Group items tagged

Engineers at Stevens Institute of Technology have developed a technique to optically modulate the frequency of a laser beam and create a signal that is disrupted significantly less by environmental factors, says Dr. Rainer Martini. The research provides for enhanced optical communications, allowing mobile units not tied to fiber optic cable to communicate in the range of 100 GHz and beyond, the equivalent of 100 gigabytes of data per second. Eventually, the team hopes to extend the reach into the terahertz spectrum. The frequency or amplitude modulation of middle infrared quantum cascade lasers has been limited by electronics, which are barely capable of accepting frequencies of up to 10 GHz by switching a signal on and off.  Marini and his team have developed a method to optically induce fast amplitude modulation in a quantum cascade laser to control the laser's intensity. Their amplitude modulation system employed a second laser to modulate the amplitude of the middle infrared laser, using light to control light. The current detector is only capable of detecting frequencies up to 10 GHz, but Dr. Martini is confident that a new detector will make the system capable of much higher frequencies. With an optical system that is stable enough, satellites may one day convert to laser technology, resulting in a more mobile military and super-sensitive scanners, as well as faster Internet for the masses, says Martini. Ref.: "Optically induced fast wavelength modulation in a quantum cascade laser," Applied Physics Letters, July 7, 2010.

Researchers from Purdue University and colleagues are developing new technologies that combine a laser and electric fields to manipulate fluids and tiny particles such as bacteria, viruses, and DNA molecules for a wide range of potential applications, including medical diagnostics, testing food and water, crime-scene forensics, and pharmaceutical manufacturing.. This "hybrid optoelectric manipulation in microfluidics" technology could allow for innovative sensors and analytical devices for "lab-on-a-chip" applications, or miniature instruments that perform measurements normally requiring large laboratory equipment, the researchers said. The technology works by first using a red laser to position a droplet on a platform specially fabricated at Purdue. Next, a highly focused infrared laser is used to heat the droplets, and then electric fields cause the heated liquid to circulate in a "microfluidic vortex." This vortex is used to isolate specific types of particles in the circulating liquid, like a micro centrifuge. Particle concentrations replicate the size, location and shape of the infrared laser pattern. The technology can also be used in nanomanufacturing because it shows promise for the assembly of suspended particles (colloids), the researchers said. Ref.: Steven T. Wereley, et al., Hybrid opto-electric manipulation in microfluidics-opportunities and challenges, Lab on a Chip, 2011; 11 (13): 2135 [DOI: 10.1039/C1LC20208A]

In a world of rapidly accelerating change, from iPads to eBooks to genetic mapping to MagLev trains, we can't help but wonder if technology is our servant or our master, and whether it is taking us in a healthy direction as a society.* What forces drive the steady march of innovation?* How can we build environments in our schools, our businesses, and in our private lives that encourage the creation of new ideas--ideas that build on the new technology platforms in socially responsible ways?Kevin Kelly and Steven Johnson look at where technology is taking us. One of the co-founders of Wired Magazine, Kelly's new book, What Technology Wants, makes the argument that technology as a whole is not a jumble of wires and metal but a living, evolving organism that has its own unconscious needs and tendencies. Johnson's new book, Where Good Ideas Come From, explains why certain spaces, from 18th-century coffeehouses to the World Wide Web, have an uncanny talent for encouraging innovative thinking.

On July 29th, returning from a trip to Europe, Jacob Appelbaum, a lanky, unassuming 27-year-old wearing a black T-shirt with the slogan "Be the trouble you want to see in the world," was detained at customs by a posse of federal agents. In an interrogation room at Newark Liberty airport, he was grilled about his role in Wikileaks, the whistle-blower group that has exposed the government's most closely guarded intelligence reports about the war in Afghanistan. The agents photocopied his receipts, seized three of his cellphones - he owns more than a dozen - and confiscated his computer. They informed him that he was under government surveillance. They questioned him about the trove of 91,000 classified military documents that Wikileaks had released the week before, a leak that Vietnam-era activist Daniel Ellsberg called "the largest unauthorized disclosure since the Pentagon Papers." They demanded to know where Julian Assange, the founder of Wikileaks, was hiding. They pressed him on his opinions about the wars in Afghanistan and Iraq. Appelbaum refused to answer. Finally, after three hours, he was released. Sex, Drugs, and the Biggest Cybercrime of All Time Appelbaum is the only known American member of Wikileaks and the leading evangelist for the software program that helped make the leak possible. In a sense, he's a bizarro version of Mark Zuckerberg: If Facebook's ambition is to "make the world more open and connected," Appelbaum has dedicated his life to fighting for anonymity and privacy. An anarchist street kid raised by a heroin- addict father, he dropped out of high school, taught himself the intricacies of code and developed a healthy paranoia along the way. "I don't want to live in a world where everyone is watched all the time," he says. "I want to be left alone as much as possible. I don't want a data trail to tell a story that isn't true." We have transferred our most intimate and personal information - our bank accounts, e-mails, photographs, ph

In late 2009, Charles Robinson was able to interview Peter Joseph, the creator of Zeitgeist: The Movie, Zeitgeist: Addendum, Zeitgeist: Moving Forward, several lectures and a presentation; Founder of The Zeitgeist Movement and a friend of Jack Fresco, in his home. He described himself and his life in details in what is likely a rare interview. He was kind enough to provide him with previously unreleased media and video and in turn Charles did his best to create a documentary (albeit kinda poor in quality compared to his work!) that would help express who this person is. Peter Joseph was born in North Carolina to a middle class family. He has said in interviews that his mother's role as a social worker helped shape his opinion and impressions of American life. He later moved to New York to attend art school. Currently he lives and works in New York City as a freelance film editor/composer/producer for various industries. Due to the controversial content of his films and a desire to keep his day job private, he has not released his full name to the public.

Motion controllers used in gaming systems like the Nintendo Wii revolutionised how video games are played. But now a similar device that's more precise - and even works when an object is in its way - will let you try something more futuristic: making movies in virtual environments. Matt Bett and his team from Abertay University in the UK developed the new motion controller that uses electromagnetic sensors to track its 3D position. The location is then mapped in real time to a virtual video camera on a screen (see video above). By moving the controller around, the camera moves around the scene like a real camera on a rig or it can be fixed to a virtual tripod.

"In nineteenth‐century America, there was no such person as a "professional scientist." There were professionals and there were scientists, but they were very different. Professionals were men of science who engaged in commercial relations with private enterprises and took fees for their services. Scientists were men of science who rejected such commercial work and feared the corrupting influences of cash and capitalism. Professionals portrayed themselves as active and useful members of an entrepreneurial polity, while scientists styled themselves as crusading reformers, promoters of a purer science and a more research‐oriented university. It was this new ideology, embodied in these new institutions, that spurred these reformers to adopt a special name for themselves-"scientists." One object of this essay, then, is to explain the peculiar Gilded Age, American origins of that ubiquitous term. A larger goal is to explore the different social roles of the professional and the scientist. By attending to the particular vocabulary employed at the time, this essay tries to make clear why a "professional scientist" would have been a contradiction in terms for both the professional and the scientist in nineteenth‐century America. "

Microsoft has posted an awesome new concept video with some ubercool new interfaces that could be here in five to ten years, estimates Kurt DelBene, President, Microsoft Office Division. That sounds a bit conservative. "All of the ideas in the video are based on real technology," he said. "Some of the capabilities, such as speech recognition, real time collaboration, and data visualization, already exist today. Others are not yet available in specific products, but represent active research and development happening at Microsoft and other companies." "Other companies" … hmm, some of the concepts look a bit like Nokia's visionary Morph concept tech  (see the video at the bottom of this post and our 2010 news item).

Apply the electrodes... Externally modulating the brain's activity can boost its performance. The easiest way to manipulate the brain is through transcranial direct current stimulation (tDCS), which involves applying electrodes directly to the head to influence neuron activity with an electric current. Roi Cohen Kadosh's team at the University of Oxford showed last year that targeting tDCS at the brain's right parietal lobe can boost a person's arithmetic ability - the effects were still apparent six months after the tDCS session (newscientist.com/article/dn19679). More recently, Richard Chi and Allan Snyder at the University of Sydney, Australia, demonstrated that tDCS can improve a person's insight. The pair applied tDCS to volunteers' anterior frontal lobes - regions known to play a role in how we perceive the world - and found the participants were three times as likely as normal to complete a problem-solving task (newscientist.com/article/dn20080). Brain stimulation can also boost a person's learning abilities, according to Agnes Flöel's team at the University of Münster in Germany. Twenty minutes of tDCS to a part of the brain called the left perisylvian area was enough to speed up and improve language learning in a group of 19 volunteers (Journal of Cognitive Neuroscience, DOI: 10.1162/jocn.2008.20098). Using the same technique to stimulate the brain's motor cortex, meanwhile, can enhance a person's ability to learn a movement-based skill (Proceedings of the National Academy of Sciences, DOI: 10.1073/pnas.0805413106).

Imagine, Michael Chorost proposes, that four police officers on a drug raid are connected mentally in a way that allows them to sense what their colleagues are seeing and feeling. Tony Vittorio, the captain, is in the center room of the three-room drug den. He can sense that his partner Wilson, in the room on his left, is not feeling danger or arousal and thus has encountered no one. But suddenly Vittorio feels a distant thump on his chest. Sarsen, in the room on the right, has been hit with something, possibly a bullet fired from a gun with a silencer. Vittorio glimpses a flickering image of a metallic barrel pointed at Sarsen, who is projecting overwhelming shock and alarm. By deducing how far Sarsen might have gone into the room and where the gunman is likely to be standing, Vittorio fires shots into the wall that will, at the very least, distract the gunman and allow Sarsen to shoot back. Sarsen is saved; the gunman is dead. That scene, from his new book, "World Wide Mind," is an example of what Mr. Chorost sees as "the coming integration of humanity, machines, and the Internet." The prediction is conceptually feasible, he tells us, something that technology does not yet permit but that breaks no known physical laws.

Our new online intimacies create a world in which it makes sense to speak of a new state of the self, itself. "I am on my cell … online … instant messaging … on the Web"--these phrases suggest a new placement of the subject, wired into society t

A new new brain imaging system that can identify a subject's simple thoughts may lead to clearer diagnoses for Alzheimer's disease or schizophrenia - as well as possibly paving the way for reading people's minds. Michael Greicius at Stanford University in California and colleagues used functional magnetic resonance imaging (fMRI) to identify patterns of brain activity associated with different mental states. He asked 14 volunteers to do one of four tasks: sing songs silently to themselves; recall the events of the day; count backwards in threes; or simply relax. Participants were given a 10-minute period during which they had to do this. For the rest of that time they were free to think about whatever they liked. The participants' brains were scanned for the entire 10 minutes, and the patterns of connectivity associated with each task were teased out by computer algorithms that compared scans from several volunteers doing the same task. This differs from previous experiments, in which the subjects were required to perform mental activities at specific times and the scans were then compared with brain activity when they were at rest. Greicius reasons his method encourages "natural" brain activity more like that which occurs in normal thought.

October 24, 2008 - Google Tech Talks June 16, 2008 ABSTRACT Explore the brain's amazing ability to change throughout a person's life. This phenomenon-called neuroplasticty-is the science behind brain fitness, and it has been called one of the most extraordinary scientific discoveries of the 20th century. PBS had recently aired this special, The Brain Fitness Program, which explains the brain's complexities in a way that both scientists and people with no scientific background can appreciate. This is opportunity to learn more about how our minds work-and to find out more about the latest in cutting-edge brain research, from the founder of Posit Science and creator of the Brain Fitness Program software, Dr. Michael Merzenich. Speaker: Dr. Michael Merzenich, Ph.D. Michael M. Merzenich, PhD: Chief Scientific Officer Dr. Merzenich leads the company's scientific team. For more than three decades, Dr. Merzenich has been a leading pioneer in brain plasticity research. He is the Francis A. Sooy Professor at the Keck Center for Integrative Neurosciences at UCSF. Dr. Merzenich is a member of the National Academy of Sciences. He is the recipient of numerous awards and prizes, including the Ipsen Prize, Zulch Prize of the Max Planck Institute, Thomas Alva Edison Patent Award and Purkinje Medal. Dr. Merzenich has published more than 200 articles, including many in leading peer-reviewed journals, such as Science and Nature. His work is also often covered in the popular press, including the New York Times, the Wall Street Journal, Time and Newsweek. He has appeared on Sixty Minutes II, CBS Evening News and Good Morning America. In the late 1980s, Dr. Merzenich was on the team that invented the cochlear implant, now distributed by market leader Advanced Bionics. In 1996, Dr. Merzenich was the founding CEO of Scientific Learning Corporation (Nasdaq: SCIL), which markets and distributes software that applies principles of brain plasticity to assist children with language

RepRap is a free desktop 3D printer capable of printing plastic objects. Since many parts of RepRap are made from plastic and RepRap can print those parts, RepRap is a self-replicating machine - one that anyone can build given time and materials. It also means that - if you've got a RepRap - you can print lots of useful stuff, and you can print another RepRap for a friend...RepRap is about making self-replicating machines, and making them freely available for the benefit of everyone. We are using 3D printing to do this, but if you have other technologies that can copy themselves and that can be made freely available to all, then this is the place for you too.Reprap.org is a community project, which means you are welcome to edit most pages on this site, or better yet, create new pages of your own. Our community portal and New Development pages have more information on how to get involved. Use the links below and on the left to explore the site contents. You'll find some content translated into other languages.RepRap is described in the video on the right.

A startup called Quid has developed algorithms that analyze Internet-based data from corporations to make fast-moving technology developments visible, navigable, and understandable. Quid has built a data set combining information about firms that succeeded and sank, patent documents, government grants, help wanted advertisements, and tweets. Its algorithms use the collection of information to analyze the prospects of around 35,000 firms and research groups working on new technologies. By extracting words and phrases from the collected documents, Quid constructs a "technology genome" that describes the primary focus of each of those 35,000 entities. A map of the connections between those genomes can be used by investors to find hints about interesting companies or ideas. Most companies cluster around established sectors, but a few will sit in the white spaces between the clusters and can represent the seeds of new technology sectors.

Everyone has experienced a broken knob or a broken piece off of an appliance. You also know that while trying to get a new one you might have a long waiting period. Well there might be a prototype that is here to solve that problem. The Thing-O-Matic claims to manifest any three-dimensional plastic object in just minutes. The machine was shown first at a Las Vegas trade fair and is meant to make manufacturing more common for the average person.\n\n3,000 have already been sold at $790 a device. This model only makes plastic objects but the manufacturers say that in the future models could make metal and plastic models to make super cool gadgets. The machines make objects that are six by six by seven inches. The machine is not capable of making images but it does make boxes, tubes and get this- even action figures!

Social media present risks and benefits to children but parents who try to secretly monitor their kids' activities online are wasting their time, says Larry D. Rosen, Ph.D., professor of psychology at California State University, Dominguez Hills. Rosen identifies potential adverse effects of social media, including: Teens who use Facebook more often show more narcissistic tendencies, while young adults who have a strong Facebook presence show more signs of other psychological disorders, including antisocial behaviors, mania, and aggressive tendencies. Daily overuse of media and technology has a negative effect on the health of all children, especially preteens and teenagers, by making them more prone to anxiety, depression, and other psychological disorders, and making them more susceptible to future health problems. Facebook can be distracting and can negatively impact learning. Studies found that middle school, high school and college students who checked Facebook at least once during a 15-minute study period achieved lower grades. Rosen says new research has also found positive influences linked to social networking, including: Young adults who spend more time on Facebook are better at showing "virtual empathy" to their online friends. Online social networking can help introverted adolescents learn how to socialize. Social networking can provide tools for teaching in compelling ways that engage young students. "If you feel that you have to use some sort of computer program to surreptitiously monitor your child's social networking, you are wasting your time. Your child will find a workaround in a matter of minutes," he says. "You have to start talking about appropriate technology use early and often and build trust, so that when there is a problem, whether it is being bullied or seeing a disturbing image, your child will talk to you about it." Ref.: Larry D. Rosen, Poke Me: How Social Networks Can Both Help and Harm Our Kids, 2011; 119th Annua

(PhysOrg.com) -- A group of physicists working out of Chalmers University of Technology in Gothenburg, Sweden, have succeeded in proving what was until now, just theory; and that is, that visible photons could be produced from the virtual particles that have been thought to exist in a quantum vacuum. In a paper published on arXiv, the team describes how they used a specially created circuit called a superconducting quantum interference device (SQUID) to modulate a bit of wire length at a roughly five percent of the speed of light, to produce visible "sparks" from the nothingness of a vacuum.

This flu season, people with a fear of needles have an alternative. A new device made by PharmaJet uses spring tension to produce a high velocity jet of air to deliver medications and vaccines through the skin. Most people coming in for the flu shot at the Andover Senior Center still opted for the standard needle but the new way is gaining popularity. Nearly one third of those getting a vaccine chose the PharmaJet. (Video by Andre Malok/The Star-Ledger)