Group items tagged

DRIVER-WATER TREATMENT TECHNOLOGY Ozone water treatment oxidizes iron, manganese, and sulfur in your well water to form insoluble metal oxides or elemental sulfur. These insoluble particles such as rust, are then removed by filtration which is typically activated carbon, manganese dioxide, or other media such as filter sand. Ozone is much faster at killing bacteria and oxidizing iron and manganese compared to chlorine or peroxide. One advantage for home use is that ozone is quite unstable and will degrade over a time frame ranging from a few seconds to 30 minutes.

Most of what we hear about greenhouse gases is associated with carbon dioxide. This research focused on removal of methane, which would have a higher payback if a deployable solution can be identified. "...removing about three years-worth of human-caused emissions of the potent greenhouse gas would reduce global surface temperatures by approximately 0.21 degrees Celsius while reducing ozone levels enough to prevent roughly 50,000 premature deaths annually." The case for funding this technology is strong - "Removing methane from the atmosphere could reduce temperatures even faster than carbon dioxide removal alone because methane is 81 times more potent in terms of warming the climate over the first 20 years after its release, and about 27 times more potent over a century. Methane removal also improves air quality by decreasing the concentration of tropospheric ozone, exposure to which causes an estimated one million premature deaths annually worldwide due to respiratory illnesses."

Here are 12 critical facts about TTHM as the city's fight to reduce it continues: 1. Trihalomethanes are actually a group of four chemicals that are formed along with other disinfection byproducts when chlorine reacts with organic materials such as leaves or dirt in water, according to the U.S. Environmental Protection Agency. 2. TTHMs are odorless and colorless, according to the Michigan Department of Environmental Quality. That means the high levels of TTHM in Flint water last year are not related to problems such as discoloration and odor in tap water. 3. The four trihalomethane chemicals are chloroform, bromodichloromethane, dibromochloromethane and bromoform. 4. U.S. EPA regulates TTHM at a maximum allowable, annual, average level of 80 parts per billion. The standard has been in place since December 2001 for large public surface water systems and since December 2003 for small surface water and all groundwater systems. 5. Four of eight testing sites in Flint averaged more than the acceptable limit of 80 parts per billion of TTHM last year. 6. Testing for TTHM is done on a quarterly basis, which means that people who use the system are exposed to water for several months before public notice is required. That's because TTHM is a chronic -- not immediate --health threat, according to the DEQ. 7. U.S. EPA estimates the 80 parts per billion standard prevents an estimated 280 cases of bladder cancer each year out of a total of more than 330 million people who use public water supplies nationwide. 8. Since it started using the Flint River as its water source, three quarterly tests have produced these TTHM results in the city: 15 samples have been above the TTHM threshold. Nine samples have tested at less than 80 parts per billion. 9. The most recent quarterly test showed just one site of eight that was above the 80 parts per billion threshold. And a voluntary test of the same sites in late January by the city were all within were all within the limits. 10. The testin