Skip to main content

Home/ Advanced Concepts Team/ Group items tagged ion

Rss Feed Group items tagged

LeopoldS

An optical lattice clock with accuracy and stability at the 10-18 level : Nature : Natu... - 0 views

  •  
    Progress in atomic, optical and quantum science1, 2 has led to rapid improvements in atomic clocks. At the same time, atomic clock research has helped to advance the frontiers of science, affecting both fundamental and applied research. The ability to control quantum states of individual atoms and photons is central to quantum information science and precision measurement, and optical clocks based on single ions have achieved the lowest systematic uncertainty of any frequency standard3, 4, 5. Although many-atom lattice clocks have shown advantages in measurement precision over trapped-ion clocks6, 7, their accuracy has remained 16 times worse8, 9, 10. Here we demonstrate a many-atom system that achieves an accuracy of 6.4 × 10−18, which is not only better than a single-ion-based clock, but also reduces the required measurement time by two orders of magnitude. By systematically evaluating all known sources of uncertainty, including in situ monitoring of the blackbody radiation environment, we improve the accuracy of optical lattice clocks by a factor of 22. This single clock has simultaneously achieved the best known performance in the key characteristics necessary for consideration as a primary standard-stability and accuracy. More stable and accurate atomic clocks will benefit a wide range of fields, such as the realization and distribution of SI units11, the search for time variation of fundamental constants12, clock-based geodesy13 and other precision tests of the fundamental laws of nature. This work also connects to the development of quantum sensors and many-body quantum state engineering14 (such as spin squeezing) to advance measurement precision beyond the standard quantum limit.
Juxi Leitner

Technology Review: Blogs: arXiv blog: Physicist Discovers How to Teleport Energy - 4 views

  • He gives the example of a string of entangled ions oscillating back and forth in an electric field trap, a bit like Newton's balls. Measuring the state of the first ion injects energy into the system in the form of a phonon, a quantum of oscillation. Hotta says that performing the right kind of measurement on the last ion extracts this energy. Since this can be done at the speed of light (in principle), the phonon doesn't travel across the intermediate ions so there is no heating of these ions. The energy has been transmitted without traveling across the intervening space.
  •  
    wonder if we can use that to power a moon base .... or on-board a SBSP satellite
  • ...1 more comment...
  •  
    will still have to read the actual article but am a bit sceptic if this interpretation really will hold ... what are our fundamental physicists saying about this?
  •  
    I am not the physicist but I thought it might be interesting, from a space security point-of-view
  •  
    Yes it seems really interesting and opens new possibilities. However this technology review article is not very good and the guy uses terms which have a precise meaning (like teleportation), which is different from the word we know... Quantum teleportation is what we use for designing quantum computers, but we are quite far from any practical applications. This energy teleportation will allow new scheme involving energy (if it is experimentally confirmed) which is very nice. However it seems this occurs in an entangled many-body system, which the only macroscopic one I know is a bose-eintein condensate (BEC). So it would mean infuse energy in the BEC by doing a measurement on one of the atom and extract it few millimeters away by doing a measurement on another atom. very far from any long distance power transmission...
Thijs Versloot

Ultrafast collisional ion heating by electrostatic shocks - 0 views

  •  
    Collisionless electrostatic shocks (CES) are the dominant process in heating a plasma when using high power lasers. It turns out that ion-ion collisions actually only play a small role. The ability to create small regions of very high ion energy density on time scales shorter than that of hydrodynamic expansion will be of interest in attempts to understand the processes involved in inertial confinement fusion.
Marcus Maertens

Silent and Simple Ion Engine Powers a Plane with No Moving Parts - Scientific American - 1 views

  •  
    Why not power an airplane with an ion thruster?
Thijs Versloot

New polymers could provide breakthrough in li-ion batteries - 0 views

  •  
    DeSimone and his team have been working with PFPE for years, and during their research, the crew found that another polymer electrolyte, polyethylen glycol or PEG, and PFPE could combine to dissolve salt, and potentially function as an electrolyte. When his team attached the PFPE to dimethyl carbonate, an electrolyte traditionally used in batteries, the resulting PFPE-DMC was a polymer that could move a battery's ions with insane levels of efficiency while remaining stable.
Juxi Leitner

Rocket company tests world's most powerful ion engine - space - 05 October 2009 - New S... - 2 views

  • On Wednesday, it ran its VX-200 engine at 201 kilowatts in a vacuum chamber in Houston, passing the 200-kilowatt mark for the first time.
LeopoldS

Light-induced reversal of ion segregation in mixed-halide perovskites | Nature Materials - 0 views

  •  
    Light-induced reversal of ion segregation in mixed-halide perovskites
LeopoldS

Ultra-efficient ionization of heavy atoms by intense X-ray free-electron laser pulses :... - 0 views

  •  
    Extremely charged Xe ions by stripping off more electrons than previously thought possible ...
santecarloni

LHC trials proton-lead collisions - physicsworld.com - 0 views

  •  
    Physicists at CERN's Large Hadron Collider (LHC) are analysing the results of their first attempt at colliding protons and lead ions. Further attempts at proton-lead collisions are expected over the next few weeks. If these trials are successful, a full-blown experimental programme could run in 2012.
santecarloni

Graphene Battery Turns Ambient Heat Into Electric Current - Technology Review - 0 views

  •  
    "Physicists have built a graphene battery that harvests energy from the thermal movement of ions in solution." Can it actually work?
Thijs Versloot

The SupraThermal Ion Monitor for space weather predictions - 4 views

  •  
    The novel part here is that it can be scaled down to the cubesat platform. I then wondered, could we place multiple of such Cubesats in a 'decaying orbit' around the Sun? Fractionated will give spatial and temporal information which, even with a simple langmuir probe setup, can give information on density, temperature, velocity, ion energy distribution, potential.. Of course they will be lost relatively quickly, but more could be ejected from a mother ship which is orbiting at a safer distance.
  •  
    For example like the KickSat projec https://www.kickstarter.com/projects/zacinaction/kicksat-your-personal-spacecraft-in-space Although a pc-reboot due to a radiation event in the electronics has reset the deployment timeline to approximately 2 days after re-entry... http://www.huffingtonpost.co.uk/2014/05/06/kicksat-satellites_n_5273821.html
pacome delva

Physics - Outsmarting decoherence in a trapped ion quantum computer - 0 views

  • This is the first ion trap demonstration of a set of logical gates that are universal for quantum computation
Francesco Biscani

Ion engine could one day power 39-day trips to Mars - space - 22 July 2009 - New Scientist - 0 views

  •  
    As I mentioned it into my thesis, this engine bridges the gap between chemical and low-thrust propulsion systems. To be more specific: Isp should vary between 1000 and 30000s, and the thrust amplitude should reach up to 1200 N. It is interesting to see that the concept is actually moving forward ...
ESA ACT

Quantum Leap: Information Teleported between Ions at a Distance: Scientific American - 0 views

shared by ESA ACT on 24 Apr 09 - Cached
  •  
    a good alternative for going to Rome if there are pilot strikes until then
Thijs Versloot

Bio-Derived Porous Carbon Anodes for Li-ion Batteries #Nature - 3 views

  •  
    Here we explore the electrochemical performance of pyrolyzed skins from the species A. bisporus, also known as the Portobello mushroom, as free-standing, binder-free, and current collector-free Li-ion battery anodes. At temperatures above 900 °C, the biomass-derived carbon nanoribbon-like architectures undergo unique processes to become hierarchically porous. Basically they burned a Portobello mushroom and used it as a battery... now thats an multidisciplinary advanced concept
Lionel Jacques

IBM looking to put lithium-air batteries on the road - 0 views

  •  
    f existing lithium-ion batteries were scaled up to match the range capacity of gas-powered vehicles, they would be unfeasibly large and heavy. Lithium-air batteries, which have the potential to provide energy densities that rivals traditional gasoline-powered engines, are seen as a possible solution.
LeopoldS

Graphite + water = the future of energy storage - Monash University - 6 views

  •  
    any idea how this works - who wants to have a closer look at it?
  • ...3 more comments...
  •  
    Water is used for keeping the graphene stacks separate. Without water or some other separation method the different graphene stacks would just stick together and graphene would lose its nice properties (like a huge surface). So, water has nothing to do with energy but is just the material which keeps the graphene stacks at distance. The result is a gel. Still, energy needs to be stored in the gel.
  •  
    and the different graphene layers act as anodes and cathodes??
  •  
    Layer orientation in a gel is random. Additionally to that, cathodes and anodes are about charge seperation. Graphene layers are (as far as I understand) supposed to provide huge surfaces to which something, maybe a charge, can be attached. So do we need ions and electrons? Probably not. Probably just electrons which can travel easily through the gel. I guess the whole gel (and all layers inside) would be nagtively charged, making the gel blob a fluid cathode. But again, it's just a guess.
  •  
    Wouldn't it be worth having a closer look?
  •  
    it's still not clear to me how to get electricity in and out of this thing?
Tom Gheysens

Biomimicr-E: Nature-Inspired Energy Systems | AAAS - 4 views

  •  
    some biomimicry used in energy systems... maybe it sparks some ideas
  •  
    not much new that has not been shared here before ... BUT: we have done relativley little on any of them. for good reasons?? don't know - maybe time to look into some of these again more closely Energy Efficiency( Termite mounds inspired regulated airflow for temperature control of large structures, preventing wasteful air conditioning and saving 10% energy.[1] Whale fins shapes informed the design of new-age wind turbine blades, with bumps/tubercles reducing drag by 30% and boosting power by 20%.[2][3][4] Stingray motion has motivated studies on this type of low-effort flapping glide, which takes advantage of the leading edge vortex, for new-age underwater robots and submarines.[5][6] Studies of microstructures found on shark skin that decrease drag and prevent accumulation of algae, barnacles, and mussels attached to their body have led to "anti-biofouling" technologies meant to address the 15% of marine vessel fuel use due to drag.[7][8][9][10] Energy Generation( Passive heliotropism exhibited by sunflowers has inspired research on a liquid crystalline elastomer and carbon nanotube system that improves the efficiency of solar panels by 10%, without using GPS and active repositioning panels to track the sun.[11][12][13] Mimicking the fluid dynamics principles utilized by schools of fish could help to optimize the arrangement of individual wind turbines in wind farms.[14] The nanoscale anti-reflection structures found on certain butterfly wings has led to a model to effectively harness solar energy.[15][16][17] Energy Storage( Inspired by the sunlight-to-energy conversion in plants, researchers are utilizing a protein in spinach to create a sort of photovoltaic cell that generates hydrogen from water (i.e. hydrogen fuel cell).[18][19] Utilizing a property of genetically-engineered viruses, specifically their ability to recognize and bind to certain materials (carbon nanotubes in this case), researchers have developed virus-based "scaffolds" that
Thijs Versloot

Magnetic bubble may give space probes a soft landing - 4 views

  •  
    I am also looking into this idea since some time and it seems NASA is already ahead, awarding two contract to investigate magnetoshell aerocapture. This could be interesting for probes that want to enter eg Marsian atmospheres at relatively high velocity. Or for multiple re-entry s/c at Earth. The idea of the experiment, The satellite will carry a copper coil, powered by a lithium-ion battery, that generates a magnetic field around the probe. As it descends, the spacecraft will eject a small amount of plasma. This gets trapped in the magnetic field, creating a protective bubble that stops air molecules colliding with the craft and producing heat.
  •  
    A few years back Mimmo has worked on this, rather from the theory side if I remember well ...
  •  
    The power requirements for such a thing must be HUGE!
1 - 20 of 32 Next ›
Showing 20 items per page