Group items tagged

In this video we present four types of wall climbing robots that were developed in Dr. Amir Shapiros lab at the Department of Mechanical Engineering of Ben Gurion University of the Negev, Israel. The robots shown are: First, a magnetic climber that has compliant magnetic wheels and is capable to climb on ferromagnetic surfaces. This robot can be used for inspection of ship hull or bridges. Second, is a Snail inspired wall climbing robot capable of climbing on non metallic surfaces using hot melt glue. The robot secretes the adhesive at the front and peels off the track from the wall at the bottom leaving a trail behind just like the snail does. Third, is a robot that uses sticky wheels in order to attach itself to the wall. It simply has 3Ms sticky tape on the wheels. It can climb on smooth surfaces like glass. Fourth, is a four legged wall climbing robot for climbing on rough surfaces. It has 12 claws made of fishing hooks mounted on each footpad, and it climbs like cat or other rodents. For further information email: ashapiro@bgu.ac.il. See also: www.bgu.ac.il/~ashapiro and http://bgurobots.pbworks.com/

Tiny semiconductor dots could lead to a new type of circuit based on magnetism rather than current flow. At least that’s the hope of researchers who’ve made the dots and are hoping to build them into a workable device. ”We want to make it into a so-called nonvolatile transistor,” says Kang Wang, head of the Device Research Laboratory at the University of California, Los Angeles. Such a ”spintronic” transistor would retain its logic state in the absence of current and require less power to switch a bit, reducing the electrical power required by a computer chip by as much as 99 percent. Wang’s research, supported in part by Intel, was published in March in the online version of Nature Materials. Where electronic transistors rely on the presence or absence of current to register the ones and zeros of digital logic, spintronic transistors depend on ”spin,” a quantum characteristic of the electron. Picture the electron as a rotating globe. When the north pole is pointing upward, that’s spin up; when pointing the other way, it’s spin down. When the spins of most electrons are aligned, the material is magnetic. When their spins are random, the material isn’t. An applied current can align or randomize the spins, allowing for spin-based switches.

Analog Devices, Inc., has introduced a pair of Class-D audio amplifiers for smart phones, GPS units and other handheld electronics where premium sound quality offers a major competitive advantage. The SSM2375 and SSM2380 amplifiers provide audio system designers with the option of fixed or programmable gain settings combined with low noise and superior audio performance. The SSM2380 low-power, stereo Class-D amplifier is the first in its class to incorporate an I²C interface, which allows gain stages to be set from 1 dB to 24 dB (plus mute) in 47 distinct steps with no other external components required. The programmable interface also enables independent L/R channel shutdown, a variable low-EMI (electro-magnetic interference) emission control mode, and programmable ALC (automatic level control) functions for speaker protection. The SSM2380 achieves a 100-dB SNR (signal-to-noise ratio) and extends battery life by achieving 93 percent power efficiency at 5 V while running at 1.4 W into an 8-ohm speaker.