Group items tagged

Ten Tips to Help You with Your Kaizen Continuous Improvement Strategy The Kaizen methodology encourages ongoing efforts to ensure continuous improvement throughout a facility. This improvement can come in many forms including waste elimination, improved efficiency, safer work environments and much more. To simply say that a facility is employing Kaizen strategies, is essentially meaningless if you don't have any concrete action items you are following. Whether you're just getting started or you are looking for ways to reinvigorate a Kaizen strategy that is not effective, the following ten tips will be very helpful. Each one can give you ideas on what you can do encourage improvement and allow that improvement to grow and expand long into the future. Tip #1 - Harness the PDCA Strategy One of the key concepts used in Kaizen is the "Plan-Do-Check-Act" strategy. This is a quality model that can be used when implementing any type of improvement in the facility. As you might expect, the PDCA strategy is a cycle of ongoing improvement that should never end. The steps are as follows: Plan - This step is where you identify an area where improvement is possible and make an initial strategy on what chance should be made to realize the desired improvements. Do - Implement the change, but only on a small scale. This may mean having one department make the change in some situations or for larger corporations, having one facility make the update. During this step it is also very important to be gathering as much data regarding the change so it can be properly evaluated. Check - Review the results of the change including the data that was collected. Looking to see if they had the desired impact or not is critical to know whether you should move forward with rolling the change out to other areas. Act - IF the data in the check step points to a success, it is time to push the change out on a wider scale. Once the change has been successfully implemented you wi

One of the top reasons for digital innovation and transformation failures can be summarized as the enterprise trying to reinvent the wheel. This is the tendency of the enterprise to attempt to create technology, platforms, and applications that have already been implemented, scaled, optimized and almost perfected. This tendency almost always ends up a failed one as it does not create any net new value for the enterprise but comes with a massive opportunity cost as the enterprise spends crucial resources on reinventing the wheel than innovating for the customer. How The Wheel Is Reinvented Nontechnology enterprises can get trapped in a reinvent state where they conclude that homegrown technology is the only path towards customer and business value. This in itself is not entirely false however the type of enterprise and their decision-making process along with the capabilities they have in house have a very large impact on the success of the strategy.eRaaadada Reinventing the wheel happens when a non-tech enterprise discovers a technology trend towards much later in the hype cycle almost towards the end when the technology is hitting the mass market and decides to recreate or reinvent its own version of the technology. This is often done with the assumption that with some investment, the enterprise can have a home grown version of technology or platform that is designed specifically for its needs and is thus a better fit. However, enterprises assume that the state of the technology will remain constant and while they are attempting to home grow a version that can match the current state of the art. In reality, the state of the art shifts and the enterprise is not able to bridge the gap. Who Reinvents The Wheel Typically, technology teams often decide to go down the path of reinvention when they are allowed to make technology upgrade or technology creation decisions without business KPIs and cost constraints i.e. clear success criteria with fixed cost and clear ti

Improving and Implementing Safety Lean Manufacturing Safety Lean ManufacturingWhen people look at facility improvement opportunities they often look at process improvement methodologies, such as Lean Manufacturing. Another thing that is commonly reviewed is facility safety improvements. In many cases, however, they don't see that using lean manufacturing techniques can often also provide safety improvements. Thinking about safety lean manufacturing will allow you to make improvements throughout your facility in a way that will not only reduce waste and increase profitability, but also help improve safety at the same time. The following are five examples of how lean can directly improve safety within your facility. According to DesignSafe's document on, Integrating Safety and Lean Manufacturing Safety must not be viewed as a separate activity that is a non value-added effort with objectives contrary to lean concepts. Elimination of waste can also be interpreted as the elimination or minimization of risk that adversely affects wasted human resources and lost time from injuries. Lean imperatives of faster, better, and cheaper must encompass the issue of running safer as well. Safety Lean Manufacturing - Top 5 ways to Combine Them 1. Eliminate Overproduction to Reduce Unnecessary Interaction with Machines Safety Lean Manufacturing OverproductionOne important focus for lean manufacturing is the elimination of over production. While this is mainly done to help eliminate waste, it will also make for a safer facility because people won't be working on the machines as much. Any interaction with the machine is an opportunity for an accident, so this is a good move for safety too. Look also at the fact that when people are spending more hours working at a machine, they are likely to be more fatigued, which increases the risk for accidents and injuries. 2. Listening to Employees Improvement Ideas One of the trademarks of a good lean manufacturing program is t

Lean Management - A Guide To Starting Out Right Much like anything over-used and spread before those singing praises have done a lot of research, Lean is a concept that sometimes, despite the best of intentions, misses its mark. Lean principles aren't particularly tricky, but with many offshoots and brands of the ideology, it can be easy for new Lean managers to get caught up in misinformation. At its core, lean is about eliminating all kinds of waste from your business. It sounds simple enough, but one of the biggest problems for many newbies is changing your concept of just what "waste" is. Once you've got a grasp on that, you need to move onto individual strategies that can help you eliminate that waste. In this article, we're going to go over how to accomplish both of these tasks as a manager who may be new to Lean by exploring unique facets of this management type and how they interact with elements of your business. One of the largest differences between Lean management and traditional styles of management is that in a traditional methodology your primary (and nearly sole) concern is the end of the line result. While Lean is of course concerned with achieving superior end results, its focus is on the processes that get you there. In this sense, what you learn and practice as a Lean manager is more about making individual pieces work together efficiently than having a tunnel-vision focus on numbers and figures at the end of the cycle. The Relationship Between Lean management, Waste Elimination, and Continual Improvement "If someone tells you that "lean management is this" and not something else, if someone puts it in a box and ties a bow around it and presents it in a neat package with four walls around it, then that someone knows not of what they speak. Why? Because it is in motion and not a framed picture hanging on the wall. It is a melody, a rhythm, and not a single note." - Lawrence M. Miller, Management Meditations While perhap

Lean Six Sigma for Non Profits We always like to hear about people applying business methodologies and mechanics in arguably unorthodox ways or markets, and today I stumbled across a LinkedIn discussion that happens to exemplify exactly that sentiment. User William Falquero seemed to be onto something interesting as he posed a question for other professionals: Could non-profit organizations benefit from Lean Six Sigma thinking? If so, how would they be implemented, what would the challenges of this sort of endeavor be? Only a few users jumped in right off the bat, but, lucky for our purposes today, they were some critical thinkers with some useful insight and examples to offer up. Today, we're going to take an in-depth look at the use of Lean and Six Sigma thinking and tools within non-profit and charity organizations. Are Charities Good Candidates for Lean? One of the first and most important things to establish when considering implementation of Lean in any company or organization is to figure out how they could benefit from the systems. In the case of charities, one user points out that room for improvement from Lean is readily apparent simply in the mindsets of the people who work at them: "The sweat and tears the non-profit workers and volunteers shed and the effort they put forward is focused on those they serve, with less thought on HOW they are served" This is what Richard Petty had to say of an organization he actually had the experience of implementing Six Sigma with. One thing he goes on to highlight and elaborate on is the fact that many volunteers and non-profit workers are so focused on those they want to help that they may get blinded as to the mechanisms that can take them there (and these are the places opportunities for improvement present themselves). Even in other more traditional workplaces, we see this sort of "tunnel vision" as fairly common: It can be hard to get workers to take a step back from the endgame results they're

Find out how it is possible to get 100% in commissions with this company. Where entire business is simplified down to three steps, anyone can do ....and only take a few minutes a day to do.. It will deposit 100% commissions into your bank account ...daily. Yes... Your bank account. 100% commissions. Daily. Get commission notifications sent directly to your email inbox, over and over again, because... for the first time ever - you will be making money. Check it out here: http://empowernetwork.com/almostasecret.php?id=Romualda And then get started here: https://www.empowernetwork.com/join.php?id=Romualda

Waste water treatment plants are usually operated by municipalities or private utility companies, and are regulated by the states wherein they reside, but their standards were enacted by the U.S. Environmental Protection Agency (EPA). According to the Safe Drinking Water Act of 1974 (amended in 1986 and 1996), all local treatment systems are regulated so that the water they treat is tested for contamination, their improvement plans are reviewed, they have onsite inspection to ensure that machinery and sanitation efforts are functioning properly, that personnel are properly trained, and that they comply with all standards (or face stiff penalties). On top of these regulations are safety expectations imposed by the Occupational Health and Safety Administration (OSHA) under the U.S. Department of Labor. Waste water treatment plants have so many potentially hazardous areas that can impact people, directly and indirectly. Who is Affected? Directly, employees at the plant run the risk of workplace injuries from working around the huge pumps, walking near and above open water treatment containment tanks, agitator pools, furnaces, pipes, and various other facility obstacles, machinery and equipment which can create pitfalls for unsuspecting workers. Indirectly, end users of the treated water run the risk of drinking and using improperly treated water, but this post is primarily concerned with the safety of workers and visitors to the treatment plant. Ways to Make It Safe Pump pipe marking label image from wikipedia Workers who must work near open vats of raw sewage or even treated water should have all opportunities for falling into the water prevented via various safety devices, warning signs, or precautions. Potentially hazardous holding tanks or agitators should have traction tape laid on walkways or catwalks to reduce slipping. All pipes should be clearly marked with pipe marking labels to display what the contents of the pipes are. Any electric panels should b

The Adventure of Reducing Risks and Hazards in the Workplace Whenever starting a new job, it can be difficult to figure out exactly what you should be doing, and how it needs to be done. When I started working at a new facility as a safety manager, I began my first day with a meeting with the facility manager. The meeting was set up so he could tell me what was expected of me in my new role, and provide other details of the job. I was quite surprised when the meeting took less than two minutes, and the only objective I was given was to 'reduce risks and hazards in the workplace.' I asked for some clarification or guidance in what exactly he was looking for, but he simply said that I was hired to improve safety, and he was leaving the task of finding out how to do it in my hands. He gave me a sheet of paper with some information about what resources I had available, including my annual safety budget and told me to get to work right away. I should point out there that I had several years experience as a safety manager at a large company, which is why I was brought in to this new facility. The facility had recently been cited by OSHA for a variety of safety hazards, and there were even some fairly severe injuries that occurred in the previous months. The facility owners made it clear that safety was a priority for them, and they were willing to do whatever it took to pass inspections, and keep the employees safe. Planning My Safety Program While that initial meeting was unique, to say the least, I was also quite excited about the opportunity. It is quite rare that a safety manager is given such flexibility, and I wanted to make sure the manager wouldn't regret that decision. I got to work right away planning my safety improvement program. OSHA Safety Sign Guide I wanted to make some quick changes to help improve safety in the short term, and then also plan out ways to create a culture change within the facility so everyone would be more safety focused. I kne

Transforming into a tech company has become top of mind for executives in all major industries. It is clear that modern technology will fundamentally alter what and how business is done in every domain, sector, and industry. This has led to a call to arms in every enterprise to understand how they can transform into a tech company. The Tech Company Magic Tech companies have fine-tuned the art of bring new digital products and services to the market, quickly, efficiently and effectively and understanding customer feedback to iterate and improve. This capability makes them incredibly agile and leads to faster experimentation that is cheaper and involves less risk. In turn, this enables them to bring new capabilities to the market and even if all do not succeed or get traction, a few do and that drives innovation, customer satisfaction, and growth. From the outside, tech companies appear to be massive juggernauts that are unstoppable and able to crush everything in their path. The 'Non-Tech' Technology has been leveraged in every sector and industry, however, it has almost always been treated as a means to an end, something that is required but never the real value driver for the customer. This has led to the typical organizational structure in enterprises into "Business", "Operations" and "Information Technology". The "Business" arm generates value for customers, the "Operations" team carries out the requirements of the Business team and the "Information Technology" team provides the systems (databases, network and compute) required to "keep the lights on" for the Operations and Business Teams" This structure served enterprises well in the last decades as customers did not have an alternative to directly working with the enterprise and this fortified the value supply chain and also established a hierarchy of sorts within the enterprise where the business looked down upon operations who looked down upon technology. The purpose of

Modern, RESTful APIs are not considered standard, table stakes and expected out of any new project, effort, application, system, service or product. It has become so normal to talk about developer interfaces, developer adoption, application development and innovation in the same breath as APIs that a distinct effort to build APIs for a new product or service seems out of place and abnormal. APIs are the defacto standard of app development. So where do we go from here? We believe that APIs are about to enter the second growth spurt. APIs will evolve from not just interfaces and integration enablers into the rockets that propel enterprises towards innovation and market dominance. Here are three key trajectories that will lead the next API evolution and revolution. Innovation - Starts, and Ends with APIs All modern technologies such as Artificial Intelligence, Machine Learning, ChatBots, Analytics, BlockChain etc. begin and end their stories with APIs. APIs are what enables the communication between front-end user interfaces and the backend technology services. All new machine learning capabilities offered out of the big four tech companies have seen the light of day through APIs. Intent & Sentiment extraction, Topics, Categories, Summarization, Image Recognition, Entity Extraction etc. are all capabilities powered by Machine Learning, Natural Language Processing that is ultimately being delivered as APIs to application developers. Similarly, ChatBots are typically designed to get the user entered text, use an intent API to determine intent and then use a service API to respond to the user conversationally or with a service. Clouds - Multi-Cloud, Hybrid Cloud As the big three cloud providers grow their market share and attempt to attract attention, increasingly, enterprises need to think about how they minimize their risk by building in the flexibility to switch their cloud provider if and when they need. In addition, hybrid architectures or a cloud migration

Almost every workplace is prone to hazards. Be it from falling objects, falls, skids or opens electric wires, there are dangers everywhere. According to statistics there are immense injuries and even deaths resulting from work related hazards. Organizations often lose a lot in terms of compensation and lost human resource opportunities. There is no telling when an accident can occur but the good news is that most of these hazards can be minimized through the use of line marking tapes and floor tapes. Safety in the construction site Construction sites top the list of the most hazard prone areas. With so much going on safety standards might fail to be strictly adhered to and this can expose the workers and passersby to great risks. It is hence crucial that they maybe adequately informed of the areas to avoid. Line marking tapes can be used to forewarn any passersby to exercise caution when approaching a certain site. Floor tapes can be used to indicate the safest pathways to use so as to avoid falling objects or other dangers characteristic of a construction site. If it is a renovation project being carried out in the office temporary line marking tapes can be utilized to warn the occupants of the potential hazards. They can also be used to redirect people towards am alternative entrance or exit. Warning people of danger zones Various colors of line marking tapes portray different messages. In the workplace, there is a need to warn people of the existing dangers. In the industrial organizations where there is possible exposure to hazardous materials if it important to erect permanent measures to ensure that all those concerned are adequately aware of the danger lurking within. Relevant floor tapes can be used to reflect danger. A tank that contains oil products should be conspicuously marked to warn any persons within the organization to avoid bringing flammable objects near the site. Warning tapes should also be applied in areas close to the chemical labs and pi

Do you know, there are more apps like Instagram - socially interactive & collaborative? The opportunity to connect with millions of people by signing up at some social platform was once a DREAM! YouTube managers earn a lot of money by using YouTube as a marketplace. Similarly, Instagram is a fantastic platform for uploading, editing, and sharing photos and reels.

Angular vs. React With the massive rise in technology and platforms, we're astonished to see how developers are scaling up their skillset and creating remarkable technology impact overall. Angular and React are both famous java script frameworks used to develop the front end of the website and make it a perfect opportunity for visitors.

Keeping your dog warm during winter is not just about practicality but also an opportunity to showcase their unique style. Fashionable winter coats offer a perfect combination of functionality and fashion, ensuring your furry friend stays warm and looks fabulous. By choosing the right coat, prioritizing comfort and fit, and caring for it properly, you can keep your dog cosy and stylish throughout the winter season. So, gear up your furry companion and embrace the chilly weather with confidence and flair!

Winter is a season full of wonderful weather and exciting opportunities for outdoor adventures with your beloved canine companion. However, as the temperatures drop, it is important to make your dog's warmth and comfort a priority to ensure their well-being during these chilly winters. Choosing the right winter jacket for your furry friend is key to keeping them comfortable and protected from the elements. In this blog, We will go into an in-depth discussion of the factors to consider when choosing a winter jacket for dogs, so you can make an informed decision and go on an unforgettable winter adventure together.

Gone are the days when people were marketing their services and products through newsletters and pamphlets. Now, everyone wants to go digital to create better opportunities and earn more.

Whenever we're claiming something, it's our utmost job to give top-notch quality. Otherwise, we're missing out on a tremendous opportunity. Client-focused, customer-centric web development services help us to better connect with the audience. And convince them to purchase the services from us.

Bringing home a puppy is a wonderful and enjoyable experience. During his first year, your new furry friend will grow and learn a lot, and you will be there to support him at every opportunity. Every month, This article will guide you through the first twelve months, giving you tips and advice on what to expect and how to care for your new puppy. We'll cover everything from food and training to the importance of pet accessories like dog harnesses. let's get started!