Group items tagged

If you've been hurt by a poorly designed or manufactured product, sue the company through our Product Defect Lawyers in Albuquerque NM. Any damages caused by a product you used, you may have a defective product liability claim.

If you've been hurt by a poorly designed or manufactured product, sue the company through our Austin defective product lawyers. Any damages caused by a product you used, you may have a defective product liability claim.

If you've been hurt by a poorly designed or manufactured product, sue the company through our Baltimore defective product lawyers. Any damages caused by a product you used, you may have a defective product liability claim.

Impossible Choices presents the story of two women pregnant with fetuses that had major defects, each had to decide whether to give birth or terminate the pregnancy. This is the story of Leslie, who is from Virginia, and Mary Jo, who lives in New Jersey - both church going women faced with a moral, ethical and religious dilemma.

The appearance of the crack is a straight or irregular curve. The surface of the hot crack is strongly oxidized and becomes dark grey or black without metallic lustres. The surface of the cold crack is clean with metallic lustres. Usually, external cracks can be seen directly in x ray casting inspection machine castings, but internal cracks can only be seen by other means. Cracks are usually associated with defects such as shrinkage porosity and slag entrapment. They are mainly found in the interior of the casting sharp corners, the junction of thick and thin walls and the hot connection area where the pouring riser is connected to the casting.

The chromatic aberration of injection-molded plastic products is a common defect in injection molding. There are many factors affecting the chromatic aberration, including raw resin, colo