Group items tagged

ESS-Quick Adapt Low Voltage Pendant Aluminum square disk with frosted glass. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Halogen Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 4-3/8" x 4-3/8",Height: 1-3/8" Bulb: Halogen JC Bi-Pin Included Input Voltage: 12/24V Max Wattage: 50W Finish: SN-Satin Nickel

4" Remodel IC Airtight Housing 4" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required High tension tempered steel springs secure remodel housings evenly to ceiling. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Lamp: 9 Osram LEDs at 1.2W each are available in two different temperatures with dimmable capabilities down to 3%. 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Mounted to the junction box for cool operation and easy access. Class 2 driver. Dimension: Length: 13-1/8", Width: 4-3/4", Depth: 6-3/8", Ceiling Opening: 4-1/4"

4" New Construction IC Airtight Housing 4" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on the frame. Bar hangers are parallel to junction box, but can be repositioned 90 degrees. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Lamp: 9 Osram LEDs at 1.2W each are available in two different temperatures with dimmable capabilities down to 3%. 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Mounted to the junction box for cool operation and easy access. Class 2 driver. Dimension: Length: 12-5/8", Width: 8-1/8", Depth: 6-3/8", Ceiling Opening: 4-1/4"

5" New Construction IC Airtight Housing "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required 5" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. Mounted to the junction box for cool operation and easy access. Class 2 driver. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on the frame. Bar hangers are parallel to junction box, but can be repositioned 90 degrees. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Lamp: 12 Osram LEDs at 1.2W each 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Dimension: Length: 10-1/2", Width: 7-1/4", Depth: 7-1/2", Ceiling Opening: 5-5/8"

5" Remodel IC Airtight Housing 5" LED housings offers affordable solutions for new technology along with energy savings. The LED Driver is attached to the housing to allow ease of installation. "IC" Insulated Ceiling housings are direct contact rated- no minimum clearances is required. High tension tempered steel springs secure remodel housings evenly to ceiling. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Economical 2-wire dimming down to 3%. 50,000 hours at 70% lumen maintenance rated life. Lamp:12 Osram LEDs at 1.2W each 120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Mounted to the junction box for cool operation and easy access. Dimension:Length: 13", Width: 6-1/4", Depth: 7-1/2", Ceiling Opening: 5-5/8"

4-1/2" Aperture, 3000K Self Flanged Reflector Trim 5" LED trims offers affordable solutions for new technology along with energy savings. The LED trims come with a diffusing lens that minimizes brightness, while still providing optimal lighting distribution. With a quick connect attached the trim and housing, installation is made easy. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Three Year Limited Warranty Reflector Finishes: Platinum Diffused (P), and White (W) Flange Finish:Platinum Diffused (P), and White (W) Lamp: 12 Osram® LEDs at 1.2W each available in two different temperatures with dimmable capabilities down to 3%. Up to 705 lumens depending on color temperature and reflector. Kelvin Temperature: 3000K CCT Dimension: Aperture Diameter: 4-1/2", Outside Diameter: 6-1/2"

3-1/2" Aperture, 3000K Self Flanged Reflector LED Trim 4" LED trims offers affordable solutions for new technology along with energy savings. The LED trims come with a diffusing lens that minimizes brightness, while still providing optimal lighting distribution. With a quick connect attached the trim and housing, installation is made easy. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Reflector Finishes: Platinum Diffused (P), and White (W) Flange Finish: Platinum Diffused(P), and White (W) Lamp: 9 Osram LEDs at 1.2W each are available in two different temperatures with dimmable capabilities down to 3%. Up to 560 lumens depending on color temperature and reflector. Kelvin Temperature: 3000K CCT Dimension: Aperture Diameter: 3-1/2", Outside Diameter: 5-1/2"

3-1/2" Aperture, 4200K Self Flanged Reflector LED Trim 4" LED trims offers affordable solutions for new technology along with energy savings. The LED trims come with a diffusing lens that minimizes brightness, while still providing optimal lighting distribution. With a quick connect attached the trim and housing, installation is made easy. Variety of Incandescent and Electronic Low Voltage Dimmers are compatible with Nora's LED trims. Incandescent dimmers have a minimum circuit load of 4 LED Recessed fixtures. Electronic Low Voltage dimmers do have a minimum load requirement. UL Listed for Wet Location UL Listed for Damp Location w/ Feed Through, Title 24 Compliant Reflector Finishes: Platinum Diffused (P), and White (W) Flange Finish:Platinum Diffused (P), and White (W) Three Year Limited Warranty Lamp: 9 Osram LEDs at 1.2W each are available in two different temperatures with dimmable capabilities down to 3%. Up to 560 lumens depending on color temperature and reflector. Kelvin Temperature: 4200K CCT Dimension: Aperture Diameter: 3-1/2", Outside Diameter: 5-1/2"

4" Miniature Housing for 120V MR16 - NO Transformer required Height: 5 ½", Ceiling Opening: 4 1/4" UL Listed for damp locations and feed through. These Line Voltage Housings are designed to use 50W max 120V MR16 lamps which is Compatible with Low Voltage MR16 trims below: Only works with 4" LOW voltage trims Lamp: 50W max 120V MR16 is Included

4" Low Voltage Non-IC Housing for Remodeling Models: LV4000R-4" Non-IC Housing for Remodeling LV4000RA-4" Non-IC Airtight Housing for Remodeling Thermally protected, listed for damp locations UL listed for feed-through branch circuit wiring. Integral 120V/12V AC 60Hz , pre-wired snap-out magnetic transformers. Dimmable with magnetic low-voltage dimmers. Remodeling housing models allow wiring below ceiling plane. J-box and transformer accessible through ceiling cut-out. 4-inch remodeling housings fit into tight 6-inch joist ceiling spaces. Airtight housings are Gasketed to prevent airflow through the housing from heating or cooling systems. Compliant with State of Washington restricted airflow requirements (WSEC Code) Non-IC units require 3-inch of clearance on all sides; IC units may be covered with insulation to conserve energy. Lamps sold separately. Dimension: Length: 14-1/2", Width: 4-5/8", Depth: 5-3/4" Cut Out: 4-3/8" Bulb: 50W MR16 Input Voltage: 120V Output Voltage: 12V

4" Low Voltage IC Housing for New Construction Models: LV4000IC-4" IC Housing for New Construction LV4000ICA-4" IC Airtight Housing for New Construction Thermally protected, listed for damp locations UL listed for feed-through branch circuit wiring. Integral 120V/12V AC 60Hz , pre-wired snap-out magnetic transformers. Dimmable with magnetic low-voltage dimmers. Remodeling housing models allow wiring below ceiling plane. J-box and transformer accessible through ceiling cut-out. 4-inch remodeling housings fit into tight 6-inch joist ceiling spaces. Airtight housings are Gasketed to prevent airflow through the housing from heating or cooling systems. Compliant with State of Washington restricted airflow requirements (WSEC Code) Non-IC units require 3-inch of clearance on all sides; IC units may be covered with insulation to conserve energy. Lamps sold separately. Dimension: Length: 12-1/4", Width: 7-3/4", Depth: 7" Cut Out: 4-3/8" Hanger Bars: Adjustment 14-1/2" to 24-1/2" Bulb: 50W MR16 Input Voltage: 120V Output Voltage: 12V

4" Low Voltage NON IC Housing for New Construction Model: LV4000B-4" Non-IC Universal Housing for New Construction LV4000BA-4" Non-IC Airtight Universal Housing for New Construction Thermally protected, listed for damp locations UL listed for feed-through branch circuit wiring. Integral 120V/12V AC 60Hz , pre-wired snap-out magnetic transformers. Dimmable with magnetic low-voltage dimmers. Remodeling housing models allow wiring below ceiling plane. J-box and transformer accessible through ceiling cut-out. 4-inch remodeling housings fit into tight 6-inch joist ceiling spaces. Airtight housings are Gasketed to prevent airflow through the housing from heating or cooling systems. Compliant with State of Washington restricted airflow requirements (WSEC Code) Non-IC units require 3-inch of clearance on all sides; IC units may be covered with insulation to conserve energy. Lamps sold separately. Dimension: Length: 10-1/2", Width: 5-1/4", Height: 5-1/2" Cut Out: 4-3/8" Hanger Bars: Adjustment 14-1/2" to 24-1/2" Bulb: 50W MR16 Input Voltage: 120V Output Voltage: 12V

TODD-Quick Adapt Low Voltage Pendant Round spherical frit glass shade. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Xenon Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 5-3/4",Width: 5-3/4",Height: 6-1/8" Bulb: Halogen JC Bi-Pin Included Input Voltage: 12/24V Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Glass Shade Finish:AR-Amaretto, MO-Mocha, RD-Red

JOLLY Quick Adapt Low Voltage Pendant- Glossy colored spherical glass with opal matte interior. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Xenon Bi-Pin 12V 50W lamp. Cable may be field-cut. Hand-blown in Europe. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 2-1/2", Height: 5-3/8" Bulb: Xenon Bi-Pin (Included) Input Voltage: 12/24V Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Glass Shade Finish:AM-Amber, VN-Vanilla, CB-Cobalt, CS-Chartreuse, EM-Emerald, RD-Red, TQ-Turquoise, OM-Opal Matte

BUBBLE-Quick Adapt Low Voltage Pendant The BUBBLE crystal shade is a brilliant contemporary styling and comes in a beautiful Wall Sconce design as well as a Quick Adapt Pendant. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Xenon Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 4-3/4",Height: 2-3/4" Bulb: Halogen JC Bi-Pin Included Input Voltage: 12/24V Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Crystal Glass Shade

BEEHAVE-Medium Quick Adapt Low Voltage Pendant Hand-Blown Barium Based Lead-Free Crystal Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Xenon Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 6",Height: 5-1/2" Bulb: Xenon Bi-Pin (Included) Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Glass Shade Finish:WN-Wine, TE-Teal, WH-White, CC-Chocolate, SM-Smoke

DORA-Quick Adapt Low Voltage Pendant Glossy colored domed glass with opal matte interior. Hand-blown in Europe. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Xenon Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 5", Height: 6-1/4" Bulb: Xenon Bi-Pin (Included) Input Voltage: 12/24V Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Glass Shade Finish:AM-Amber, CB-Cobalt, RD-Red, EM-Emerald, OM-Opal Matte, VN-Vanilla, TQ-Turquoise, CS-Chartreuse

FERN-Quick Adapt Low Voltage Pendant Cubical crystal shade with decorative cut-detailing. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Halogen Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 2-3/4" x 2-3/4", Height: 3" Bulb: Halogen JC Bi-Pin Included Input Voltage: 12/24V Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Crystal Shade

FLO-Quick Adapt Low Voltage Pendant-4-petal crystal shade. Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Halogen Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 4", Height: 5-7/8" Bulb: Halogen JC Bi-Pin Included Input Voltage: 12/24V Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Crystal Shade

SELMA-Quick Adapt Low voltage Pendant Conical cased glass Includes a Quick Adapt Jack, 8' cable, socket set (QASS18X), hang-straight tube and Halogen 50W Bi-Pin lamp. Cable may be field-cut. ETL Listed Fits the following mounting systems which can be selected from the Matching Components Below: May be used with Jesco Monorail Systems- (The Monorail Fixture Adapter MA-FA(sold separately) provides the connection between the Quick Adapt Pendant to the Monorail.) Standard Track Systems- (The Standard Track Adapter MA-TA-H (sold separately) enables the use of Quick Adapt Pendants in Standard, Line Voltage H-Track Systems. Includes a 50W electronic transformer. Dimmable with an electronic or standard incandescent dimmer.) Canopy mounted Monopoint/Multipoint Systems- (Quick Adapt Pendants may be directly mounted onto Monopoint or Multipoint canopies, which have built-in or remote transformer options- Quick Jack pendant) Dimension: Diameter: 5-1/4",Height: 3-3/4" Bulb: Halogen JC Bi-Pin Included Input Voltage: 12/24V Max Wattage: 50W Finish: Socket Finish: SN-Satin Nickel, CH-Chrome Glass Shade Finish:BU-Blue, RD-Red, WH-White, YW-Yellow