Group items tagged

Power and energy are key design considerations across a spectrum of computing solutions, from supercomputers and data centers to handheld phones and other mobile computers. A large body of work focuses on managing power and improving energy efficiency. While prior work is easily summarized in two words—"Avoid waste!"—the challenge is figuring out where and why waste happens and determining how to avoid it. In this article, I discuss how, at a general level, many inefficiencies, or waste, stem from the inherent way system architects address the complex trade-offs in the system-design process. I discuss common design practices that lead to power inefficiencies in typical systems and provide an intuitive categorization of high-level approaches to addressing them. The goal is to provide practitioners—whether in systems, packaging, algorithms, user interfaces, or databases—a set of tools, or "recipes," to systematically reason about and optimize power in their respective domains.

bowl and pairing off to come up with a way to create and commercialise sensors and switches that generate their own power. The idea is that the parts will make external power sources redundant - because they can convert energy from body heat, light and vibrations straight into electricity. Self powered electronics have already sporadically been used in technology like wall-mount remote control units for air conditioners, says Nikkei, but existing parts are bulky and cost a couple thousand yen a piece. 3,000 yen is about $35 - which means they're not the best bet, financially, yet.

Cypress Semiconductor Corp. has launched a programmable product for data communication over existing power lines. The Powerline Communication product leverages the programmable analog and digital resources of Cypress's PSoC programmable system-on-a-chip architecture. It integrates multiple functions beyond communication, such as power measurement, system management and LCD drive. In addition to its flexibility and integration, the product offers greater than 97% packet success rates without retries and 100% success rates with retries built into the solution's coding, according to Cypress. It also offers the flexibility to communicate over high-voltage and low-voltage power lines for lighting and industrial control, home automation, automatic meter reading and smart energy management applications.

Using a programmable device to expand the capabilities of an embedded system, designers can reduce power consumption at the same time By Rahul V. Shah and Vishesh Agrawal

The consumer handheld market is growing by leaps and bounds. With more processing power and increased support for more applications, portable products are cross-pollinating with traditional computing systems even as the product life cycle has decreased considerably in this market segment. As a result, especially in this era of economic slowdown, it is imperative that new products meet the time-to-market window to gain maximum acceptance. A decrease in product life cycles requires a reduced development cycle and an increased emphasis on reusability and reprogrammability. The emerging handheld market is also seeing interesting trends in which each individual device in a family has lower volumes but there is more customization across the series of devices, effectively upping the total unit volumes. The key challenge then becomes how to develop a system that is widely reusable and also customizable. These requirements have led designers increasingly to turn to the FPGA for handheld-product development. The FPGA has become more powerful and feature-rich, while gate counts, area and frequency have increased. FPGA development and turnaround cycles are considerably shorter than those of custom ASICs, and the added advantage of reprogrammability can make the FPGA a more compelling solution for handheld embedded systems.

A new form of propulsion that could allow microrobots to explore human bodies has been discovered. The technique would be used to power robots and other devices such as microfluidic pumps from a distance. Finding a propulsion mechanism that works on the microscopic scale is one of the key challenges for developing microrobots. Another is to find a way to supply such a device with energy because there is so little room to carry on-board fuel or batteries. Now a team lead by Orlin Velev at North Carolina State University in Raleigh, US, has found that a simple electronic diode could overcome both these problems. Velev and Vesselin Paunov from the University of Hull, UK, floated a diode in a tank of salt water and zapped the set-up with an alternating electric field.

A new form of propulsion that could allow microrobots to explore human bodies has been discovered. The technique would be used to power robots and other devices such as microfluidic pumps from a distance. Finding a propulsion mechanism that works on the microscopic scale is one of the key challenges for developing microrobots. Another is to find a way to supply such a device with energy because there is so little room to carry on-board fuel or batteries. Now a team lead by Orlin Velev at North Carolina State University in Raleigh, US, has found that a simple electronic diode could overcome both these problems. Velev and Vesselin Paunov from the University of Hull, UK, floated a diode in a tank of salt water and zapped the set-up with an alternating electric field.

Clearly the most attractive super hero power for nanotechnology at the moment is invisibility. Last month we had a nano-enabled coating that managed to make aircraft invisible to radar. Now we have a metamaterial consisting of fishnet-like film containing holes about 100 nanometers in diameter that could serve as an invisibility cloak. While I personally might be persuaded to choose Spider-like climbing abilities for my nano-enabled super hero power, invisibility does pose an attractive option. However, invisibility is far from the point of this research conducted at the Birck Nanotechnology Center, Purdue University and appears in the August 5th edition of the journal Nature.

Opus is Octasic's high-performing, ultra low-power, asynchronous DSP technology optimized for basestations, video processing and media gateway solutions. Asynchronous designs deliver similar computing performance to synchronous designs, but use less silicon and less power. No clock tree No state-elements Less sensitive to process and temperature variations

Predicting trends is difficult even by the most connected industry experts, but one trend that's easy to spot is the widespread acceptance of multicore SoC. This is happening for a number of reasons. First, it's been years since the workstation first adopted the multicore processor architecture to solve such issues as increasing performance and power concerns. While the adoption rate in workstations is now saturated and is fully supported by General Purpose OSs (GPOS), the embedded world is just now looking at ways to adopt multicore architecture. Second, several SoC vendors have been providing multicore solutions including Cavium, Freescale, MIPS, and ARM; but up until now, these solutions have been limited to networking and used for performance enhancements rather than for low power. The rest of the embedded industry has had limited hardware options available as low-power design is a driving factor. While the ARM 11 MPCore was ahead of its time, the Cortex-A9 MPCore design is ready for primetime and is gaining acceptance in the embedded marketplace. As a result, SoC vendors have adopted the Cortex-A9 MPCore hardware as a basis for their next generation designs. Over a year ago, Texas Instruments pre-announced their next-generation OMAP designs in the OMAP 4 with a dual-core Cortex-A9 MPCore, scheduled for production in the second-half of 2010. ST Microsystems has pre-announced their next generation consumer devices which will be based on the Cortex A9 MPCore.

How's this for a wedge issue on a slow news week? When Xilinx announced earlier this year that it was changing one of its foundry suppliers from UMC to TSMC for the 28-nm node, it seemed like a blow to differentiation—at least from a process technology standpoint—between Xilinx and Altera, which has been using TSMC for years. But while Xilinx chose to go with TSMC's high-performance/low power process, Altera said this week it is going with TSMC's high-performance process. Altera maintains that customers in the high end communications equipment market are much more concerned about performance than power. Luanne Schirrmeister, senior director of product marketing at Altera, put it this way: "In communications infrastructure, nothing is battery powered. Everything is plugged into a wall."

Given the maturity of MOSFETs, selecting one for your next design may seem deceptively simple. Engineers are familiar with the figures of merit on a MOSFET data sheet. Selecting a MOSFET requires the engineer to use their expertise in scrutinizing different specifications for individual applications. In an application such as a load switch in a server power supply, the switching aspects of a MOSFET matter little because the MOSFET is on almost 100% of the time. The on resistance (RDS(ON)) may be the key figure of merit in such an application. Still other applications, including switching power supplies, use MOSFETs as active switches, and cause the engineer to value other MOSFET performance parameters. Let us consider some applications and their prioritization of MOSFET specifications.

A shielded transformer is a two-winding transformer, usually delta"star connected and serves the following purposes: Voltage transformation from the distribution voltage to the equipment's utilization voltage. Converting a 3-wire input power to a 4-wire output thereby deriving a separate stable neutral for the power supply wiring going to sensitive equipment. Keeping third and its multiple harmonics away from sensitive equipment by allowing their free circulation in the delta winding. Softening of high-frequency noise from the input side by the natural inductance

Events such as natural disasters, military actions, and public safety threats have led to an increased need for robust robots — especially ones that can travel across complex terrain in any dimension. The ability to scale vertical building surfaces or other structures offers unique capabilities in military applications such as urban reconnaissance, sensor deployment, and setting up urban network nodes. SRI's novel clamping technology, called compliant electroadhesion, has enabled the first application of this technology to wall-climbing robots that can help with these situations.  As the name implies, electroadhesion is an electrically controllable adhesion technology. It involves inducing electrostatic charges on a wall substrate using a power supply connected to compliant pads situated on the moving robot. SRI has demonstrated robust clamping to common building materials including glass, wood, metal, concrete, etc. with clamping pressures in the range of 0.5 to 1.5 N per square cm of clamp (0.8 to 2.3 pounds per square inch). The technology works on conductive and non-conductive substrates, smooth or rough materials, and through dust and debris. Unlike conventional adhesives or dry adhesives, the electroadhesion can be modulated or turned off for mobility or cleaning. The technology uses a very small amount of power (on the order of 20 microwatts/Newton weight held) and shows the ability to repeatably clamp to wall substrates that are heavily covered in dust or other debris.

The ARM Cortex™-M4 processor is the latest embedded processor by ARM specifically developed to address digital signal control markets that demand an efficient, easy-to-use blend of control and signal processing capabilities. The combination of high-efficiency signal processing functionality with the low-power, low cost and ease-of-use benefits of the Cortex-M family of processors is designed to satisfy the emerging category of flexible solutions specifically targeting the motor control, automotive, power management, embedded audio and industrial automation markets. The Cortex-M4 processor features extended single-cycle multiply-accumulate (MAC) instructions, optimized SIMD arithmetic, saturating arithmetic instructions and an optional single precision Floating Point Unit (FPU). These features build upon the innovative technology that characterizes the ARM Cortex-M series processors…

The MiniZeni series from Sharp radiates high efficiency, deliver high color rendering index (CRI) values of up to 87 and boast a long service life whilst measuring only 15x12x1.6mm. The six new models of the MiniZeni series are characterised by four special features: they have compact outer dimensions and are extremely flat, economical and bright.

Ice Energy has a novel solution for the electricity challenges of the 21st century: Make Popsicles. Put another way, the company wants to freeze water at night in refrigerator-like boxes adjacent to commercial air conditioners and then thaw it during the day, when power demand is highest. This would theoretically allow AC-hungry commercial buildings in warm climates to cut energy use during heat waves, by shutting air conditioners down while still providing cool air to buildings from melting ice. After seven years of development and testing, the Windsor, Colo.-based company signed an agreement recently with the Southern California Public Power Authority here to deploy some 6,000 Popsicle-making units at 1,500 locations in the utility's service territory around Los Angeles. Ice Energy says the units, called Ice Bears, will lead to a 30 percent fuel reduction for the utility through avoided use of so-called peaker generation plants, which are only turned on when demand is highest.

The IEEE has launched a new Web site that consolidates information about smart electric grids from it various societies. The portal is one of many activities from an IEEE smart grid initiative coordinating the organization's work on the transition to digital, networked power systems and services. The smart grid is "so interdisciplinary," said Wanda Reder, chair of the IEEE Smart Grid Task Force and former president of the IEEE Power & Energy Society. "We have the gamut covered in technical interests, but we needed a way to facilitate communications between our many entities to link information on all the conferences, papers and standards we have in this area," she added.

The main goal of this article is to focus on the difficulties encountered by SoC integrators when selecting an embedded microcontroller (MCU). Indeed, the selection is based on MCU performances, but the comparison can be difficult and compromised when considering all the parameters influencing these performances.In this article, we will detail how to assess rigorously power consumption, area, speed, code density and processing power for an embedded MCU. For each performance, we will describe how the parameters have to be selected to enable a fair comparison between processor cores.