Skip to main content

Home/ Larvata/ Group items tagged private

Rss Feed Group items tagged

Filter: All | Bookmarks | Topics Simple Middle
張 旭

What Is Amazon VPC? - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...VPC_Introduction.html

aws networking

shared by 張 旭 on 31 Jul 18 - No Cached
  • to allow an instance in your VPC to initiate outbound connections to the internet but prevent unsolicited inbound connections from the internet, you can use a network address translation (NAT) device for IPv4 traffic
  • A NAT device has an Elastic IP address and is connected to the internet through an internet gateway.
  • By default, each instance that you launch into a nondefault subnet has a private IPv4 address, but no public IPv4 address, unless you specifically assign one at launch, or you modify the subnet's public IP address attribute.
  • ...11 more annotations...
  • Amazon VPC is the networking layer for Amazon EC2.
  • A virtual private cloud (VPC) is a virtual network dedicated to your AWS account. It is logically isolated from other virtual networks in the AWS Cloud.
  • Instances can connect to the internet over IPv6 through an internet gateway
  • IPv6 traffic is separate from IPv4 traffic; your route tables must include separate routes for IPv6 traffic.
  • You can optionally connect your VPC to your own corporate data center using an IPsec AWS managed VPN connection, making the AWS Cloud an extension of your data center.
  • A VPN connection consists of a virtual private gateway attached to your VPC and a customer gateway located in your data center.
  • A virtual private gateway is the VPN concentrator on the Amazon side of the VPN connection. A customer gateway is a physical device or software appliance on your side of the VPN connection.
  • AWS PrivateLink is a highly available, scalable technology that enables you to privately connect your VPC to supported AWS services, services hosted by other AWS accounts (VPC endpoint services)
  • Traffic between your VPC and the service does not leave the Amazon network
  • To use AWS PrivateLink, create an interface VPC endpoint for a service in your VPC. This creates an elastic network interface in your subnet with a private IP address that serves as an entry point for traffic destined to the service.
  • create your own AWS PrivateLink-powered service (endpoint service) and enable other AWS customers to access your service.
張 旭

Outbound connections in Azure | Microsoft Docs - 0 views

docs.microsoft.com/...-balancer-outbound-connections

microsoft azure networking network

shared by 張 旭 on 15 Jul 19 - No Cached
  • When an instance initiates an outbound flow to a destination in the public IP address space, Azure dynamically maps the private IP address to a public IP address.
  • After this mapping is created, return traffic for this outbound originated flow can also reach the private IP address where the flow originated.
  • Azure uses source network address translation (SNAT) to perform this function
  • ...22 more annotations...
  • When multiple private IP addresses are masquerading behind a single public IP address, Azure uses port address translation (PAT) to masquerade private IP addresses.
  • If you want outbound connectivity when working with Standard SKUs, you must explicitly define it either with Standard Public IP addresses or Standard public Load Balancer.
  • the VM is part of a public Load Balancer backend pool. The VM does not have a public IP address assigned to it.
  • The Load Balancer resource must be configured with a load balancer rule to create a link between the public IP frontend with the backend pool.
  • VM has an Instance Level Public IP (ILPIP) assigned to it. As far as outbound connections are concerned, it doesn't matter whether the VM is load balanced or not.
  • When an ILPIP is used, the VM uses the ILPIP for all outbound flows.
  • A public IP assigned to a VM is a 1:1 relationship (rather than 1: many) and implemented as a stateless 1:1 NAT.
  • Port masquerading (PAT) is not used, and the VM has all ephemeral ports available for use.
  • When the load-balanced VM creates an outbound flow, Azure translates the private source IP address of the outbound flow to the public IP address of the public Load Balancer frontend.
  • Azure uses SNAT to perform this function. Azure also uses PAT to masquerade multiple private IP addresses behind a public IP address.
  • Ephemeral ports of the load balancer's public IP address frontend are used to distinguish individual flows originated by the VM.
  • When multiple public IP addresses are associated with Load Balancer Basic, any of these public IP addresses are a candidate for outbound flows, and one is selected at random.
  • the VM is not part of a public Load Balancer pool (and not part of an internal Standard Load Balancer pool) and does not have an ILPIP address assigned to it.
  • The public IP address used for this outbound flow is not configurable and does not count against the subscription's public IP resource limit.
  • Do not use this scenario for whitelisting IP addresses.
  • This public IP address does not belong to you and cannot be reserved.
  • Standard Load Balancer uses all candidates for outbound flows at the same time when multiple (public) IP frontends is present.
  • Load Balancer Basic chooses a single frontend to be used for outbound flows when multiple (public) IP frontends are candidates for outbound flows.
  • the disableOutboundSnat option defaults to false and signifies that this rule programs outbound SNAT for the associated VMs in the backend pool of the load balancing rule.
  • Port masquerading SNAT (PAT)
  • Ephemeral port preallocation for port masquerading SNAT (PAT)
  • determine the public source IP address of an outbound connection.
張 旭

What is a CSR (Certificate Signing Request)? - 0 views

www.sslshopper.com/rtificate-signing-request.html

security https ssl

shared by 張 旭 on 19 Jan 19 - No Cached
  • usually generated on the server where the certificate will be installed and contains information that will be included in the certificate such as the organization name, common name (domain name), locality, and country.
  • A private key is usually created at the same time that you create the CSR, making a key pair.
  • CSR or Certificate Signing request is a block of encoded text that is given to a Certificate Authority when applying for an SSL Certificate
  • ...6 more annotations...
  • A certificate authority will use a CSR to create your SSL certificate, but it does not need your private key.
  • The certificate created with a particular CSR will only work with the private key that was generated with it.
  • Most CSRs are created in the Base-64 encoded PEM format.
  • generate a CSR and private key on the server that the certificate will be used on.
  • openssl req -in server.csr -noout -text
  • The bit-length of a CSR and private key pair determine how easily the key can be cracked using brute force methods.
crazylion lee

vuvuzela/vuvuzela: Private messaging system that hides metadata - 0 views

github.com/vuvuzela

private messaging system metadata

shared by crazylion lee on 06 Jan 17 - No Cached
  • crazylion lee on 06 Jan 17
     
    "Private messaging system that hides metadata https://vuvuzela.io"
張 旭

certificate - What is a Pem file and how does it differ from other OpenSSL Generated Ke... - 0 views

serverfault.com/...her-openssl-generated-key-file

https security server apache nginx system

shared by 張 旭 on 22 Feb 17 - No Cached
  • Certificate Signing Request.
  • Some applications can generate these for submission to certificate-authorities
  • These get signed by the CA and a certificate is returned
  • ...15 more annotations...
  • The returned certificate is the public certificate (which includes the public key but not the private key), which itself can be in a couple of formats.
  • this is a container format that may include just the public certificate (such as with Apache installs, and CA certificate files /etc/ssl/certs), or may include an entire certificate chain including public key, private key, and root certificates
  • Privacy Enhanced Mail (PEM), a failed method for secure email but the container format it used lives on
  • This is a PEM formatted file containing just the private-key of a specific certificate and is merely a conventional name and not a standardized one.
  • The rights on these files are very important
  • /etc/ssl/private
  • OpenSSL can convert these to .pem
  • .cert .cer .crt A .pem (or rarely .der) formatted file with a different extension
  • there are four different ways to present certificates and their components
  • used preferentially by open-source software
  • It can have a variety of extensions (.pem, .key, .cer, .cert, more)
  • The parent format of PEM
  • a binary version of the base64-encoded PEM file.
  • PEM on it's own isn't a certificate, it's just a way of encoding data
  • X.509 certificates are one type of data that is commonly encoded using PEM.
張 旭

NAT Gateways - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...vpc-nat-gateway.html

aws networking system amazon cloud

shared by 張 旭 on 10 Jul 18 - No Cached
  • a network address translation (NAT) gateway to enable instances in a private subnet to connect to the internet or other AWS services
  • but prevent the internet from initiating a connection with those instances
  • NAT gateways are not supported for IPv6 traffic
  • ...11 more annotations...
  • must specify the public subnet in which the NAT gateway should reside
  • update the route table associated with one or more of your private subnets to point Internet-bound traffic to the NAT gateway.
  • NAT gateway is created in a specific Availability Zone and implemented with redundancy in that zone.
  • ensure that resources use the NAT gateway in the same Availability Zone
  • The main route table sends internet traffic from the instances in the private subnet to the NAT gateway. The NAT gateway sends the traffic to the internet gateway using the NAT gateway’s Elastic IP address as the source IP address
  • A NAT gateway supports 5 Gbps of bandwidth and automatically scales up to 45 Gbps
  • You can associate exactly one Elastic IP address with a NAT gateway
  • A NAT gateway supports the following protocols: TCP, UDP, and ICMP
  • cannot associate a security group with a NAT gateway.
  • create a NAT gateway in the same subnet as your NAT instance, and then replace the existing route in your route table that points to the NAT instance with a route that points to the NAT gateway
  • A NAT gateway cannot send traffic over VPC endpoints, VPN connections, AWS Direct Connect, or VPC peering connections.
張 旭

VPCs and Subnets - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...VPC_Subnets.html

aws networking amazon cloud

shared by 張 旭 on 31 Jul 18 - No Cached
  • you must specify a range of IPv4 addresses for the VPC in the form of a Classless Inter-Domain Routing (CIDR) block
  • A VPC spans all the Availability Zones in the region
  • add one or more subnets in each Availability Zone.
  • ...19 more annotations...
  • Each subnet must reside entirely within one Availability Zone and cannot span zones.
  • Availability Zones are distinct locations that are engineered to be isolated from failures in other Availability Zones
  • If a subnet's traffic is routed to an internet gateway, the subnet is known as a public subnet.
  • If a subnet doesn't have a route to the internet gateway, the subnet is known as a private subnet.
  • If a subnet doesn't have a route to the internet gateway, but has its traffic routed to a virtual private gateway for a VPN connection, the subnet is known as a VPN-only subnet.
  • By default, all VPCs and subnets must have IPv4 CIDR blocks—you can't change this behavior.
  • The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses).
  • The first four IP addresses and the last IP address in each subnet CIDR block are not available for you to use
  • The allowed block size is between a /28 netmask and /16 netmask
  • The CIDR block must not overlap with any existing CIDR block that's associated with the VPC.
  • Each subnet must be associated with a route table
  • Every subnet that you create is automatically associated with the main route table for the VPC
  • Security groups control inbound and outbound traffic for your instances
  • network ACLs control inbound and outbound traffic for your subnets
  • each subnet must be associated with a network ACL
  • You can create a flow log on your VPC or subnet to capture the traffic that flows to and from the network interfaces in your VPC or subnet.
  • A VPC peering connection enables you to route traffic between the VPCs using private IP addresses
  • you cannot create a VPC peering connection between VPCs that have overlapping CIDR blocks
  • recommend that you create a VPC with a CIDR range large enough for expected future growth, but not one that overlaps with current or expected future subnets anywhere in your corporate or home network, or that overlaps with current or future VPCs
張 旭

Ask HN: What are the best practises for using SSH keys? | Hacker News - 0 views

news.ycombinator.com/item

security ssh key server

shared by 張 旭 on 14 Oct 16 - No Cached
  • Make sure you use full disk encryption and never stand up from your machine without locking it, and make sure you keep your local machine patched.
  • I'm more focused on just stealing your keys from you regardless of length
  • attacks that aren't after your keys specifically, e.g. your home directory gets stolen.
  • ...19 more annotations...
  • ED25519 is more vulnerable to quantum computation than is RSA
  • best practice to be using a hardware token
  • to use a yubikey via gpg: with this method you use your gpg subkey as an ssh key
  • sit down and spend an hour thinking about your backup and recovery strategy first
  • never share a private keys between physical devices
  • allows you to revoke a single credential if you lose (control over) that device
  • If a private key ever turns up on the wrong machine, you *know* the key and both source and destination machines have been compromised.
  • centralized management of authentication/authorization
  • I have setup a VPS, disabled passwords, and setup a key with a passphrase to gain access. At this point my greatest worry is losing this private key, as that means I can't access the server.What is a reasonable way to backup my private key?
  • a mountable disk image that's encrypted
  • a system that can update/rotate your keys across all of your servers on the fly in case one is compromised or assumed to be compromised.
  • different keys for different purposes per client device
  • fall back to password plus OTP
  • relying completely on the security of your disk, against either physical or cyber.
  • It is better to use a different passphrase for each key but it is also less convenient unless you're using a password manager (personally, I'm using KeePass)
  • - RSA is pretty standard, and generally speaking is fairly secure for key lengths >=2048. RSA-2048 is the default for ssh-keygen, and is compatible with just about everything.
  • public-key authentication has somewhat unexpected side effect of preventing MITM per this security consulting firm
  • Disable passwords and only allow keys even for root with PermitRootLogin without-password
  • You should definitely use a different passphrase for keys stored on separate computers,
  • 張 旭 on 14 Oct 16
     
    "Make sure you use full disk encryption and never stand up from your machine without locking it, and make sure you keep your local machine patched"
張 旭

Virtual Private Cloud (VPC)  |  Virtual Private Cloud  |  Google Cloud - 0 views

cloud.google.com/vpc

google gcp cloud system

shared by 張 旭 on 09 Nov 18 - No Cached
  • A single Google Cloud VPC can span multiple regions without communicating across the public Internet.
  • Google Cloud VPCs let you increase the IP space of any subnets without any workload shutdown or downtime.
  • Get private access to Google services, such as storage, big data, analytics, or machine learning, without having to give your service a public IP address.
  • ...3 more annotations...
  • Enable dynamic Border Gateway Protocol (BGP) route updates between your VPC network and your non-Google network with our virtual router.
  • Configure a VPC Network to be shared across several projects in your organization.
  • Hosting globally distributed multi-tier applications, by creating a VPC with subnets.
張 旭

Choosing an Executor Type - CircleCI - 0 views

circleci.com/...executor-types

circle CI

shared by 張 旭 on 14 Nov 18 - No Cached
  • Containers are an instance of the Docker Image you specify and the first image listed in your configuration is the primary container image in which all steps run.
  • In this example, all steps run in the container created by the first image listed under the build job
  • If you experience increases in your run times due to installing additional tools during execution, it is best practice to use the Building Custom Docker Images Documentation to create a custom image with tools that are pre-loaded in the container to meet the job requirements.
  • ...9 more annotations...
  • The machine option runs your jobs in a dedicated, ephemeral VM
  • Using the machine executor gives your application full access to OS resources and provides you with full control over the job environment.
  • Using machine may require additional fees in a future pricing update.
  • Using the macos executor allows you to run your job in a macOS environment on a VM.
  • In a multi-image configuration job, all steps are executed in the container created by the first image listed.
  • All containers run in a common network and every exposed port will be available on localhost from a primary container.
  • If you want to work with private images/registries, please refer to Using Private Images.
  • Docker also has built-in image caching and enables you to build, run, and publish Docker images via Remote Docker.
  • if you require low-level access to the network or need to mount external volumes consider using machine
張 旭

Internet Gateways - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...VPC_Internet_Gateway.html

aws networking system

shared by 張 旭 on 10 Jul 18 - No Cached
  • to provide a target in your VPC route tables for internet-routable traffic
  • to perform network address translation (NAT) for instances that have been assigned public IPv4 addresses
  • Ensure that instances in your subnet have a globally unique IP address (public IPv4 address, Elastic IP address, or IPv6 address)
  • ...10 more annotations...
  • To use an internet gateway, your subnet's route table must contain a route that directs internet-bound traffic to the internet gateway.
  • If your subnet is associated with a route table that has a route to an internet gateway, it's known as a public subnet.
  • To enable communication over the internet for IPv4, your instance must have a public IPv4 address or an Elastic IP address that's associated with a private IPv4 address on your instance.
  • Your instance is only aware of the private (internal) IP address space defined within the VPC and subnet
  • internet gateway logically provides the one-to-one NAT on behalf of your instance
  • To enable communication over the internet for IPv6, your VPC and subnet must have an associated IPv6 CIDR block, and your instance must be assigned an IPv6 address from the range of the subnet.
  • When you create a subnet, we automatically associate it with the main route table for the VPC.
  • the main route table doesn't contain a route to an internet gateway
  • Each instance that you launch into a VPC is automatically associated with its default security group.
  • a default security group allow no inbound traffic from the internet and allow all outbound traffic to the internet.
張 旭

Secrets - Kubernetes - 0 views

kubernetes.io/...secret

kubernetes secret password security

shared by 張 旭 on 05 Jul 19 - No Cached
  • Putting this information in a secret is safer and more flexible than putting it verbatim in a PodThe smallest and simplest Kubernetes object. A Pod represents a set of running containers on your cluster. definition or in a container imageStored instance of a container that holds a set of software needed to run an application. .
  • A Secret is an object that contains a small amount of sensitive data such as a password, a token, or a key.
  • Users can create secrets, and the system also creates some secrets.
  • ...63 more annotations...
  • To use a secret, a pod needs to reference the secret.
  • A secret can be used with a pod in two ways: as files in a volumeA directory containing data, accessible to the containers in a pod. mounted on one or more of its containers, or used by kubelet when pulling images for the pod.
  • --from-file
  • You can also create a Secret in a file first, in json or yaml format, and then create that object.
  • The Secret contains two maps: data and stringData.
  • The data field is used to store arbitrary data, encoded using base64.
  • Kubernetes automatically creates secrets which contain credentials for accessing the API and it automatically modifies your pods to use this type of secret.
  • kubectl get and kubectl describe avoid showing the contents of a secret by default.
  • stringData field is provided for convenience, and allows you to provide secret data as unencoded strings.
  • where you are deploying an application that uses a Secret to store a configuration file, and you want to populate parts of that configuration file during your deployment process.
  • a field is specified in both data and stringData, the value from stringData is used.
  • The keys of data and stringData must consist of alphanumeric characters, ‘-’, ‘_’ or ‘.’.
  • Newlines are not valid within these strings and must be omitted.
  • When using the base64 utility on Darwin/macOS users should avoid using the -b option to split long lines.
  • create a Secret from generators and then apply it to create the object on the Apiserver.
  • The generated Secrets name has a suffix appended by hashing the contents.
  • base64 --decode
  • Secrets can be mounted as data volumes or be exposed as environment variablesContainer environment variables are name=value pairs that provide useful information into containers running in a Pod. to be used by a container in a pod.
  • Multiple pods can reference the same secret.
  • Each key in the secret data map becomes the filename under mountPath
  • each container needs its own volumeMounts block, but only one .spec.volumes is needed per secret
  • use .spec.volumes[].secret.items field to change target path of each key:
  • If .spec.volumes[].secret.items is used, only keys specified in items are projected. To consume all keys from the secret, all of them must be listed in the items field.
  • You can also specify the permission mode bits files part of a secret will have. If you don’t specify any, 0644 is used by default.
  • JSON spec doesn’t support octal notation, so use the value 256 for 0400 permissions.
  • Inside the container that mounts a secret volume, the secret keys appear as files and the secret values are base-64 decoded and stored inside these files.
  • Mounted Secrets are updated automatically
  • Kubelet is checking whether the mounted secret is fresh on every periodic sync.
  • cache propagation delay depends on the chosen cache type
  • A container using a Secret as a subPath volume mount will not receive Secret updates.
  • Multiple pods can reference the same secret.
  • env: - name: SECRET_USERNAME valueFrom: secretKeyRef: name: mysecret key: username
  • Inside a container that consumes a secret in an environment variables, the secret keys appear as normal environment variables containing the base-64 decoded values of the secret data.
  • An imagePullSecret is a way to pass a secret that contains a Docker (or other) image registry password to the Kubelet so it can pull a private image on behalf of your Pod.
  • a secret needs to be created before any pods that depend on it.
  • Secret API objects reside in a namespaceAn abstraction used by Kubernetes to support multiple virtual clusters on the same physical cluster. . They can only be referenced by pods in that same namespace.
  • Individual secrets are limited to 1MiB in size.
  • Kubelet only supports use of secrets for Pods it gets from the API server.
  • Secrets must be created before they are consumed in pods as environment variables unless they are marked as optional.
  • References to Secrets that do not exist will prevent the pod from starting.
  • References via secretKeyRef to keys that do not exist in a named Secret will prevent the pod from starting.
  • Once a pod is scheduled, the kubelet will try to fetch the secret value.
  • Think carefully before sending your own ssh keys: other users of the cluster may have access to the secret.
  • volumes: - name: secret-volume secret: secretName: ssh-key-secret
  • Special characters such as $, \*, and ! require escaping. If the password you are using has special characters, you need to escape them using the \\ character.
  • You do not need to escape special characters in passwords from files
  • make that key begin with a dot
  • Dotfiles in secret volume
  • .secret-file
  • a frontend container which handles user interaction and business logic, but which cannot see the private key;
  • a signer container that can see the private key, and responds to simple signing requests from the frontend
  • When deploying applications that interact with the secrets API, access should be limited using authorization policies such as RBAC
  • watch and list requests for secrets within a namespace are extremely powerful capabilities and should be avoided
  • watch and list all secrets in a cluster should be reserved for only the most privileged, system-level components.
  • additional precautions with secret objects, such as avoiding writing them to disk where possible.
  • A secret is only sent to a node if a pod on that node requires it
  • only the secrets that a pod requests are potentially visible within its containers
  • each container in a pod has to request the secret volume in its volumeMounts for it to be visible within the container.
  • In the API server secret data is stored in etcdConsistent and highly-available key value store used as Kubernetes’ backing store for all cluster data.
  • limit access to etcd to admin users
  • Base64 encoding is not an encryption method and is considered the same as plain text.
  • A user who can create a pod that uses a secret can also see the value of that secret.
  • anyone with root on any node can read any secret from the apiserver, by impersonating the kubelet.
crazylion lee

Kryptonite - The new way to protect your private key on your phone. - 0 views

krypt.co

security ssh

shared by crazylion lee on 14 May 17 - No Cached
  • crazylion lee on 14 May 17
     
    "A new home for your SSH private key"
張 旭

Using Traefik as a reverse proxy | Blog Eleven Labs - 0 views

blog.eleven-labs.com/...ing-traefik-as-a-reverse-proxy

proxy networking

shared by 張 旭 on 15 Apr 22 - No Cached
  • a proxy is associated with the client(s), while a reverse proxy is associated with the server(s); a reverse proxy is usually an internal-facing proxy used as a ‘front-end’ to control and protect access to a server on a private network.
  • the restart: always instruction will allow our reverse-proxy service to restart automatically, on its own.
  • add an [api] section to enable the dashboard and the API
  • ...6 more annotations...
  • double the $ symbols in order to escape the $ symbols as it tries to reference a variable.
  • stay consistent with names inside routers and middlewares.
  • providers.file
  • the service name is always in the form of [service name]@[provider
  • write different routing rules for a service and how to generate SSL certificates
  • traefik.http.services.home.loadbalancer.server.port=8123 indicates that the service port I want to expose is 8123.
  • 張 旭 on 15 Apr 22
     
    "a proxy is associated with the client(s), while a reverse proxy is associated with the server(s); a reverse proxy is usually an internal-facing proxy used as a 'front-end' to control and protect access to a server on a private network."
張 旭

Cluster Networking - Kubernetes - 0 views

kubernetes.io/...networking

kubernetes networking network system

shared by 張 旭 on 08 Jul 19 - No Cached
  • Networking is a central part of Kubernetes, but it can be challenging to understand exactly how it is expected to work
  • Highly-coupled container-to-container communications
  • Pod-to-Pod communications
  • ...57 more annotations...
  • this is the primary focus of this document
    • 張 旭
      張 旭 on 27 Aug 21
       
      Cluster Networking 所關注處理的是： Pod 到 Pod 之間的連線
  • Pod-to-Service communications
  • External-to-Service communications
  • Kubernetes is all about sharing machines between applications.
  • sharing machines requires ensuring that two applications do not try to use the same ports.
  • Dynamic port allocation brings a lot of complications to the system
  • Every Pod gets its own IP address
  • do not need to explicitly create links between Pods
  • almost never need to deal with mapping container ports to host ports.
  • Pods can be treated much like VMs or physical hosts from the perspectives of port allocation, naming, service discovery, load balancing, application configuration, and migration.
  • pods on a node can communicate with all pods on all nodes without NAT
  • agents on a node (e.g. system daemons, kubelet) can communicate with all pods on that node
  • pods in the host network of a node can communicate with all pods on all nodes without NAT
  • If your job previously ran in a VM, your VM had an IP and could talk to other VMs in your project. This is the same basic model.
  • containers within a Pod share their network namespaces - including their IP address
  • containers within a Pod can all reach each other’s ports on localhost
  • containers within a Pod must coordinate port usage
  • “IP-per-pod” model.
  • request ports on the Node itself which forward to your Pod (called host ports), but this is a very niche operation
  • The Pod itself is blind to the existence or non-existence of host ports.
  • AOS is an Intent-Based Networking system that creates and manages complex datacenter environments from a simple integrated platform.
  • Cisco Application Centric Infrastructure offers an integrated overlay and underlay SDN solution that supports containers, virtual machines, and bare metal servers.
  • AOS Reference Design currently supports Layer-3 connected hosts that eliminate legacy Layer-2 switching problems.
  • The AWS VPC CNI offers integrated AWS Virtual Private Cloud (VPC) networking for Kubernetes clusters.
  • users can apply existing AWS VPC networking and security best practices for building Kubernetes clusters.
  • Using this CNI plugin allows Kubernetes pods to have the same IP address inside the pod as they do on the VPC network.
  • The CNI allocates AWS Elastic Networking Interfaces (ENIs) to each Kubernetes node and using the secondary IP range from each ENI for pods on the node.
  • Big Cloud Fabric is a cloud native networking architecture, designed to run Kubernetes in private cloud/on-premises environments.
  • Cilium is L7/HTTP aware and can enforce network policies on L3-L7 using an identity based security model that is decoupled from network addressing.
  • CNI-Genie is a CNI plugin that enables Kubernetes to simultaneously have access to different implementations of the Kubernetes network model in runtime.
  • CNI-Genie also supports assigning multiple IP addresses to a pod, each from a different CNI plugin.
  • cni-ipvlan-vpc-k8s contains a set of CNI and IPAM plugins to provide a simple, host-local, low latency, high throughput, and compliant networking stack for Kubernetes within Amazon Virtual Private Cloud (VPC) environments by making use of Amazon Elastic Network Interfaces (ENI) and binding AWS-managed IPs into Pods using the Linux kernel’s IPvlan driver in L2 mode.
  • to be straightforward to configure and deploy within a VPC
  • Contiv provides configurable networking
  • Contrail, based on Tungsten Fabric, is a truly open, multi-cloud network virtualization and policy management platform.
  • DANM is a networking solution for telco workloads running in a Kubernetes cluster.
  • Flannel is a very simple overlay network that satisfies the Kubernetes requirements.
  • Any traffic bound for that subnet will be routed directly to the VM by the GCE network fabric.
  • sysctl net.ipv4.ip_forward=1
  • Jaguar provides overlay network using vxlan and Jaguar CNIPlugin provides one IP address per pod.
  • Knitter is a network solution which supports multiple networking in Kubernetes.
  • Kube-OVN is an OVN-based kubernetes network fabric for enterprises.
  • Kube-router provides a Linux LVS/IPVS-based service proxy, a Linux kernel forwarding-based pod-to-pod networking solution with no overlays, and iptables/ipset-based network policy enforcer.
  • If you have a “dumb” L2 network, such as a simple switch in a “bare-metal” environment, you should be able to do something similar to the above GCE setup.
  • Multus is a Multi CNI plugin to support the Multi Networking feature in Kubernetes using CRD based network objects in Kubernetes.
  • NSX-T can provide network virtualization for a multi-cloud and multi-hypervisor environment and is focused on emerging application frameworks and architectures that have heterogeneous endpoints and technology stacks.
  • NSX-T Container Plug-in (NCP) provides integration between NSX-T and container orchestrators such as Kubernetes
  • Nuage uses the open source Open vSwitch for the data plane along with a feature rich SDN Controller built on open standards.
  • OpenVSwitch is a somewhat more mature but also complicated way to build an overlay network
  • OVN is an opensource network virtualization solution developed by the Open vSwitch community.
  • Project Calico is an open source container networking provider and network policy engine.
  • Calico provides a highly scalable networking and network policy solution for connecting Kubernetes pods based on the same IP networking principles as the internet
  • Calico can be deployed without encapsulation or overlays to provide high-performance, high-scale data center networking.
  • Calico can also be run in policy enforcement mode in conjunction with other networking solutions such as Flannel, aka canal, or native GCE, AWS or Azure networking.
  • Romana is an open source network and security automation solution that lets you deploy Kubernetes without an overlay network
  • Weave Net runs as a CNI plug-in or stand-alone. In either version, it doesn’t require any configuration or extra code to run, and in both cases, the network provides one IP address per pod - as is standard for Kubernetes.
  • The network model is implemented by the container runtime on each node.
crazylion lee

Duet Project Management - 0 views

duetapp.com

projectmanagement basecamp project-management project management

shared by crazylion lee on 04 Sep 16 - No Cached
  • crazylion lee on 04 Sep 16
     
    "Duet is self hosted so your data is always private, and it's completely brandable so that it matches your business. Best of all, its low one time fee means you will save hundreds over similar software "
crazylion lee

YubiKey 4 and YubiKey 4 Nano | U2F, OTP, PIV | Yubico - 0 views

www.yubico.com/...yubikey4

key lock hardware

shared by crazylion lee on 26 Apr 16 - No Cached
  • crazylion lee on 26 Apr 16
     
    "The YubiKey 4 is the strong authentication bullseye the industry has been aiming at for years, enabling one single key to secure an unlimited number of applications. Yubico's 4th generation YubiKey is built on high-performance secure elements. It includes the same range of one-time password and public key authentication protocols as in the YubiKey NEO, excluding NFC, but with stronger public/private keys, faster crypto operations and the world's first touch-to-sign feature. With the YubiKey 4 platform, we have further improved our manufacturing and ordering process, enabling customers to order exactly what functions they want in 500+ unit volumes, with no secrets stored at Yubico or shared with a third-party organization. The best part? An organization can securely customize 1,000 YubiKeys in less than 10 minutes. For customers who require NFC, the YubiKey NEO is our full-featured key with both contact (USB) and contactless (NFC, MIFARE) communications."
crazylion lee

bundler/gemstash - 0 views

github.com/gemstash

ruby gem cache

shared by crazylion lee on 22 Jun 16 - No Cached
  • crazylion lee on 22 Jun 16
     
    "Gemstash is both a cache for remote servers such as https://www.rubygems.org, and a private gem source."
張 旭

ssl - How to get .pem file from .key and .crt files? - Stack Overflow - 0 views

stackoverflow.com/...em-file-from-key-and-crt-files

https security server nginx apache ssl key

shared by 張 旭 on 22 Feb 17 - No Cached
  • openssl rsa -in server.key -text > private.pem openssl x509 -inform PEM -in server.crt > public.pem
  • A pem file contains the certificate and the private key.
張 旭

php - CakePHP: No such file or directory (trying to connect via unix:///var/mysql/mysql... - 0 views

stackoverflow.com/...onnect-via-unix-var-mysql-mysq

cakephp config php MVC framework development mac mysql

shared by 張 旭 on 08 Sep 13 - No Cached
  • 張 旭 on 08 Sep 13
     
    'port' => '/path/to/mysql.sock'
  • 張 旭 on 08 Sep 13
     
    'port' => '/private/tmp/mysql.sock'
1 - 20 of 46 Next › Last »
Showing 20▼ items per page