Group items tagged

There are severe flaws within the Harmonic-Balance and SPICE programs now widely used. Mentioned as far back as within an abstract of Session WSO at the 2008 IEEE International Microwave Symposium: "Even though nonlinear circuit-analysis software has been in use for many years, users still have difficulty obtaining valid results with existing methods.  Recognized problems include poor accuracy, convergence difficulties, long simulation times, and unstable results (i.e., results that vary greatly with minor changes in parameters).  These problems are encountered in both harmonic-balance and time-domain simulations."

National Instruments has released a vision module for the PXI platform that provides a high-performance parallel processing architecture for hardware-defined timing, control and image pre-processing. The NI 1483 Camera Link adapter module, in combination with an NI FlexRIO field-programmable gate array (FPGA) board, offers a solution for embedding vision and control algorithms directly on FPGAs which are used to process and analyse an image in real time with little to no CPU intervention. The FPGAs can be used to perform operations by pixel, line and region of interest. They can implement many image processing algorithms that are inherently parallel, including fast Fourier transforms (FFTs), thresholding and filtering.

Ozmo Devices, the leading provider of low-power Wi-Fi Personal Area Network (Wi-Fi PAN) solutions, announced today that it started sampling its OZMO2000 chip to select peripheral manufacturers.  This is the first Wi-Fi solution to overcome the battery life, cost and compatibility issues that have limited the broad adoption of Wi-Fi for HID (human interface device) applications.  The OZMO2000 is currently available for use in Wi-Fi mouse, keyboard and remote control designs.  Furthermore, the solution is compatible with all Wi-Fi-enabled notebooks and desktops that are compatible with Windows 7.

In traditional short-haul microwave transmission (that is, line-of-sight microwave transmissions operating in the 18 GHz and 23 GHz radio bands),RF design engineers typically are concerned with signal aspects such as fade margins, signal reflections, multipath signals, and so forth. Like an accountant seeking to balance a financial spreadsheet, an RF design engineer normally creates an RF budget table, expressed in decibels (dB), in order to establish a wireless design. Aspects like transmit power and antenna gain are registered in the assets (or plus) column, and free space attenuation, antenna alignment, and atmospheric losses are noted in the liabilities (or minus) column. The goal is to achieve a positive net signal strength adequate to support the wireless path(s) called for in the design.

The center piece of our toolset is the software integrated development environment or IDE. MPLAB IDE has enjoyed many years of evolution cracking Microchip’s popular catalogue of micro controllers and digital signal controllers. This presentation will cover these topics. Look at MPLAB and its components. An MPLAB IDE overview, MPLAB’s hardware components including starter kits and demonstration and evaluation kits and finally we attempt to answer the question why use Microchip tools.

High Level Synthesis Architectural Optimization Basics In part 1 of this article we introduced basic filter bank theory and used the Synplify DSP High Level Synthesis (HLS) tool to implement an example filter bank into three alternative architectures. In part 2 we dive deeper into these three architectures to better understand how these filters work. We will also examine the HLS optimizations we applied and the resulting benefits. Example Filter Bank Review Before we proceed, let's quickly review our filter bank example. Our example, shown in Figure 1, is a size 16 DFT filter bank. The color scheme shows the sample rate change where a 16 MHz input sample rate (red) has been chosen and the output sample rate is downsampled by 16 (green).

bowl and pairing off to come up with a way to create and commercialise sensors and switches that generate their own power. The idea is that the parts will make external power sources redundant - because they can convert energy from body heat, light and vibrations straight into electricity. Self powered electronics have already sporadically been used in technology like wall-mount remote control units for air conditioners, says Nikkei, but existing parts are bulky and cost a couple thousand yen a piece. 3,000 yen is about $35 - which means they're not the best bet, financially, yet.

Rube Goldberg couldn’t have designed a more elegant confluence of convoluted causal relationships.  Start analyzing the perplexing paradox of the FPGA synthesis market and each link of the chain reveals a bizarre force vector that eventually doubles back onto itself into an unlikely equilibrium that miraculously has held stable for a full decade despite disruptive forces of epic proportions. For over a decade now, Synplify has navigated these waters and has continued to survive and thrive through the unlikeliest of conditions.  Now in the hands of EDA giant Synopsys, the Synplify family of FPGA synthesis tools continues to evolve - with a major upgrade this fall.  When you put a digital design into an FPGA, there are two technologies that determine whether your design fits or doesn’t fit, whether it meets your timing constraints or does not, whether the power consumption will be within your limits (or those of the FPGA), or whether it fails completely, leaving your project at the mercy of major mulligans.   Those two technologies are synthesis and place-and-route. 

Carnegie Mellon has taught its robotic snake to climb trees, though one hopes it won’t start offering your spouse apples. “Uncle Sam” (presumably named for its red, white, and blue markings) is a snake robot built from modular pieces. The latest in a line of ‘modsnakes’ from Carnegie Mellon’s Biorobotics Lab, Uncle Sam can move in a variety of different ways including rolling, wiggling, and side-winding. It can also wrap itself around a pole and climb vertically, which comes in handy when scaling a tree. You have to watch this thing in action. There is something incredibly life-like, and eerie, about the way it scales the tree outdoors and then looks around with its camera ‘eye’. Projects like Uncle Sam show how life-mimicking machines could revolutionize robotics in the near future.

Researchers at CMU and Intel are attempting to map and understand human brain activity well enough that individual words can be detected. Currently, giant MRI machines are being used but the future holds smaller devices that can be worn like a helmet according to Dean Pomerleau, senior researcher at Intel. The efficiency and productivity of word detection will be superior to existing technology that allows an operator to simply control a cursor. This technology will no doubt make its way into robotic telepresence applications including remote surgery and construction in dangerous environments such as the ocean and space.

The embedded world is constantly changing. You might not have noticed, but if you take a minute to recall what a microcontroller system was like 10 years ago and compare it to today's latest microcontroller systems, you will find that PCB design, component packages, level of integration, clock speed, and memory size have all going through several generations of change. One of the hottest topics in this area is when will the last of remaining 8-bit microcontroller users start to move away from legacy architectures and move to modern 32-bit processor architectures like the ARM Cortex-M based microcontroller family. Over the last few years there has been a strong momentum of embedded developers starting the migration to 32-bit microcontrollers and, in this multi-part article, we will take a look at some of the factors accelerating this migration.

The marriage of high performance optics with microfluidics could prove the perfect match for making lab-on-a-chip technologies more practical. Microfluidics, the ability to manipulate tiny volumes of liquid, is at the heart of many lab-on-a-chip devices. Such platforms can automatically mix and filter chemicals, making them ideal for disease detection and environmental sensing. The performance of these devices, however, is typically inferior to larger scale laboratory equipment. While lab-on-a-chip systems can deliver and manipulate millions of liquid drops, there is not an equally scalable and efficient way to detect the activity, such as biological reactions, within the drops.

Not so long ago, artists routinely made their own paints using all sorts of odd ingredients: clay, linseed oil, ground-up insects—whatever worked. It was a crude and rather ad hoc process, but the results were used to create some of the greatest paintings in the world. Today I and other scientists are developing our own special paints. We’re not trying to compete with Vermeer or Gauguin, though. We hope to create masterpieces of a more technical nature: optoelectronic components that will make for better photovoltaic cells, imaging sensors, and optical communications equipment. And we’re not mixing and matching ingredients quite so haphazardly. Instead, we’re using our blossoming understanding of the world of nanomaterials to design the constituents of our paints at the molecular level.

French service robotics company Robosoft has introduced a robot called Kompaï designed to assist elderly and disabled people and others who need special care. The mobile robot talks, understands speech, and can navigate autonomously. It reminds people of meetings, keeps track of shopping lists, plays music, and works as a videoconference system for users to talk with their doctors, for example. The video below is pretty awesome. It shows a senior at Broca Hospital, in Paris, interacting with the robot after receiving only a few minutes of training. The man asks the robot about the time, date, and whether he has any appointments that day; Kompaï gives answers in a computerized voice.

Supporting the Wind River Systems VxWorks operating system on Intel architecture is valuable for customers who would like to preserve their application software and evaluate other architectures for comparison purposes or for architecture conversion. Products from Wind River Systems, particularly VxWorks, offer a great opportunity to address multiple architectures with the same real-time operating system (RTOS). Furthermore, the continuous development and migration of multicore platforms has increased the focus on migrating software to multicore and performance optimizations given a specified software workload and certain hardware resources.