Group items tagged

ON Semiconductor has expanded its multiplexer product line with devices that are designed to function at high input rates/clock frequencies. The NB6VQ572M, NB6LQ572, NB7L572, NB6L572M, NB7LQ572, NB6LQ572M, NB7VQ58M and NB7V58M mux/fanout devices are targeted at SONET, Gigabit Ethernet, Fiber Channel, backplane and other clock/data distribution applications. The NB6VQ572M and NB6LQ572M differential 4:1 clock/data input multiplexers with 1:2 current mode logic (CML) clock/data fanout buffers operate at up to 6 GHz/8 Gbps from a 1.8 V, 2.5 V or 3.3 V power supply. The new devices have a data dependent jitter of <10 ps and random clock jitter of less than 0.8 ps RMS.

The embedded world is constantly changing. You might not have noticed, but if you take a minute to recall what a microcontroller system was like 10 years ago and compare it to today's latest microcontroller systems, you will find that PCB design, component packages, level of integration, clock speed, and memory size have all going through several generations of change. One of the hottest topics in this area is when will the last of remaining 8-bit microcontroller users start to move away from legacy architectures and move to modern 32-bit processor architectures like the ARM Cortex-M based microcontroller family. Over the last few years there has been a strong momentum of embedded developers starting the migration to 32-bit microcontrollers and, in this multi-part article, we will take a look at some of the factors accelerating this migration.

When Pantelis Georgiou and his fellow biomedical engineers at Imperial College London decided to design an intelligent insulin pump for diabetes patients, they started at the source. "We asked ourselves, what does a pancreas do to control blood glucose?" Georgiou recalls. The answer is pretty well known: The organ relies primarily on two populations of cells—beta cells, to secrete insulin when blood glucose is high, and alpha cells, which release a hormone called glucagon when glucose levels are low. "We simulated them both in microchip form," Georgiou says. This biomimetic approach diverges from today's dominant method of delivering only insulin using a relatively simple control system.

Recent advances in the size and performance of FPGAs, coupled with advantages in time-to-market, field-reconfigurability and lower up-front costs, make FPGAs ideally suited to a wide range of commercial and defense applications [6]. In addition, FPGAs generality and reconfigurability provide important protections against the introduction of Trojan horses during semiconductor manufacturing process[8]. As a result, FPGA applications increasingly involve highly-sensitive intellectual property and trade-secrets, as well as cryptographic keys and algorithms [7].

Events such as natural disasters, military actions, and public safety threats have led to an increased need for robust robots — especially ones that can travel across complex terrain in any dimension. The ability to scale vertical building surfaces or other structures offers unique capabilities in military applications such as urban reconnaissance, sensor deployment, and setting up urban network nodes. SRI's novel clamping technology, called compliant electroadhesion, has enabled the first application of this technology to wall-climbing robots that can help with these situations.  As the name implies, electroadhesion is an electrically controllable adhesion technology. It involves inducing electrostatic charges on a wall substrate using a power supply connected to compliant pads situated on the moving robot. SRI has demonstrated robust clamping to common building materials including glass, wood, metal, concrete, etc. with clamping pressures in the range of 0.5 to 1.5 N per square cm of clamp (0.8 to 2.3 pounds per square inch). The technology works on conductive and non-conductive substrates, smooth or rough materials, and through dust and debris. Unlike conventional adhesives or dry adhesives, the electroadhesion can be modulated or turned off for mobility or cleaning. The technology uses a very small amount of power (on the order of 20 microwatts/Newton weight held) and shows the ability to repeatably clamp to wall substrates that are heavily covered in dust or other debris.

Icosatetraped does, in fact, mean “twenty-four legged.” I’m not sure how to inject “soft” into that word (icostatetrasquishaped?), but this robot does have 24 soft legs. Or rather, 8 legs are soft (and moving) at any one time, while the other 16 are pressurized to carry the weight of the bot. It can move at about 1 meter per minute, which isn’t especially fast, but who cares, look at all of those little legs go! Made from plastic medical tubing, particle board, a bunch of solenoids, a Mac Mini, and some 24 volt rotary vane compressors salvaged from Gulf War nerve gas detecting equipment, this is about as DIY as it gets, and it’s awesome.

While the new multicore system on chip (SoC) signal-processing architecture announced by Texas Instruments this week at Mobile World Congress hits all the right notes with respect to what's needed in next-generation basestation designs, it rings a bit hollow given how sketchy the architectural details remain when contrasted with more 'real' announcements from the likes of Freescale. For sure, the requirements of next-generation basestations will push all architectures to their limits and beyond. Balancing lower power and lower cost with increasingly parallel, math-intensive processing to meet multiuser demands for high-data-rate data in 3GPP Long Term Evolution (LTE) Release 8 all-IP networks is not going to be easy, especially with the introduction of MIMO, beam forming, OFDMA and many other enhancements engineered to maximize spectral efficiency.

I remember when, a decade ago, Kevin Warwick, a professor at the University of Reading, in the U.K., implanted a radio chip in his own arm. The feat caused quite a stir. The implant allowed him to operate doors, lights, and computers without touching anything. On a second version of the project he could even control an electric wheelchair and produce artificial sensations in his brain using the implanted chip. Warwick had become, in his own words, a cyborg. The idea of a cyborg -- a human-machine hybrid -- is common in science fiction and although the term dates back to the 1960s it still generates a lot of curiosity. I often hear people asking, When will we become cyborgs? When will humans and machines merge? Although some researchers might have specific time frames in mind, I think a better answer is: It's already happening. When we look back at the history of technology, we tend to see distinct periods -- before the PC and after the PC, before the Internet and after the Internet, and so forth -- but in reality most technological advances unfold slowly and gradually. That's particularly true with the technologies that are allowing us to modify and enhance our bodies.

Analog Devices, Inc., has introduced a pair of Class-D audio amplifiers for smart phones, GPS units and other handheld electronics where premium sound quality offers a major competitive advantage. The SSM2375 and SSM2380 amplifiers provide audio system designers with the option of fixed or programmable gain settings combined with low noise and superior audio performance. The SSM2380 low-power, stereo Class-D amplifier is the first in its class to incorporate an I²C interface, which allows gain stages to be set from 1 dB to 24 dB (plus mute) in 47 distinct steps with no other external components required. The programmable interface also enables independent L/R channel shutdown, a variable low-EMI (electro-magnetic interference) emission control mode, and programmable ALC (automatic level control) functions for speaker protection. The SSM2380 achieves a 100-dB SNR (signal-to-noise ratio) and extends battery life by achieving 93 percent power efficiency at 5 V while running at 1.4 W into an 8-ohm speaker.

STMicroelectronics has the STM8S Discovery kit for around US$7. For that little bit of money you get an 8 bit CPU with a detachable USB programming/debugging board and 32k of flash, 2k of RAM, and 1K of EEPROM. Downloadable tools include demo C compilers from a variety of third party vendors (limited to 16k, if I'm reading the literature correctly).