Group items tagged

"Water is necessary for many applications apart from sustaining life. Because it may not be available in sufficient quantity or at the quality required, some form of treatment may be necessary to meet the needs of an application. More stringent water quality specifications normally require more elaborate treatment methods. Challenges of availing clean water suitable for specific applications have led to innovations in water production to meet the needs of each sector. This research service reports on innovations in water production that specifically impact each key sector. It gives the industry snapshot of each key sector, its current water scenario, innovation landscape, global trends and technology roadmap till 2025. Several examples of innovative non-technological ways to produce or provide water are presented at the end of the report. Some key patents and contact details of key industry players are also given."

"There is currently no uniform approach to nanomaterials at the EU level and no EU register. However, nanomaterials are, to a limited extent, covered by EU sector-specific regulation. For instance the Food Information Regulation, the Cosmetics Regulation, the Medical Devices Regulation and the Biocides Regulation contain specific provisions on nanomaterials. While moreover applying to substances in the nano form, the Regulation on Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) does not currently contain specific provisions on nanomaterials."

The battery technology for plug-in HEVs and EVs (both fixed and removable) has evolved tremendously over the last decade with the introduction of lithium-based batteries complementing lead-, nickel- and sodium-based technologies. These technologies will all continue to have a significant impact on electro-mobility as they may give cost and/or performance advantages for specific applications, for example as start-stop and hybrid solutions. The selection of a technology depends on the requirements for performance, life and cost for a given application. Given the diversity of possible operating modes, there is no one battery system or technology that covers the entire range of application needs sufficiently. On the contrary, different battery energy storage technologies exist and each of them has a role to play in the future as the best solution to the needs of a system depending on their specific attributes: * Lead-based: for start-stop micro application, up to mild HEVs * Nickel-based: for HEV applications only * Lithium-based: for HEV, plug-in HEV and full EVs * Sodium-based: for Plug-in HEV and full EVs

"Do you wish there was an easier way to create a specification document for your cabling infrastructure?"

"Abstract Most baby-boomers have some familiarity with the classical stigma surrounding aluminum conductors in residential and commercial applications: fire hazard. Mention aluminum wiring in a building or residence and, not surprisingly, a lot of folks will react as if the structure in question should be condemned. How did aluminum get this reputation? Was it deserved? Is it still a valid assumption with today's modern aluminum alloys? Many of the historical stigmas associated with aluminum can be attributed to technical design problems of the older alloys that have now been overcome by higher quality materials and/or addressed by aluminum specific design considerations. This paper addresses the aforementioned issues and investigates the current status of aluminum conductor technology as applied to subsea power cables with a specific emphasis on the following: The Element Aluminum; Early History of Aluminum; Historical Stigmas; Technical Advances; Aluminum (Al) versus Copper (Cu); Aluminum Subsea Cable Experience"

"The partnership is focused squarely on standardization of automatic e-bus fast charging, including the communications protocol between the infrastructure charging solution and e-bus, the electrical interface and specifications for the rooftop automatic connection system (ACS)."

"Specifications for particular types of winding wires -"

Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)

"Specifications for particular types of winding wires - Part 84: Polyesterimide enamelled round copper wire, class 200"

"Donald Sadoway: The missing link to renewable energy Tweet this talk! (we'll add the headline and the URL) Post to: Share on Twitter Email This Favorite Download inShare Share on StumbleUpon Share on Reddit Share on Facebook TED Conversations Got an idea, question, or debate inspired by this talk? Start a TED Conversation, or join one of these: Green Home Energy=Hydrogen Generators-alternative sources Started by Kathleen Gilligan-Smith 1 Comment What is the real missing link in renewable energy? Started by Enrico Petrucco 8 Comments Comment on this Talk 60 total comments Sign in to add comments or Join (It's free and fast!) Sort By: smily raichel 0 Reply Less than 5 minutes ago: Nice smily raichel 0 Reply Less than 5 minutes ago: Good David Mackey 0 Reply 3 hours ago: Superb invention, but I would suggest one more standard mantra that they should move on from and that is the idea of power being supplied by a centralised grid. This technology seems to me to be much more beneficial on a local scale, what if every home had its own battery, then home power generation becomes economically more viable for everyone. If you could show that a system like this could pay for itself in say 5 years then every home would want one. Plus for this to be implemented on a large scale requires massive investment that could be decades away. Share the technology and lets get it in homes by next year. Great ted talk. Jon Senior 0 Reply 1 hour ago: I agree 100%. Localised energy production would also make energy consumers more conscious of their consumption and encourage efforts to reduce it. We can invent and invent all we want, but the fast solution to allowing renewable energies to take centre stage is to reduce the base energy draw. With lower baseline consumption, smaller "always on" generators are required to keep the grid operational. Town and house-l

"Through the development of the round one and two wind farms it has become apparent that a disproportionate amount of risk lies within the installation and burial of the power cables. This project will look at the methods and equipment used during the design and specification of installation requirements for export and array cable systems in the offshore wind industry. It aims to reduce risks to the cables during installation and operation, and reduce costs for installation and operation and maintenance activities."

This report analyzes the worldwide markets for Copper in Thousands of Metric Tons. The specific end-use segments discussed are Building and Construction, Electrical and Electronic, Industrial Machinery and Equipment, Transportation, and Consumer and General Products. The report provides separate comprehensive analytics for the US, Canada, Japan, Europe, Asia-Pacific, Latin America. and Rest of World.

China will begin subsidizing the production of wind power turbines, according to an announcement made last Friday. The subsidy will only be available to Chinese majority-owned turbine manufacturers, who will be eligible to receive $88 per kilowatt for the first 50 units capable of generating at least 1.5 megawatts of power. In addition, the subsidy can only be used for research and development. This is the first Chinese subsidy specifically focusing on the wind power industry and it is meant to make Chinese companies more competitive with turbine makers like GE (NYSE: GE) in the U.S., Vestas Wind Systems (VWS.CO) in the Netherlands and India's Suzlon (SUZL.BO).

Thin-film solar company Nanosolar has been sitting on a big secret for much of this year, it turns out: The company took a $300 million financing this March, and has remained mum ever since, only detailing it on the company's blog this morning after VentureWire reported the funding. While Nanosolar hasn't been entirely secretive about its technology, with chief executive Martin Rosencheisen showing off a rapid manufacturing technique early in summer, but apparently it didn't want details leaking on this giant-sized investment until necessary. Word slipped out in April about $50 million of the total, but at the time, Nanosolar didn't want to talk - and it's now clear why. The race for funds, and ever-larger production targets, is definitely on for thin film. Secretive thin-film silicon company Optisolar has raised over $200 million this year, and Nanosolar's thin-film CIGS competitor Miasole is trying to close on a similar amount. And while dozens of other startups are also on the hunt, large companies like Oerlikon Solar and Applied Materials are pouring money into ventures of their own. In many ways, it looks like an overheated sector. But on the other hand, Optisolar's recent deal with PG&E to provide 550 megawatts of electricity suggests that the potential for thin film panels is larger than previously expected, even when considering one analyst firm's prediction earlier this year that the sector will grow at 45 percent annually. That figure could now be much higher, especially for a few big winners - of which Nanosolar will likely be one. The company will be doing some utility-scale projects of its own, Rosencheisen tells us, with experienced partners. It also has a panel built specifically for use by utilities. And one of the backers of this funding, AES Corp., is also one of the world's biggest power companies. At the moment, Nanosolar is still working toward a gigawatt of annual manufacturing capacity, but it will grow be

Following on from its 2008 report on corporate sustainability, the Economist Intelligence Unit has released a major new research report at its 2009 Sustainability Summit, focusing specifically on climate change and what it means for business. The research was sponsored by the Carbon Trust, KPMG, SAP and Shell.

Whatever specific actions governments take, executives indicate that support for innovation should be the overall focus of governments' actions, rather than help for existing industries or companies (Exhibit 6).

Recently I came across a May 2009 presentation published by the US Department of Energy's [DoE] Ames Lab, on a new mixed rare earth-based [MRE-Fe-B] permanent magnet [PM] alloy, for high temperature applications. The work forms part of the DoE's multi-year FreedomCAR project, with a number of specific goals: * Production of magnet materials for PM motors, capable of operating at 150-200 °C [300-390 °F] and for up to 15 years;

"At MAN Trucks & Buses, a 6.8km wiring harness weighing around 160kg in a bus poses an important challenge for the designer."