Group items tagged

Because pure hydrogen does not occur naturally, it takes energy to manufacture it. There are different ways to manufacture it, such as, electrolysis and steam-methane reforming process.

In electrolysis, electricity is run through water to separate the hydrogen and oxygen atoms. This method can be used by using wind, solar, geothermal, hydro, fossil fuels, biomass, and many other resources.

The more natural methods of making electricity (wind, solar, hydro, geothermal, biomass), rather than fossil fuels, would be better used as to continue the environment-friendly process of the fuel. Obtaining hydrogen from this process is being studied as a viable way to produce it domestically at a low cost. Steam-methane reforming process extracts the hydrogen from methane. However, this reaction causes a side production of carbon dioxide and carbon monoxide which are greenhouse gases and contribute to global warming.

Power density: Power from a solar array is limited by the size of the vehicle and area that can be exposed to sunlight. While energy can be accumulated in batteries to lower peak demand on the array and provide operation in sunless conditions, the battery adds weight and cost to the vehicle. The power limit can be mitigated by use of conventional electric cars supplied by solar (or other) power, recharging from the electrical grid.

By the time it reaches Earth's surface, the energy in sunlight has fallen to about 1,000 watts per square meter at noon on a cloudless day. Averaged over the entire surface of the planet, 24 hours per day for a year, each square meter collects the approximate energy equivalent of almost a barrel of oil each year, or 4.2 kilowatt-hours of energy every day. Deserts, with very dry air and little cloud cover, receive the most sun—more than six kilowatt-hours per day per square meter. Northern climates, such as Boston, get closer to 3.6 kilowatt-hours. Sunlight varies by season as well, with some areas receiving very little sunshine in the winter. Seattle in December, for example, gets only about 0.7 kilowatt-hours per day. It should also be noted that these figures represent the maximum available solar energy that can be captured and used, but solar collectors capture only a portion of this, depending on their efficiency. For example, a one square meter solar electric panel with an efficiency of 15 percent would produce about one kilowatt-hour of electricity per day in Arizona.

Thirty-eight nationally recognized companies in the United States, including eleven Fortune 500 corporations, are collectively saving millions of dollars in electricity costs while reducing carbon emissions by tens of thousands of tons per year by using fuel cells, according to a new report by Fuel Cells 2000, a non-profit education and outreach organization. 

It is popular because it is abundant and provides many communities with a clean, local source of electricity

wind power could account for 20 percent of the nation’s electricity supply by 2030

two main problems. First, the wind does not blow all the time, so there must be backup power plants

Hydrogen Energy Hydrogen is the simplest element. An atom of hydrogen consists of only one proton and one electron. It's also the most plentiful element in the universe. Despite its simplicity and abundance, hydrogen doesn't occur naturally as a gas on the Earth - it's always combined with other elements. Water, for example, is a combination of hydrogen and oxygen (H2O).

Hydrogen Energy Hydrogen is the simplest element. An atom of hydrogen consists of only one proton and one electron. It's also the most plentiful element in the universe. Despite its simplicity and abundance, hydrogen doesn't occur naturally as a gas on the Earth - it's always combined with other elements. Water, for example, is a combination of hydrogen and oxygen (H2O). Hy

Hydrogen is also found in many organic compounds, notably the hydrocarbons that make up many of our fuels, such as gasoline, natural gas, methanol, and propane.

Wind power in the United States is a branch of the energy industry, expanding quickly over the last several years. Construction of new wind power generation capacity in the fourth quarter of 2012 totaled 8,380 megawatts (MW) bringing the cumulative installed capacity to 60,007 MW.[1] This capacity is exceeded only by China.[2] For the 12 months until July 2013, the electricity produced from wind power in the United States amounted to 157.8 terawatt-hours, or 3.91% of all generated electrical energy.[3]

The advantage of AC for distributing power over a distance is due to the ease of changing voltages using a transformer. Available power is the product of current × voltage at the load. For a given amount of powe

Solar Cells or photovoltaic cells convert sunlight directly into electricity. When energy from the sun comes in contact with the cell, electrons in the two different semiconductors absorb the energy and use it to move around, creating an electrical current.

The dirty secret of clean energy is that while generating it is getting easier, moving it to market is not.

While the United States today gets barely 1 percent of its electricity from wind turbines, many experts are starting to think that figure could hit 20 percent.

Achieving that would require moving large amounts of power over long distances, from the windy, lightly populated plains in the middle of the country to the coasts where many people live.

Advantages by Application Telecoms CHP Fuel Cell Generators Electric Vehicles - APU's and Range Extenders Fuel Cell Forklifts Marine Power Portable Power

Energy Is the Ability To Do Work Energy comes in different forms: Heat (thermal) Light (radiant) Motion (kinetic) Electrical Chemical Nuclear energy Gravitational

Renewable Energy Renewable energy sources include: Solar energy from the sun, which can be turned into electricity and heat Wind Geothermal energy from heat inside the Earth Biomass from plants, which includes firewood from trees, ethanol from corn, and biodiesel from vegetable oil Hydropower from hydroturbines at a dam

Applications These wind turbines near Lamar, Colorado, are part of the 162-MW Colorado Green Wind Farm. Each turbine produces 1.5 megawatts of electricity. Wind turbines can be used as stand-alone applications, or they can be connected to a utility power grid or even combined with a photovoltaic (solar cell) system. For utility-scale (megawatt-sized) sources of wind energy, a large number of wind turbines are usually built close together to form a wind plant. Several electricity providers today use wind plants to supply power to their customers.

Big cities need large amounts of electricity to function. Often, this is transported from generating sites located in remote areas hundreds or even thousands of kilometers away. The question is how to move as much electricity as possible from renewable generation sites like hydro plants and wind parks without impairing the function of the power networks that need it.

One of the challenges of renewable power generation like wind and solar power is that it can be interrupted, and this variability affects the stability of the power produced

The "smart grid" will create a power network that is more reliable, flexible, secure and efficient

Estimates of the electricity generating potential of geothermal energy vary from 35 to 2,000 GW.[2] Current worldwide installed capacity is 10,715 megawatts (MW), with the largest capacity in the United States (3,086 MW),[3] Philippines, and Indonesia.

According to the government, geothermal has the potential to supply the United States with 20% of our electricity needs.

The capital cost of geothermal development is expensive, however; 2/3rds are drilling costs. Yet as we overcome some of these technology challenges and make the process more standardized it is believed that geothermal can supply up to 20% of the United States electricity needs by 2050. But innovation and investment in initial steps need to happen now.

Solar energy, radiant light and heat from the sun

radiant light and heat from the sun,

The Life-cycle greenhouse-gas emissions of solar power are in the range of 22 to 46  g/kWh depending on if solar thermal or solar PV is being analyzed, respectively. With this potentially being decreased to 15 g/kWh in the future.[71] For comparison (of weighted averages), a combined cycle gas-fired power plant emits some 400-599 g/kWh,