Group items tagged

4" Line Volage New Construction Non-IC Universal Housing Thermally protected, UL listed for damp locations. UL listed for feed-through branch circuit wiring. Dimmable with standard line-voltage incandescent dimmers. Adjustable socket mounting plate. J-box accessible through ceiling cut-out. 4-inch remodeling and Non-IC housings fit into tight 6-inch joist ceiling spaces. Non-IC units require 3-inch clearances on all sides. Line Voltage fixtures are available for Par16, R20, A19 (lamp not included) or 120V 50W MR16 GU10 Twist and Lock Lline Voltage Lamp. When using GU10 lamps, an adapting cable (AC-E26/GU10) is required. Housing is supplied with thermal protector Dimension: Length: 8", Width: 5-1/4", Depth: 5-1/2" Cut Out: 4-3/8"Ø Hanger Bars: Adjustable 14-1/4" to 24-1/2" Bulb: PAR16, PAR20 120V 50W Max. Sold separately. Input Voltage: 120V

ESS-Quick Adapt Low Voltage Pendant Aluminum square disk with frosted glass. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Halogen Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 4-3/8" x 4-3/8",Height: 1-3/8" Bulb: Halogen JC Bi-Pin Included Input Voltage: 12/24V Max Wattage: 50W Finish: SN-Satin Nickel

4" Low Voltage Non-IC Housing for Remodeling Models: LV4000R-4" Non-IC Housing for Remodeling LV4000RA-4" Non-IC Airtight Housing for Remodeling Thermally protected, listed for damp locations UL listed for feed-through branch circuit wiring. Integral 120V/12V AC 60Hz , pre-wired snap-out magnetic transformers. Dimmable with magnetic low-voltage dimmers. Remodeling housing models allow wiring below ceiling plane. J-box and transformer accessible through ceiling cut-out. 4-inch remodeling housings fit into tight 6-inch joist ceiling spaces. Airtight housings are Gasketed to prevent airflow through the housing from heating or cooling systems. Compliant with State of Washington restricted airflow requirements (WSEC Code) Non-IC units require 3-inch of clearance on all sides; IC units may be covered with insulation to conserve energy. Lamps sold separately. Dimension: Length: 14-1/2", Width: 4-5/8", Depth: 5-3/4" Cut Out: 4-3/8" Bulb: 50W MR16 Input Voltage: 120V Output Voltage: 12V

4" Low Voltage IC Housing for New Construction Models: LV4000IC-4" IC Housing for New Construction LV4000ICA-4" IC Airtight Housing for New Construction Thermally protected, listed for damp locations UL listed for feed-through branch circuit wiring. Integral 120V/12V AC 60Hz , pre-wired snap-out magnetic transformers. Dimmable with magnetic low-voltage dimmers. Remodeling housing models allow wiring below ceiling plane. J-box and transformer accessible through ceiling cut-out. 4-inch remodeling housings fit into tight 6-inch joist ceiling spaces. Airtight housings are Gasketed to prevent airflow through the housing from heating or cooling systems. Compliant with State of Washington restricted airflow requirements (WSEC Code) Non-IC units require 3-inch of clearance on all sides; IC units may be covered with insulation to conserve energy. Lamps sold separately. Dimension: Length: 12-1/4", Width: 7-3/4", Depth: 7" Cut Out: 4-3/8" Hanger Bars: Adjustment 14-1/2" to 24-1/2" Bulb: 50W MR16 Input Voltage: 120V Output Voltage: 12V

4" Low Voltage NON IC Housing for New Construction Model: LV4000B-4" Non-IC Universal Housing for New Construction LV4000BA-4" Non-IC Airtight Universal Housing for New Construction Thermally protected, listed for damp locations UL listed for feed-through branch circuit wiring. Integral 120V/12V AC 60Hz , pre-wired snap-out magnetic transformers. Dimmable with magnetic low-voltage dimmers. Remodeling housing models allow wiring below ceiling plane. J-box and transformer accessible through ceiling cut-out. 4-inch remodeling housings fit into tight 6-inch joist ceiling spaces. Airtight housings are Gasketed to prevent airflow through the housing from heating or cooling systems. Compliant with State of Washington restricted airflow requirements (WSEC Code) Non-IC units require 3-inch of clearance on all sides; IC units may be covered with insulation to conserve energy. Lamps sold separately. Dimension: Length: 10-1/2", Width: 5-1/4", Height: 5-1/2" Cut Out: 4-3/8" Hanger Bars: Adjustment 14-1/2" to 24-1/2" Bulb: 50W MR16 Input Voltage: 120V Output Voltage: 12V

Aluminum Die Cast Construction Vertical Adjustment: 180°, Rotation: 350° There is no Visible Socket Wire Thumb-Screw secures tilt angle. Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 150W PAR38 MED Finish: White, Black, Silver Grey

Aluminum Die Cast Construction Vertical Adjustment: 180°, Rotation: 330° Thumb-Screw secures tilt angle. Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 75W PAR30 MED Finish: White, Black, Silver Grey

Aluminum Die Cast Construction Vertical Adjustment: 180°, Rotation: 225° There is no Visible Socket Wire Thumb-Screw secures tilt angle. Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 50W PAR20 MED Finish: White, Black, Silver Grey

Aluminum Die Cast Construction Vertical Adjustment: 200°, Rotation: 180° Thumb-Screw Secures Aiming Angles Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 50W PAR20 (2) MED Finish: White, Black, Silver Grey

Aluminum Die Cast Construction Vertical Adjustment: 200°, Rotation: 180° There is no Visible Socket Wire Thumb-Screw Secures Aiming Angles Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 50W PAR20 (2) MED Finish: White, Black, Silver Grey

Die Cast and Machined Aluminum Construction Vertical Adjustment: 180°, Rotation: 350° Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 75W PAR30 MED Finish: White, Black, Silver Grey

Aluminum Die Cast Construction in Satin Chrome finish Vertical Adjustment: 90°, Rotation: 330° There is no Visible Socket Wire Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 50W MR16 GU10 Finish: Satin Chrome

Die Cast Construction Vertical Adjustment: 90°, Rotation: 330° There is no Visible Socket Wire Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 75W PAR30 MED Finish: White, Black, Satin Chrome

Aluminum Die Cast Construction in Satin Chrome finish Vertical Adjustment: 90°, Rotation: 330° There is no Visible Socket Wire Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 50W MR16 GU10 Finish: Satin Chrome

Universal Adjustable Socket Depth Vertical Adjustment: 90°, Rotation: 330° Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 150W PAR20/30/38 R20/30/40 MED Finish: White, Black, Satin Chrome

Die Cast Construction in Satin Chrome finish Vertical Adjustment: 90°, Rotation: 330° Dimmable with Standard Line Voltage Incandescent Dimmer There is no Visible Socket Wire Input Voltage: 120V, Output Voltage: 12V Bulb: 50W PAR20 MED Finish: Satin Chrome

Die Cast Construction Vertical Adjustment: 90°, Rotation: 330° Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 150W PAR38 MED Finish: White, Black, Satin Chrome

Flatback Step Baffle - Medium Vertical Adjustment: 90°, Rotation: 330° Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 75W PAR30 R30 MED Finish: White, Black

Step Baffle - Medium Vertical Adjustment: 90°, Rotation: 330° Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 75W PAR30 R30 MED Finish: Black, White

Roundback Step Baffle - Medium Vertical Adjustment: 90°, Rotation: 330° Dimmable with Standard Line Voltage Incandescent Dimmer Input Voltage: 120V, Output Voltage: 12V Bulb: 75W PAR30 R30 MED Finish: White, Black