Group items matching

in title, tags, annotations or url

The race to create tiny wireless sensors that could monitor anything from pressure in the eyes and brain to the stability of bridges appears to be heating up. Earlier this month, IEEE Spectrum reported on two approaches to creating an almost-indefinitely-running sensor using piezoelectric systems to convert tiny vibrations into power. Now, another team from the University of Michigan has created an alternative approach that uses solar power to keep the sensor running autonomously for many years.

Google PowerMeter allows consumers to access their Power consumption data through a secure, Web-based iGoogle™ gadget. As a Strategic Partner, Microchip incorporated the recently announced Google PowerMeter API to create a Reference Implementation, which makes it much easier to develop products that are compatible with Google PowerMeter. Microchip's Reference Implementation demonstrates the device's activation, data transmission and status messages using readily available Microchip development tools. It can be used as a template for developers' own designs.

LED luminaires require precise power and heat management because LEDs convert most of the electrical energy they receive into heat rather than light. Without adequate thermal management, this heat can degrade the LED's life span and affect color output. Also, LEDs can fail short because they are silicon devices, so they may require fail-safe backup in the form of overcurrent protection. Resettable PPTC (polymeric-positive-temperature-coefficient) circuit-protection devices have demonstrated their effectiveness in a variety of LED-lighting applications. Like traditional fuses, they limit current after they exceed specified limits. However, unlike fuses, PPTC devices can reset after the fault clears and the power cycles.

Analog Devices, Inc., has introduced a pair of Class-D audio amplifiers for smart phones, GPS units and other handheld electronics where premium sound quality offers a major competitive advantage. The SSM2375 and SSM2380 amplifiers provide audio system designers with the option of fixed or programmable gain settings combined with low noise and superior audio performance. The SSM2380 low-power, stereo Class-D amplifier is the first in its class to incorporate an I²C interface, which allows gain stages to be set from 1 dB to 24 dB (plus mute) in 47 distinct steps with no other external components required. The programmable interface also enables independent L/R channel shutdown, a variable low-EMI (electro-magnetic interference) emission control mode, and programmable ALC (automatic level control) functions for speaker protection. The SSM2380 achieves a 100-dB SNR (signal-to-noise ratio) and extends battery life by achieving 93 percent power efficiency at 5 V while running at 1.4 W into an 8-ohm speaker.

Tiny semiconductor dots could lead to a new type of circuit based on magnetism rather than current flow. At least that’s the hope of researchers who’ve made the dots and are hoping to build them into a workable device. ”We want to make it into a so-called nonvolatile transistor,” says Kang Wang, head of the Device Research Laboratory at the University of California, Los Angeles. Such a ”spintronic” transistor would retain its logic state in the absence of current and require less power to switch a bit, reducing the electrical power required by a computer chip by as much as 99 percent. Wang’s research, supported in part by Intel, was published in March in the online version of Nature Materials. Where electronic transistors rely on the presence or absence of current to register the ones and zeros of digital logic, spintronic transistors depend on ”spin,” a quantum characteristic of the electron. Picture the electron as a rotating globe. When the north pole is pointing upward, that’s spin up; when pointing the other way, it’s spin down. When the spins of most electrons are aligned, the material is magnetic. When their spins are random, the material isn’t. An applied current can align or randomize the spins, allowing for spin-based switches.

With the introduction of the WEBENCH Online Design Environment in 1999, National Semiconductor made it possible for design engineers to create a reliable power supply circuit over the internet in minutes. The user specified the circuit performance and the WEBENCH Toolset delivered. Today, WEBENCH Designer creates and presents all of the possible power, lighting, or sensing circuits that meet a design requirement in seconds. This enables the user to make value based comparisons at a system and supply chain level before a design is committed. This expert analysis is not possible anywhere else.

Intel unveiled plans Monday to take supercomputing performance to levels that are orders of magnitude greater than currently possible by the end of the decade. Coincidentally, the news broke just after Japan's K supercomputer had been named the world's fastest, with over three times the processing power as the previous title holder, China's Tianhe-1A system. The power of supercomputers shows no signs of abating. Intel said its new Many Integrated Core (MIC) architecture will deliver exaflop-scale supercomputing by 2018, with the fastest supercomputers reaching up to 4 exaflops of performance by 2020.

The e-reader market took the company E-Ink and its low-power, easy-on-the-eyes digital paper technology mainstream. But no one says E-Ink is perfect; the displays, to date, don’t do flexibility or full color well. And they aren’t cheap enough to move into budget-conscious applications, like the long-dreamed of grocery store shelf tags that could be updated remotely to display new prices. E-Ink and its brethren continue to advance down their technology development paths. But a startup company based in Saratoga, Calif., says they’re heading in the wrong direction.

Humans have been coming up with innovative ways with which to plunder the Earth and its resources for as long as we have existed, so perhaps its time we give back a little. Leading aquatic animals, such as fish, away from underwater power plant turbines seems like a good place to begin, and a researcher at the Polytechnic Institute of New York University has designed a robot that will help just with that. Assistant professor Maurizio Porfiri studied the characteristics of small schools of fish to learn what exactly they look for in a leader, and he designed a palm-sized robot that possesses these traits. By taking command, this leader can be programmed to guide the fish away from danger, but the tricky part is getting the animals to accept the robot as one of their own.

A new network design that avoids the need to convert optical signals into electrical ones could boost capacity while reducing power consumption.

Recent advances in the size and performance of FPGAs, coupled with advantages in time-to-market, field-reconfigurability and lower up-front costs, make FPGAs ideally suited to a wide range of commercial and defense applications [6]. In addition, FPGAs generality and reconfigurability provide important protections against the introduction of Trojan horses during semiconductor manufacturing process[8]. As a result, FPGA applications increasingly involve highly-sensitive intellectual property and trade-secrets, as well as cryptographic keys and algorithms [7].

Lattice Diamond design software offers leading-edge design and implementation tools optimized for cost sensitive, low-power Lattice FPGA architectures. Diamond is the next generation replacement for ispLEVER featuring design exploration, ease of use, improved design flow, and numerous other enhancements. The combination of new and enhanced features allows users to complete designs faster, easier, and with better results than ever before.

In traditional short-haul microwave transmission (that is, line-of-sight microwave transmissions operating in the 18 GHz and 23 GHz radio bands),RF design engineers typically are concerned with signal aspects such as fade margins, signal reflections, multipath signals, and so forth. Like an accountant seeking to balance a financial spreadsheet, an RF design engineer normally creates an RF budget table, expressed in decibels (dB), in order to establish a wireless design. Aspects like transmit power and antenna gain are registered in the assets (or plus) column, and free space attenuation, antenna alignment, and atmospheric losses are noted in the liabilities (or minus) column. The goal is to achieve a positive net signal strength adequate to support the wireless path(s) called for in the design.

Rube Goldberg couldn’t have designed a more elegant confluence of convoluted causal relationships.  Start analyzing the perplexing paradox of the FPGA synthesis market and each link of the chain reveals a bizarre force vector that eventually doubles back onto itself into an unlikely equilibrium that miraculously has held stable for a full decade despite disruptive forces of epic proportions. For over a decade now, Synplify has navigated these waters and has continued to survive and thrive through the unlikeliest of conditions.  Now in the hands of EDA giant Synopsys, the Synplify family of FPGA synthesis tools continues to evolve - with a major upgrade this fall.  When you put a digital design into an FPGA, there are two technologies that determine whether your design fits or doesn’t fit, whether it meets your timing constraints or does not, whether the power consumption will be within your limits (or those of the FPGA), or whether it fails completely, leaving your project at the mercy of major mulligans.   Those two technologies are synthesis and place-and-route. 

Japan’s Explay Ltd recently announced that it has begun to ship its pico projector engines to developers around the world. The Explay Projector Engine is only 6.7 cubic centimeters in size and just 7mm thick (~1/4 of an inch). Despites its tiny dimensions, the pico projector generates 14 lumens laser light on just 1.3 Watts of power (1.8 with control circuits) and can produce images 7 to 70 inches in size. Resolution is a respectable 852×480 and with a laser based system it should stay in sharp focus over a wide range (20 to 200cm). While Explay has yet to announce which manufacturers will be using their projector they did say that they expect it to appear in devices as early as February of 2011. Looks like we’ll need to watch for it at CES. Explay plans on improving their projector engine further. They hope that the end of 2011 will see the arrival of a 25 lumens WXGA 1366×768 version. A member of the R&D team in Israel (part of XDM Ltd) shows off the 14 lumens pico projector in a prototype testing rig in the video below. Not a bad image for the world’s smallest laser projector.

The MATLAB team at MathWorks tested performance scaling of the backslash ("\") matrix division operator to solve for x in the equation A*x = b. In their testing, matrix A occupies far more memory (290 GB) than is available in a single high-end desktop machine—typically a quad core processor with 4-8 GB of RAM, supplying approximately 20 Gigaflops. Therefore, they spread the calculation across machines. In order to solve linear systems of equations they need to be able to access all of the elements of the array even when the array is spread across multiple machines. This problem requires significant amounts of network communication, memory access, and CPU power. They scaled up to a cluster in EC2, giving them the ability to work with larger arrays and to perform calculations at up to 1.3 Teraflops, a 60X improvement. They were able to do this without making any changes to the application code. Here's a graph showing the near-linear scalability of an EC2 cluster across a range of matrix sizes with corresponding increases in cluster size for MATLAB's parallel backslash operator:

IBM's light-powered links overcome the greatest speed bump in supercomputing: interconnect bandwidth

South Korean researchers have recently made a flexible nonvolatile memory based on memristors—fundamental electronic circuit elements discovered in 2008—using thin graphene oxide films. Memristors promise a new type of dense, cheap, and low-power memory and have typically been made using metal oxide thin films. The new graphene oxide devices should be cheaper and simpler to fabricate—they could be printed on rolls of plastic sheets and used in plastic RFID tags or in the wearable electronics of the future. "We think graphene oxide can be a good candidate for next-generation memory," says Sung-Yool Choi, who leads flexible devices research at the Electronics and Telecommunications Research Institute in Daejeon, South Korea. Choi and his colleagues reported their device last week in Nano Letters.

ZMD AG has launched the second wave of the company's ZLED family of LED control solutions with two new low-voltage ICs designed for battery-powered handheld devices. The ZLED7012 and ZLED7022 incorporate low-noise, constant-frequency charge pump DC/DC converters that can efficiently drive up to four (ZLED7012) or six (ZLED7022) strings of LEDs.

In many instances, the way embedded software is structured and how it interacts with the hardware in a system can have a profound effect on the transient immunity performance of a system. It can be impractical and costly to completely eliminate transients at the hardware level, so the system and software designers should plan for the occasional erroneous signal or power glitch that could cause the software to perform erratically. Erratic actions on the part of the software can be classified into two different categories: