Skip to main content

Home/ Triway Woodworking/ Group items tagged project ideas

Rss Feed Group items tagged

Bryan Koppert

Workshop Organization Tips: The Family Handyman - 2 views

  • Project 1: Adjustable height sawhorses
    • Student One
       
      I like this idea.  We need some of these
    • Bryan Koppert
       
      You're right.  These would be pretty handy.  I'd like to see the feet pivot for easier/less-space-taking storage.
  • Project 3: Flip-through tool rack
    • Student One
       
      I also really like these.  This could possibly save use some wall space in the tool room.
    • Bryan Koppert
       
      These really could save a lot of space!  I like the wrench board; I could finally get all of the wrenches out of that unorganized drawer!  We'd have to make sure the wrenches can't easily fall off the "page", but I think I have an idea to solve that.
Bryan Koppert

Floating Shelves - Woodworking Projects - American Woodworker - 3 views

  • The secret was torsion-box construction. A torsion box is a simple grid of slender ribs glued between thin plywood skins. It makes these shelves stiff and flat, yet incredibly light. This rigid architecture means torsion-box shelves won’t sag or twist, and they can be mounted without any external support.
    • Student Three
       
      I've never tried this, but I'd like to.
  • 11. Clamp the three shelf components together without glue, so you can check the fit of the miter joints. Use plywood braces to support the upper shelf and hold everything square. 
  • 6. Rout the edges flush. Use a second shelf to support the router and a piece of scrap plywood as a spacer.
    • Student One
       
      This could be very helpful.
  •  
    A cool project idea.
Bryan Koppert

AW Extra 7/26/12 - 10 Techniques for Tighter, Faster, Stronger Miter Joints - Woodworki... - 6 views

  • Make micro adjustments with a disc sander
    • Bryan Koppert
       
      I've never seen this work as well as they claim it does.  If you don't do the same thing to all the pieces, the edges won't line up right.
    • Student One
       
      I tried this, even though you told me it wouldn't work very well.  You were right; it didn't work very well.  I rounded the miter a bit and made it worse.
  • Knock-off blocks for long miters
    • Bryan Koppert
       
      This is an interesting idea!  I want to try this.
  • Customize a drafting square
    • Bryan Koppert
       
      Not a bad idea, but I would still check the actual cut.  Practice piece!
  • ...8 more annotations...
  • Guides for perfect edging
    • Bryan Koppert
       
      We did something like this on Jack's molding.
  • Your finger can detect differences your eyes can’t.
    • Bryan Koppert
       
      Your finger can feel differences of less than a thousandth of an inch!  That is less than .001"!
  • Stop cutting creep
    • Bryan Koppert
       
      Interesting.  Don't wet it too much that you damage the piece.
  • The 60-second squeeze
    • Bryan Koppert
       
      I'd let the glue tack a little bit before putting the pieces together, but don't wait too long.
  • Notched blocks for no-rush glue-up
    • Bryan Koppert
       
      We have some of these.  Matt used them for his molding.
  • Grain match matters
    • Bryan Koppert
       
      Good idea, but it could increase waste.  The better look might be worth the waste.
  • Notched blocks for no-rush glue-up
  • Use hot water to soften any paper or glue left on the wood, then scrape it away and sand as usual. 
    • Student One
       
      I used too much water, and it weakened the joint.  One spot actually came apart.  I would recommend using hand tools to get rid of excess stuff.
    • Bryan Koppert
       
      I was afraid of that.  We have to remember that the normal wood glue we use is water soluble.  That's why for cutting boards or outside projects we have to use a different type of glue.
Bryan Koppert

How to Make a Trestle Table Part 1 - Design, Templates, Stock Preparation. and Domino J... - 1 views

  • Function First
    • Bryan Koppert
       
      It is always best to keep the actual function and purpose of the project in mind.  If it doesn't work, who cares how good it looks?
  • Trestle tables consist of three primary parts: the trestle legs, the cross member, and the top
Bryan Koppert

Hutches - 0 views

  • Hutches
    • Bryan Koppert
       
      Below are some pictures of various hutch designs.  You could use these for inspiration (not copying) for your own design.
1 - 5 of 5
Showing 20 items per page