Group items tagged

NICE Car Company, one of London's two electric-vehicle distributors, entered administration yesterday.

"Light vehicle sales in Russia are expected to grow from 2015 to 2021 as the economic recovery is set to push organic growth. Global original equipment manufacturers (OEM) based in Russia are estimated to increase manufacturing localization from the current 45% level in response to the devaluation of the Russian ruble. The dynamics of local production of B-subcompact vehicles are set to continue driving demand within the segment. Over 5 interviews were conducted face-to-face and over the phone by senior consultants/industry analysts with vehicle manufacturers, OEMs, regulation authorities, and distributors in Russia."

As the company continues to expand in both established and emerging electronics manufacturing regions, the electronics group of Henkel announced a new partnership to extend its presence in South Africa, signing on PEM Technologies to represent its line of Loctite brand electronics adhesives in the growing South African region.Though it is not often considered a major electronics manufacturing locale, South Africa is, in fact, one of the fastest growing regions for certain sectors within the electronics production market. Automotive, military/aerospace and contract manufacturing are all seeing significant growth rates and Henkel anticipates that this will only continue for the foreseeable future.\n\n"Recently, we have seen major manufacturers in automotive and in military/aerospace either transfer production from Europe to South Africa or set up additional, dedicated South African production sites," comments Richard Boyle, Regional Technical Service Manager for Henkel. "And, growth in the contract manufacturing sector--particularly for telecom, IT and entertainment products--is even more rapid and represents the largest area of expansion for Henkel," Boyle continues. "Establishing a partnership with a strong regional distributor like PEM Technologies is critical to our strategy for growth in this promising region." Steve Eglinton, Managing Director of PEM, is confident the company's relationship with Henkel will only serve to further enable customers' competitiveness. "Without question, Loctite is the leading brand of adhesives for electronics manufacturing and we are very enthusiastic about \nrepresenting Henkel materials throughout South Africa," says Eglinton. "Henkel's philosophy of supporting the customer through top-notch applications expertise, technical service and materials-based productivity enhancing tools is completely in line with PEM's approach. With Henkel's leading materials technologies, we look forward to helping customer

Chinese copper tube demand is robust in Q3, primarily due to 'unexpectedly good' sales on air-conditioners and many distributors are running out of stock, according to local manufacturers. There are two main reasons for the high demand. Firstly the weather is hotter than usual this year with temperatures rising to 38 degree Celsius in many parts of China. Secondly, the demand for air-conditioners is being boosted by the government's home appliance subsidy scheme as well as local retailers' discounts on air-conditioner sales. This is going to have a positive effect on copper consumption as copper tube used in air-conditioners is mainly refined copper.

"Maxwell Technologies, Inc. (Nasdaq: MXWL), today announced that Freqcon GmbH, a German developer and distributor of renewable energy systems, has deployed an energy storage system for the Tallaght Smart Grid Testbed in Ireland that uses Maxwell ultracapacitors and lithium-ion batteries to support grid stability in both residential and industrial settings. Freqcon's Microgrid Stabilizer addresses the electricity intermittency challenges that accompany high renewable energy penetration"

Nexans, the large French wire and cable maker, announced on 7th February that its full year operating revenues, at constant non-ferrous metals prices, increased by 6% to EUR4.87B (USD6.60B). However, the company noted that acquisitions were responsible for the increased revenues and organic sales growth was roughly flat compared to 2011. Nexans reported mixed revenue growth by sector, with the group's Industrial Cables unit and the Distributors and Transformers unit showing organic sales growth, whilst the Nexans reported contraction in its Power Transmission and Utilities and Operators businesses. In the Industrial Cables unit, high double-digit growth was noted in the demand automotive wiring harnesses, with the company highlighting its strong position with German autos companies as a decisive factor. The company also noted strong growth in supplying cables to the oil industry and the aeronautical industry. Weak European growth was noted in Nexan's Automation and Capital goods business, as well as in the railways sector, with Nexans noting that they expect railway investment to pick up in China in H2 2013.

Texas-based wire manufacturer Encore Wire saw its net income fall by 65% in 2012 to US$19.8M, as reduced prices for building wire pressured margins. The spread the company earns between the sale price of wire and the cost of purchasing raw material, mostly copper, fell by 9.4% in 2012. The company's CEO said that the fourth quarter of 2012 "was another fairly steady volume quarter, considering the time of the year and the current economic and construction industry environment." Encore is more optimistic about the operating environment in 2013 and CEO Daniel Jones said most of Encore's electrical distributor customers have lean inventories so demand should be stronger.

It has been announced that General Cable Corp. acquired Delphia Produtos Eletricos Ltda., a Brazilian automotive parts manufacturer although terms of the deal have not been disclosed.. Delphia manufactures automotive ignition wire harnesses sold into the Brazilian market and reported revenues of about $20 million in 2011. General Cable had net sales of $5.9 billion in 2011. General Cable CEO Gregory Kenny said, "over the past several years, through our expansion strategy and continuous improvement culture we have enhanced our service capabilities in a wide range of transportation and industrial applications for original equipment manufacturers, suppliers and distributors. We are well positioned to further enhance the value proposition to our global customers having achieved another important milestone with the acquisition of Delphia in this significant market in South America." Delphia is located in Sao Bernardo do Campo, Sao Paulo State and will continue to operate as Delphia under the umbrella of General Cable Automotiva Brasil.

Koyo Materica, Japan's leading nonferrous metals distributor, announced plans to enter the copper slitting business this winter, which will supply the Japanese automotive sector. A slitter line has been set up by the company in Indonesia.

According to a survey conducted by the Copper & Brass Servicenter Association, a US-based trade group, US servicenter shipments of copper and brass products amounted to 22.7Mlbs (10,297t) in April, down by 7.0% m-o-m and down by 0.9% y-o-y. The m-o-m decline was largely attributed to weaker demand for 300-series brass rod and bar, as shipments declined by 9.9%, reaching 5.2Mlbs. Servicenters enjoyed a good Q1 as shipment levels rose to reach 72.7Mlbs (32,736t), up by 4.2% y-o-y, with the peak of the quarter occurring in March, just as it did in 2011. Over 50% of servicecenters surveyed believed that incoming orders will stay at the same level in June-August 2012 as they were in March-May 2012.

Olin Brass, a division of Global Brass & Copper LLC since Global's $400 million purchase of Olin Corp. in November, is looking to increase product prices in response to rapidly increasing costs and softening demand from end-user markets. The price rises are one aspect of a wider re-organisation by Global in an attempt to offset rising raw material and energy costs. According to the company these initiatives have led to productivity gains of over 10 percent, freeing up significant working capital. However Global comments, "our input costs keep going up at such a rate we simply can't be profitable despite cost savings that we've put in place. We need to receive more for our product." Olin is also being hit by depressed end-user markets. As the slowdown in residential construction activities following the sub-prime mortgage crisis continues, demand in the fabrication sector remains low. The US Department of Commerce reported a 3.3% drop in housing starts in May, with building permits for future construction declining to an annual rate of 969,000. Despite the somewhat bleak outlook the falling dollar against a basket of foreign currencies has lead some copper and brass business that was moved offshore to return to the U.S. lately. "It's not a torrent of products coming back, but whereas in 2001 through 2003 we saw an exodus of business from here to China, this has slowed if not balanced out with some things coming back" according to Olin Brass. Olin brass is a manufacturer and distributor of copper and copper-alloy sheet, strip, plate, foil, and fabricated components in headquartered in Illinois, USA.

Crane Group, an Australian non-ferrous metals and plastic products manufacturer and distributor, announced revenue for the year ended 30th June 2008 of AUD$2,352m, a year-on-year increase of 7.6%. Net profit after tax before significant items rose to AUD$63.8m, an improvement of 18.2% on last year, thanks to strong results from the firm's plastic piping and distribution arms, Pipelines and Tradelink. Crane Copper Tube, the Group's non-ferrous metals division, reported EBIT of AUD$4.0m compared with a loss of AUD$2.5m last year. Revenue was up 2% to AUD$142m as stronger export sales helped offset subdued demand from the domestic plumbing market, according to Crane Group. "The lean manufacturing programme progressively introduced at CCT over the past two years continues to provide benefits in both productivity and working capital efficiency," said the company.

As a result of weak customer demand in the aerospace and electronics/data communications markets in Q1 2009 caused by the global economic downturn, International Wire Group, Inc., a US manufacturer and marketer of wire products, announced that it is idling production at two plants in Jewett City, Connecticut and Littleton, New Hampshire. International Wire Group, Inc. manufactures wire products for other wire suppliers, distributors and OEMs manufacturers. It has 19 facilities across the US, Belgium, France and Italy.

The Copper and Brass Servicenter Association reported that shipments of brass mill products amounted to 23.1Mlbs in June 2011, up slightly from 23.0Mlbs on the previous month and down by 6.5% y-o-y. The positive signs of growth that were registered earlier in this year, which peaked during March as shipments reached 25Mlbs, subsequently dropped and levelled off in Q2. Slower growth in June compared with the same month last year is attributed to shipments of brass products falling 12.8Mlbs, down by 12% y-o-y, with the largest drops in shipments occurring within the brass sheet, rod and bar product segments.

The stock of Cobra Wire and Cable Inc. has been acquired by Electrical Group, EIS, Inc., a subsidiary of the Genuine Parts Company. Pennsylvania-based Cobra is a wire and cable distributor to the telecom, battery and uninterruptable power supply, and marine sectors. The company is expected to generate a turnover of around US$43M/y.

According to a survey conducted by the Copper and Brass Servicecenter Association, the majority of copper distributors and fabricators hold a pessimistic view of the market. 81% of surveyed service centres and 39% of surveyed suppliers believe that orders in Q4 will remain the same, with 46% and 14% of them, respectively, expecting orders to fall. Furthermore, there is widespread concern over the uncertain future of the copper market in the light of financial turmoil in the US and Europe.

The Copper and Brass Servicenter Association reported that shipments of brass mill products amounted to 20.24Mlbs in May 2011, up by 0.4% on the previous month and down 11.3% y-o-y. This comes after a 13% fall in April from 25Mlbs in March, which was the peak that service centers experienced in Q1. Industry sources attributed the flattening in shipment levels in May to a decline in general consumer activity, also indicated by the Institute for Supply Management's manufacturing index falling from 60.4 to 53.5. In addition, it was reported that US brass mills are expecting lead times to narrow or flatten during Q3. Lead times are currently two to five weeks, having previously lengthened in early Q2. Lead times tend to be longer when consumer and service center demand is weak.