Skip to main content

Home/ Triway Woodworking/ Group items tagged clamping

Rss Feed Group items tagged

Bryan Koppert

Making A Wooden Kant Twist Clamp - 2 views

    • Brevin Beckler
       
      These clamps are really cool. Im am making one.
    • Bryan Koppert
       
      Very interesting,  it'd be cool if you could bring yours in when you have it done.  I'd really like to see it.
Brevin Beckler

Fixing bar clamps from slipping - 3 views

  •  
    Have you tried this yet? It seems like it would make deeper grooves than the file does.
  •  
    I have tried this. It works, but it eventually needs redone, as all other methods I've tried. Thanks for looking into it.
Bryan Koppert

Floating Shelves - Woodworking Projects - American Woodworker - 3 views

  • The secret was torsion-box construction. A torsion box is a simple grid of slender ribs glued between thin plywood skins. It makes these shelves stiff and flat, yet incredibly light. This rigid architecture means torsion-box shelves won’t sag or twist, and they can be mounted without any external support.
    • Student Three
       
      I've never tried this, but I'd like to.
  • 11. Clamp the three shelf components together without glue, so you can check the fit of the miter joints. Use plywood braces to support the upper shelf and hold everything square. 
  • 6. Rout the edges flush. Use a second shelf to support the router and a piece of scrap plywood as a spacer.
    • Student One
       
      This could be very helpful.
  •  
    A cool project idea.
Bryan Koppert

AW Extra 7/26/12 - 10 Techniques for Tighter, Faster, Stronger Miter Joints - Woodworki... - 6 views

  • Make micro adjustments with a disc sander
    • Bryan Koppert
       
      I've never seen this work as well as they claim it does.  If you don't do the same thing to all the pieces, the edges won't line up right.
    • Student One
       
      I tried this, even though you told me it wouldn't work very well.  You were right; it didn't work very well.  I rounded the miter a bit and made it worse.
  • Knock-off blocks for long miters
    • Bryan Koppert
       
      This is an interesting idea!  I want to try this.
  • Customize a drafting square
    • Bryan Koppert
       
      Not a bad idea, but I would still check the actual cut.  Practice piece!
  • ...8 more annotations...
  • Guides for perfect edging
    • Bryan Koppert
       
      We did something like this on Jack's molding.
  • Your finger can detect differences your eyes can’t.
    • Bryan Koppert
       
      Your finger can feel differences of less than a thousandth of an inch!  That is less than .001"!
  • Stop cutting creep
    • Bryan Koppert
       
      Interesting.  Don't wet it too much that you damage the piece.
  • The 60-second squeeze
    • Bryan Koppert
       
      I'd let the glue tack a little bit before putting the pieces together, but don't wait too long.
  • Notched blocks for no-rush glue-up
    • Bryan Koppert
       
      We have some of these.  Matt used them for his molding.
  • Grain match matters
    • Bryan Koppert
       
      Good idea, but it could increase waste.  The better look might be worth the waste.
  • Notched blocks for no-rush glue-up
  • Use hot water to soften any paper or glue left on the wood, then scrape it away and sand as usual. 
    • Student One
       
      I used too much water, and it weakened the joint.  One spot actually came apart.  I would recommend using hand tools to get rid of excess stuff.
    • Bryan Koppert
       
      I was afraid of that.  We have to remember that the normal wood glue we use is water soluble.  That's why for cutting boards or outside projects we have to use a different type of glue.
Bryan Koppert

AW Extra 1/3/13 - 12 Techniques for Successful Gluing - Woodworking Techniques - Americ... - 1 views

  • 12 Techniques for Successful Gluing
    • Bryan Koppert
       
      I say these points over and over.
  • Check the glue
    • Bryan Koppert
       
      I take care of this.  Most of the time our glue is only a year old.  I check the glue that is older.
Bryan Koppert

How to Glue-Up Joints: Tips on gluing - Fine Woodworking - 0 views

  • After this, joints can be released from the clamps, but the full glue strength won’t develop for about 24 hours.
    • Bryan Koppert
       
      This is why I always say don't stress the joint for 24 hours.
  • Wet both surfaces
    • Bryan Koppert
       
      I've made these points before as well.
Bryan Koppert

Clamp Rack & Panel Saw - 0 views

    • Bryan Koppert
       
      If we made a panel saw like the one in the background, we wouldn't need to crosscut full sheets of plywood on the table saw anymore.
Brevin Beckler

Larry's clamp - 2 views

shared by Brevin Beckler on 13 May 14 - No Cached
  •  
    How to flatten boards without using cauls.
  •  
    Ok, you're right. That thing is awesome! Thanks for sharing!
1 - 8 of 8
Showing 20 items per page