Group items tagged

The Yukon Environmental and Socio-Economic Assessment Board (YESAB) has recommended that the controversial Carmacks copper mine project can go ahead, providing that the Western Copper Corporation (TSX: WRN) complies with 148 conditions to mitigate potential adverse impacts. The tiny community of Carmacks with a year-round population of 500 is still considered an important service center for mining and for transportation, a century after it was a popular rest stop for the Yukon gold rush. However, members of the Little Salmon Carmacks First Nation want Western Copper to negotiate a better environmental engineering solution as part of an Impacts Benefits Agreement with the community. Located 38km northwest of the Village of Carmacks and 192 km north of Whitehorse in the Yukon Territory, the Carmacks copper project is planned to be an open-pit operation that will yield about 14,000 tonnes of copper cathode annually. Western Copper has targeted production to begin during the fourth quarter of 2010. Among the comments and concerns raised with the YESAB were routing of mining-related traffic, the heap leach detoxification process, sludge management, heap leach liner performance, and the estimates of closure costs. Among the comments and concerns raised with the YESAB were routing of mining-related traffic, the heap leach detoxification process, sludge management, heap leach liner performance, and the estimates of closure costs. The YESAB Executive Committee said it was satisfied that: Western Copper adequately consulted with the First Nations in whose territory, and the residents of any community in which the project will be located or might have significant or socio-economic effects; The project proponent provided sufficient information in the project proposal to allow for the assessment of potentially significant effects; Significant adverse environmental or socio-economic project and cumulative effects identified within the scope of the scre

Aurubis issued redundancy notices to 177 employees and began relocating rolling equipment to its facilities in Zutphen, Netherlands and Buffalo, USA. Aurubis took ownership of the facility from Luvata in September 2011 when it acquired Luvata's rolled products division. However, structural overcapacity due to longterm declining demand in the European copper strip for engine cooling segment led to the operation generating losses in the past few years. In an earlier announcement on Aurubis' website, the company said that production at Finspång would be gradually reduced from mid-2013 with the company expecting to finalise the closure in late 2013.

ICMM is pleased to announce the formal launch of the Spanish language version of its Planning for Integrated Mine Closure: Toolkit at the 29th mining convention PerúMin, in Arequipa, Peru.

Superior Essex has announced it is to close its magnet wire plant in Chauny, France at a cost of €12 million ($18.8 million). The plant, which dates back to 1922, was bought by Superior last year and operates under the company's Essex SAS subsidiary. The closure of the plant will bring production capacity in line with demand the company said. Just under $16 million of the charges related to the closure is for employee severance costs with the rest for equipment relocation and disposal. A review of the plant began three months ago before the sale of Superior Essex to LS Cable was agreed. Meanwhile LS Cable said its first half operating profit increased by over 50% with the Middle East and China leading global demand through the development of utilities and phone lines to meet power needs and internet usage. The chief executive of LS Cable, Christopher Koo, said orders from the Middle East are likely to increase by 80% this year to $450 million. Mr Koo said he expects global cable demand to increase by 4% a year to 2011, with China increasing by 8% annually.

The planned coal-fired project with two units of 660MW each would be set up with an estimated capital outlay of Rs 6,600 crore, sources said. The plant is expected to be operational within four years from the date of financial closure, a company official said.

ICSG 1 Feb 09 - Based on existing facilities and announced project developments, annual mine production capacity in the period 2009-2013 is expected to grow at an average rate of around 4.3% per year (%/yr) to reach 23.1 Mt in 2013, an increase of around 3.6 Mt (19%) from that in 2009. Of the total increase, copper in concentrate capacity is expected to increase by 2.7Mt (4.3%/yr) to reach 17.9 Mt and solvent extraction-electrowinning (SX-EW) production by 820,000t (4.4%/yr) to reach 5.2 Mt. Most of the new mine projects and expansions are located in Brazil, Chile, Congo, Mongolia, Peru, the United States and Zambia, which together account for around 2.6 Mt (73%) of the projected mine capacity increase during this period. Annual smelter capacity is projected to grow by an average of 2.6%/yr to reach 20.2 Mt in 2013, an increase of 2 Mt (11%) from that in 2009. Asia will be the leading contributor to growth (1.8 Mt), with expansions and new projects expected mostly in China, but also in India, Indonesia and Iran. Africa is the second leading contributor owing to developments in Zambia. North American smelting capacity will fall by 12% (250kt) due to closures of plants in Canada. The ICSG tabulations indicate that world refinery capacity will reach 26.6 Mt in 2013, an increase of 3.2 Mt (13%) from that in 2009. About 2.3 Mt of the expansion is expected to come from electrolytic refineries and 820,000t from electrowinning capacity. Electrolytic refinery capacity growth is projected to average 3.1%/yr, exceeding the projected growth in smelter capacity, and electrowinning capacity growth (at the refinery level) is expected to average 4.3%/yr. About one half (1.5 Mt) of the world refinery capacity increase during this period is expected to come from electrolytic refineries in China; about 25% (830,000 t) from electrolytic capacity increases in India, Indonesia and Iran; and about 20% (600,000 t) from electrowinning capacity increases in Congo, Peru and Zambia.

Wieland-Werke AG, the German fabricator of brass mill products, reported sales of 475,000t, down by 0.4% y-o-y in financial year 2010/2011. Turnover increased by 24% y-o-y to reach €3,287M and profits also rose to €45M in 2010/2011 after a loss of €6M in the previous year. The rise in turnover was mainly attributed to rising metals prices, while the company said that the increase in profits was caused by a product mix composed of a larger amount of value-added products. Wieland noted strong demand in the first six months of the period, which was offset by the Euro debt-crisis as a driver of significantly weaker demand in Europe during the latter half of the fiscal year. In addition, the company saw a fall in demand in Asia from Spring 2011 and continued very low demand in North America. End-use consumer demand was weak and impacted the electronics and electrical engineering sectors as well as vehicle production. Mechanical engineering was considered to be a bright spot in fiscal year 2010/2011.

Wieland-Werke AG, the German fabricator of brass mill products, stated that demand in 2012 began weakly. After January, orders rose only slightly, but demand from important markets in Asia and Europe declined, principally attributed to cautious buying as fears remained over the impact of the course of the euro debt crisis in 2012. In addition, the company is experiencing reduced demand from the electronics industry in Asia following the closure of several plants affected by the tsunami in Japan and flooding in Thailand. Wieland has also not seen any growth support from North America and is uncertain about the global outlook for demand in 2012 due to the unpredictability of the euro debt crisis.

Furukawa Electric announced that it will commission a new electrolytic copper foil factory, located in Taiwan, two months ahead of schedule, in July 2012. The facility is designed to produce copper foil suitable for the manufacture of lithium ion batteries. Furukawa decided to offshore the foil production capacity last year because the appreciated yen had been limiting its competitiveness in supplying the high growth automotive lithium-ion battery market in Taiwan. The company expects to halve its electricity costs in Taiwan, which represent 30% of the total cost of electrolytic foil production in Japan. Furthermore, it is feared that these costs in Japan are likely to escalate with the ongoing strain on power generation and transmission suppliers. This was caused by the continuing temporary closure of nuclear power facilities as it reviews its position on the use of nuclear power generation.

Delphi, the wiring harness manufacturer, plans to shut down its Czech unit. The plant is located at Ceska Lipa, 90 km north of Prague, and serves auto makers such as BMW and Audi. The job cuts will take place in stages until the closure will be completed by the end of May 2011. As a result, all 1,400 employees will be affected. The trade union commented that the company plans to relocate to lower cost places. The Czech Republic has attracted foreign investment related to the automotive industry; however, due to rising costs, some companies decided to relocate.

Wolverine Tube, the Huntsville, Alabama based brass and copper tube manufacturer, reported a net loss of US$3.2m in Q2 2008, down from US$13.3m in the same period last year. Net sales were US$245.5m an 18% decrease y-o-y, with total volume of shipments down 30% to 46.5m lbs. Wolverine said, "The comparative decrease in shipments was due primarily to the company's withdrawl from the domestic wholesale plumbing tube business and closure of its Decatur, Alabama facility in late 2007." The gross margin was 3.2%, down from 5.1% a year earlier owing to lower production and shipping volumes, a result of the downturn in demand from the residential housing market.

Key issues for 2020: supply disruptions, water shortages - less complex concentrates - smelter closures - industry consolidation - range-bound market - tight markets for scrap and blister - depressed acid prices.