The buzzword these days is sustainability. A few years ago, this meant responsibility in a broader sense. Now, the focus is more on actual products. So, which alternatives can the industry offer to the appliance industry’s well-known products? And are these actually large, revolutionary steps?
In white-good appliances, there are several alternatives. Europeans switched to high-efficiency horizontal-drum washers a long time ago—a revolutionary technology that left little room for improvement. The next big step might be to heat the water with gas instead of electricity.
Martin Elektrotechnik is one German company that offers an automatic external water selector. It detects activation of the heating element and switches accordingly. However, at 285 euros, sales have been limited. The same unit can also be used for the dishwasher.
The clothes dryer is another story. These appliances use 3–4 kWh per run, and there are more-efficient alternatives—the gas dryer and the heat pump dryer. Europe has a few gas dryer manufacturers, including UK-based Crosslee with its White Knight brand and Miele. Despite the advantages of efficiency and shorter drying time, they have not caught on in the larger marketplace. They only come as vented units, not as condenser units, and connecting the gas is just too much of a hurdle for many consumers, even when there is a click-on gas connector system available.
Heat pump dryers are relatively new. Electrolux started in 1997 with an almost hand-built model under their premium, environmentally oriented AEG brand. At a price point of 1500 euros, even wealthy German consumers would not buy many of them. In 2005, the company started selling a redesigned model, called Öko-Lavatherm. It claimed energy savings up to 40% for around 700 euros, which is more in line with the cost of other premium models.
Other manufacturers of heat pump dryers include Blomberg, the German brand owned by Turkish market leader Arçelik, and Swiss Schulthess.
In cooling, there have been no large breakthroughs. Years ago, there was talk of vacuum-insulated panels, but no models were produced. Instead, there have been a number of smaller-scale efficiency improvements, and today, the industry suggests that consumers simply buy new, extraefficient models. AEG offers a typical case: a 300-L cooler/freezer in the A++ efficiency class now uses only 200 kWh per year, whereas a 10-year-old model used as much as 500 kWh.
And what about the heating industry? Remember that in chilly Europe, heating is the largest energy user. The advice here is almost the same as for white-good appliances—just replace old equipment. There are still many noncondenser boilers on the market and a significant percentage of houses are insufficiently insulated.
German Vaillant is calling its efficiency initiative "Generation Efficiency." But, like the home appliances market, progress is gradual. Current boilers are already highly efficient. Other technologies, such as solar panels, combined heat-and-power units, and heat pumps, catch on more slowly. Still, there were 1.1 million renewable energy units sold in Europe in 2006 compared with 440,000 just two years earlier.
Some of the company’s smaller steps forward were seen at ISH. The small Vaillant ecoCOMPACT combiboiler now has a high-efficiency pump, which is said to reduce electricity use by 50%. Hot water output is higher for user comfort, and there are new modules for remote access for better preventive service. The main obstacle for customers wanting a heat pump is the installation, as sometimes complex drilling is needed. Vaillant solved that issue by taking over a drilling company and offers all of the services for a fixed price, just like its competitor, BBT Thermotechnik.
Across the board, it seems manufacturers continue their efforts toward sustainability. The question now seems to be whether or not consumers will take advantage of the technology.
Colin Bennett on 31 Mar 09By Jorge Moreno, Environmental and Building Technologies, Frost & Sullivan With more end users focusing on reducing energy costs, energy-saving water-to-water heat pump (WTWHP) chillers are being deployed to reduce a facility's utility bills. A WTWHP chiller is a water-cooled chiller that is designed to produce hot water at a specified temperature. The use of a WTWHP chiller is very similar to a conventional centrifugal chiller except for the fact that it uses two compressors, slightly different piping configurations, and more advanced controls in order to balance cooling and heating loads. In a conventional chiller, cold water is produced for comfort cooling, and the hot water that is extracted from the refrigeration process goes into a cooling tower and is released into the atmosphere. In a WTWHP chiller, this hot water is captured and relocated to a second heating stage, where the temperature is raised and the water is used as a heating source for a building's heating requirements. The key strength of WTWHP chillers is the high coefficient of performance (COP) that translates into significant energy savings and a shorter payback period. On the other hand, the key weakness is that it can only provide such benefits in a narrow range of applications primarily due to its coincident need for cooling and heating requirements throughout the year to ensure efficiency. A coincident need means that the application demands sizable water heating load along with the typical high cooling requirements in summer, and a sizable chilled water load along with the typical heating requirements during winter. Cooling output is directly dependent on the demand for heating, and vice versa. Consequently, in the absence of sufficient heating requirements, there is only a limited amount of cooling that can be produced. Any excess heating or cooling cannot be stored and hence, it is critical to align the cooling with the expected heating requirements. Coincidentally, in the absence of suf
