The ARM Cortex™-M4 processor is the latest embedded processor by ARM specifically developed to address digital signal control markets that demand an efficient, easy-to-use blend of control and signal processing capabilities. The combination of high-efficiency signal processing functionality with the low-power, low cost and ease-of-use benefits of the Cortex-M family of processors is designed to satisfy the emerging category of flexible solutions specifically targeting the motor control, automotive, power management, embedded audio and industrial automation markets. The Cortex-M4 processor features extended single-cycle multiply-accumulate (MAC) instructions, optimized SIMD arithmetic, saturating arithmetic instructions and an optional single precision Floating Point Unit (FPU). These features build upon the innovative technology that characterizes the ARM Cortex-M series processors…

Ever since graphene was first produced in a lab at the University of Manchester in 2004, researchers around the world have been fascinated with its potential in electronics applications. Graphene possessed all the benefits of carbon nanotubes (CNTs), namely its charged-carrier mobility, but it didn’t have any of the down sides, such as CNTs’ need for different processing techniques than silicon and the intrinsic difficulty of creating interconnects for CNTs. But all was not easy for applying graphene to electronics applications. One of the fundamental problems for graphene was its lack of a band gap, which left it with a very low on-off ratio measured at about 10 as compared to in the 100s for silicon. Now this fundamental hurdle has been overcome. Based on research led by Phaedon Avouris at IBM’s IBM T.J. Watson Research Center, Yorktown Heights, New York, IBM is reporting that they have created a significant band gap in graphene.

Not so long ago, artists routinely made their own paints using all sorts of odd ingredients: clay, linseed oil, ground-up insects—whatever worked. It was a crude and rather ad hoc process, but the results were used to create some of the greatest paintings in the world. Today I and other scientists are developing our own special paints. We’re not trying to compete with Vermeer or Gauguin, though. We hope to create masterpieces of a more technical nature: optoelectronic components that will make for better photovoltaic cells, imaging sensors, and optical communications equipment. And we’re not mixing and matching ingredients quite so haphazardly. Instead, we’re using our blossoming understanding of the world of nanomaterials to design the constituents of our paints at the molecular level.

Scientists have great expectations that nanotechnologies will bring them closer to the goal of creating computer systems that can simulate and emulate the brain's abilities for sensation, perception, action, interaction and cognition while rivaling its low power consumption and compact size. DARPA for instance, the U.S. military's research outfit known for projects that are pushing the envelope on what is technologically possible, has a program called SyNAPSE that is trying to develop electronic neuromorphic machine technology that scales to biological levels. Started in late 2008 and funded with $4.9 million, the goal of the initial phase of the SyNAPSE project is to "develop nanometer scale electronic synaptic components capable of adapting the connection strength between two neurons in a manner analogous to that seen in biological systems, as well as, simulate the utility of these synaptic components in core microcircuits that support the overall system architecture."

The potential for the QTC material to transition from an insulator to a conductor (i.e. change its electrical property) is influenced by how much deformation the material is experiencing as a result of the applied mechanical pressure. QTC can be used to produce low profile, low cost, pressure activated switches or sensors that display variable resistance with applied force and return to a quiescent state when the force is removed. The difference between a QTC switch and a QTC sensor is arguably only the speed and amount of physical input required to achieve the required switching point or resistance range.

RoweBots Research, Inc., a supplier of tiny embedded POSIX RTOS products, today announced the launch and release of UnisonTM Version 5 and the open-source version of Unison Version 4. These two ultra-tiny embedded-Linux and POSIX compatible RTOSs open Renesas Technology Corp.’s SH-2A Microcontroller (MCU) family to Linux and POSIX compatible development for the first time.

The aptly-named StickyBot is a gecko-like robot that can climb smooth surfaces using its feet, which are covered in small, dry rubbery hairs (called setae on the gecko) which provide enough surface tension for dry adhesion. While the original StickyBot has 4 toes per foot, the team at Stanford has created the SB2 which has only 2 toes per foot while still retaining its climbing ability.

The marriage of high performance optics with microfluidics could prove the perfect match for making lab-on-a-chip technologies more practical. Microfluidics, the ability to manipulate tiny volumes of liquid, is at the heart of many lab-on-a-chip devices. Such platforms can automatically mix and filter chemicals, making them ideal for disease detection and environmental sensing. The performance of these devices, however, is typically inferior to larger scale laboratory equipment. While lab-on-a-chip systems can deliver and manipulate millions of liquid drops, there is not an equally scalable and efficient way to detect the activity, such as biological reactions, within the drops.

The goal of Long Term Evolution (LTE) is to achieve higher data rates through more efficient transmission, and thus improving the cellular phone user experience by enabling powerful new devices. The changes required in this technology present new challenges for base station vendors and their suppliers. Supporting 4G systems efficiently requires a number of innovations in DSP design; these innovations are moving the industry toward SoC architectures to support such systems. This paper will explore how TI's new architecture enables the key features in 4G systems.

Opus is Octasic's high-performing, ultra low-power, asynchronous DSP technology optimized for basestations, video processing and media gateway solutions. Asynchronous designs deliver similar computing performance to synchronous designs, but use less silicon and less power. No clock tree No state-elements Less sensitive to process and temperature variations

Hardware modifications and gadgets for ZX Spectrum and compatibles

Multisim 11 is the latest version of its circuit simulation software, with specialized editions for both hands-on learning and professional circuit design. The easy-to-use Multisim software delivers a graphical approach that abstracts the complexities of traditional circuit simulation, helping educators, students and engineers employ advanced circuit analysis technology. The academic edition of Multisim 11 incorporates specialized teaching features and is complemented by circuits textbooks and courseware. This integrated system helps educators engage students and reinforce circuit theory with an interactive, hands-on approach to investigating circuit behavior. Multisim 11 Professional helps engineers optimize circuit designs, minimize errors and reduce prototype iterations. When combined with the new NI Ultiboard 11 layout and routing software, Multisim provides engineers a cost-effective, end-to-end prototyping platform. Its integration with NI LabVIEW measurement software also helps engineers define custom analyses to improve design validation…

DSP core licensor Ceva Inc. is due to unveil a software-programmable multimedia video processor architecture at the Mobile World Congress in Barcelona next week. The multicore architecture, called MM3000, which comes complete with C compilers, power management provision and an RTOS/multithreading scheduler is intended to be able to process any and all video codecs up to the highest resolutions and frame rates currently available as well as future codecs for things like 3-D video.

This book is intended for those who work in or provide components for industries that use digital signal processing (DSP). There is a wide variety of industries that utilize this technology. While the engineers who implement applications using DSP must be very familiar with the technology, there are many others who can benefit from a basic knowledge of its' fundamental principals, which is the goal of this book—to provide a basic tutorial on DSP.

Within the next three years, the U.S. military will test the feasibility of sending a quadruped robot out into the field as a trusty pack mule to carry supplies for its troops, wherever they go. If the testing goes well for Boston Dynamics's Legged Squad Support System (LS3), company founder Marc Raibert will have come a long way from the one-legged hopping robots he pioneered in the 1980s. Actually Raibert has already come a long way, to the point where the U.S. Defense Advanced Research Projects Agency's (DARPA) Tactical Technology Office and the U.S. Marine Corps awarded his company a 30-month, $32-million contract last week to deliver a prototype LS3. This would be the first step in fulfilling the military's call for an autonomous, legged robot that can carry up to 181 kilograms of supplies for at least 32 kilometers without refueling.

Using a programmable device to expand the capabilities of an embedded system, designers can reduce power consumption at the same time By Rahul V. Shah and Vishesh Agrawal

At three separate industry events last week, engineers said they are gearing up to deliver in 2011 chips that can handle serial data streams running at 25 Gbits/second to drive next-generation 100 and 400 Gbit/second networks. But they say it's still a mystery how—or if—they can deliver follow-on components for the terabit networks today's Internet data centers are already demanding. The kinds of jobs required to run today's Web 2.0 services such as Google and Facebook can completely overwhelm current 10 Gbit/s Ethernet links in the warehouse-sized data centers those companies use. Such data centers could use hundreds of 100 Gbit/s Ethernet links today, although standards for such networks are still being completed.

In this video we present four types of wall climbing robots that were developed in Dr. Amir Shapiros lab at the Department of Mechanical Engineering of Ben Gurion University of the Negev, Israel. The robots shown are: First, a magnetic climber that has compliant magnetic wheels and is capable to climb on ferromagnetic surfaces. This robot can be used for inspection of ship hull or bridges. Second, is a Snail inspired wall climbing robot capable of climbing on non metallic surfaces using hot melt glue. The robot secretes the adhesive at the front and peels off the track from the wall at the bottom leaving a trail behind just like the snail does. Third, is a robot that uses sticky wheels in order to attach itself to the wall. It simply has 3Ms sticky tape on the wheels. It can climb on smooth surfaces like glass. Fourth, is a four legged wall climbing robot for climbing on rough surfaces. It has 12 claws made of fishing hooks mounted on each footpad, and it climbs like cat or other rodents. For further information email: ashapiro@bgu.ac.il. See also: www.bgu.ac.il/~ashapiro and http://bgurobots.pbworks.com/

Robots mean many things to many people, and National Instruments offers intuitive and productive design tools for everything from designing autonomous vehicles to teaching robotics design principals. The NI LabVIEW graphical programming language makes it easy to program complex robotics applications by providing a high level of abstraction for sensor communication, obstacle avoidance, path planning, kinematics, steering, and more.

On Monday, National Instruments announced one such platform. It's called LabView Robotics. In addition to LabView, the popular data-acquisition application, the package includes a bunch of tools specific to robotics. It can import codes in various formats (C, C++, Matlab, VHDL), offers a library of drivers for a wide variety of sensors and actuators, and has modules for implementation of real-time and embedded hardware. NI says engineers could use the package to both design and run their robotic systems.