Group items tagged

Thirty-eight nationally recognized companies in the United States, including eleven Fortune 500 corporations, are collectively saving millions of dollars in electricity costs while reducing carbon emissions by tens of thousands of tons per year by using fuel cells, according to a new report by Fuel Cells 2000, a non-profit education and outreach organization. 

Think of them as big batteries, but ones that only operate when fuel—in this case, pure hydrogen—is supplied to them.

Fuel cell system costs have decreased significantly over the past several years but are still nearly twice as high as those for internal combustion engines. Likewise, onboard hydrogen storage costs are currently $15–$18/kWh for high-pressure gaseous storage, while the commercialization target is $2/kWh. There is potential to reduce this cost using lower-cost carbon fiber tanks or materials-based storage technologies, such as metal hydrides.

FCVs will have to offer consumers a viable alternative, especially in terms of performance, durability, and cost, to survive in this ultra-competitive market.

eothermal power plants do not burn fuel to generate electricity, so their emission levels are very low. They release less than 1% of the carbon dioxide emissions of a fossil fuel plant. Geothermal plants use scrubber systems to clean the air of hydrogen sulfide that is naturally found in the steam and hot water.

Geothermal plants emit 97% less acid rain-causing sulfur compounds than are emitted by fossil fuel plants. After the steam and water from a geothermal reservoir have been used, they are injected back into the Earth.

Emissions generated during the construction phase include exhaust from vehicular traffic and construction equipment, fugitive dust from traffic on paved and unpaved roads, and the release of geothermal fluid vapors (especially hydrogen sulfide, carbon dioxide, mercury, arsenic, and boron, if present in the reservoir). Activities such as site clearing and grading, power plant and pipeline system construction, and transmission line construction would have more intense exhaust-related emissions over a period of 2 to 10 years. Impacts would depend upon the amount, duration, location, and characteristics of the emissions and the meteorological conditions (e.g., wind speed and direction, precipitation, and relative humidity).

Most impacts to ecological resources (vegetation, wildlife, aquatic biota, special status species, and their habitats) would be low to moderate and localized during the construction phase (although impacts due to noise could be high). Activities such as site clearing and grading, road construction, power plant construction, ancillary facility construction, and vehicle traffic have the potential to affect ecological resources by disturbing habitat, increasing erosion and runoff, and creating noise at the project site. Impacts to vegetation include loss of native species and species diversity; increased risk of invasive species; increased risk of topsoil erosion and seed bank depletion; increased risk of fire; and alteration of water and seed dispersal.

Solid and industrial waste would be generated during construction activities. Much of the solid waste would be nonhazardous, consisting of containers and packaging materials, miscellaneous wastes from equipment assembly and presence of construction crews (food wrappers and scraps), and woody vegetation. Industrial wastes would include minor amounts of paints, coatings, and spent solvents. Most of these materials would likely be transported off-site for disposal.

ofuels can be derived from almost any type of "biomass," a broad term that refers to living or recently alive biological material. Because biomass is produced on a short time scale, it is considered a renewable resource. I will describe types of biofuels—ethanol, biodiesel, syngas, bio-hydrogen, biogas, and solid biofuel—and their use. I'll also identify the crops and wastes being used to produce biofuels, and some issues surrounding biofuel production. How are biofuels being used? Biofuels are already used to supply a small fraction of our energy needs, with significant opportunities to expand their use as infrastructure is developed. In addition to ethanol and biodiesel for transportation, biofuels are currently used for power production, heating and cooling of buildings, and the thermal needs of industry. Biomass is today the largest non-hydroelectric renewable source for electricity produced in the U.S. Most of this is produced in pulp and paper mills, which often generate electricity by burning wood chips, bark, or the sludges and "liquors" that are byproducts of the paper-making process. At the same time, they recover waste heat from electricity generation to meet the thermal needs of the mill. This highly efficient combination is referred to as combined heat and power (CHP) or cogeneration. The electricity generated may be used onsite and/or supplied to the local utility for distribution to the public.

Solar energy originates in the depths of our sun. The sun endures a continuous stream of thermonuclear explosions as hydrogen atoms are fused into helium atoms. We encounter the resultant energy as radiation that strikes the surface of the earth.

Advantages: Geothermal energy cost is extremely low compared to many other energy sources. It has low pollution compared to fossil fuels and nuclear energy. Geothermal energy is a renewable energy source. Almost no environmental impact when using geothermal heat from nuclear decay. Geothermal heat pump systems can reduce your energy use storing heat from the summer/sun and makes use of it in the night and winter. Low maintenance systems.

Disadvantages: The most important disadvantage is absolutely the geological problem.  The heat source is mostly close to volcanic activity of some sort. Chemicals are byproducts of the production electricity with hot ground water. Some geothermal plants use a lot of water and it needs to go somewhere its after use. Some of the poluting chemicals in that water and steam are sulfur, mercury, hydrogen sulfide, arsenic, ammonia. Earth is a changing creature.  A drilled hole in the ground could supply thousands of homes heat and one earthquake could change that in a second.  It can also change gradually over time. Location, location, location.  That is certainly true of geothermal energy.  It cannot be transported over vast distances.  If used to heat up houses or for hot tap water it is only the quality of the pipe that delivers the water that determines how far it can go and if it will be of any use when it arrives. If the heat is used for electrical production it helps to have plants close so the energy loss is not too great. 

Corrosion is a big problem.  Composition of the chemicals can vary but it is always a problem.  It is among other the reason they need to heat up clean water to use and do not use it directly in to heating of houses.  In cases it has been used directly it causes pipes to corrode. In nuclear heating rock the rock cools down over few decades and hundreds of years are needed to get initial heating back.  Power stations of that sort are therefore not considered as profitable. Geothermal Heat pump systems do have high installation cost. Some areas run out of water or run low on ground water during seasonal dry spells. Less water means less heat and less energy to produce. Some drilling sites are too hot to handle.  Yea. Drillers have actually tried and tried some holes and they just can’t get the needed equipment in because the holes shoot it out like guns.   With workers running to stay alive while steel rains down on them. 

There were 140,000 fuel cell stacks shipped globally in 2010

although, as of 2010, no public company in the industry had yet become profitable

PEM Fuel Cell Applications

Bio fuels are a viable alternative to fossil fuels.

Some examples are that of biodiesel, which entails growing crops that contain high amounts of natural oil then through a process of hydrogenation or refining a more compatible bio diesel, substitute is created.

These are examples of first generation biofuels and due to their nature they may or may not be long-term economically or environmentally viable.