Group items tagged

A shielded transformer is a two-winding transformer, usually delta"star connected and serves the following purposes: Voltage transformation from the distribution voltage to the equipment's utilization voltage. Converting a 3-wire input power to a 4-wire output thereby deriving a separate stable neutral for the power supply wiring going to sensitive equipment. Keeping third and its multiple harmonics away from sensitive equipment by allowing their free circulation in the delta winding. Softening of high-frequency noise from the input side by the natural inductance

The MAX13171E along with the MAX13173E/ MAX13175E, form a complete pin-selectable data terminal equipment (DTE) or data communication equipment (DCE) interface port that support the V.28 (RS-232), V.10/V.11 (RS-449/V.36, RS-530, RS-530A, X.21), and V.35 protocols. The MAX13171E transceivers carry the high-speed clock and data signals, while the MAX13173E transceivers carry the control signals. The MAX13171E can be terminated by the MAX13175E pin-selectable resistor termination network. The MAX13175E contains six pin-selectable, multiprotocol cable termination networks.

When Pantelis Georgiou and his fellow biomedical engineers at Imperial College London decided to design an intelligent insulin pump for diabetes patients, they started at the source. "We asked ourselves, what does a pancreas do to control blood glucose?" Georgiou recalls. The answer is pretty well known: The organ relies primarily on two populations of cells—beta cells, to secrete insulin when blood glucose is high, and alpha cells, which release a hormone called glucagon when glucose levels are low. "We simulated them both in microchip form," Georgiou says. This biomimetic approach diverges from today's dominant method of delivering only insulin using a relatively simple control system.

In high-end audio equipment, careful selection of resistors is one of the best ways to avoid or minimize noise and distortion in the signal path. This paper describes the noise generation in resistors manufactured using the various available resistor technologies and quantifies the noise insertion typical for each type.

The marriage of high performance optics with microfluidics could prove the perfect match for making lab-on-a-chip technologies more practical. Microfluidics, the ability to manipulate tiny volumes of liquid, is at the heart of many lab-on-a-chip devices. Such platforms can automatically mix and filter chemicals, making them ideal for disease detection and environmental sensing. The performance of these devices, however, is typically inferior to larger scale laboratory equipment. While lab-on-a-chip systems can deliver and manipulate millions of liquid drops, there is not an equally scalable and efficient way to detect the activity, such as biological reactions, within the drops.

Not so long ago, artists routinely made their own paints using all sorts of odd ingredients: clay, linseed oil, ground-up insects—whatever worked. It was a crude and rather ad hoc process, but the results were used to create some of the greatest paintings in the world. Today I and other scientists are developing our own special paints. We’re not trying to compete with Vermeer or Gauguin, though. We hope to create masterpieces of a more technical nature: optoelectronic components that will make for better photovoltaic cells, imaging sensors, and optical communications equipment. And we’re not mixing and matching ingredients quite so haphazardly. Instead, we’re using our blossoming understanding of the world of nanomaterials to design the constituents of our paints at the molecular level.