Skip to main content

Home/ Advanced Concepts Team/ Group items tagged fiber

Rss Feed Group items tagged

johannessimon81

Wood pulp extract stronger than carbon fiber or Kevlar - 0 views

  •  
    The Forest Products Laboratory of the US Forest Service has opened a US$1.7 million pilot plant for the production of cellulose nanocrystals (CNC) from wood by-products materials such as wood chips and sawdust. Prepared properly, CNCs are stronger and stiffer than Kevlar or carbon fibers, so that putting CNC into composite materials results in high strength, low weight products.
Nicholas Lan

Google Seeks To Plant Antenna Farm in Iowa » Data Center Knowledge - 0 views

  •  
    Google subsidiary Google Fiber, Inc. is seeking permission to place satellite antennas on land near its data center in Council Bluffs, Iowa. The antennas could be used to receive content feeds from broadcast networks that could be bundled with a high-speed fiber service.
  •  
    an oddly similar story http://venturebeat.com/2012/02/20/apple-is-solar-friendly/ apple to build largest solar array in US
Ma Ru

Error Undoes Faster-Than-Light Neutrino Results - 3 views

  •  
    :-)
  • ...1 more comment...
  •  
    And this guy is 200 bucks ahead http://xkcd.com/955/
  •  
    Well, it's not yet confirmed... That error would be worse than the magnetic moment of the muon about 10 years ago. There, it was "at least" a conflict of conventions used in the computer codes!
  •  
    In a statement based on an earlier press release from the OPERA collaboration, CERN said two possible "effects" may have influenced the anomalous measurements. One of them, due to a possible faulty connection between the fiber-optic cable bringing the GPS signals to OPERA and the detector's master clock, would have caused the experiment to underestimate the neutrinos' flight time, as described in the original story. The other effect concerns an oscillator, part of OPERA's particle detector that gives its readings time stamps synchronized to GPS signals. Researchers think correcting for an error in this device would actually increase the anomaly in neutrino velocity, making the particles even speedier than the earlier measurements seemed to show. CERN's statement says OPERA scientists are studying the "potential extent of these two effects" but doesn't indicate which source of error (if either) is likely to outweigh the other. However, Lucia Votano, director of the Gran Sasso laboratory, says the "main suspicion" focuses on the optical-fiber connection. She adds that OPERA researchers deserve credit for "having tenaciously followed this particular evidence via checks completed in the last few days." The two effects will get a new round of tests in May, when the two labs are scheduled to make velocity measurements with short-pulsed beams designed to give readings much more precise than scientists have achieved so far.
Isabelle Dicaire

Measuring height by connecting clocks - 2 views

  •  
    They were able to compare the ticking rates of two optical clocks separated by 2000 km, with the objective of computing sea level based on the effect gravity has on the clock ticking rate. They did the experiment using glass optical fibers, but I wonder if we could one day do the same from orbit, to measure the gravitational field around Earth.
  •  
    isn't this is effectively what pacome has been doing with his time for the last few years? e.g. http://arxiv.org/pdf/1308.6766v1.pdf also mentioning the ACES experiment
Juxi Leitner

Academics and Research: Virginia Tech Students Build Humanoid | Robotics Trends - 0 views

  •  
    CHARLI is the first untethered, autonomous, full-sized, walking, humanoid robot with four moving limbs and a head, built in the United States. His two long legs and arms can move and gesture thanks to a combination of pulleys, springs, carbon fiber rods, and actuators. CHARLI soon will be able to talk as well.
ESA ACT

NASA - A Telescope Made of Moondust - 0 views

  •  
    Composite materials are synthetic materials made by mixing fibers or granules of various materials into epoxy and letting the mixture harden. Composites combine two valuable properties: ultralight weight and extraordinary strength.
johannessimon81

The world's first Carbon Fiber 3D Printer - 3 views

  •  
    Something for the ACT! It costs just ~$5000.
  •  
    nice indeed! just have to find a good project for it ...
dejanpetkow

Photonic calculus with analog computer - 5 views

  •  
    Weird.
  •  
    This reminds me a 2013 paper on how to perform derivatives, integrals and even time reversal in optical fibres: http://www.nature.com/srep/2013/130403/srep01594/full/srep01594.html "The manipulation of dynamic Brillouin gratings in optical fibers is demonstrated to be an extremely flexible technique to achieve, with a single experimental setup, several all-optical signal processing functions. In particular, all-optical time differentiation, time integration and true time reversal are theoretically predicted, and then numerically and experimentally demonstrated."
  •  
    Would this kind of computer be more space environment resistive?
Thijs Versloot

Long-range chemical sensors using new high power continuum lasers - 0 views

  •  
    Short range chemical analysis methods exist already, but using new high power lasers one could extend the operation length to e.g aircraft.
  •  
    Isabelle?
  •  
    The optical setup is very simple and lightweight: a compact semi-conductor DFB laser source and an all optical fiber system for amplification and supercontinuum generation. Interesting for space applications!
Thijs Versloot

Repeated self-healing in composite materials - 1 views

  •  
    Sottos, White, Moore, and their team created 3D vascular networks-patterns of microchannels filled with healing chemistries-that thread through a fiber-reinforced composite. When damage occurs, the networks within the material break apart and allow the healing chemistries to mix and polymerize, autonomously healing the material, over multiple cycles.
jcunha

Chemical analysis in Earth and Space via Raman Spectroscopy - 2 views

  •  
    "A new lightweight, energy-efficient tool for analyzing a material's chemical makeup could improve the detection abilities of various technologies, ranging from bomb-detecting drones to space rovers searching for signs of life". Raman Spectroscopy is about measuring vibrational modes in molecules. This vibrational modes are in the meV typically, turning Raman Spectroscopy into a high precision technique. This impressive work shows a new technique based on the use of optical fibers coupled to photomultipliers allowing its use, author's word, in extreme conditions such as unmanned aircraft vehicles (UAVs) and Mars/Moon rovers.
pacome delva

New Material: Network of 'Streets' for Light - 1 views

  • In recent years, researchers have created early versions of "invisibility cloaks" and advanced optical fibers by manipulating light using structures composed of tiny, repeating units. In the 9 April Physical Review Letters, a team proposes a different way to make an artificial optical material--from a network of light-guiding filaments. If such structures are practical, they could open new ways to control light in technologies ranging from high-speed telecommunication to high-resolution imaging.
LeopoldS

Biophysical Journal - Silk Fiber Mechanics from Multiscale Force Distribution Analysis - 2 views

  •  
    something for Camilla and Tobias ...
LeopoldS

pH-Dependent Dimerization and Salt-Dependent Stabilization of the N-terminal Domain of ... - 3 views

  •  
    how the spider silk gets so strong ...
  •  
    C'mon Leopold! It is obvious from the title.
  •  
    :-)
Luís F. Simões

Wind Power Without the Blades: Big Pics : Discovery News - 4 views

  • The carbon-fiber stalks, reinforced with resin, are about a foot wide at the base tapering to about 2 inches at the top. Each stalk will contain alternating layers of electrodes and ceramic discs made from piezoelectric material, which generates a current when put under pressure. In the case of the stalks, the discs will compress as they sway in the wind, creating a charge.
  • Based on rough estimates, said Núñez-Ameni the output would be comparable to that of a conventional wind farm covering the same area
  • After completion, a Windstalk should be able to produce as much electricity as a single wind turbine, with the advantage that output could be increased with a denser array of stalks. Density is not possible with conventional turbines, which need to be spaced about three times the rotor's diameter in order to avoid air turbulence. But Windstalks work on chaos and turbulence so they can be installed much closer together, said Núñez-Ameni.
  • ...1 more annotation...
  • Núñez-Ameni also reports that the firm is currently working on taking the Windstalk idea underwater. Called Wavestalk, the whole system would be inverted to harness energy from the flow of ocean currents and waves.
  •  
    additional information: http://atelierdna.com/?p=144
  •  
    isn't this a bit of a contradiction: on the one hand: "Based on rough estimates, said Núñez-Ameni the output would be comparable to that of a conventional wind farm covering the same area" and on the other: "After completion, a Windstalk should be able to produce as much electricity as a single wind turbine, with the advantage that output could be increased with a denser array of stalks. Density is not possible with conventional turbines, which need to be spaced about three times the rotor's diameter in order to avoid air turbulence. " still, very interesting concept!
jcunha

New laser to shine light on remote sensing - 3 views

  •  
    A revolutionary new type of laser (fiber laser) is promising major advances in remote sensing of greenhouse gases.The new laser can operate (bed tuned) over a large range within the infrared light spectrum.
  •  
    Reads too good to be true .... where is Isabelle when we need her ? :-)
hannalakk

Design of a multi-agent, fiber composite digital fabrication system | Science Robotics - 3 views

  •  
    Swarm-based fabrication of interwoven composite tubes via a fully autonomous, cooperative system can help create architectural-scale structures in effective and efficient ways, including in remote environments.
1 - 18 of 18
Showing 20 items per page