Group items tagged

When the Arduino Duemilanove microcontroller appeared in 2005, it featured a set of female pin headers exposing most of the pins of the ATmega168 for easy hacking and for connecting accessory boards known as 'Shields'. The purpose of a shield is to provide new plug-and-play functionality to the host microcontroller, such as circuit prototyping, motion control, sensor integration, network and radio communication, or gaming interfaces, without worrying too much about the hardware implementation details. Seven years after the birth of the original Arduino, new shields keep coming out and are being cataloged on http://shieldlist.org/, a testament to the versatility of the design. It is also simple to build a DIY shield when nothing out there will meet your needs or when you want to understand how the shield concept works from the ground up.

In separate keynote addresses in Silicon Valley, two Internet pioneers gave different takes on the future of the network of networks Monday (May 24). Vint Cerf, co-developer of the Net's TCP/IP protocol, shared his thoughts with developers of the smart electric grid, seen as a massive embedded extension to the Internet. Larry Roberts, who helped launch the forerunner of the Internet, explained his ideas for remedying the growing congestion that plagues the Web today. Smart grid developers can learn from the lessons of the Internet, Cerf told attendees at Connectivity Week here. They should follow the model of the Net in creating a layered architecture with plenty of room for flexibility in areas that cannot be anticipated today, he said in a keynote at Connectivity Week.

Ozmo Devices, the leading provider of low-power Wi-Fi Personal Area Network (Wi-Fi PAN) solutions, announced today that it started sampling its OZMO2000 chip to select peripheral manufacturers.  This is the first Wi-Fi solution to overcome the battery life, cost and compatibility issues that have limited the broad adoption of Wi-Fi for HID (human interface device) applications.  The OZMO2000 is currently available for use in Wi-Fi mouse, keyboard and remote control designs.  Furthermore, the solution is compatible with all Wi-Fi-enabled notebooks and desktops that are compatible with Windows 7.

In traditional short-haul microwave transmission (that is, line-of-sight microwave transmissions operating in the 18 GHz and 23 GHz radio bands),RF design engineers typically are concerned with signal aspects such as fade margins, signal reflections, multipath signals, and so forth. Like an accountant seeking to balance a financial spreadsheet, an RF design engineer normally creates an RF budget table, expressed in decibels (dB), in order to establish a wireless design. Aspects like transmit power and antenna gain are registered in the assets (or plus) column, and free space attenuation, antenna alignment, and atmospheric losses are noted in the liabilities (or minus) column. The goal is to achieve a positive net signal strength adequate to support the wireless path(s) called for in the design.

TTE Systems' RapidiTTy IDE provides a self-contained environment for developers who wish to create "time-triggered" microcontroller software in order to improve overall system reliability. RapidiTTy (Figure 1, below) is intended to address deeply-embedded applications including control and monitoring operations in medical, defence, automotive and industrial sectors, as well as in white and brown goods.

High Level Synthesis Architectural Optimization Basics In part 1 of this article we introduced basic filter bank theory and used the Synplify DSP High Level Synthesis (HLS) tool to implement an example filter bank into three alternative architectures. In part 2 we dive deeper into these three architectures to better understand how these filters work. We will also examine the HLS optimizations we applied and the resulting benefits. Example Filter Bank Review Before we proceed, let's quickly review our filter bank example. Our example, shown in Figure 1, is a size 16 DFT filter bank. The color scheme shows the sample rate change where a 16 MHz input sample rate (red) has been chosen and the output sample rate is downsampled by 16 (green).

bowl and pairing off to come up with a way to create and commercialise sensors and switches that generate their own power. The idea is that the parts will make external power sources redundant - because they can convert energy from body heat, light and vibrations straight into electricity. Self powered electronics have already sporadically been used in technology like wall-mount remote control units for air conditioners, says Nikkei, but existing parts are bulky and cost a couple thousand yen a piece. 3,000 yen is about $35 - which means they're not the best bet, financially, yet.

Single-walled carbon nanotube (SWCNT)-based thin film transistors (TFTs) could be at the core of next-generation flexible electronics – displays, electronic circuits, sensors, memory chips, and other applications that are transitioning from rigid substrates, such as silicon and glass, to flexible substrates. What's holding back commercial applications is that industrial-type manufacturing of large scale SWCNT-based nanoelectronic devices isn't practical yet because controlling the morphology of single-walled carbon nanotubes is still causing headaches for materials engineers.

Events such as natural disasters, military actions, and public safety threats have led to an increased need for robust robots — especially ones that can travel across complex terrain in any dimension. The ability to scale vertical building surfaces or other structures offers unique capabilities in military applications such as urban reconnaissance, sensor deployment, and setting up urban network nodes. SRI's novel clamping technology, called compliant electroadhesion, has enabled the first application of this technology to wall-climbing robots that can help with these situations.  As the name implies, electroadhesion is an electrically controllable adhesion technology. It involves inducing electrostatic charges on a wall substrate using a power supply connected to compliant pads situated on the moving robot. SRI has demonstrated robust clamping to common building materials including glass, wood, metal, concrete, etc. with clamping pressures in the range of 0.5 to 1.5 N per square cm of clamp (0.8 to 2.3 pounds per square inch). The technology works on conductive and non-conductive substrates, smooth or rough materials, and through dust and debris. Unlike conventional adhesives or dry adhesives, the electroadhesion can be modulated or turned off for mobility or cleaning. The technology uses a very small amount of power (on the order of 20 microwatts/Newton weight held) and shows the ability to repeatably clamp to wall substrates that are heavily covered in dust or other debris.

With the consumer demand for richer content and its resultant , increasing high data bandwidth continuing to drive communications systems, coding for error control has become extraordinarily important. One way to improve the bit error rate (BER), while maintaining high data reliability, is to use an error correction technique like the Viterbi algorithm. Originally conceived by Andrew Viterbi as an error-correction scheme for noisy digital communication, the Viterbi algorithm provides an efficient method for forward error correction (FEC) that improves channel reliability. Today, it is used in many digital communications systems in applications as diverse as CDMA and GSM digital cellular, dial-up modems, satellite, deep-space communications and 802.11 wireless LANs. It is also commonly used in speech recognition, keyword spotting and computational linguistics.

Verification of algorithm-intensive systems is a long, costly process. Studies show that the majority of flaws in embedded systems are introduced at the specification stage, but are not detected until late in the development process. These flaws are the dominant cause of project delays and a major contributor to engineering costs. For algorithm-intensive systems —including systems with communications, audio, video, imaging, and navigation functions— these delays and costs are exploding as system complexity increases. It doesn't have to be this way. Many designers of algorithm-intensive systems already have the tools they need to get verification under control. Engineers can use these same tools to build system models that help them find and correct problems earlier in the development process. This can not only reduce verification time, but also improves the performance of their designs. In this article, we'll explain three practical approaches to early verification that make this possible. First, let's examine why the current algorithm verification process is inefficient and error-prone. In a typical workflow, designs start with algorithm developers, who pass the design to hardware and software teams using specification documents.

The MAX13171E along with the MAX13173E/ MAX13175E, form a complete pin-selectable data terminal equipment (DTE) or data communication equipment (DCE) interface port that support the V.28 (RS-232), V.10/V.11 (RS-449/V.36, RS-530, RS-530A, X.21), and V.35 protocols. The MAX13171E transceivers carry the high-speed clock and data signals, while the MAX13173E transceivers carry the control signals. The MAX13171E can be terminated by the MAX13175E pin-selectable resistor termination network. The MAX13175E contains six pin-selectable, multiprotocol cable termination networks.

I remember when, a decade ago, Kevin Warwick, a professor at the University of Reading, in the U.K., implanted a radio chip in his own arm. The feat caused quite a stir. The implant allowed him to operate doors, lights, and computers without touching anything. On a second version of the project he could even control an electric wheelchair and produce artificial sensations in his brain using the implanted chip. Warwick had become, in his own words, a cyborg. The idea of a cyborg -- a human-machine hybrid -- is common in science fiction and although the term dates back to the 1960s it still generates a lot of curiosity. I often hear people asking, When will we become cyborgs? When will humans and machines merge? Although some researchers might have specific time frames in mind, I think a better answer is: It's already happening. When we look back at the history of technology, we tend to see distinct periods -- before the PC and after the PC, before the Internet and after the Internet, and so forth -- but in reality most technological advances unfold slowly and gradually. That's particularly true with the technologies that are allowing us to modify and enhance our bodies.

We've collected the most recent how-to and technical articles from Embedded.com on multithreading, multicores, multiprocessor-on-chip (MPoc), and multiprocessor system designs. We're constantly updating our lists of articles and industry links. Keep checking back to see what's new.

ON Semiconductor has expanded its multiplexer product line with devices that are designed to function at high input rates/clock frequencies. The NB6VQ572M, NB6LQ572, NB7L572, NB6L572M, NB7LQ572, NB6LQ572M, NB7VQ58M and NB7V58M mux/fanout devices are targeted at SONET, Gigabit Ethernet, Fiber Channel, backplane and other clock/data distribution applications. The NB6VQ572M and NB6LQ572M differential 4:1 clock/data input multiplexers with 1:2 current mode logic (CML) clock/data fanout buffers operate at up to 6 GHz/8 Gbps from a 1.8 V, 2.5 V or 3.3 V power supply. The new devices have a data dependent jitter of <10 ps and random clock jitter of less than 0.8 ps RMS.

Linear and nonlinear device models are costly and time-consuming to develop. Most compact model parameters are extracted from linear, 50-ohm S-parameters and predicting behavior under extreme nonlinear conditions or non-50 ohm terminations is unreliable. This white paper entitled "X-parameters and Beyond, AWR's Support of PHD and Nonlinear Behavioral Models," provides details on rapidly-emerging nonlinear models and measurement systems and how Thye are employed in AWR's Microwave Office high-frequency design software.

The design of a generator system requires many hours of detailed planning with the goal of creating an extremely reliable backup power source. Properly installed, the system will deliver the intended level of reliability. However, if incorrectly wired, the system can become a problem for both the owner and the manufacturer. While the generator installation can be handled by a range of people, from a trained technician to the typical homeowner, wiring mistakes can occur. Installation includes working with 120 VAC split phase, 240 V line voltage, along with low-voltage signals below 50 V. A small and easily made mistake, such as miswiring high voltage to low voltage, will destroy sensitive electronics quickly and may render the equipment inoperable. Thus, a resettable overcurrent and overvoltage solution capable of handling line voltage, electrostatic discharge (ESD), electrical fast transients (EFT), and current surge is required to protect low voltage interface circuits against this problem.