall why these bills were introduced in the first place: not because state IT departments aren't a good place to make such decisions, but because successive State CIOs in Massachusetts had been so roughly handled in trying to make these very decisions that no state CIO in his or her right mind was likely to volunteer to be the next sacrificial victim.
    As both Peter Quinn and Louis Gutierrez both found out, trying to make responsible standards-related decisions whe
Gary Edwards

Is It Game Over? - ODF Advocate Andy UpDegrove is Worried. Very Worried - 0 views

  • This seems to me to be a turning point for the creation of global standards. Microsoft was invited to be part of the original ODF Technical Committee in OASIS, and chose to stand aside. That committee tried to do its best to make the standard work well with Office, but was naturally limited in that endeavor by Microsoft's unwillingness to cooperate. This, of course, made it easier for Microsoft to later claim a need for OOXML to be adopted as a standard, in order to "better serve its customers." The refusal by an incumbent to participate in an open standards process is certainly its right, but it is hardly conduct that should be rewarded by a global standards body charged with watching out for the best interests of all.
  •  
    Andy UpDegrove takes on the issue of Microsoft submitting their proprietary "XML alternative to PDF" proposal to Ecma for consideration as an international standard.  MS XML-PDF will compliment ECMA 376 (OOXML - OfficeOpenXML) which is scheduled for ISO vote in September of 2007.  Just a bit over 60 days from today.

    Andy points out some interesting things; such as the "Charter" similarities between MS XML-PDF and MS OOXML submisssions to Ecma:

    MS XML-PDF Scope: The goal of the Technical Committee is to produce a formal standard for office productivity applications within the Ecma International standards process which is fully compatible with the Office Open XML Formats. The aim is to enable the implementation of the Office Open XML Formats by a wide set of tools and platforms in order to foster interoperability across office productivity applications and with line-of-business systems. The Technical Committee will also be responsible for the ongoing maintenance and evolution of the standard.   Programme of Work: Produce a formal standard for an XML-based electronic paper format and XML-based page description language which is consistent with existing implementations of the format called the XML Paper Specification,…[in each case, emphasis added]

    If that sounds familiar, it should, because it echoes the absolute directive of the original OOXML technical committee charter, wh
Gary Edwards

Amazing Stuff: ThinkFree Office Compatibility with MSOffice compared to OpenOffice Comp... - 0 views

  •  
    This is amazing stuff. With all the talk about OpenOffice ODF compatibility problems with existing MSOffice productivity environments and documents, this comparison is stunning. I stumbled across this Compatibility Comparison reading this article: ThinkFree Set to Launch The First Complete Android Office Suite. Documents To Go is currently the only provider of Word and Excel documents on Android. The ThinkFree Office comparisons to OpenOffice cover a number of familiar compatibility issues, with layout at the top of the list. ThinkFree Write 3.5 vs OpenOffice Writer 3.0 ".....When using a word processor to create documents, you really shouldn't have to worry about whether your client will be able to see the document as you intended." ".... However, if you use a low-cost solution like OpenOffice, you should be prepared for frustrations and disappointments....."
Gary Edwards

OASIS ODF: List Proposal Enhancement Vote Deadline on Wednesday | Gary Edwards - 0 views

  •  
    Thanks to Paul for digging this up. Who would have guessed that years later, these same issues hang like a dark shroud on the future of ODF? Note also that June 1st of 2007 was the cut off date for ODF 1.2 proposals and recommendations. The OpenFormula and Metadata SC's were rushing to make the cutoff. The List Enhancement proposal itself was just one of many enhancements submitted by Florian Reuter in November of 2006, designed to greatly improve ODF compatibility with MSOffice "ODF". By November of 2006, thanks largely to the Massachusetts Pilot Study, there were a number of ODF plug-ins for MSOffice. All were capable of producing perfectly compliant ISO 26300 ODF, but falling far short of public expectations of high fidelity interop with OpenOffice ODF. Sound familiar? Everyone knew that it was only a matter of time before Microsoft was pressed into providing MSOffice ODF support. There was no doubt that they would face the exact same interop challenges as the many independent plug-in efforts. Hence the stepped up efforts by many at the OASIS ODF to "fix" ISO 26300! At the time of the List Enhancement Proposal, we had increasing evidence from the many pilot studies that ODF was impossible to implement in business and workgroup environments where the MSOffice productivity environment was the defining platform. ODF was not designed to be compatible with MSOffice or the binary documents so critical to business processes bound to this environment. OpenXML was designed exactly to be compatible with these environments. Unless ODF fixed it's compatibility/interoperability problems there was no way for the independent plug-ins to provide a reasonable ODF implementation alternative to OpenXML. And even if Microsoft did produce an MSOffice ODF compliant with ISO 26300, these productivity environments would remain entirely locked. The world expected ODF to be compatible, interoperable, Web ready, and fully capable of cracking open the iron grip Mic
Gary Edwards

How Microsoft Ratted Itself Out Of Office | Michael Hickins | BNET - 0 views

  •  
    Another good article form Michael Hickins, this time linking the success of Google Wave to the success of Microsoft OOXML. Rob Weir jumps in to defend , well, i'm not sure. I did however respond. Excerpt: Developers hoping to hitch a ride on Google's Wave have discovered that Microsoft may have unwittingly helped them resolve the single greatest problem they needed to overcome in order to challenge the dominance of Office. When Microsoft set out to create Office 2007 using a brand new code base - Office Open XML (OOXML) - it needed to accomplish two goals: make it compatible with all previous versions of Office, and have it accepted as a standard file format for productivity tools so that governments could continue using it while complying with rules forcing them to use standards-based software. ..... Depending on your perspective, either Microsoft has sowed the seeds of its own undoing, or international standards bodies succeeded in forcing Microsoft to open itself up. Either way, Microsoft has given away the key to compatibility with Office documents, allowing all comers to overcome the one barrier that has heretofore prevented customers from dumping Microsoft's Office suite.
Gary Edwards

Microsoft playing three card monte with XML conversion, with Sun as the "outside man" w... - 0 views

  • In a highly informative post to his Open Stack blog Wednesday, Edwards explains how three key features are necessary for organizations to convert to open formats. These are: Conversion Fidelity - the billions of binaries problem Round Trip Fidelity - the MSOffice bound business processes, line of business integrated apps, and assistive technology type add-ons Application Interop - the cross platform, inter application, cross information domain problem
  •  
    Dana Blankenhorn posted this article back in March of 2007.  It was right at the time when the OASIS ODF TC and Metadata XML/RDF SC (Sub Committee) were going at it hammer and tong concerning three very important file format characteristics needed to fulfill a real world interoperability expectation:

    .... Compatibility - file format level interop -
    :::  backwards compatibility / compatibility with existing file formats, including the legacy of billions of binary Microsoft documents

    ....... Interoperability - application level interop-
    ::::::  application interoperability including interop with all Microsoft applications

Gary Edwards

Microsoft Hit By U.S. DOT Ban On Windows Vista, Explorer 7, and Office 2007 - Technolog... - 0 views

  • »  E-Mail »  Print »  Discuss »  Write To Editor late last year -- can be resolved. "We have more confidence in Microsoft than we would have 10 years ago," says Schmidt. "But it always makes sense to look at the security implications, the value back to the customer, and those kind of issues." The DOT's ban on Vista, Internet Explorer 7, and Office 2007 applies to 15,000 computer users at DOT proper who are currently running the Windows XP Professional operating system. The memo indicates that a similar ban is in effect at the Federal Aviation Administration, which has 45,000 desktop users. Compatibility with existing applications appears to be the Transportation Department's major concern. According to a separate memo, a number of key software applications and utilities in use in various branches of the department aren't Vista compatible. Among them are Aspen 2.8.1, ISS 2.11, ProVu 3.1.1, and Capri 6.5, according to a memo issued by staffers at the DOT's Federal Motor Carrier Safety Administration. Any prolonged ban on new Microsoft technologies by the federal government could have a significant impact on the software maker's bottom line, as Microsoft sells millions of dollars in software to the feds annually. http://as.cmpnet.com/event.ng/Type=count&ClientType=2&AdID=125682&FlightID=75634&TargetID=2625&SiteID=222&AffiliateID=283&EntityDefResetFlag=0&Segments=1411,3108,3448,11291,12119&Targets=2625,2878,7904,8579&Values=34,46,51,63,77,87,91,102,140,222,227,283,442,646,656,1184,1255,1311,1405,1431,1716,1767,1785,1798,1925,1945,1970,2217,2299,2310,2326,2352,2678,2727,2767,2862,2942,3140,3347,3632,3636,3638,3890,3904,4080,448
    • Gary Edwards
       
      DOT chief technology officer Tim Schmidt DOT's CIO Daniel Mintz Federal Department of Transportation
  •  
    Whoa, those government desktops add up quickly.  This Vista ban will immediately effect over 50,000 desktops, with tens of thousands more possibly impacted by the IE 7.0 ban.  The MS Exchange/SharePoint Hub juggernaut is based on IE 7.0, which is not available for Windows 2000 - MSOffice 2000 desktops.

    Lack of Vista Stack compatibility with non Microsoft application is given as the reason for the ban.  But notice the "alternatives" to Vista mentioned; Novel SuSE and Apple Mac.  What kind of interop - compatibility do they offer?  My guess is ZERO!

    The reality is that the DOT is trapped.  My advice would be stay exactly where they are, keeping the current MSOffice desktop installs running.  Then, install the Foundation's daVinci ODF plugin for MSOffice. 

    This will insure that Windows OS and  MSOffice bound business processes can continue to function without disruption.  Win32 APi based applications like those mentioned in the article can continue.  Critical day to day business processes, workgroup and workflow related activities can continue without disruption or costly re engineering demanded by a cross platform port.

    What daVinci doe sdo is move the iron triangle that binds Windows-MSOffice applications to business processes and documents, to an ODF footing.  Once on a ODF footing, the government can push forward with the same kind of workgroup - workflow - intelligent docuemnt - collaborative computing advnaces that the Vista Stack was designed to deliver.  Only this push will involve the highly competitive "the customer is sovereign" environment of ODF ready desktop, server, device and Web 2.0 systems.  End of Redmond lock-in.  End of the costly iron triangle and the force march upgrade treadmill that so enriches Microsoft.

    So what's not to like?  We can do this.
    ~ge~

    http://docs.google.com/View?docID=dghfk5w9_20d2x6rf&revi
Gary Edwards

Study Shows Office Alternatives Failing to Sway Microsoft Users -- Microsoft Certified ... - 0 views

  •  
    Interesting report from Forrester on Desktop Productivity.  It seems everyone is asking about alternatives to MSOffice, but coming away empty handed.  Sounds like everyone would like to drop MSOffice, but find the alternatives wanting.  IMHO, the Web based alternatives are long on collaboration but short on productivity.   Compound Documents, Reports and Forms are the fuel that powers legacy workgroup productivity environments.  Web Productivity platforms have a long way to go before they can provide effective, worker facing authoring systems capable of replacing binding and messaging internals such as OLE, ODBC, MAPI, ActiveX, COM and DCOM.   There also seems to be considerable confusion about the difference between Web based authoring alternatives to MSOffice, and Web based Productivity Platforms.  MSOffice is the authoring system for desktop/WorkGroup productivity environments.  But having this authoring system wouldn't mean much if not for the workgroup connectivity and exchange platform behind it that makes highly productive digital business processes and systems possible. Linked Data, messaging, collaboration, and connectivity API's and HTML+ (HTML5, CSS3, JSON, Canvas/SVG, JavaScript) are  showing up everywhere.  But they are not exclusive to Web based authoring systems.  Any desktop authoring system should be able to take advantage of the emerging productivity platform.   So what's the problem with OpenOffice, Symphony, Zoho and gDocs?  OOo and Symphony can't speak language of the Web; HTML+.  Browser based Zoho and gDocs lack the completeness of a Web productivity environment capable of hosting the business processes currently bound to the Windows WorkGroup productivity environment.  There is no indication that the experts at Forrester understand what should be obvious.   excerpt: According to a new Forrester Research report, IT orgs are still choosing Microsoft Office over its competitors.   Two factors appear to be stumbling bloc
Gary Edwards

Slamming the door shut on MS OOXML - 0 views

  • So your goal is a networked world where metadata is routinely trashed by apps developed by those who are too dumb or otherwise disabled to preserve metadata and only the big boys get to do interoperability, right? So if I send you a document for your editing, I can't count on getting it back with xml:id attributes intact. No thanks, Patrick. That sounds way too much like how things have worked ever since office productivity software first came on the market. In your world, interoperability belongs only to those who can map features 1:1 with the most featureful apps. And that is precisely why OpenDocument never should have been approved as a standard. Your kind of interoperability makes ODF a de facto Sun Microsystems standard wearing the clothing of a de jure standard. Why not just standardize the whole world on Microsoft apps and be done with it? Are two monopolies maintained by an interoperability barrier between them better than one? Fortunately, we don't have to debate the issue because the Directives resolve the issue. You lose under the rules of the game.
  •  
    Marbux on metadata and the language of universal interoperability: Few people are aware of the raging debate that has pushed ODF to the edge. The OASIS ODF TC is split between those who support Universal Interoperability, and those who insist on continuing with limited ODF interoperability.

    ODF (OpenDocument), formally known as Open Office XML, began it's standards life in the fall of 2002 when Sun submitted the OpenOffice file format to OASIS for consideration as a office suite XML fiel format standard. The work on ODF did not start off as a clean slate in that there were near 600 pages of application specific specification from day one of the standards work. The forces of universal interop have sought for years to separate ODF from the application specific features and implementation model of OpenOffice that began with those early specification volumes, and continues through the undue influence Sun continues to have over the ODF specification work.

    Many mistakenly believed that submission of ODF to ISO and subsequent approval as an international standard would provide an effective separation, putting ODF on the track of a truly universal file format.

    Marbux is one of those Universal Interop soldiers who has dug in his heels, cried to the heavens that enough is enough, and demanded the necessary changes to ODF interoperability language.

    This post he recently submitted to the OASIS ODF Metadata SC is a devastating rebuttal to the arguments of those who support the status quo of limited interoperability.

    In prior posts, marbux argues that ISO directives demand without compromise universal interoperability. This demand is also shared by the World Trade Organization directives regarding international trade laws and agreements. Here he brings those arguments together with the technical issues for achieving universal interop.

    It's a devastating argument.

Gary Edwards

LibreOffice 4.3 boosts document compatibility | InfoWorld - 0 views

  •  
    "Version 4.3 of LibreOffice, the free and open source productivity suite developed by the Document Foundation and derived from the OpenOffice.org project, was released today. Aside from the usual array of bug fixes and new features designed to make it more cross-compatible with Microsoft Office, version 4.3 has features that give files from legacy Macintosh productivity software a new lease on life. Take control! 30 essential OS X command-line tips Go beyond the graphical user interface and take full advantage of Mac OS X at the command line READ NOW Most of the improvements around file handling in 4.3 involve better support for various aspects of the Office Open XML (OOXML) format used by Microsoft for its productivity software. LibreOffice users have often complained of opening Word 2010 or Word 2013 documents and finding that the formatting had been mangled or features like annotations hadn't survive being resaved in LibreOffice. Version 4.3 preserves many more of the attributes used in OOXML documents, such as style attributes for text and images. Also new to this edition of LibreOffice is import support for document formats created by a slew of legacy Macintosh applications: BeagleWorks, ClarisWorks, Claris Resolve, GreatWorks, MacWorks, SuperPaint, and Wingz. Likewise, Microsoft Works spreadsheets and databases -- not just word processing documents -- can now also be imported into LibreOffice. Another change, which might not directly affect many users but hints at how the refactoring of LibreOffice's code is reaching many legacy issues, involves the lengths of paragraphs. Previously, paragraphs in a LibreOffice document couldn't exceed 65,000 characters due to a bug in the underlying OpenOffice.org code that had persisted for over a decade and remained unclosed. Other changes include comments that can now be "printed in the document margin, formatted in a better way, and imported and exported," according to the Document Foundation; better behaviors for sp
Gary Edwards

ODF and OOXML - The Final Act - 0 views

  • The format war between Microsoft’s Open Office XML (OOXML) and the open source OpenDocument Format (ODF) has flared up again, right before the looming second OOXML ISO vote in March.
  • “ISO has a policy that, wherever possible, there should only be one standard to maximise interoperability and functionality. We have an international standard for digital documentation, ODF,” IBM’s local government programs executive Kaaren Koomen told AustralianIT.
  • ODF has garnered some criticism for being a touch limited in scope, however, one of its strengths is that it has already been accepted as a worldwide ISO standard. Microsoft’s format on the other hand, has been criticised for being partially proprietary, and even a sly attempt by the software giant to hedge its bets and get in on open standards while keeping as many customers locked into its solutions as possible.
    • Gary Edwards
       
      A "touch limited in scope"? Youv'e got to be kidding. ODF was not defined to be compatible with the billions of MSOffice binary (BIN) documents. Nor was it designed to further interoperability with MSOffice.
      Given that there are over 550 million MSOffice desktops, representing upwards of 95% of all desktop productivity environments, this discrepancy of design would seem to be a bit more than a touch limited in scope!
      Many would claim that this limitation was due to to factors: first that Microsoft refused to join the OASIS ODF TC, which would have resulted in an expanded ODF designed to meet the interoperability needs of the great herd of 550 million users; and second, that Microsoft refused to release the secret binary blueprints.
      Since it turns out that both IBM and Sun have had access to the secret binary blueprints since early 2006, and in the two years since have done nothing to imptove ODF interop and conversion fidelity, this second claim doesn't seem to hold much water.
      The first claim that Microsoft didn't participate in the OASIS ODF process is a bit more interesting. If you go back to the first OASIS ODF Technical Committee meeting, December 16th, 2002, you'll find that there was a proposal to ammend the proposed charter to include the statemnt that ODF (then known as Open Office XML) be compatible with existing file formats, including those of MSOffice. The "MSOffice" reference was of course not included because ODF sought to be application, platform and vendor independent. But make no mistake, the discussion that day in 2002 was about compatibility and the conversion of the legacy BIN's into ODF.
      The proposal to ammend the charter was tabled. Sun objected, claiming that people would interpret the statement as a direct reference to the BIN's, clouding the charter's purpose of application, platform and vendor independence. They proposed that the charter ammendment b
    • Gary Edwards
       
      Will harmonization work? I don't think so. The problem is that the DIN group is trying to harmonize two application specific formats. OpenOffice has one way of implementing basic document structures, and MSOffice another. These differences are directly reflected in the related formats, ODF and OOXML. Any attempts to harmonize ODF and OOXML will require that the applications, OpenOffice and MSOffice, be harmonized! There is no other way of doing this unless the harmonized spec has two different methods for implementing basic structures like lists, tables, fields, sections and page dynamics. Not to mention the problems of feature disparities. If the harmonized spec has two different implementation models for basic structures, interoeprability will suffer enormously. And interoperability is after all the prupose of the standardization effort. That brings us to a difficult compromise. Should OpenOffice compromise it's "innovative" features and methods in favor of greater interoperability with MSOffice and billions of binary documents? Let me see, 100 million OpenOffice installs vs. 550 MSOffice installs bound to workgroup-workflow business processes - many of which are critical to day to day business operations? Sun and IBM have provided the anser to this question. They are not about to compromise on OpenOffice innovation! They believe that since their applications are free, the cost of ODF mandated "rip out and replace" is adequately offset. Events in Massachusetts prove otherwise! On July 2nd, 2007, Sun delivered to Massachusetts the final version of their ODF plug-in for MSOffice. That night, after reviewing and testing the 135 critical documents, Massachusetts made a major change to their ETRM web site. They ammended the ETRM to fully recognize OOXML as an acceptable format standard going forward. The Massachusetts decision to overturn th
  • ...1 more annotation...
    • Gary Edwards
       
      The Burton Group did not recommend that ISO recognize OOXML as a standard! They pointed out that the marketplace is going to implement OOXML by default simply because it's impossible to implement ODF in situations where MSOffice dominates. ISO should not go down the slippery slope of recognizing application-platform-vendor specific standards. They already made that mistake with ODF, and recognizing OOXML is hardly the fix. What ISO should be doign is demanding that ODF fully conform with ISO Interoeprability Requirements, as identified in the May 2006 directive! Forget OOXML. Clean up ODF first.
  •  
    Correcto mundo! There should be only one standard to maximise interoeprability and functionality. But ODF is application specific to the way OpenOffice works. It was not designed from a clean slate. Nor was the original 2002 OpenOffice XML spec designed as an open source effort! Check the OOo source code if you doubt this claim. The ONLY contributors to Open Office XML were Sun employees! What the world needs is in fact a format standard designed to maximise interoperability and functionality. This requires a total application-platofrm-vendor independence that neither ODF or OOXML can claim. The only format that meets these requirements is the W3C's family of HTML-XML formats. These include advancing Compound Docuemnt Framework format components such as (X)HTML-5, CSS-3, XForms, SVG and SMiL.. The W3C's CDF does in fact meet the markeplace needs of a universal format that is open, unencumbered and totally application, platform and vendor independent. The only trick left for CDF is proving that legacy desktop applications can actually implement conversions from existing in-memory-binary-representations to CDF without loss of information.
Gary Edwards

Odf - Converters & the ODF Zero Interop problem - 0 views

  • The ODF-Converter translates OpenXML documents (.DOCX) to Open Document Format (.Open Document Format) (and conversely) for Open XML processing applications. You will find below the list of unsupported features which may be due to standard compatibility issues, or to the translator itself (see rendering issues as discussed in the blog)...
  •  
    Explosive compatibility - interoperability study concerning ODF and MOOXL!  This has Florian's signature written all over it, and it goes right to the heart of the matter.

    David A. Wheeler submitted a comment to the OASIS ODF TC outlining his concerns with this publication.  He suggests that a few minor changes to ODF could greatly improve compatibility - interop issues.  He also figures out that OpenOffice - ODF has more features than MSOffice - MOOXML.  Wha the doesn't ge is that it is these new and innovative features that continue to increase the difficulties of implementing ODF in real world business process workgroups!

    David also ignores the fact that the TC jus tvoted down the Novell "LIt Enhancement Proposal" which was specifically designed to address the compatibility - interop issues outlined in this odf-converter blog!  Given a choice, the ODF TC members chose the new and innovative features of the interop breaking Sun-KOffice "List Enhancement Proposal".   

    The List Enhancement Proposal discussion was so contentious and focused on personal destruction as to represent a total break down of the ODF concensus process.  There is no way that either the Foundation or Novell will ever contribute another compatibility - interop enhancement proposal given the personal assault and determined oppostion of Sun to compatibility - interoperability initiatives.

    The hard lesson the Foundation learned is that if you oppose Sun, you'll get booted out of OASIS!

    The lesson Novell learned is that they are better off working through Ecma 376 to resolve these issues that the public demands be addressed.

    Notice the last line in David's comment, "In any case, the MUCH, MUCH longer list of problems with Microsoft XML format isn't our problem." 

    During the contentious List Enhancement Proposal and the compatibility - interop related Metadata RDF/XML discussions, ODF members freque
  •  
    These are the same guys who just voted against the Novell List Enhancement Proposal that did exactly what the odf-converter blog claims needs to be done if the compatibility-interop problems are to be resolved!
Gary Edwards

AlphaDog Barks Loudly: Why Can't You Guys Just Get Along and Solve MY MSOffice Problem!... - 0 views

  • First, let me say that I am a CIO in a small (20 employees but growing fast) financial services company. I am well aware of how locked-in I am getting with our MS-only shop. I am trying to see my way out of it, but this "ODF vs ODFF" is leaving me very confused and no one is working to clear the fog. I beg for all parties to really work towards some sort of defined understanding. I don't need cooperation. But, what I don't have is well-defined positions from all parties. As it is, I feel safer staying the course with MS right now, honestly. It's what I know vs the mystery of this "open cloud" and all the bellicose infighting. How's that for "in the trenches" data? I posted a comment on Andy's blog, and I will post the same comment here for your group (minor edits): I will admit to being very, very confused by all of this ODF vs ODFF posturing. I will try to put my current thoughts in short form, but it will be a muddled mess. I warned you! From what I gather, the OpenDocument Foundation (ODFF) is attempting to create more of an interop format for working against a background MS server stack (Exchange/Sharepoint). You worry that MS is further cementing their business lock-in by moving more and more companies into dependency on not only the client-side software but also the MS business stack that has finally evolved into a serious competitive set. At that level, and in your view, the "atomic unit" is the whole document. The encoded content is not of immediate concern. ODF is concerned with the actual document content, which ODFF is prepared to ignore. The "atomic unit" is the bits and parts in the document. They want to break the proprietary encodings that MS has that lock people into MSOffice. The stack is not of any immediate concern. So, unless I misunderstand either camp, ODF is first attacking the client end of the stack, and ODFF is attacking the backbone server end of the stack. The former wants to break the MSOffice monopoly by allowing people to escape those proprietary encodings, and the latter wants to prevent the dependency on server software like Exchange and Sharepoint by allowing MS documents to travel to other destinations than MS "server" products. Is this correct? I have yet to see anyone summarize the differences in any non-partisan way, so I am at a loss and not enough information is forthcoming for me to see what's what. The usual diatribe by people closer to the action is to go into the history of ODF or ODFF, talk about old slights and lost fights, and somehow try to pull at emotional heartstrings so as to gain mindshare. Gary's set of comments on this blog have that flavor. This is childish on both sides. Furthermore, the word "orthogonal" comes to mind. I often see people too busy arguing their POV, and not listening to others, when there is no real argument to keep making. It's apple-and-oranges. ODF vs ODFF seems like they are caught in this trap. Everyone wants to win an argument that has no possible win because the participants are not arguing about the same thing. Tell me: Why can't the two parties get along? I can see a "cooperative" that attacks the entire stack. Am I the only one seeing this? Am I wrong? If yes, what's the fundamental difference that prevents cooperation?
  •  
    AlphaDog When asked about the source of his incredible success, the hockey great Wayne Gretzky replied, "I skate to where the puck is going to be, not where it has been." You and i need to do the same. Let me state our position as this: The desktop office suite is where the puck has been. The Exchange/SharePoint Hub is where it's going to be. The E/S Hub is the core of an emerging Microsoft specific web platform which we've also called, the MS Stack. In this stack, MSOffice is relegated to the task of a rich client end user interface into the E/S Hub of business processes and collaborative computing connections. The rest of the MS Stack swirls like a galaxy of services around the E/S Hub. Key to Microsoft's web platform is the gradual movement of MSOffice bound business processes to the E/S Hub where they connect to the rest of the MS Stack. So what now you might ask? Some things to consider before we get down to brass tacks: ... There is a way to break the monopolists MSOffice desktop grip, but it's not a rip out and replace the desktop model. It's a beat them at the E/S Hub model that then opens up the desktop space. And opens it up totally. (this is a 3-5 year challenge though since it's a movement of currently bound business processes). ... It's all about the business processes. Focusing entirely on the file formats is to miss the big picture. ... The da Vinci group's position is this; we believe we can neutralize and re purpose MSOffice by converting in proce
Gary Edwards

LOL :: Microsoft's Jean Paoli on the XML document debate - 0 views

  • What’s distinctive about the goals of OOXML? Primarily, to have full fidelity with pre-existing binary documents created in Microsoft Office. “What people want is to make sure that their billions of important documents can be saved in a format where they don’t lose any information. As a design goal, we said that those formats have to represent all the information that enables high-fidelity migration from the binary formats”, says Paoli. He mentions work with institutions including the British Library and the US Library of Congress, concerned to preserve the information in their electronic archive. I asked Paoli if such users could get equally good fidelity by converting their documents to ODF. “Absolutely not,” he says. “I am very clear on that. Those two formats are done for different reasons.” What can go wrong? Paoli gives as an example the myriad ways borders can be drawn round tables in Microsoft Office and all its legacy versions. “There are 100 ways to draw the lines around a table,” he says. “The Open XML format has them all, but ODF which has not been designed for backward compatibility, does not have them. It’s really the tip of the iceberg. So if someone translates a binary document with a table to ODF, you will lose the framing details. That is just a very small example.”
  • “Open Document Format and Office Open XML have very different goals”, says Paoli, responding to the claim that the world needs only one standard XML format for office documents. “Both of them are formats for documents … both are good.”
    • Gary Edwards
       
      The door should have been slammed shut on OOXML near five years ago when, on December 14th, 2006, at the very first OASIS ODF TC meeting, Stellent's Phil Boutros proposed that the charter include, "compatibility with existing file formats and interoperability with existing applications" as a priority objective.
  • I put it to Paoli that OOXML is hard to implement because of all its legacy support, some of which is currently not well documented. “I don’t believe that at all. It’s actually the opposite,” he says. He make the point that third parties like Corel, which have previously implemented support for binary formats like .doc and .xls, should find it easy to transition to OOXML. “We believe Open XML adoption by vendors like Corel will be very easy because they have already been doing 90% of the work, doing the binary formats. The features are already there.”
    • Gary Edwards
       
      WordPerfect does an excellent import of MSWord .doc documents. But there is no conversion! It's a read only rendering. Once you start editing the document in WP, all kinds of funny things happen, and the perfect fidelity melts away like the wicked witch of west in a bucket full of water.
  • ...5 more annotations...
  • Another benefit Paoli claims for OOXML is performance. “A lot of things are designed differently because we believe it will work faster. The spreadsheet format has been designed for very big spreadsheets because we know our users, especially in the finance industry, use very large spreadsheets.
    • Gary Edwards
       
      Wrong. The da Vinci plug-in prototype we demonstrated to Massachusetts on June 19th, 2006 proved that there is little or no difference in spreadsheet performance between a OOXML file, and an ODF file.

      In fact, ODF version of the extremely large test file beat the OOXML load by 12 seconds.

      Where the performance difference comes in is at the application level. MS Excel can load a OOXML version of a large spreadsheet faster than OpenOffice can load an ODF version of that same spreadsheet.

      If you eliminate the application differential, and load the OOXML file and the ODF version of that same spreadsheet into a plug-in enabled Excel, the performance differences are negligible.

      The reason for this is that the OOXML plug-in for Excel has a conversion overhead identical to the da Vinci plug-in for Excel. It has nothing to do with the file format, and everythign to do with the application.

      ~ge~
  • Paoli points to the conversion errors as evidence of how poorly ODF can represent legacy Office documents. My hunch is that this has more to do with the poor quality of the converter.
    • Gary Edwards
       
      Note that these OASIS ODF TC November 20th iX "interoperability enhancement" suggestions were submitted by Novell as part of their effort to perfect a OOXML plug-in for OpenOffice!!!!

      "Lists" were th first of these iX items to be submitted as formal proposal. And Sun fought that list proposal viciously for the next four months. The donnybrook resulted i a total breakdown of the ODF consensus process. But, it ensured that never again would anyone be stupid enough to challenge Sun's authority and control of the OASIS ODF TC.

      Sun made it clear that they would viciously oppose any other efforts to establish interoperability with existing Microsoft documents, applications, processes effort.

      Point taken.

      ~ge~
  • the idea that Sun is preparing a reference implementation of OOXML is laughable.
    • Gary Edwards
       
      Sorry Tim. It's true. Sun and Novell are working together to develop native OOXML file support in OpenOffice. You can find this clearly stated in the Gullfoss Planet OpenOffice blogs.

      The funny thing is that Sun will have to implement and support the November 20th iX enhancements submitted by Novell!! (Or, the interoperability frameworks also submitted by Novell in February of 2007). There is simply no other way for OpenOffice to implement OOXML with the needed fidelity.

      ~ge~
  • One of new scenarios enabled by the “custom xml parts” (again, if you read their blogs, you must have heard of this stuff) is the ability to bind xml sources and a control+layout so that it enables the equivalent of data queries (we’ve had in Excel for many years already), just with a source which is part of the package, contrary to the typical external data source connection. Well this stuff, besides the declaration (which includes, big surprise, GUIDs and stuff like that) requires the actual Office 2007 run-time to work. So whenever MS says this stuff is interoperable, they cannot mean you can take this stuff away in another application. Because you can’t. This binding is more or less the same than the embedding of VBA macros. It’s all application-specific, and only Microsoft’s own suite knows how to instantiate this stuff.
    • Gary Edwards
       
      Stephan whacks this one out of the park! Smart Documents will replace VBa scripts, macros and OLE functionality going forward. It's also the data binding - workflow and metadata model of the future. And it's all proprietary!

      It's the combination of OOXML plus the MSOffice- Vista Stack specific Smart Documents that will lock end users into the Vista Stack for years to come.

      Watch out Google!

      ~ge~
  • Has Microsoft published the .doc spec publicly? Then why should ODF worry about the past? It’s not ODF’s concern to worry about Microsoft’s past formats. (Understand that the .doc format alone changed six times in the last eight versions of Office!) That’s Microsoft’s legacy problem, not ODF’s.
    • Gary Edwards
       
      There really is no need to access the secret binary blueprints. The ACME 376 plug-in demonstration proves this conclusively. The only thing the ACME 376 demo lacks is that we didn't throw the switch on the magic key to release all VBa scripts, macros and OLE bindings to ACME. But that can be done if someone is serious about converting the whole shebang of documents, applications and processes.

      The real problem is that although ACME 376 proves we can hit the high fidelity required, it is impossible to effectively capture that fidelity in ODF without the iX interoperability enhancements. The world expects ODF interoperability. But as long as Sun opposes iX, we can't pipe from ACME 376 to ODF.

      ~ge~
  •  
    Tim Anderson interviews Microsoft's Jean Paoli about MOOXML and ODF.    Jean Paoli of course has the predictable set of answers.  But Tim anderson provides us with some interesting insights and comments of his own.  There is also a gem of a comment from Stephane Rodriquez, the reknown spreadsheet expert.

    The bottom line for Microsoft has not changed.  MOOXML exists because of the need for an XML file format compatible with the legacy of existing MSOffic ebinary documents.  He claims that ODF is not compatible, and offers the "page borders" issue as an example.

    Page borders?  What's that got to do with the ODF file format?   These are application specific, application bound proprietary graphics that can not be ported to any other application - like OpenOffice.  The reason has nothign whatsoever to do with ODF and everything to do with the fact that the page border library is bound to MSOffice and not available to other applications like OpenOffice. 

    So here is an application specific feature tha tJean Paoli claims can not be expressed in ODF, but can in MOOXML.  But when are running the da Vinci ODF plugin in MSWord, there is no problem whatsoever in capturing the page borders in ODF!!!!!!!!!!!!!!!!!!!!!!!!!!!  No problem!!!!!!!!!!

    The problem is opening up that same da Vinci MSWord document in OpenOffice.  That's where the page borders are dropped.  The issue is based entirely on the fact that OpenOffice is unable to render these MSWord specific graphics bound to an MSOffice only library.

    If however we take that same page border loaded da Vinci MSWord document, and send it half way across the world to another MSWord desktop running da Vinci, the da Vinci plugin easily loads the ODF document into MSWord where it is perfectly rendered, page borders and all!!!!!!!!

    Now i will admit that this is one very difficult issue to understand.  If not f
  •  
    Great interview. Tim can obviously run circles around poor Jean Paoli.
Gary Edwards

Independent study advises IT planners to go OOXML - 0 views

  • From: Bill Gates Sent: Saturday, December 5 1998 To: Bob Muglia, Jon DeVann, Steven Sinofsky Subject : Office rendering "One thing we have got to change in our strategy - allowing Office documents to be rendered very well by other peoples browsers is one of the most destructive things we could do to the company. We have to stop putting any effort into this and make sure that Office documents very well depends on PROPRIETARY IE capabilities. Anything else is suicide for our platform. This is a case where Office has to avoid doing something to destroy Windows. I would be glad to explain at a greater length. Likewise this love of DAV in Office/Exchange is a huge problem. I would also like to make sure people understand this as well." Tuesday, August 28, 2007
  • 3.2.2.2. A pox on both your houses! gary.edwards - 01/22/08 Hi Robert, What you've posted are examples of MSOffice ”compatibility settings” used to establish backwards compatibility with older documents, and, for the conversion of alien file formats (such as various versions of WordPerfect .wpd). These compatibility settings are unspecified in that we know the syntax but have no idea of the semantics. And without the semantic description there is no way other developers can understand implementation. This of course guarantees an unacceptable breakdown of interoperability. But i would be hesitant to make my stand of rejecting OOXML based on this issue. It turns out that there are upwards of 150 unspecified compatibility settings used by OpenOffice/StarOffice. These settings are not specified in ODF, but will nevertheless show up in OpenOffice ODF documents – similarly defying interoperability efforts! Since the compatibility settings are not specified or even mentioned in the ODF 1.0 – ISO 26300 specification, we have to go to the OOo source code to discover where this stuff comes from. Check out lines 169-211. Here you will find interesting settings such as, “UseFormerLineSpacing, UseFormerObjectPositioning, and UseFormerTextWrapping”. So what's going on here?
    • Gary Edwards
       
      ..... response to Robert Crocker concerning Mary Jo's article, "Independent study advises IT planners to go OOXML". 3.2.2. So this is well documented? Robert Crocker - 01/14/08 : Mind explaining these functions to us then? - Section 2.15.3.6 page 2161, autoSpaceLikeWord95. - Section 2.15.3.26 page 2199, footnoteLayoutLikeWW8. - Section 2.15.3.31 page 2209, lineWrapLikeWord6. - Section 2.15.3.32 page 2210, mwSmallCaps. - Section 2.15.3.41 page 2225, shapeLayoutLikeWW8. - Section 2.15.3.51 page 2245, suppressTopSpacingWP
Gary Edwards

Microsoft Will Support ODF! But Only If It Doesn't 'Restrict Choice Among Formats' - 0 views

  • By Marbux posted Jun 19, 2007 - 3:16 PM Asellus sez: "I will not say OOXML is easy to implement, but saying ODF is easier to implement just by looking at the ISO specification is a fallacy." I shouldn't respond to trolls, but I will this time. Asellus is simply wrong. Large hunks of Ecma 376 are simply undocumented. And what's more, absolutely no vendor has a featureful app that writes to that format. Not even Microsoft. There's a myth that Ecma 376 is the same as the Office Open XML used by Microsoft. It is not. I've spend a few hundred hours comparing the Ecma 376 specification (the version of OOXML being considered at ISO) to the information about the undocumented APIs used by MS Office 2007 that recently sprung loose in litigation. See http://www.groklaw.net/p...Rpt_Andrew_Schulman.pdf Each of those APIs *should* have corresponding metadata in the formats, but are not in the Ecma 376 specification.
  •  
    Incredible comment by Marbux!  With one swipe he takes out both Ecma 376 and ODF. 

    Microsoft has written a letter claiming that they will support ODF in MSOffice, but only if ISO approves Ecma 376 as a second office suite XML file format standard.  ODF was approved by ISO nearly a year ago.

    Criticizing Ecma 376 is easy.  It was designed to meet the needs of  a proprietary application, MSOffice, and, to meet the needs of the emerging MS Vista Stack of applications that spans desktop to server to device to web platforms.  It's filled with MS platform dependencies that make it impossibly non interoperable with anything not fully compliant with Microsoft owned API's.

    Criticizing ODF however is another matter entirely.  Marbux points to the extremely poor ODF interoperability record.  If MOOXML (not Ecma 376 - since that is a read only file format) is tied to vendor-application specific MSOffice, then ODF is similarly tied to the many vendor versions of OpenOffice/StarOffice.

    The "many vendor" aspect of OpenOffice is somewhat of a scam.  The interoperability that ODF shares across Novell Office, StarOffice, IBM WorkPlace, Red Office, and NeoOffice is entirely based on the fact that these iterations of OpenOffice are based on a single code base controlled 100% by Sun.  Which is exactly the case with MSOffice.  With this important exception - MOOXML (not Ecma 376) is interoperable across the entire Vista Stack!

    The Vista Stack is comprised of Exchange/SharePoint, MS Live, MS Dynamics, MS SQL Server, MS Internet Server, MS Grove, MS Collaboration Server, and MS Active Directory.   Behind these applications sits a an important foundation of shared assets: MOOXML, Smart Documents, XAML and .NET 3.0.  All of which can be worked into third party, Stack dependent applications through the Visual Studio .NET IDE.

    Here are some thoughts i wou
Gary Edwards

The better Office alternative: SoftMaker Office bests OpenOffice.org ( - Soft... - 0 views

shared by Gary Edwards on 30 Jun 09 - Cached
  • Frankly, from Microsoft's perspective, the danger may have been overstated. Though the free open source crowd talks a good fight, the truth is that they keep missing the real target. Instead of investing in new features that nobody will use, the team behind OpenOffice should take a page from the SoftMaker playbook and focus on interoperability first. Until OpenOffice works out its import/export filter issues, it'll never be taken seriously as a Microsoft alternative. More troubling (for Microsoft) is the challenge from the SoftMaker camp. These folks have gotten the file-format compatibility issue licked, and this gives them the freedom to focus on building out their product's already respectable feature set. I wouldn't be surprised if SoftMaker got gobbled up by a major enterprise player in the near, thus creating a viable third way for IT shops seeking to kick the Redmond habit.
    • Gary Edwards
       
      Wow. Somebody who finally gets it. OpenOffice and OpenOffice ODF were not designed to be compatible with Microsoft Office, the MSOffice productivity environment, and, the legacy of binary documents. Softmaker is not the only Office Suite alternative designed for compatibility with MSOffice. ThinkFree Office and Evermore Office are also proof positive that high level compatibility is possible.
Gary Edwards

Open XML blogging in 2007 - Doug Mahugh - Site Home - MSDN Blogs - 0 views

  •  
    At the height of the Document Wars, Doug Mahugh posted this year end, month to month, blow by blow list of blog assaults. I stumbled upon Doug's collection following up on a recent (December 20th, 2010) eMail comment from Karl.  Karl had been reading the infamous "Hypocrisy 101" blog written by Jesper Lundstocholm:  http://bit.ly/hgCVLV Recently i was researching cloud-computing, following the USA Federal Government dictate that cloud-computing initiatives should get top priority first-consideration for all government agency purchases.  The market is worth about $8 Billion, with Microsoft BPOS and Google Apps totally dominating contract decisions in the early going.  The loser looks to be IBM Lotus Notes since they seem to have held most of systems contracts. So what does this have to do with Hypocrisy 101? To stop Microsoft BPOS, IBM had to get a government mandate for ODF and NOT OOXML.  The reason is now clear.  Microsoft BPOS is dominating the early rounds of government cloud-computing contracts because BPOS is "compatible" with the legacy MSOffice desktop productivity environment.  Lotus symphony is not.  Nor is OpenOffice or any other ODF Office Suite.   This compatibility between BPOS and legacy MSOffice productivity environments means less disruption and re engineering of business process costs as governments make the generational shift from desktop "client/server" productivity to a Web productivity platform - otherwise known as "cloud-computing". IMHO, neither ODF or OOXML were designed for this cloud-computing :: Web productivity platform future.  The "Web" aspect of cloud-computing means that HTML-HTTP-JavaScript technologies will prevail in this new world of cloud-computing.  It's difficult, but not impossible, to convert ODF and OOXML to HTML+ (HTML5, CSS3, Canvas/SVG, JavaScript).  This broad difficulty means that cloud-computing does not have a highly compatible productivity authoring environment designed to meet the transition needs
Gary Edwards

Brian Jones: Open XML Formats : Office Open XML final draft!!! - 0 views

  • # re: Office Open XML final draft!!! @ Wednesday, October 11, 2006 1:46 PM The past incarnations of DrawingML have been chaotic. It would be interesting, out of curiosity, to get an accurate history of what changed over time, perhaps to better understand what is supported in what. Here is my take, I am pretty sure I got at least 50% of it wrong :-) - pre-Windows 95 era, Word, Excel and Powerpoint use their own vector drawing layer used to draw shapes, pictures, diagrams, art and charts. Powerpoint, acquired by Microsoft in 1987, has by far the advanced drawing layer (bi-linear gradients, opacity, ...), codenamed Escher (in reference of the famous mathematician). - In Office 95, it is decided to reuse the Powerpoint vector graphics layer in Word and Excel. Migration begins. - Migration ends with Office 97 where both Word, Excel and Powerpoint use the same vector graphics layer, publicly known as MSO (mso97.dll) - In Office 2000, it's all craze about internet and Word tries to export WYSIWYG html. For that end, mark up extensions must be added to account for the MSO drawing layer. Hence the VML (Vector Markup language). Excel and Powerpoint don't support it. Internet Explorer natively supports VML (Internet Explorer's Direct animation vector drawing layer dismissed for performance reasons). - In Office XP, VML migration ends and both Word, Excel and Powerpoint support VML whenever a document is saved as a "Single web page archive" (.mhtml extension). - In Office 2003, nothing changes. - In Office 12, MSO gets rewritten with backwards compatibility in mind. The vector drawing layer uses more sophisticated drawing functionalities which makes it easier to draw themed, 3D realistic  objects. Technically, the differences are akin to the differences between GDI and GDI+. This new shared library is known as E2O and the corresponding mark up language is known as Drawing ML (Ecma TC45 specs). - In Office 14, ??? perhaps the drawing layer is rewritten, again, to 1) use WPF 2) to allow plugins, hence enabling much more sophisticated do-it-yourself scenarios. Use cases : custom charts ; BI analysis tools. Stephane Rodriguez
  •  
    Stephen Rodriguez gives a quick history of the MSO <> VML <> DrawingML transition in the Microsoft Product line. Note that MSOffice produces two versions of EOOXML file formats. On import os a legacy document, MSOffice will convert the doc and produce a
  •  
    Stephen Rodriguez gives a quick history of the MSO <> VML <> DrawingML transition in the Microsoft Product line. Note that MSOffice produces two versions of EOOXML file formats. On import os a legacy document, MSOffice will convert the doc and produce a
  •  
    Stephen Rodriguez gives a quick history of the MSO <> VML <> DrawingML transition in the Microsoft Product line. Note that MSOffice produces two versions of EOOXML file formats. On import os a legacy document, MSOffice will convert the doc and produce a
Gary Edwards

Why is Microsoft Office so hard to kill? | Applications - InfoWorld - 0 views

  •  
    This article compliments the previous publication, "The better Office Alternative - Softmaker Office". Good stuff! Excerpt: "It's the question that vexes free open source software advocates and commercial competitors around the globe: Why is Microsoft Office so difficult to dislodge from its perch atop the IT heap? Is it the exclusive bundling deals? The deep Software Assurance entrenchment? Steve Ballmer's backroom deal with the devil?" "The answer, of course, is none of the above (though some evidence of a Microsoft-Hell alliance exists). Rather, it's the Office ecosystem -- the vast library of third-party add-ons and vertical solutions built (with copious encouragement from Microsoft) on Office's extensive programmatic model -- that makes Microsoft's suite so hard to kill."
1 - 20 of 69 Next › Last »
Showing 20 items per page