Skip to main content

Home/ trainz/ Group items tagged industry

Rss Feed Group items tagged

steve t

Making the impossible possible. Multiple Multiple Industries. - Trainz Discussion Forums - 0 views

  • Not done it for quite a while but it is fairly easy Best thing is to goto trainzproroutes forum, check lars forum for the protolars manual. It's all to do with the properties i.e ? click on industry then in produce? make it EXTERNAL and link to industry you want to. Manual explains it better than I can . Paul
  • such industries exist for one year ago in Vol4 LaFrance en Trains: there are multiple tracks multi industries with 3 releases : 2, 3 or 4 tracks. On each track you can define "out" or "in" products and between theses queues how and under which rate some products are made... You can also define a "transitionnal" product made by the industry and linked with a first product supplied on one track and this product can be defined as an enter in another queue combined with another product supplied to made a final one ready to load.... Such industries are supllied as "basic"(only tracks are supplied) or as "neutral" with some buildings around each tracks. These industries are compatible with any products even if some of FET are not used...you can make yours...and use them with this system... Name of tracks are editable for scheduling...Ten queues available, Five different process ...on each industry. Here some beer made with water, alcool and hops...
  • On the DLS: "Industry Link" (kuid: 122381:10007) by MiZi. Regards Swordfish PS: There are a lot of other intersting rules made by MiZi on the DLS
  •  
    Not done it for quite a while but it is fairly easy Best thing is to goto trainzproroutes forum, check lars forum for the protolars manual. It's all to do with the properties i.e ? click on industry then in produce? make it EXTERNAL and link to industry you want to. Manual explains it better than I can . Paul
steve t

activateing non industry buildings in trs06 surveyor - Trainz Discussion Forums - 0 views

  •  
    not industry set up some of them are old luck mill, grain elevator, mine operations. what I did is this I took the grain elevtor put it into my layout and then I took a piece of track that is called multi industry new track and placed it next to the grain elevator on the shoot side entered the quee quee list comes up click on oats and then enter info. like to produce, consume or both and loads. is this all I have to do to put a piece of multi industry track new and set the track up and the building will as it told
steve t

the White Pebble Rapids Rail Road, Narrow gauge railroad in Ontario, Canada. [howto page] - 0 views

shared by steve t on 24 Feb 09 - Cached
  •  
    How to use Topo Maps in Trainz by colorado71 A. USING OF GLOBAL MAPPER 1. Configuration of Global Mapper Install Global Mapper on your computer. Download custom_shaders rar from http://trainz.uv.ro/tutorial/files/custom_shaders.rar Unpack the archive and copy the file custom_shaders.txt in the installation folder of Global Mapper. Run Global Mapper and select the option spectrum_trainz from "shader" bar on the program's tool bar. 2. Georeference your topo map Select the map (scanned map, satellite image, topo map etc.) you want to reproduce in trainz. You must know the geographical coordinates (latitude and longitude) of two points on it, so you can georeference it with Global Mapper. From the File Menu of Global Mapper select "Rectify (Georeference) Imagery" click OK and select your image. Open it and the dialog box "Image Rectifier" will appear. Zoom the image over the first point of which coordinates you know, select it, insert its latitudinal and longitudinal position as __/__/___ (for example 21/38/45) and press "add GCP to list." Proceed in the same manner with the second point. Save the image as GeoTIFF. 3. Select your future trainz map a) Open the map thus created with GlobalMapper. From the File Menu select "Export Raster and Elevation Data" - "Export GeoTIFF." In the dialog box which appear select "Export Bounds" and press "Draw a Box." Select the area of your future trainz map and save it as GeoTIFF. b) From the File Menu select "Download Online Imagery/Topo/Terrain Maps" (or simple open the DEM map for the area of your image map). Select the server from which you want to download the digital elevation map (http://seamless.usgs.gov/ or http://srtm.csi.cgiar.org/ for example) and then press OK. From the File Menu select "Export Raster and Elevation Data" - "Export DEM," then select "Export Bounds" in the dialog box, and finally, press "Reset to Last Exported Bounds." B. USING OF MICRODEM 1.
steve t

Question about Industry unload - Trainz Discussion Forums - 1 views

  •  
    "Is it possible to drive a consist to an industry and unload only 1 car. I would like to drive a consist to Goods shed no 1 and unload car no 1, drive to goods shed no 2 and unload car no 2, etc. This seems like a simple thing to do but I can't figure out how to set it up. Any help is appreciated. "
steve t

Industry Training Session? - Trainz Discussion Forums - 0 views

  • I suggest the first thing you do is to search on the Download Station for "Products". When you do this you will find heaps of different things that can be carried. At the same time you will find a lot of "Industry Tracks" available as well.
  • Another suggestion I would make is that when you are building a route, add a spare baseboard to it. On this place some tracks that you can put your choices on and you can also place buildings etc so that you can just go there and click on the item with the get selection in the flyout and you have your modified unit to place at other spots. I found the best way is to just try things out, if it works ok then keep a noteboke and jot it down for future reference.
  • For example using a built-in industry, the coal mine. I create a consist of different hoppers that can carry coal on a empty track. Then using the Get Consist button in Consist mode, I save the consist as Auran Coal Mine - Coal. This gives me a ready made consist to place on any route
steve t

Hungarian MIN, best Multi-Industry New yet! - Trainz Discussion Forums - 0 views

  •  
    I've just been looking at this Multi-Industry New recently put on the DLS;
steve t

Industry Training Session? - Trainz Discussion Forums - 0 views

  •  
    industry tutor
steve t

Industry help ! - Trainz Discussion Forums - 0 views

  • Click on this link and download the zip file: http://rapidshare.com/files/18159640...umentation.zip Inside you will find three documents in Adobe Acrobat (pdf) format: 1. Detailed maps for IndustRail 2. 2. How to drive in Cab Mode. 3. Configuring LARS, ProtoLARS, Multiple Industry New and freight cars.
steve t

http://home.cogeco.ca/~trains/rropsind.txt - 0 views

  • 'rropsind.txt INDUSTRIES LIST 2009 10 01 'File describes industries, loads and cartypes 'CN-Merritt Branch - Stns listed East to West 'Foster -- a sleepy agricultural town F1 Foster Station House Track
steve t

Stone_Ballast_Ironore_Industry - Trainz Discussion Forums - 0 views

  •  
    That industry appears to be created for TRS2006 according to the DS. Change the build number in the config to 2.4 and it should work fine, unless he's used some of the newer scripting features of TRS2006, which is doubtful. Smiley.
steve t

2 Layots I forgot to upload - Trainz Discussion Forums - 0 views

  •  
    Both are Trainz Classic Only ! 1. The L&BR Monoriail Switching layot : a Single board version of the L&BR system using the orginal plans with one change that Lisselton and Ballybunion are made into a loop so you can just run the trains. The layot is passenger and industry active but you will need to setup a session. The layot used items from the ING and DLS. should be no missing items. 2. Ishtropolis : A modified version of Modular city with the buildings changed using Ish, David Drake and other authors items for those who would like a change. There should also be no missing items.
steve t

trigger rule for junction switch - Trainz Discussion Forums - 0 views

  •  
    a session contains all trains and industry instructions etc. If you open the route only as long as you do not delete, rename or alter a sequence that the session uses it will be fine. You can add scenery, texture, create new areas of the route and save. the session will still work. Open your existing session then save it as a different name (Default rule). Now delete all the trains and you are left with only the rules you set up. Save this as the default rule session. When you open this next time all the rules you set up are ready to go without having to redo them, just add trains for a new session and save under a different name in order that the default rule session is not altered. Uploading the route and the default rule session gives everyone the basic setup __________________ http://www.auran.com/TRS2004/DLS.php...textsearchID=1
steve t

Best process for creating routes - Trainz Discussion Forums - 0 views

  • 1. Baseboard Layout 2. Track 3. Texture 4. Topolgy 5. Detailing (roads, cities, etc)
  • here's an infinite number of ways to do it, but I generally do it the same way as previously mentioned. I try to work on no more than 3 or 4 boards at a time although I have worked on 10 or 12 at a time. If you get too many boards out there, the task can seem overwhelming and you can easily become discouraged. I usually work in this order: 1. track (fixing spline point elevations as I go) 2. terrain (bringing terrain to track) 3. adjust remaining terrain to my liking 4. add buildings and roads. sometimes bldgs first and sometimes roads first 5. a base texture, usually copied and pasted 6. signals 7. foilage 8. details I find it important not to work in your signalling and test the route out as you work. If you get the route too big before testing, then it can become a daunting task to find problems with your layout.
  • Well, I remeber an old article, but I don't know where it is. This is how I would do it. 1. Terrain 2. Trackwork 3. Roads 4. Buildings 5. Landscaping 6. Textures This is how I would do it. I look forward to pics
  •  
    My 2.1 cents worth - I like to use existing terain and put on my civil engineering and surveyors hat to find the best locations for tracks and roads. I leave the grey with yellow grid during this process as it helps me to visualize the nuances of the terain. Once track and roads are down, I texture the roadbeds. (And don't forget all the foreign roads that cross your railroad and provide interchange traffic.) Next I place depots, terminal faciilities and industries. Next comes signalling At this point I have an operational railroad. I can choose to run trains or work in adding details. __________________
steve t

more realistic AI-driver attitude - Trainz Discussion Forums - 0 views

  • more realistic AI-driver attitude I would like to see (as an update to all Trainz-Versions or at least as part of any new Trainz-Version) more realistic artifical inteligenced drivers in Trainz.
  • As for the "Ball and Flag" system given in this and another thread, we have the "Wait for Trigger..." driver command, which, I admit, is hidden by default. Go into the driver commands rule to make it visible. With enough forethought, it behaves in exactly the same way, Just on triggers and has to be inserted for every driver using that single track. Though that only works with AI. Us humans have the layout map. Having these automated systems would be a help, but there are already driver commands that work the same way.
  • I agree that the shortest route thing is annoying as well. I've gotten around it by by placing a trackmark on the main track, and I use that when I'm programming the drivers. Another thing I've done is to place a freight car or two on the sidings to force the AI to take the mainline instead of driving through the yard. I agree with Stefan. The routing should be based on locale rather than built-in short-distance seeking algorithms, which I think cause a lot of overhead on the program because the AI system is constantly seeking for an open path. John
  • ...2 more annotations...
  • Similarly the idea of operating a train through a series of switch backs, switching industries, or turning a locomotive on a Wye (all referred to in item 4 in Stefan's original post) can be handled by way of trackmarks. In the case of a switchbacks, simply put a trackmark at each deadend point, so that setting up an AI driver on route with switchbacks becomes "drive to trackmarK 1" followed by "Drive to Trackmark 2", &c. Same way for industry switching and turning trains: assigning trackmarks allows for the dispatcher to provide directions to AI drivers to Drive to the Trackmark for Stefan's Warehouse and uncouple car 123456" then Driver to Trackmark for JCitron's warehouse via trackmark 3, and uncouple car 125789."
  • That remote control system (changing a junction from three miles away) can already be done with triggers or trackmarks (depending on which rule you use).
steve t

Determining Industry Input/Output - Trainz Discussion Forums - 0 views

  • I figured this one out. I could see the functions, but I just couldn't see how they were to be used - There always seemed to be some information missing. The function use is Industry.GetProcessIOProduct(string processname, bool wantinput, int ioindex) I couldn 't figure out where to get ioindex from. But the code below works in all my tests so far
steve t

Industry Training Session? - Page 2 - Trainz Discussion Forums - 0 views

  • I've put together a little demo - mouse click on this link and download the file: http://rapidshare.com/files/211284902/KRL_demo.cdp The cdp file contains the test route, a test session and all the dependencies for the freight car. Just drag and drop the cdp file into the main pane of CM2.
  • I downloaded/commited Philskene's KRL 7 pieces for this asset. All show a yellow puzzle piece with ?. View errors & warnings all show the .pm mesh nolonger unsupported statement and #4 also has a missing black.texture statement in its load_mesh folder. The View Dependencies shows missing bogies :128 and :129. I wonder why CM2 didn't automatically download them since they are dependencies. I download/committed the 2 bogies, :128 shows error can't load shadow/shadow.pm. Looked at the :128 bogey file contents but there's no shadow folder or mesh. The easiest correction for this type of error is to add a mesh-table container to the config.txt file to reference the .pm mesh that is there. Also made a small (32x32) black square .jpg and a black.texture.txt file for the load_mesh folder. Saved and committed. Now, all 7 kuids only show the yellow ! because of the .pm meshes but tried them out and all can be place on a track in Surveyor.
steve t

A Big Thank you to Phil Skene - Page 2 - Trainz Discussion Forums - 0 views

  • Hi Phil, Port Ogden & Northern works well in TS2009 Both of these are faulty CityScene1,<kuid2:184151:224:2> CityScene2,<kuid2:184151:223:2> And they have the same error; Error: Texture 'maincscape.texture' is missing or could not be loaded for mesh 'hash-7A\content cqs47c18240\CityScene1.im'.
  • It is possible to merge the later versions of "Austral Bay" with "IndustRail". If you go to VanDenH at the extreme top right of the route and go into map view you will see that there is a tunnel with a 90 degree left curve leading out of the locomotive refueling depot. To link the two routes together, remove the building that hides the entrance to the tunnel and the track bumper. Merge the IndustRail to Austral Bay and link the sections of track at the joint. The time consuming part is repairing the disconnects at all interactive industries in IndustRail. You will find that at most, if not all, of the industries the track will be unattached at one end. Remember to also do the stations. It's a bummer of a task.
steve t

TPR Forum :: View topic - LARS2 Commodity System (Industries and Tutorials) - 0 views

  • et LARS2 tutorials and Industries from this thread (You must be logged in to be able to download) You need to have TRS2004 and SP1 or later installed to be able to use LARS2. 2004-06-16: New Update. Please download this. Not the same as the one from yesterday. Please note that the products needed are located in a sepparate thread.
steve t

TrainzObjectz - Proteus Yard 2 (TRS2006) - 0 views

  • Proteus Yard is a mythical goods yard serving a small industrial estate containing eight different industries. The layout uses the Trainz 1.3/UTC scripting to deliver a number of random trains of wagons which must be sorted and delivered to the various factories on the estate.
steve t

LAYOUT DESIGN FOR OPERATION - 0 views

  • THE INTERCHANGE Once you have loaded or emptied a car at one of the industries on your layout, where will the car go? It goes either: to another industry on your layout, or off your layout altogether. The latter requires hidden layover tracks, a hidden fiddle yard, and/or hidden interchange tracks. My "waybills" send empty cars to the interchange, and usually send loaded cars to the interchange. The interchange is switched "at night". The yard engine pulls from the yard the cars for the interchange, parks them, pulls the cars from the interchange tracks to the yard, and runs the parked cars to the interchange. Once the cars are in the hidden, off-layout track(s), the waybills are updated. All this adds operation and adds purpose to moving the cars around. SUMMARY
1 - 20 of 34 Next ›
Showing 20 items per page