Group items tagged

The current through a photodiode is directly proportional to the light intensity

The photodiode and phototransistor can be both photovoltaic (generators of potential difference) and photoconductive (modifiers of an electric current), depending on the application.

A reverse-biased photodiode operates in what is called photoconductive mode, since the conduction of the semiconductor junction varies with the illuminating light intensity.  If the reverse-biased voltage is relatively large (i.e. several volts) the reverse-biased photodiode will have a very fast response time (much faster than an LDR) and is suitable for detecting light signals that vary down to a time scale of a fraction of a microsecond.

It is powered with two 3.3F Goldcaps. They can be charged in a few seconds. When they are charged, MAXIBUg gets "afraid" of light, and wanders of to go to play "in the dark". After a while, about 20 seconds (depending on the current used by the two motors ), the power has dropped, and it wants to "eat". It gets light attracted, and will turn and go to the light. When it gets there, it will recharge and still will be atrackted to the light until it reaches a trigger voltage , at which it gets "afraid"of the light again. This will go on all day until someone turns off the lightsource. While doing all this it also will backup when bumping into something.

Because of the "on-off" output of the first schmitt trigger, the inputs for the LDRs will switch. That's why it gets light atracted -light afraid. This also means that you cannot use IR diodes (like SHF205). You have to use LDRs !

Reverse bias induces only little current (known as saturation or back current) along its direction. But a more important effect of reverse bias is widening of the depletion layer (therefore expanding the reaction volume) and strengthening the photocurrent. Circuits based on this effect are more sensitive to light than ones based on the photovoltaic effect and also tend to have lower capacitance, which improves the speed of their time response. On the other hand, the photovoltaic mode tends to exhibit less electronic noise.

Photodiodes can be used under either zero bias (photovoltaic mode) or reverse bias (photoconductive mode)