Aasemoon'z Cluster

Asynchronous work flows are a very powerful tool in programming. They allow your threads to do other work while you wait for results from a long running piece of work. How would you write an asynchronous work flow in C#? Logically you might consider chaining together callbacks.

Analog Devices, Inc., has introduced a pair of Class-D audio amplifiers for smart phones, GPS units and other handheld electronics where premium sound quality offers a major competitive advantage. The SSM2375 and SSM2380 amplifiers provide audio system designers with the option of fixed or programmable gain settings combined with low noise and superior audio performance. The SSM2380 low-power, stereo Class-D amplifier is the first in its class to incorporate an I²C interface, which allows gain stages to be set from 1 dB to 24 dB (plus mute) in 47 distinct steps with no other external components required. The programmable interface also enables independent L/R channel shutdown, a variable low-EMI (electro-magnetic interference) emission control mode, and programmable ALC (automatic level control) functions for speaker protection. The SSM2380 achieves a 100-dB SNR (signal-to-noise ratio) and extends battery life by achieving 93 percent power efficiency at 5 V while running at 1.4 W into an 8-ohm speaker.

This robot is named Cody, and he’s from the Georgia Tech’s Healthcare Robotics Lab. I don’t know why the robot is called Cody… It kinda seems like it should stand for something. You know, as in, C.O.D.Y. Anybody got anything? No? Okay then.

In the new study, which was funded by the U.S. Department of Energy, Hla's team examined synthesized molecules of a type of organic salt, (BETS)2-GaCl4, placed on a surface of silver. Using scanning tunneling spectroscopy, the scientists observed superconductivity in molecular chains of various lengths. For chains below 50 nanometers in length, superconductivity decreased as the chains became shorter. However, the researchers were still able to observe the phenomenon in chains as small as four pairs of molecules, or 3.5 nanometers in length.

I luuuuuuuvvvvvvvvvvvvvvvvv Satori's demos. So much that I actually check their Pouet page every month or so just to see if they have anything new, even though they hadn't released anything since 2007. They were one of the very first groups I came to know, and they're among my top 3 favourite demo groups of all time, and I have a LOT of favourites so... you get the picture. =) I was beginning to lose hope of seeing new demos from Satori since they hadn't released anything in such a long while. And that would have been such a shame. So you can imagine the depth of my WOOOOOOOOOHOOOOOOOOOWWWWWWWWWWWW when I saw their name pop up on my screen today, as I was watching the demo compo on Breakpoint TV. =) And oh wow, they SO did not disappoint! The demo is a true artistic masterpiece.

The wait is almost over!  Exactly four months after “Justice” left us hanging, Stargate Universe fans are eagerly anticipating the show’s return to Syfy Channel in the U.S. this Friday at 9 p.m. (8 Central).  But many want to know:  Why was the mid-season break so long? We asked Stargate fans via Twitter what their ideal length would be for the mid-season break, and got a variety of responses.  But we also heard straight from Syfy’s Craig Engler, Senior V.P. of Syfy Digital, who said, “No mid-season break could mean [32] weeks or more between full seasons.  Basically, every schedule choice has a trade-off. … We split seasons so there are not huge gaps between full seasons.”

March has seen two significant announcements from FPGA start-ups with innovative architectures: Tabula, with their time-domain-multiplexed architecture, and TierLogic, implementing their routing switches in a layer of thin-film transistors. Both approaches promise to significantly reduce the die size and cost of high-end FPGAs. But before these announcements broke, a relatively unnoticed paper at February's International Symposium on FPGAs described what may be the most radical technology of them all: FPGAs using electromechanical relays. No, this is not an early April Fool's joke, nor is it one of those "let's see if anyone will publish this one" academic exercises. The paper presented work by professors and students at the Stanford University departments of electrical engineering and computer science, and researchers at Altera Corp. The work was supported in part by DARPA funding.

Hiroshi Ishiguro, a roboticist at Osaka University, in Japan, has, as you might expect, built many robots. But his latest aren’t run-of-the-mill automatons. Ishiguro’s recent creations look like normal people. One is an android version of a middle-aged family man—himself.

Related to the strong demands for virtualization technology, network I/O virtualization has recently become a hot topic and is one of the key topics being discussed at the upcoming Multicore Expo @ ESC. In fact, analyst firm IDC, in a recent white paper titled "Optimizing I/O Virtualization: Preparing the Data Center for Next-Generation Applications", stated that "If I/O is not sufficient, then it could limit all the gains brought about by the virtualization process."

Today's FPGAs are doubling in capacity every 2 years and have already surpassed the 5 million equivalent ASIC gate mark. With designs of this magnitude, the need for fast flows has never been greater. At the same time, designers are seeking rapid feedback on their ASIC or FPGA designs by implementing quick prototypes or initial designs on FPGA-based boards. These prototypes or designs allow designers to start development, verification and debug of the design—in the context of system software and hardware—and also to fine tune algorithms in the design architecture. Quick and intuitive debug iterations to incorporate fixes are of great value. The ability to perform design updates that don't completely uproot all parts of the design that have already been verified is also a bonus! Whether the goal is aggressive performance or to get a working initial design or prototype on the board as quickly as possible, this paper provides information on traditional and new techniques that accelerate design and debug iterations.

LED luminaires require precise power and heat management because LEDs convert most of the electrical energy they receive into heat rather than light. Without adequate thermal management, this heat can degrade the LED's life span and affect color output. Also, LEDs can fail short because they are silicon devices, so they may require fail-safe backup in the form of overcurrent protection. Resettable PPTC (polymeric-positive-temperature-coefficient) circuit-protection devices have demonstrated their effectiveness in a variety of LED-lighting applications. Like traditional fuses, they limit current after they exceed specified limits. However, unlike fuses, PPTC devices can reset after the fault clears and the power cycles.

Researchers at the NanoRobotics Laboratory of the École Polytechnique de Montréal, in Canada, are putting swarms of bacteria to work, using them to perform micro-manipulations and even propel microrobots. Led by Professor Sylvain Martel, the researchers want to use flagellated bacteria to carry drugs into tumors, act as sensing agents for detecting pathogens, and operate micro-factories that could perform pharmacological and genetic tests. They also want to use the bacteria as micro-workers for building things. Things like a tiny step pyramid. The video below shows some 5000 bacteria moving like a swarm of little fish, working together to transport tiny epoxy bricks and assemble a pyramidal structure -- all in 15 minutes. The video was presented at IROS last year, along with a wonderfully titled paper, "A Robotic Micro-Assembly Process Inspired By the Construction of the Ancient Pyramids and Relying on Several Thousands of Flagellated Bacteria Acting as Workers."

25 March 2010—Nowadays, a phone that doesn’t know where it is or where it’s going can’t really call itself ”smart.” To orient themselves properly, smartphones require not just GPS capability but also an electronic compass, an accelerometer, and increasingly, digital gyroscopes. The point of a gyroscope is to sense any change in an object’s axis of rotation. Up until now, gyroscopes measured movement around the three axes with three sensors—one for pitch, one for yaw, and another for roll. At most, two of these sensors would be combined on a single die. The best you could do was, say, match up a 3- by 5- by 1-millimeter yaw sensor with a 4- by 5- by 1-mm sensor that would detect pitch and roll. But on 15 February, STMicroelectronics unveiled  a 4- by 4- by 1-mm gyroscope whose single sensing structure tracks all three angular motions. It’s a triumph of microelectromechanical systems (MEMS) engineering.

Walking, swallowing, respiration and many other key functions in humans and other animals are controlled by Central Pattern Generators (CPGs). In essence, CPGs are small, autonomous neural networks that produce rhythmic outputs, usually found in animal's spinal cords rather than their brains. Their relative simplicity and obvious success in biological systems has led to some success in using CPGs in robotics. However, current systems are restricted to very simple CPGs (e.g., restricted to a single walking gait). A recent breakthrough at the BCCN at the University of Göttingen, Germany has now allowed to achieve 11 basic behavioral patterns (various gaits, orienting, taxis, self-protection) from a single CPG, closing in on the 10–20 different basic behavioral patterns found in a typical cockroach. The trick: Work with a chaotic, rather than a stable periodic CPG regime. For more on CPGs, listen to the latest episode of the Robots podcast on Chaos Control, which interviews Poramate Manoonpong, one of the lead researchers in Göttingen, and Alex Pitti from the University of Tokyo who uses chaos controllers that can synchronize to the dynamics of the body they are controlling.

The other day I was critical of the UK’s nanotechnology strategy document. However, I am a great admirer of the UK scientists and engineers working in the field of nanotechnology, which makes the recent strategy document such a double disappointment. To sort of atone for my criticism, I wanted to highlight a UK-based researcher, Professor Philip Moriarty at the University of Nottingham, who first came to my attention a few years back on the pages of Richard Jones’ blog Soft Machines , when Moriarty had organized a debate on the subject of radical nanotechnology, otherwise known as molecular nanotechnology. I also recently noted his ability to secure funding for his research to test the theories of molecular manufacturing, and wondered if he can do it why aren’t more molecular manufacturing theorists doing it.