Skip to main content

Home/ Document Wars/ Group items tagged da-vinci

Rss Feed Group items tagged

Gary Edwards

ongoing · Life Is Complicated - 0 views

  • Fortunately for Microsoft, the DaVinci plugin is coming, which will enable Microsoft office applications to comply with ISO 26300. We all understand the financial issues that prompted the push to make OOXML a standard (see Tim's comment above and http://lnxwalt.wordpress.com/2007/01/21/whose-finances-are-on-the-line/ for more on this) and ensure continued vendor lock-in. However, OOXML is not the answer.
  • ODF can handle everything and anything Microsoft Office can throw at it. Including the legacy billions of binary documents, years of MSOffice bound business processes, and even tricky low level reaching add-ons represented by assistive technologies.
  •  
    Yes!  It's Da Vinci time.  I wonder if W^ has downloaded ACME 376 and taken the Da Vinci conversion engine out for a test run?  Belgium and Adobe took a look, and have expressed an interest in getting their hands on the ODF 1.2 version of Da Vinci.  California and Massachusetts have yet to comment about ACME 376, but of course they are also waiting for Da Vinci.

    I'll thank W^ for his kind comments, and make sure he knows about the ACME 376 proof of concept.  If DaVinci can hit perfect conversion fidelity with those billions of binary documents using XML encoded RTF, there is no reason why Da Vinci can't do the same with ODF.  We do however need ODF 1.2 to insure that perfect interoperability with other ODF ready applications.
  • ...1 more comment...
  •  
    Yes!  It's Da Vinci time.  I wonder if W^ has downloaded ACME 376 and taken the Da Vinci conversion engine out for a test run?  Belgium and Adobe took a look, and have expressed an interest in getting their hands on the ODF 1.2 version of Da Vinci.  California and Massachusetts have yet to comment about ACME 376, but of course they are also waiting for Da Vinci.

    I'll thank W^ for his kind comments, and make sure he knows about the ACME 376 proof of concept.  If DaVinci can hit perfect conversion fidelity with those billions of binary documents using XML encoded RTF, there is no reason why Da Vinci can't do the same with ODF.  We do however need ODF 1.2 to insure that perfect interoperability with other ODF ready applications.
  •  
    Yes!  It's Da Vinci time.  I wonder if W^ has downloaded ACME 376 and taken the Da Vinci conversion engine out for a test run?  Belgium and Adobe took a look, and have expressed an interest in getting their hands on the ODF 1.2 version of Da Vinci.  California and Massachusetts have yet to comment about ACME 376, but of course they are also waiting for Da Vinci.

    I'll thank W^ for his kind comments, and make sure he knows about the ACME 376 proof of concept.  If DaVinci can hit perfect conversion fidelity with those billions of binary documents using XML encoded RTF, there is no reason why Da Vinci can't do the same with ODF.  We do however need ODF 1.2 to insure that perfect interoperability with other ODF ready applications.
  •  
    Hi guys,

    There is an interesting discussion triggered by Tim Bray's "ongoing · Life Is Complicated" blog piece.  Our good friend Mike Champion has some interesting comments defending ISO/IEC approval of MS Ecma 376 based on many arguments.  But this one seems to be the bottom line;

    <mike> "there is not an official standard for one that (in the opinion of the people who actually dug deeply into the question, and I have not) represents all the features supported in the MS Office binary formats and can be efficiently loaded and processed without major redesign of MS Office.

    ..... So, if you want a clean XML format that represents mainstream office document use cases, use ODF. If you want a usable XML foormat that handles existing Word documents with full fidelity and optimal performance in MS Office, use OOXML. If you think this fidelity/performance argument is all FUD, try it with your documents in Open Office / ODF and MS Office 2007 / OOXML and tell the world what you learn." </mike>

    Mike's not alone in this.  This seems to be the company line for Microsoft's justification that ISO/IEC should have two conflicting file formats each pomising to do the same thing, becaus eonly one of those formats can handle the bilions of binary documents conversion to XML with an acceptable fidelity. 

    This is not true, and we can prove it.  And if we're right  that you can convert the billions of binaries to ODF without loss of fidelity, then there was no "technology" argument for Microsoft not implementing ODF natively and becoming active in the OASIS ODF TC process to improve application interoperability.

    <diigo_
Gary Edwards

AlphaDog Barks Loudly: Why Can't You Guys Just Get Along and Solve MY MSOffice Problem!... - 0 views

  • First, let me say that I am a CIO in a small (20 employees but growing fast) financial services company. I am well aware of how locked-in I am getting with our MS-only shop. I am trying to see my way out of it, but this "ODF vs ODFF" is leaving me very confused and no one is working to clear the fog. I beg for all parties to really work towards some sort of defined understanding. I don't need cooperation. But, what I don't have is well-defined positions from all parties. As it is, I feel safer staying the course with MS right now, honestly. It's what I know vs the mystery of this "open cloud" and all the bellicose infighting. How's that for "in the trenches" data? I posted a comment on Andy's blog, and I will post the same comment here for your group (minor edits): I will admit to being very, very confused by all of this ODF vs ODFF posturing. I will try to put my current thoughts in short form, but it will be a muddled mess. I warned you! From what I gather, the OpenDocument Foundation (ODFF) is attempting to create more of an interop format for working against a background MS server stack (Exchange/Sharepoint). You worry that MS is further cementing their business lock-in by moving more and more companies into dependency on not only the client-side software but also the MS business stack that has finally evolved into a serious competitive set. At that level, and in your view, the "atomic unit" is the whole document. The encoded content is not of immediate concern. ODF is concerned with the actual document content, which ODFF is prepared to ignore. The "atomic unit" is the bits and parts in the document. They want to break the proprietary encodings that MS has that lock people into MSOffice. The stack is not of any immediate concern. So, unless I misunderstand either camp, ODF is first attacking the client end of the stack, and ODFF is attacking the backbone server end of the stack. The former wants to break the MSOffice monopoly by allowing people to escape those proprietary encodings, and the latter wants to prevent the dependency on server software like Exchange and Sharepoint by allowing MS documents to travel to other destinations than MS "server" products. Is this correct? I have yet to see anyone summarize the differences in any non-partisan way, so I am at a loss and not enough information is forthcoming for me to see what's what. The usual diatribe by people closer to the action is to go into the history of ODF or ODFF, talk about old slights and lost fights, and somehow try to pull at emotional heartstrings so as to gain mindshare. Gary's set of comments on this blog have that flavor. This is childish on both sides. Furthermore, the word "orthogonal" comes to mind. I often see people too busy arguing their POV, and not listening to others, when there is no real argument to keep making. It's apple-and-oranges. ODF vs ODFF seems like they are caught in this trap. Everyone wants to win an argument that has no possible win because the participants are not arguing about the same thing. Tell me: Why can't the two parties get along? I can see a "cooperative" that attacks the entire stack. Am I the only one seeing this? Am I wrong? If yes, what's the fundamental difference that prevents cooperation?
  •  
    AlphaDog When asked about the source of his incredible success, the hockey great Wayne Gretzky replied, "I skate to where the puck is going to be, not where it has been." You and i need to do the same. Let me state our position as this: The desktop office suite is where the puck has been. The Exchange/SharePoint Hub is where it's going to be. The E/S Hub is the core of an emerging Microsoft specific web platform which we've also called, the MS Stack. In this stack, MSOffice is relegated to the task of a rich client end user interface into the E/S Hub of business processes and collaborative computing connections. The rest of the MS Stack swirls like a galaxy of services around the E/S Hub. Key to Microsoft's web platform is the gradual movement of MSOffice bound business processes to the E/S Hub where they connect to the rest of the MS Stack. So what now you might ask? Some things to consider before we get down to brass tacks: ... There is a way to break the monopolists MSOffice desktop grip, but it's not a rip out and replace the desktop model. It's a beat them at the E/S Hub model that then opens up the desktop space. And opens it up totally. (this is a 3-5 year challenge though since it's a movement of currently bound business processes). ... It's all about the business processes. Focusing entirely on the file formats is to miss the big picture. ... The da Vinci group's position is this; we believe we can neutralize and re purpose MSOffice by converting in proce
Gary Edwards

LOL :: Microsoft's Jean Paoli on the XML document debate - 0 views

  • What’s distinctive about the goals of OOXML? Primarily, to have full fidelity with pre-existing binary documents created in Microsoft Office. “What people want is to make sure that their billions of important documents can be saved in a format where they don’t lose any information. As a design goal, we said that those formats have to represent all the information that enables high-fidelity migration from the binary formats”, says Paoli. He mentions work with institutions including the British Library and the US Library of Congress, concerned to preserve the information in their electronic archive. I asked Paoli if such users could get equally good fidelity by converting their documents to ODF. “Absolutely not,” he says. “I am very clear on that. Those two formats are done for different reasons.” What can go wrong? Paoli gives as an example the myriad ways borders can be drawn round tables in Microsoft Office and all its legacy versions. “There are 100 ways to draw the lines around a table,” he says. “The Open XML format has them all, but ODF which has not been designed for backward compatibility, does not have them. It’s really the tip of the iceberg. So if someone translates a binary document with a table to ODF, you will lose the framing details. That is just a very small example.”
  • “Open Document Format and Office Open XML have very different goals”, says Paoli, responding to the claim that the world needs only one standard XML format for office documents. “Both of them are formats for documents … both are good.”
    • Gary Edwards
       
      The door should have been slammed shut on OOXML near five years ago when, on December 14th, 2006, at the very first OASIS ODF TC meeting, Stellent's Phil Boutros proposed that the charter include, "compatibility with existing file formats and interoperability with existing applications" as a priority objective.
  • I put it to Paoli that OOXML is hard to implement because of all its legacy support, some of which is currently not well documented. “I don’t believe that at all. It’s actually the opposite,” he says. He make the point that third parties like Corel, which have previously implemented support for binary formats like .doc and .xls, should find it easy to transition to OOXML. “We believe Open XML adoption by vendors like Corel will be very easy because they have already been doing 90% of the work, doing the binary formats. The features are already there.”
    • Gary Edwards
       
      WordPerfect does an excellent import of MSWord .doc documents. But there is no conversion! It's a read only rendering. Once you start editing the document in WP, all kinds of funny things happen, and the perfect fidelity melts away like the wicked witch of west in a bucket full of water.
  • ...5 more annotations...
  • Another benefit Paoli claims for OOXML is performance. “A lot of things are designed differently because we believe it will work faster. The spreadsheet format has been designed for very big spreadsheets because we know our users, especially in the finance industry, use very large spreadsheets.
    • Gary Edwards
       
      Wrong. The da Vinci plug-in prototype we demonstrated to Massachusetts on June 19th, 2006 proved that there is little or no difference in spreadsheet performance between a OOXML file, and an ODF file.

      In fact, ODF version of the extremely large test file beat the OOXML load by 12 seconds.

      Where the performance difference comes in is at the application level. MS Excel can load a OOXML version of a large spreadsheet faster than OpenOffice can load an ODF version of that same spreadsheet.

      If you eliminate the application differential, and load the OOXML file and the ODF version of that same spreadsheet into a plug-in enabled Excel, the performance differences are negligible.

      The reason for this is that the OOXML plug-in for Excel has a conversion overhead identical to the da Vinci plug-in for Excel. It has nothing to do with the file format, and everythign to do with the application.

      ~ge~
  • Paoli points to the conversion errors as evidence of how poorly ODF can represent legacy Office documents. My hunch is that this has more to do with the poor quality of the converter.
    • Gary Edwards
       
      Note that these OASIS ODF TC November 20th iX "interoperability enhancement" suggestions were submitted by Novell as part of their effort to perfect a OOXML plug-in for OpenOffice!!!!

      "Lists" were th first of these iX items to be submitted as formal proposal. And Sun fought that list proposal viciously for the next four months. The donnybrook resulted i a total breakdown of the ODF consensus process. But, it ensured that never again would anyone be stupid enough to challenge Sun's authority and control of the OASIS ODF TC.

      Sun made it clear that they would viciously oppose any other efforts to establish interoperability with existing Microsoft documents, applications, processes effort.

      Point taken.

      ~ge~
  • the idea that Sun is preparing a reference implementation of OOXML is laughable.
    • Gary Edwards
       
      Sorry Tim. It's true. Sun and Novell are working together to develop native OOXML file support in OpenOffice. You can find this clearly stated in the Gullfoss Planet OpenOffice blogs.

      The funny thing is that Sun will have to implement and support the November 20th iX enhancements submitted by Novell!! (Or, the interoperability frameworks also submitted by Novell in February of 2007). There is simply no other way for OpenOffice to implement OOXML with the needed fidelity.

      ~ge~
  • One of new scenarios enabled by the “custom xml parts” (again, if you read their blogs, you must have heard of this stuff) is the ability to bind xml sources and a control+layout so that it enables the equivalent of data queries (we’ve had in Excel for many years already), just with a source which is part of the package, contrary to the typical external data source connection. Well this stuff, besides the declaration (which includes, big surprise, GUIDs and stuff like that) requires the actual Office 2007 run-time to work. So whenever MS says this stuff is interoperable, they cannot mean you can take this stuff away in another application. Because you can’t. This binding is more or less the same than the embedding of VBA macros. It’s all application-specific, and only Microsoft’s own suite knows how to instantiate this stuff.
    • Gary Edwards
       
      Stephan whacks this one out of the park! Smart Documents will replace VBa scripts, macros and OLE functionality going forward. It's also the data binding - workflow and metadata model of the future. And it's all proprietary!

      It's the combination of OOXML plus the MSOffice- Vista Stack specific Smart Documents that will lock end users into the Vista Stack for years to come.

      Watch out Google!

      ~ge~
  • Has Microsoft published the .doc spec publicly? Then why should ODF worry about the past? It’s not ODF’s concern to worry about Microsoft’s past formats. (Understand that the .doc format alone changed six times in the last eight versions of Office!) That’s Microsoft’s legacy problem, not ODF’s.
    • Gary Edwards
       
      There really is no need to access the secret binary blueprints. The ACME 376 plug-in demonstration proves this conclusively. The only thing the ACME 376 demo lacks is that we didn't throw the switch on the magic key to release all VBa scripts, macros and OLE bindings to ACME. But that can be done if someone is serious about converting the whole shebang of documents, applications and processes.

      The real problem is that although ACME 376 proves we can hit the high fidelity required, it is impossible to effectively capture that fidelity in ODF without the iX interoperability enhancements. The world expects ODF interoperability. But as long as Sun opposes iX, we can't pipe from ACME 376 to ODF.

      ~ge~
  •  
    Tim Anderson interviews Microsoft's Jean Paoli about MOOXML and ODF.    Jean Paoli of course has the predictable set of answers.  But Tim anderson provides us with some interesting insights and comments of his own.  There is also a gem of a comment from Stephane Rodriquez, the reknown spreadsheet expert.

    The bottom line for Microsoft has not changed.  MOOXML exists because of the need for an XML file format compatible with the legacy of existing MSOffic ebinary documents.  He claims that ODF is not compatible, and offers the "page borders" issue as an example.

    Page borders?  What's that got to do with the ODF file format?   These are application specific, application bound proprietary graphics that can not be ported to any other application - like OpenOffice.  The reason has nothign whatsoever to do with ODF and everything to do with the fact that the page border library is bound to MSOffice and not available to other applications like OpenOffice. 

    So here is an application specific feature tha tJean Paoli claims can not be expressed in ODF, but can in MOOXML.  But when are running the da Vinci ODF plugin in MSWord, there is no problem whatsoever in capturing the page borders in ODF!!!!!!!!!!!!!!!!!!!!!!!!!!!  No problem!!!!!!!!!!

    The problem is opening up that same da Vinci MSWord document in OpenOffice.  That's where the page borders are dropped.  The issue is based entirely on the fact that OpenOffice is unable to render these MSWord specific graphics bound to an MSOffice only library.

    If however we take that same page border loaded da Vinci MSWord document, and send it half way across the world to another MSWord desktop running da Vinci, the da Vinci plugin easily loads the ODF document into MSWord where it is perfectly rendered, page borders and all!!!!!!!!

    Now i will admit that this is one very difficult issue to understand.  If not f
  •  
    Great interview. Tim can obviously run circles around poor Jean Paoli.
Gary Edwards

What Oracle Sees in Sun Microsystems | NewsFactor Network - 0 views

  • Citigroup's Thill estimates Oracle could cut between 40 percent and 70 percent of Sun's roughly 33,000 employees. Excluding restructuring costs, Oracle expects Sun to add $1.5 billion in profit during the first year after the acquisition closes this summer, and another $2 billion the following year. Oracle executives declined to say how many jobs would be eliminated.
  • Citigroup's Thill estimates Oracle could cut between 40 percent and 70 percent of Sun's roughly 33,000 employees. Excluding restructuring costs, Oracle expects Sun to add $1.5 billion in profit during the first year after the acquisition closes this summer, and another $2 billion the following year. Oracle executives declined to say how many jobs would be eliminated.
  •  
    Good article from Aaron Ricadela. The focus is on Java, Sun's hardware-Server business, and Oracle's business objectives. No mention of OpenOffice or ODf though. There is however an interesting quote from IBM regarding the battle between Java and Microsoft .NET. Also, no mention of a OpenOffice-Java Foundation that would truly open source these technologies.

    When we were involved with the Massachusetts Pilot Study and ODF Plug-in proposals, IBM and Oracle lead the effort to open source the da Vinci plug-in. They put together a group of vendors known as "the benefactors", with the objective of completing work on da Vinci while forming a patent pool - open source foundation for all OpenOffice and da Vinci source. This idea was based on the Eclipse model.

    One of the more interesting ideas coming out of the IBM-Oracle led "benefactors", was the idea of breaking OpenOffice into components that could then be re-purposed by the Eclipse community of developers. The da Vinci plug-in was to be the integration bridge between Eclipse and the Microsoft Office productivity environment. Very cool. And no doubt IBM and Oracle were in synch on this in 2006. The problem was that they couldn't convince Sun to go along with the plan.

    Sun of course owned both Java and OpenOffice, and thought they could build a better ODF plug-in for OpenOffice (and own that too). A year later, Sun actually did produce an ODF plug-in for MSOffice. It was sent to Massachusetts on July 3rd, 2007, and tested against the same set of 150 critical documents da Vinci had to successfully convert without breaking. The next day, July 4th, Massachusetts announced their decision that they would approve the use of both ODF and OOXML! The much hoped for exclusive ODF requirement failed in Massachusetts exactly because Sun insisted on their way or the highway.

    Let's hope Oracle can right the ship and get OpenOffice-ODF-Java back on track.

    "......To gain
Gary Edwards

Microsoft playing three card monte with XML conversion, with Sun as the "outside man" w... - 0 views

  • In a highly informative post to his Open Stack blog Wednesday, Edwards explains how three key features are necessary for organizations to convert to open formats. These are: Conversion Fidelity - the billions of binaries problem Round Trip Fidelity - the MSOffice bound business processes, line of business integrated apps, and assistive technology type add-ons Application Interop - the cross platform, inter application, cross information domain problem
  •  
    Dana Blankenhorn posted this article back in March of 2007.  It was right at the time when the OASIS ODF TC and Metadata XML/RDF SC (Sub Committee) were going at it hammer and tong concerning three very important file format characteristics needed to fulfill a real world interoperability expectation:

    .... Compatibility - file format level interop -
    :::  backwards compatibility / compatibility with existing file formats, including the legacy of billions of binary Microsoft documents

    ....... Interoperability - application level interop-
    ::::::  application interoperability including interop with all Microsoft applications

Gary Edwards

Ripped Off by Rob Weir - Again - 0 views

  • An intriguing idea is whether we can have it both ways. Suppose you are in an ODF editor and you have a "Save for archiving..." option that would save your ODF document as normal, but also generate a PDF version of it and store it in the zip archive along with ODF's XML streams. Then digitally sign the archive along with a time stamp to make it tamper-proof. You would need to define some additional access conventions, but you could end up with a single document that could be loaded in an ODF editor (in read-only mode) to allow examination of the details of spreadsheet formulas, etc., as well as loaded in a PDF reader to show exactly how it was formated.
  •  
    Intriguing?  Rob Weir knows full well that the Foundation proposed this exact same feature set as part of the da Vinci Plug-in design for Massachusetts, July of 2006!!!!!!!!!

    The Complete Feature list of the da Vinci plug-in for MSOffice that was proposed and signed off on by CIO Louis Gutierrez in early August of 2006 was well known by IBM's representatives who were working hand in hand with us at the time: Rob Weir, Don Harbison and Doug Heintzman. 

    Louis Gutierrez had asked IBM and Oracle to create a "benefactors Group" to overcome the challenge that Massachusetts ITD did not have a budget.  IBM and Oracle selected Google, Sun, Novell, Intel, and Nokia as key benefactors.  The group was provided with the complete feature set and roadmap for da Vinci development. 

    The da Vinci roadmap was the schedule announced by Louis Gutierrez in his mid year report, August 17th, 2006.

    The da Vinci plug-in feature set, in order of priority, consisted of:
    ODF iX Approval at OASISPlug-in for MS WORDAccessibility Interface for all ODF documents in MS WordPDF - ODF iX Digital Signature containerPlug-in for MS ExcelInteroperability Wizard for OpenOfficePlug-in for PowerPointXForms InterfaceThe roadmap we provided Louis and the "benefactors" was sceduled out with deliverables, test periods, and cost per deliverable.  The buy-in per "benefactor" was set at $350,000, and i
Gary Edwards

Comments Received in Response to JTC 1 N 8455 - 30 Day Review for Fast Track Ballot ECM... - 0 views

  •  
    Well, this is interesting.

    What part of "Executive Board" makes you think they read 6,000 page XML specifications? <ge>

    I think, in the best bureaucratic tradition, they argued definitions until they convinced themselves that they didn't need to do anything.  They decided that one standard contradicts another standard only if the proposed standard causes the existing standard not to work.  This is from analogy with the Chinese WAPI WiFi networking standard last year that was defeated because the protocol caused radio interference with existing 801.11 networks.  So they said that OOXML did not contradict ODF because both files could exist on the same disk without interfering with each other.   You will note that thiss argument can be used for every XML format, every programming language, every operating system, in fact every software standard, since software is ultimately data, and data can be segregated on disks.  So they essentially chose a definition so narrow that it nullified the concept of "contradiction" for most of what JTC1 has authority over.<!-- D(["mb","<div><br><span style\u003d\"color:rgb(0, 0, 153)\"><ge>  Wait a second.   You cannot have a OOXML document and a ODF document sitting on the same disk without having them interfer with each other.  We just proved that with our tests of both ACME 374 and ODF Da Vinci plugin on the latest release of MSOffice Word 2007.\n</span><br style\u003d\"color:rgb(0, 0, 153)\"><br style\u003d\"color:rgb(0, 0, 153)\"><span style\u003d\"color:rgb(0, 0, 153)\">OOXML clearly does interfere with the loading of an ODF file into MSWord 2007.  In prior versions of MSWord (98, 2000, XP, 2003
Gary Edwards

Indecision in Redmond as Web apps charge : Office 2.0 and Google Apps - 0 views

  • the fact is that Redmond could own this new space if it wanted to. All it would need to do is push interoperability and integration between lightweight Web versions of Office applications and its desktop fatware. Advanced features would be absent from the lightweight versions, but the company could ensure any Office doc would load on the Web -- whatever new desktop service packs and upgrades might appear -- and online document management could be integrated with Windows for offline access.
  •  
    Great quote from Eric Knorr.  He hits the nail on the head here, pointing out the problem Office 2.0  Web Apps and SaaS apps face:  If these Web wonders have interoperability and high fidelity document exchange with MSOffice, their collaborative features are value added wonders for existing business processes and workgroup-workflow scenarios.  If, on the other hand they lack this level of interop - integration with MSOffice documents and processes, the value add becomes a problematic split in a business process.  The only way to overcome that kind of a split is to take the entire process.  Which is difficult for lightweight mashup happy web wonders to do.

    Which leaves each and every one of these Office 2.0 - Web 2.0 - Saas Apps vulnerable to Microsoft.  As long as Micrsoft owns the interop-integration keys to MSOffice, the web wonders live a precarious life.  At any time Microsoft can swoop in and take it all.

    Today, the MSOffice OOXML file format displays perfectly in a browser.  It's 100% web ready, but only the MS Stack of applications gets to play.  Web wonders are not likely to recieve a Redmond invite now or ever.

    Which brings us to the issue of the da Vinci plug-in for MSOffice.  da Vinci is a clone of the OOXML plug-in for MSOffice, and fully leverages the same internal conversion process that OOXML enjoys.  It can achieve the same high fidelity "round trip" conversion that OOXML is capable of.  Maybe even better. 

    The problem for da Vinci isn't conversion fidlelity.  Nor is it capturing  business process important VBa scripts, macros, OLE, and security settings.  da Vinci can do that just fine.  The problem is that da Vinci cannot pipe MSOffice developer platform documents into ODF!!  For the love of five generic eXtensions, called the iX "interoperability enhancements", which the OASIS ODF TC blew off, ODF
Gary Edwards

Open Document Foundation Gives Up | Linux Magazine - 0 views

  • The reasons for the move to CDF was improved compatibility with Microsoft’s OOXML format the foundation claimed at the time. Cris Lilley from W3C contradicted. CDF is not an office format, and thus not an alternative to the Open Document Format. This turn-down is likely the reason for the abrupt ditching of the foundation.
  •  
    I've got to give this one extra points for creativity!  All anyone has to do is visit the W3C web sites for CDF WICD Full 1.0 to realize that there is in fact a CDf profile for desktops.  CDF WICD Mobile is the profile for devices.

    My guess is that Chris Lilley is threading the needle here.  IBM, Groklaw, and the lawyer for OASIS have portrayed the Foundation's support for CDF WICD Full as a replacement for ODF - as in native file format for OpenOffice kind of replacement.  Mr. Lilley insists that CDF WiCD Full was not designed for that purpose.  It's for export only!  As in a conversion of native desktop file formats.

    Which is exactly what the da Vinci group was doing with MSOffice.  The Foundation's immediate interest in CDF WICD was based on the assumption that a similar conversion would be possible between OpenOffice ODF and CDF WICD.

    The Foundation's thinking was that if the da Vinci group could convert MSOffice documents and processes to CDF WICD Full, and, a similar conversion of OpenOffice ODF documents and processes to CDF WICD could be done, then near ALL desktop documents could be converted into a highly interoperable web platform ready format.

    Web platform ready documents from OpenOffice?  What's not to like?  And because the conversion between ODF and CDF WICD Full is so comparatively clean, OpenOffice would in effect, (don't go native file format now) become ahighly integrated rich client end user interface to advancing web platforms.

    The Foundation further reasoned that this conversion of OpenOffice ODF to CDF WICD Full would solve many of the extremely problematic interoperability problems that plague ODF.  Once the documents are in CDF WICD Full, they are cloud ready and portable at a level certain to diminish the effects of desktop applications specific feature sets and implementation models.

    In Massachusetts, the Foundation took
Gary Edwards

Brian Jones: Open XML Formats : Mapping documents in the binary format (.doc; .xls; .pp... - 0 views

  • The second issue we had feedback on was an interest in the mapping from the binary formats into the Open XML formats. The thought here was that the most effective way to help people with this was to create an open source translation project to allow binary documents (.doc; .xls; .ppt) to be translated into Open XML. So we proposed the creation of a new open source project that would map a document written using the legacy binary formats to the Open XML formats. TC45 liked this suggestion, and here was the TC45 response to the national body comments: We believe that Interoperability between applications conforming to DIS 29500 is established at the Office Open XML-to- Office Open XML file construct level only.
    • Gary Edwards
       
      And here i was betting that the blueprints to the secret binaries would be released the weekend before the September 2nd, 2007 ISO vote on OOXML! Looks like Microsoft saved the move for when they really had to use it; jus tweeks before the February ISO Ballot Resolution Meetings set to resolve the Sept 2nd issues. The truth is that years of reverse engineering have depleted the value of keeping the binary blueprints secret. It's true that interoperability with MSOffice in the past was near entirely dependent on understanding the secret binaries. Today however, with the rapid emergence of the Exchange/SharePoint juggernaught, interop with MSOffice is no longer the core issue. Now we have to compete with E/S, and it is the E/S interfaces, protocols and document API's and dependencies tha tmust be reverse engineered. The E/S juggernaught is now surging to 70% or more of the market. These near monopoly levels of market penetration is game changing. One must reverse engineer or license the .NET libraries to crack the interop problem. And this time it's not just MSOffice. Today one must crack into the MS Stack whose core is tha tof MSOffice <> E/S. So why not release the secret binary blueprints? If that's the cost of getting the application, platform and vendor specific OOXML through ISO, then it's a small price to pay for your own international standard.
  •  
    Well well well. We knew that IBM had access to the secret binary blueprints back in 2006. Now we know that Sun ALSO had access!
    And why is this important? In June of 2006, Massachusetts CIO Louis Gutierrez asked the OpenDocument Foundation's da Vinci Group to work with IBM on developing the da Vinci ODF plug-in clone of Microsoft's OOXML Compatibility Pack plug-in. When we met with IBM they were insistent that the only way OASIS ODF could establish sufficient compatibility with MSOffice and the billions of binary documents would be to have the secret blueprints open.
    Even after we explained to IBM that da Vinci uses the same internal conversion process that the OOXML plug-in used to convert binaries, IBM continued to insist that opening up the secret binaries was a primary objective of the OASIS ODF community.
    For sure this was important to IBM and Sun, but the secret binaries were of no use to us. da Vinci didn't need them. What da Vinci needed instead was a subset of ODF designed for the conversion of those billions of binary documents! A need opposed by Sun.
    Sun of course would spend the next year developing their own ODF plug-in for MSOffice. But here's the thing: it turns out that Sun had complete access to the secret binary blueprints dating back to 2006!!!!!!
    So even though IBM and Sun have had access to the blueprints since 2006, they have been unable to provide effective conversions to ODF!
    This validates a point the da Vinci group has been trying to make since June of 2006: the problem of perfecting a high fidelity conversion between the billions of binaries and ODF has nothing to do with access to the secret binary blueprints. The real issue is that ODF was NOT designed for the conversion of those binary documents.
    It is true that one could eXtend ODF to achieve the needed compatibility. But one has to be very careful before taking this ro
Gary Edwards

The End of ODF & OpenXML - Hello ODEF! - 0 views

  •  
    Short slide deck of Barbara Held's February 28th, 2007 EU IDABC presentation. She introduces ODEF, the "Open Document Exchange Format" which is designed to replace both ODF and OpenOfficeXML. ComputerWorld recently ran a story about the end of ODF, as they covered the failure of six "legislative" initiatives designed to mandate ODF as the official file format. While the political treachery surrounding these initiatives is a story in and of itself, the larger story, the one that has world wide reverberations, wasn't mentioned. The larger ODF story is that ODF vendors are losing the political battles because they are unable to provide government CIO's with real world solutions. Here are three quotes from the California discussion that really say it all: "Interoperability isn't just a feature. It's the basic requirement for getting your XML file format and applications considered"..... "The challenge is that of migrating our existing documents and business processes to XML. The question is which XML? OpenDocument or OpenXML?" ....... "Under those conditions, is it even possible to implement OpenDocument?" ....... Bill Welty, CIO California Air Resource Board wondering if there was a way to support California legislative proposal AB-1668. This is hardly the first time the compatibility-interoperability issue has challenged ODf. Massachusetts spent a full year on a pilot study testing the top tier of ODF solutions: OpenOffice, StarOffice, Novell Office and IBM's WorkPlace (prototype). The results were a disaster for ODF. So much so that the 300 page pilot study report and accompanying comments wiki have never seen the light of day. In response to the disastrous pilot study, Massachusetts issued their now infamous RFi; a "request for information" about whether it's possible or not to write an ODF plugin for MSOffice applications. The OpenDocument Foundation responded to the RFi with our da Vinci plugin. The quick descriptio
Gary Edwards

Microsoft Watch Finally Gets it - It's the Business Applications!- Obla De OBA Da - 0 views

  • To be fair, Microsoft seeks to solve real world problems with respect to helping customers glean more value from their information. But the approach depends on enterprises adopting an end-to-end Microsoft stack—vertically from desktop to server and horizontally across desktop and server products. The development glue is .NET Framework, while the informational glue is OOXML.
    • Gary Edwards
       
      OOXML is the transport - a portable XML document model where the "document" is the interface into content/data/ and media streaming.

      The binding model for OOXML is "Smart Documents", and it is proprietary!

      Smart Documents is how data, streaming media, scripting-routing-workflow intelligence and metadata is added to any document object.

      Think of the ODF binding model using XForms, XML/RDF and RDFA metadata. One could even use Jabber XMP as a binding model, which is how we did the Comcast SOA based Sales and Inventory Management System prototype.

      Interestingly, Smart Documents is based on pre written widgets that can simply be dragged, dropped and bound to any document object. The Infopath applicaiton provides a highly visual means for end users to build intelligent self routing forms. But Visual Studio .NET, which was released with MSOffice 2007 in December of 2006. makes it very easy for application and line of business integration developers to implement very advanced data binding using the Smart Document widgets.

      I would also go as far to say that what separates MSOOXML from Ecma 376 is going to be primarily Smart Documents.

       Yes, there are .NET Framework Libraries and Vista Stack dependencies like XAML that will also provide a proprietary "Vista Stack" only barrier to interoperability, but Smart Documents is a killer.

      One company that will be particularly hurt by Smart Documents is Google. The reason is that the business value of Google Search is based on using advanced and closely held proprietary algorithms to provide metadata structure for unstrucutred documents.

      This was great for a world awash in unstructured documents. By moving the "XML" structuring of documents down to the author - workgroup - workflow application level though, the world will soon enough be awash in highly structured documents that have end user metadata defining document objects and
  • Microsoft seeks to create sales pull along the vertical stack between the desktop and server.
    • Gary Edwards
       
      The vertical stack is actually desktop - server - device - web based.  The idea of a portable XML document is that it must be able to transition across the converged application space of this sweeping stack model.

      Note that ODF is intentionally limited to the desktop by it's OASIS Charter statement.  One of the primary failings of ODF is that it is not able to be fully implemented in this converged space.  OOXML on the other hand was created exactly for this purpose!

      So ODF is limited to the desktop, and remains tightly bound to OpenOffice feature sets.  OOXML differs in that it is tightly bound to the Vista Stack.

      So where is an Open Stack model to turn to?

      Good question, and one that will come to haunt us for years to come.  Because ODF cannot move into the converged space of desktop to server to device to the web information systems connected through portable docuemnt/data transport, it is unfit as a candidate for Universal File Format.

      OOXML is unfi as a UFF becuase it is application - platform and vendor bound.

      For those of us who believe in an open and unencumbered universal file format, it's back to the drawing board.

      XHTML+ (XHTML + CSS3 + RDF) is looking very good.  The challenge is proving that we can build plugins for MSOffice and OpenOffice that can fully implement XHTML+.  Can we conver the billions of binary legacy documents and existing MSOffice bound business processes to XHTML+?

      I think so.  But we can't be sure until the da Vinci proves this conclusively.

      One thign to keep in mind though.  The internal plugins have already shown that it is possible to do multiple file formats.  OOXML, ODF, and XML encoded RTF all have been shown to work, and do so with a level of two way conversion fidelity demanded by existing business processes.

      So why not try it with XHTML+, or ODEF (the eXtended version of ODF en
  • Microsoft's major XML-based format development priority was backward compatibility with its proprietary Office binary file formats.
    • Gary Edwards
       
      This backwards compatibility with the existing binary file formats isn't the big deal Micrsoft makes it out to be.  ODF 1.0 includes a "Conformance Clause", (Section 1.5) that was designed and included in the specification exactly so that the billions of binary legacy documents could be converted into ODF XML.

      The problem with the ODF Conformance Clause is that the leading ODF application, OpenOffice,  does not fully support and implement the Conformance Clause. 

      The only foreign elements supported by OpenOffice are paragraphs and text spans.  Critically important structural document characteristics such as lists, fields, tables, sections and page breaks are not supported!

      This leads to a serious drop in conversion fidelity wherever MS binaries are converted to OpenOffice ODF.

      Note that OpenOffice ODF is very different from MSOffice ODF, as implemented by internal conversion plugins like da Vinci.  KOffice ODF and Googel Docs ODF are all different ODF implementations.  Because there are so many different ways to implement ODF, and still have "conforming" ODF documents, there is much truth to the statement that ODF has zero interoperabiltiy.

      It's also true that OOXML has optional implementation areas.  With ODF we call these "optional" implementation areas "interoperabiltiy break points" because this is exactly where the document exchange  presentation fidelity breaks down, leaving the dominant market ODF applicaiton as the only means of sustaining interoperabiltiy.

      With OOXML, the entire Vista Stack - Win32 dependency layer is "optional".  No doubt, all MSOffice - Exchange/SharePoint Hub applications will implement the full sweep of proprietary dependencies.    This includes the legacy Win32 API dependencies (like VML, EMF, EMF +), and the emerging Vista Stack dependencies that include Smart Documents, XAML, .NET 3.0 Libraries, and DrawingML.

      MSOffice 2007 i
  • ...6 more annotations...
  • Microsoft's backwards compatibility priority means the company made XML-based format decisions that compromise the open objectives of XML. Open Office XML is neither open nor XML.
    • Gary Edwards
       
      True, but a tricky statement given that the proprietary OOXML implementation is "optional".  It is theoretically possible to implement Ecma 376 without the prorpietary dependencies of MSOffice - Exchange/SharePoint Hub - Vista Stack "OOXML".

      In fact, this was first demonstrated by the legendary document processing - plugin architecture expert, Florian Reuter.

      Florian has the unique distinction of being the primary architect for two major plugins: the da Vinci ODF plugin for MSOffice, and, the Novell OOXML Translator plugin for OpenOffice!

      It is the Novell OOXML Translator Plugin for OpenOffice that first demonstrated that Ecma 376 could be cleanly implemented without the MSOffice application-platform-vendor specific dependencies we find in every MSOffice OOXML document.

      So while Joe is technically correct here, that OOXML is neither open nor XML, there is a caveat.  For 95% of all desktops and near 100% of all desktops in a workgroup, Joe's statment holds true.  For all practical concerns, that's enough.  For Microsoft's vaunted marketing spin machine though, they will make it sound as though OOXML is actually open and application-platform-vendor independent.


  • Microsoft got there first to protect Office.
    • Gary Edwards
       
      No. I disagree. Microsoft needs to move to XML structured documents regardless of what others are doing. The binary document model is simply unable to be useful to any desktop- to server- to device- to the web- transport!

      Many wonder what Microsoft's SOA strategy is. Well, it's this: the Vista Stack based on OOXML-Smart Documents-.NET.

      The thing is, Microsoft could not afford to market a SOA solution until all the proprietary solutions of the Vista Stack were in place.

      The Vista Stack looks like this:

      ..... The core :: MSOffice <> OOXML <> IE <> The Exchange/SharePoint Hub

      ..... The services :: E/S HUb <> MS SQL Server <> MS Dynamics <> MS Live <> MS Active Directory Server <> MSOffice RC Front End

      The key to the stack is the OOXML-Smart Documents capture of EXISTING MSOffice bound business processes and documents.

      The trick for Microsoft is to migrate these existing business processes and documents to the E/S Hub where line of business developers can re engineer aging desktop LOB apps.

      The productivity gains that can be had through this migration to the E/S Hub are extraordinary.

      A little over a year ago an E/S Hub verticle market application called "Agent Achieve" came out for the real estate industry. AA competed against a legacy of twenty years of contact management based - MLS data connected desktop shrinkware applications. (MLS-Multiple Listing Service)

      These traditional desktop client/server productivity apps defined the real estate business process as far as it could be said to be "digital".  For the most part, the real estate transaction industry remains a paper driven process. The desktop stuff was only useful for managing clients and lead prospecting. No one could crack the electronic documents - electonic business transaction model.  This will no doubt change with the emer
  • Microsoft can offer businesses many of the informational sharing and mining benefits associated with the markup language while leveraging Office and supporting desktop and server products as the primary consumption conduit.
    • Gary Edwards
       
      Okay, now Joe has the Micrsoft SOA bull by the horns.  Why doesn't he wrestle the monster down?
  • By adapting XML
    • Gary Edwards
       
      The requirements of these E/S Hub systems are XP, XP MSOffice 2003 Professional, Exchange Server with OWL (Outlook on the Web) , SharePoint Server, Active Directory Server, and at least four MS SQL Servers!

      In Arpil of 2006, Microsoft issued a harsh and sudden End-of-Life for all Windows 2000 - MSOffice 2000 systems in the real estate industry (although many industries were similarly impacted). What happened is that on a Friday afternoon, just prior to a big open house weekend, Microsoft issued a security patch for all Exchange systems. Once the patch was installed, end users needed IE 7.0 to connect to the Exchange Server Systems.

      Since there is no IE 7.0 made for Windows 2000, those users relying on E/S Hub applications, which was the entire industry, suddenly found themselves disconnected and near out of business.

      Amazingly, not a single user complained! Rather than getting pissed at Microsoft for the sudden and very disruptive EOL, the real estate users simply ran out to buy new XP-MSOffice 2003 systems. It was all done under the rational that to be competitive, you have to keep up with technology systems.

      Amazing. But it also goes to show how powerfully productive the E/S Hub applications can be. This wouldn't have happened if the E/S Hub applications didn't have a very high productivity value.

      When we visited Massachusetts in June of 2006, to demonstrate and test the da Vinci ODF plugin for MSOffice, we found them purchasing en mass E/S Hubs! These are ODF killers! Yet Microsoft sales people had convinced Massachusetts ITD that Exchange/SahrePoint was a simple to use eMail-calendar-portal system. Not a threat to anyone!

      The truth is that in the E/S Hub ecosystem, OOXML is THE TRANSPORT. ODF is a poor, second class attachment of no use at the application - document processing chain level.

      Even if Massachusetts had mandated ODF, they were only one E/S Hub Court Doc
  • Microsoft will vie for the whole business software stack, a strategy that I believe will be indisputable by early 2009 at the latest.
    • Gary Edwards
       
      Finally, someone who understands the grand strategy of levergaing the desktop monopoly into the converged space of server, device and web information systems.

      What Joe isn't watching is the way the Exchange/SharePoint Server connects to MS SQL Server, Active Directory Server, MS LIve and MS Dynamics.

      Also, Joe does not see the connection between OOXML as the portable XML document/data transport, and the insidiously proprietary Smart Documents metadata - data binding system that totally separates MSOOXML from Ecma 376 OOXML!
  • I'm convinced that Office as a platform is an eventual dead end. But Microsoft is going to lead lots of customers and partners down that platform path.
    • Gary Edwards
       
      Yes, but the new platform for busines process development is that of MSOffice <> Exchange/SharePoint Hub.

      The OOXML-Smart Docs transport replaces the old binary document with OLE and VBA Scripts and Macros functionality.  Which, for the sake of brevity we can call the lead Win32 API dependencies.

      One substantial difference is that OOXML-Smart Docs is Vista Stack ready, while the Win32 API dependencies were desktop bound.

      Another way of looking at this is to see that the old MSOffice platform was great for desktop application integration.  As long as the complete Win32 API was available (Windows + MSOffice + VBA run times), this platform was great for workgroups.  The Line of Business integrated apps were among the most brittle of all client/server efforts, bu they were the best for that generation.

      The Internet offers everyone a new way of integrating data, content and streaming media.  Web applications are capable of loosly coupled serving and consuming of other application services.  Back end systems can serve up data in a number of ways: web services as SOAP, web services as AJAX/REST, or XML data streams as in HTTPXMLRequest or Jabber P2P model.

      On the web services consumption side, it looks like AJAX/REST will be the block buster choice, if the governance and security issues can be managed.

      Into this SOA mash Microsoft will push with a sweeping integrated stack model.  Since the Smart Docs part of the OOXML-Samrt Docs transport equation is totally proprietary, but used throughout the Vista Stack, it will provide Microsoft with an effective customer lockin - OSS lockout point.

Gary Edwards

Is It Game Over? - ODF Advocate Andy UpDegrove is Worried. Very Worried - 0 views

  • This seems to me to be a turning point for the creation of global standards.&nbsp;Microsoft was invited to be part of the original ODF Technical Committee in OASIS, and chose to stand aside.&nbsp;That committee tried to do its best to make the standard work well with Office, but was naturally limited in that endeavor by Microsoft's unwillingness to cooperate.&nbsp;This, of course, made it easier for Microsoft to later claim a need for OOXML to be adopted as a standard, in order to "better serve its customers."&nbsp;The refusal by an incumbent to participate in an open standards process is certainly its right, but it is hardly conduct that should be rewarded by a global standards body charged with watching out for the best interests of all.
  •  
    Andy UpDegrove takes on the issue of Microsoft submitting their proprietary "XML alternative to PDF" proposal to Ecma for consideration as an international standard.  MS XML-PDF will compliment ECMA 376 (OOXML - OfficeOpenXML) which is scheduled for ISO vote in September of 2007.  Just a bit over 60 days from today.

    Andy points out some interesting things; such as the "Charter" similarities between MS XML-PDF and MS OOXML submisssions to Ecma:

    MS XML-PDF Scope: The goal of the Technical Committee is to produce a formal standard for office productivity applications within the Ecma International standards process which is fully compatible with the Office Open XML Formats. The aim is to enable the implementation of the Office Open XML Formats by a wide set of tools and platforms in order to foster interoperability across office productivity applications and with line-of-business systems. The Technical Committee will also be responsible for the ongoing maintenance and evolution of the standard.   Programme of Work: Produce a formal standard for an XML-based electronic paper format and XML-based page description language which is consistent with existing implementations of the format called the XML Paper Specification,…[in each case, emphasis added]

    If that sounds familiar, it should, because it echoes the absolute directive of the original OOXML technical committee charter, wh
Gary Edwards

Flow Document Overview - 0 views

  •  
    Uh OH! Look what Microsoft has put into the new .NET 3.0 SDK! Flow Documents is a Microsoft specific version of HTML that is part of the Windows Presentation Foundation Browser Developers Framework. XAML - XPS-XABL. It also looks as though Microsoft has reserved MS-OOXML MSOffice level integration for themselves. Another thought is that MSOffice is being positioned as a developers framework for Web 2.0 development. This docuemnt is goign to take some serious study. Bad news for IBM and Adobe for sure. PDF, Flash and AJAX are all going to be in the fight of their lives. The conversion tools are going to become of critical importance. Some initial thoughts are that we could convert MSOffice documents to CDF+; convert OpenOffice documents to CDF+; and convert Flow Documents to CDF+, using the same XHTML 2.0 - CSS desktop profile (WICD Full). Converting MS-OOXML to Flow Documents however appears to be next to impossible by design. The easy approach would be to let the da Vinci plug-in perfect an internal conversion to either CDF+ or Flow. It will be interesting to see if Microsoft provides a Flow plug-in for MSOffice. I doubt it, but perhaps there will be a demand from Flow developers. da Vinci could of course be configured to produce Flow Documents. At first glance, my assumption would be that the ability to convert native MSOffice documents and allication genrated Flow Documents to CDF+ would be the most important course to take. We''ll see. This is no doubt explosive stuff. Microsoft is truly challenging the W3C for the Web.
  •  
    Uh OH! Look what Microsoft has put into the new .NET 3.0 SDK! Flow Documents is a Microsoft specific version of HTML that is part of the Windows Presentation Foundation Browser Developers Framework. XAML - XPS-XABL. It also looks as though Microsoft has reserved MS-OOXML MSOffice level integration for themselves. Another thought is that MSOffice is being positioned as a developers framework for Web 2.0 development. This docuemnt is goign to take some serious study. Bad news for IBM and Adobe for sure. PDF, Flash and AJAX are all going to be in the fight of their lives. The conversion tools are going to become of critical importance. Some initial thoughts are that we could convert MSOffice documents to CDF+; convert OpenOffice documents to CDF+; and convert Flow Documents to CDF+, using the same XHTML 2.0 - CSS desktop profile (WICD Full). Converting MS-OOXML to Flow Documents however appears to be next to impossible by design. The easy approach would be to let the da Vinci plug-in perfect an internal conversion to either CDF+ or Flow. It will be interesting to see if Microsoft provides a Flow plug-in for MSOffice. I doubt it, but perhaps there will be a demand from Flow developers. da Vinci could of course be configured to produce Flow Documents. At first glance, my assumption would be that the ability to convert native MSOffice documents and allication genrated Flow Documents to CDF+ would be the most important course to take. We''ll see. This is no doubt explosive stuff. Microsoft is truly challenging the W3C for the Web.
Gary Edwards

Does ODF Have a Future? - 0 views

  •  
    This section of the Slashdot discussion of the LinuxWorld "Game Over" article concerns itself with RTF and Microsoft. ACME 376 "decodes" and converts MS RTF to XML encoded RTF. The full da Vinci process follows this chain: imbr<>MS RTF<>ACME 376<>InfoSet = output target file format MS RTF is the internal structuring stage that all in-memory-binary-representation are sent through with any conversion. Including the conversion of imbr to OOXML The OOXML plugin process looks like this: imbr<>MS RTF<>OOXML The da Vinci ODF process looks like this: imbr<>MS RTF<>ACME<>InfoSet<>ODF The da Vinci CDF process outputs to CDF instead of ODFThe reason we need to output to something other than ODF is that the OASIS ODF TC has no interest in provisioning the ODF specification with much needed iX "interoperability eXtensions". the iX eXtensions were designed to accomodate the high fidelity "round trip" conversion of existing MS documents to ODF while establishing a high level of interoperability with existing MS applications and workgroup processes.
Gary Edwards

Microsoft Will Support ODF! But Only If It Doesn't 'Restrict Choice Among Formats' - 0 views

  • By Marbux posted Jun 19, 2007 - 3:16 PM Asellus sez: "I will not say OOXML is easy to implement, but saying ODF is easier to implement just by looking at the ISO specification is a fallacy." I shouldn't respond to trolls, but I will this time. Asellus is simply wrong. Large hunks of Ecma 376 are simply undocumented. And what's more, absolutely no vendor has a featureful app that writes to that format. Not even Microsoft. There's a myth that Ecma 376 is the same as the Office Open XML used by Microsoft. It is not. I've spend a few hundred hours comparing the Ecma 376 specification (the version of OOXML being considered at ISO) to the information about the undocumented APIs used by MS Office 2007 that recently sprung loose in litigation. See http://www.groklaw.net/p...Rpt_Andrew_Schulman.pdf Each of those APIs *should* have corresponding metadata in the formats, but are not in the Ecma 376 specification.
  •  
    Incredible comment by Marbux!  With one swipe he takes out both Ecma 376 and ODF. 

    Microsoft has written a letter claiming that they will support ODF in MSOffice, but only if ISO approves Ecma 376 as a second office suite XML file format standard.  ODF was approved by ISO nearly a year ago.

    Criticizing Ecma 376 is easy.  It was designed to meet the needs of  a proprietary application, MSOffice, and, to meet the needs of the emerging MS Vista Stack of applications that spans desktop to server to device to web platforms.  It's filled with MS platform dependencies that make it impossibly non interoperable with anything not fully compliant with Microsoft owned API's.

    Criticizing ODF however is another matter entirely.  Marbux points to the extremely poor ODF interoperability record.  If MOOXML (not Ecma 376 - since that is a read only file format) is tied to vendor-application specific MSOffice, then ODF is similarly tied to the many vendor versions of OpenOffice/StarOffice.

    The "many vendor" aspect of OpenOffice is somewhat of a scam.  The interoperability that ODF shares across Novell Office, StarOffice, IBM WorkPlace, Red Office, and NeoOffice is entirely based on the fact that these iterations of OpenOffice are based on a single code base controlled 100% by Sun.  Which is exactly the case with MSOffice.  With this important exception - MOOXML (not Ecma 376) is interoperable across the entire Vista Stack!

    The Vista Stack is comprised of Exchange/SharePoint, MS Live, MS Dynamics, MS SQL Server, MS Internet Server, MS Grove, MS Collaboration Server, and MS Active Directory.   Behind these applications sits a an important foundation of shared assets: MOOXML, Smart Documents, XAML and .NET 3.0.  All of which can be worked into third party, Stack dependent applications through the Visual Studio .NET IDE.

    Here are some thoughts i wou
Gary Edwards

Linux Foundation Legal : Behind Putting the OpenDocument Foundation to Bed (without its... - 0 views

  • CDF is one of the very many useful projects that W3C has been laboring on, but not one that you would have been likely to have heard much about. Until recently, that is, when Gary Edwards, Sam Hiser and Marbux, the management (and perhaps sole remaining members) of the OpenDocument Foundation decided that CDF was the answer to all of the problems that ODF was designed to address. This announcement gave rise to a flurry of press attention that Sam Hiser has collected here. As others (such as Rob Weir) have already documented, these articles gave the OpenDocument Foundation’s position far more attention than it deserved. The most astonishing piece was written by ZDNet’s Mary Jo Foley. Early on in her article she stated that, “the ODF camp might unravel before Microsoft’s rival Office Open XML (OOXML) comes up for final international standardization vote early next year.” All because Gary, Sam and Marbux have decided that ODF does not meet their needs. Astonishing indeed, given that there is no available evidence to support such a prediction.
  •  
    Uh?  The ODF failure in Massachusetts doesn't count as evidence that ODF was not designed to be compatible with existing MS documents or interoperable with existing MSOffice applications?

    And it's not just the da Vinci plug-in that failed to implement ODF in Massachusetts!  Nine months later Sun delivered their ODF plug-in for MSOffice to Massachusetts.  The next day, Massachusetts threw in the towel, officially recognizing MS-OOXML (and the MS-OOXML Compatibility Pack plug-in) as a standard format for the future.

    Worse, the Massachusetts recognition of MS-OOXML came just weeks before the September 2nd ISO vote on MS-OOXML.  Why not wait a few more weeks?  After all, Massachusetts had conducted a year long pilot study to implement ODF using ODF desktop office sutie alternatives to MSOffice.  Not only did the rip out and replace approach fail, but they were also unable to integrate OpenOffice ODF desktops into existing MSOffice bound workgroups.

    The year long pilot study was followed by another year long effort trying to implement ODF using the plug-in approach.  That too failed with Sun's ODF plug-in the final candidate to prove the difficulty of implementing ODF in situations where MSOffice workgroups dominate.

    California and the EU-IDABC were closely watching the events in Massachusetts, as was most every CIO in government and private enterprise.  Reasoning that if Massachusetts was unable to implement ODF, California CIO's totally refused IBM and Sun's effort to get a pilot study underway.

    Across the pond, in the aftermath of Massachusetts CIO Louis Guiterrez resignation on October 4th, 2006, the EU-IDABC set about developing their own file format, ODEF.  The Open Document Exchange Format splashed into the public discussion on February 28th, 2007 at the "Open Document Exchange Workshop" held in Berlin, Germany.

    Meanwhile, the Sun ODF plug-in is fl
Gary Edwards

OpenDocument Foundation folds; will Microsoft benefit? - Mary Jo ZDNet - 0 views

  • +1 gary.edwards - 11/16/07 Thanks for the consideration Anton. You might want to follow an emerging discussion now taking place at the OpenDocument Fellowship: Interop between multiple standards and multiple applications Check on the follow up post and understand that this is the same problem the da Vinci group tried to overcome in Massachusetts, when ODF hung by a thread in the summer of 2006; with the sole hope being a plug-in conversion process capable of very high "round trip" fidelity. To assist Massachusetts and the da Vinci Group, the OpenDocument Foundation introduced to the OASIS ODF TC a series of discussions and proposals collectively known as the ODF iX interoperability enhancements. A total of six comprehensive iX enhancements were introduced between July of 2006 and March of 2007. The first three sets of iX enhancements were signed off on by CIO Louis Gutierrez, with the full knowledge and awareness of IBM (they participated directly in those discussions and i do have the emails and conference schedules to verify this . Also, if you're interested in other issues surrounding the da Vinci groups use of CDF WICD Full as an in-process conversion target for MSOffice documents, there is a series of recent responses posted in the comments section of this blog, "Going to Bed (without my supper). One last note; I do have a response to AlphaDog sitting in the blog que, where i try to put the MSOffice to CDF WICD Full conversion, and the OpenOffice ODF to CDF WICD Full conversion into the larger context of the web platform and universal interoperability. This post will also briefly explain the events immediately preceding the decision to shut the Foundation down. Hope this helps, ~ge~
Gary Edwards

ODF calls time on da Vinci coding | The Register Lucy Sherriff - 0 views

  • The Open Document Foundation (ODF) has quietly ended all work on its da Vinci project after failing to secure approval from the Organisation for the Advancement of Structured Information Standards (OASIS). The da Vinci project was to develop a class of plug-ins that would allow users "to create and edit CDF (compound document format) files in their existing Microsoft Office installations". That is to say, a user could save a .odt file within Word as easily as if it were a .doc format. document.write('\x3Cscript src="http://ad.uk.doubleclick.net/adj/reg.software.4159/applications;'+RegExCats+GetVCs()+'pid='+RegId+';'+RegKW+'maid='+maid+';test='+test+';pf='+RegPF+';dcove=d;sz=336x280;tile=3;ord=' + rand + '?" type="text/javascript">\x3C\/script>'); However, the organisation now says all work has ceased because OASIS has not granted approval of its generic extensions. Without this approval, ODF says: "We can not effectively convert existing Microsoft documents, applications and processes to ODF. The loss of fidelity and feature - business process specific information is too great."
Gary Edwards

ODF Civil War: Bulll Run - Suggested Changes on the Metadata proposal - OASIS ODF - 0 views

  • From our perspective it would be better to aim for doing the job in ODF 1.2, even if that requires delay. We will oppose ODF 1.2 at ISO unless the interoperability warts are cleaned up. What the market requires is no longer in doubt. See the slides linked above and further presentations linked from this page, &lt; http://ec.europa.eu/idabc/en/document/6474/5935&gt;. Substantial progress toward those goals would seem to be mandatory to maintain Europe's preference for a harmonized set of file formats that uses ODF to provide the common functionality. Delaying commencement of such work enhances the likelihood that governments will tire of waiting for ODF to become interoperable with MS Office and simply go with MOOXML. We may not be able to force Microsoft to participate in the harmonization work, but we will be in a far better position if we have done everything we can in aid of that interoperability without Microsoft's assistance. As the situation stands, we have what is known in the U.S. as a "Mexican stand-off," where neither side has taken a solitary step toward what Europe has requested. We have decided to do that work via a fork of ODF; it is up to this TC whether it wishes to cooperate in that effort.
  •  
    This is the famous marbux response to Sun regarding Sun's attempt to partially implement ODF 1.2 XML-RDF metadata.  It's a treasure.

    There is one problem with marbux's statement though.  We had decided long ago not to fork ODF even if the five iX "interoperability enhancement" proposals were refused by the OASIS ODF TC.   This assurance was provided to Massachusetts CIO Louis Gutierrez witht he the first ODF iX proposal submitted on July 12th, 2006.  Louis ended up signing off on three iX proposals before his resignation October 4th, 2006.

    The ODF iX enhancements were essential to saving ODF in Massachusetts.  Without them, there was no way our da Vinci plug-in could convert existing MSOffice documents and processes to ODF with the needed round trip fidelity.

    For nearly a year we tried to push through some semblance of the needed iX enhancements.  We also tried to push through a much needed Interoperability Framework, which will be critical to any ISO approval of ODF 1.2.

    Our critics are correct in that every iX effort was defeated, with Sun providing the primary opposition. 

    Still rather than fork ODF, we are simply going to move on. 

    On October 4th, 2006, all work on ODF da Vinci ended - not to be resumed unless and until we had the ODF iX enhancements we needed to crack the MSOffice bound workgroup-workflow business process barrier.

    In April of 2007, with our OASIS membership officially shredded by OASIS management, bleeding from the List Enhancement Proposal doonybrook, and totally defeated with our hope - the metadata XML-RDF work, we threw in the towel.

    Since then we've moved on to CDF, the W3C Compound Document format.  Incredibly, CDF is able to do what ODF can not.  With CDF we can solve the three primary problems confronting governments and MSOffice bound workgroups everywhere. 

    The challenge for these g
1 - 20 of 34 Next ›
Showing 20 items per page