Group items tagged

Machines talking to machines No doubt that the Olympics will have a profound effect in shaping London's future. By the time the Games begin, for instance, it will have Europe's largest free WiFi zone, with the city's iconic red phone booths converted, fittingly, into hotspots. But another opportunity London landed earlier this month could have just as much impact, perhaps more. A company called Living PlanIt announced that it will begin testing its "Urban Operating System" in the Greenwich section of the city. What does that mean? Put simply, London would have its own operating system, much as your PC runs on Windows or your Mac runs on Apple's IOS. This ties into the latest hot buzz phrase, "the internet of things," which describes a world where machines talk to other machines. No human interaction required. So, for a city, this means sensors in buildings would connect to sensors in water treatment plants which would connect to sensors in stoplights. It would be one gigantic, computerized urban nervous system, which a lot of experts think is the only way cities can survive a future when they'll contain more than two out of every three people on Earth. Based on what sensors reveal about the location and movement of humans in a section of a city, for instance, buildings will automatically adjust their temperatures, streetlights will dim or brighten, water flow will increase or slow. Or, in the event of a disaster, emergency services would have real-time access to traffic data, trauma unit availability, building blueprints. And soon enough, our smart phones will be able to tap in to the Urban OS. So will our household appliances. This is not some 21st century analogue of the personal jet pack. The Urban OS is the driving force behind a smart city being built from the ground up in northern Portugal. Construction is scheduled to be completed in three years; eventually it will have about 150,000 residents. It will also have more than 100 million sen

food safety test on a chip

"Three-axis distributed fiber optic strain measurement in 3D woven composite structures   Paper 8690-6 Time: 1:50 PM - 2:10 PM Author(s): Matt Castellucci, Evan M. Lally, Sandra Klute, Luna Innovations Inc. (United States); David Lowry, NASA Johnson Space Ctr. (United States) Hide Abstract Add to My Schedule  Recent advancements in composite materials technologies have broken further from traditional designs and require advanced instrumentation and analysis capabilities. Success or failure is highly dependent on design analysis and manufacturing processes. By monitoring smart structures throughout manufacturing and service life, residual and operational stresses can be assessed and structural damage identified. Composite smart structures can be manufactured by integrating fiber optic sensors into existing composite materials processes such as layup, filament winding and three-dimensional weaving. In this work optical fiber was integrated into 3D woven composite parts at a commercial woven products manufacturing facility. The fiber was then used to monitor the structures during a VARTM manufacturing process, and subsequent static and dynamic testing. Low cost telecommunications-grade optical fiber acts as the sensor using a high resolution commercial Optical Frequency Domain Reflectometer (OFDR) system providing distributed strain measurement at spatial resolutions as low as 2mm. Strain measurements using the optical fiber sensors are correlated to resistive strain gauge measurements during static structural loading."

spectrally encoded confocal microscopy (SECM)

Jonathan and Tibi, at Nori's house, testing the new Mosquito

" "basic" income that would go out to everyone, no strings attached; others a means-tested "minimum" income to supplement the earnings of the poor up to a given level."

"Centrifuges are commonly required devices in medical diagnostics facilities as well as scientific laboratories. Although there are commercial and open source centrifuges, the costs of the former and the required electricity to operate the latter limit accessibility in resource-constrained settings. There is a need for low-cost, human-powered, verified, and reliable lab-scale centrifuges. This study provides the designs for a low-cost 100% 3-D printed centrifuge, which can be fabricated on any low-cost RepRap-class (self-replicating rapid prototyper) fused filament fabrication (FFF)- or fused particle fabrication (FPF)-based 3-D printer. In addition, validation procedures are provided using a web camera and free and open source software. This paper provides the complete open source plans, including instructions for the fabrication and operation of a hand-powered centrifuge. This study successfully tested and validated the instrument, which can be operated anywhere in the world with no electricity inputs, obtaining a radial velocity of over 1750 rpm and over 50 N of relative centrifugal force. Using commercial filament, the instrument costs about U.S. $25, which is less than half of all commercially available systems. However, the costs can be dropped further using recycled plastics on open source systems for over 99% savings. The results are discussed in the context of resource-constrained medical and scientific facilities."

Work party for xyz piezo positioner

MarcT is connected to this project!!! We should interface with them for the value exchange sytem.  See also metacurrency project. 

design, make, test in in microelectronics, MEMS, microfluidics, photonics, and embedded systems.  in Canada