Skip to main content

Home/ Larvata/ Group items tagged traffic

Rss Feed Group items tagged

Filter: All | Bookmarks | Topics Simple Middle
張 旭

Ingress - Kubernetes - 0 views

kubernetes.io/...ingress

kubernetes networking network ingress

shared by 張 旭 on 04 Jul 19 - No Cached
  • An API object that manages external access to the services in a cluster, typically HTTP.
  • load balancing
  • SSL termination
  • ...62 more annotations...
  • name-based virtual hosting
  • Edge routerA router that enforces the firewall policy for your cluster.
  • Cluster networkA set of links, logical or physical, that facilitate communication within a cluster according to the Kubernetes networking model.
  • A Kubernetes ServiceA way to expose an application running on a set of Pods as a network service. that identifies a set of Pods using labelTags objects with identifying attributes that are meaningful and relevant to users. selectors.
  • Services are assumed to have virtual IPs only routable within the cluster network.
  • Ingress exposes HTTP and HTTPS routes from outside the cluster to services within the cluster.
  • Traffic routing is controlled by rules defined on the Ingress resource.
  • An Ingress can be configured to give Services externally-reachable URLs, load balance traffic, terminate SSL / TLS, and offer name based virtual hosting.
  • Exposing services other than HTTP and HTTPS to the internet typically uses a service of type Service.Type=NodePort or Service.Type=LoadBalancer.
  • You must have an ingress controller to satisfy an Ingress. Only creating an Ingress resource has no effect.
  • As with all other Kubernetes resources, an Ingress needs apiVersion, kind, and metadata fields
  • Ingress frequently uses annotations to configure some options depending on the Ingress controller,
  • Ingress resource only supports rules for directing HTTP traffic.
  • An optional host.
  • A list of paths
  • A backend is a combination of Service and port names
  • has an associated backend
  • Both the host and path must match the content of an incoming request before the load balancer directs traffic to the referenced Service.
  • HTTP (and HTTPS) requests to the Ingress that matches the host and path of the rule are sent to the listed backend.
  • A default backend is often configured in an Ingress controller to service any requests that do not match a path in the spec.
  • An Ingress with no rules sends all traffic to a single default backend.
  • Ingress controllers and load balancers may take a minute or two to allocate an IP address.
  • A fanout configuration routes traffic from a single IP address to more than one Service, based on the HTTP URI being requested.
  • nginx.ingress.kubernetes.io/rewrite-target: /
  • describe ingress
  • get ingress
  • Name-based virtual hosts support routing HTTP traffic to multiple host names at the same IP address.
  • route requests based on the Host header.
  • an Ingress resource without any hosts defined in the rules, then any web traffic to the IP address of your Ingress controller can be matched without a name based virtual host being required.
  • secure an Ingress by specifying a SecretStores sensitive information, such as passwords, OAuth tokens, and ssh keys. that contains a TLS private key and certificate.
  • Currently the Ingress only supports a single TLS port, 443, and assumes TLS termination.
  • An Ingress controller is bootstrapped with some load balancing policy settings that it applies to all Ingress, such as the load balancing algorithm, backend weight scheme, and others.
  • persistent sessions, dynamic weights) are not yet exposed through the Ingress. You can instead get these features through the load balancer used for a Service.
  • review the controller specific documentation to see how they handle health checks
  • edit ingress
  • After you save your changes, kubectl updates the resource in the API server, which tells the Ingress controller to reconfigure the load balancer.
  • kubectl replace -f on a modified Ingress YAML file.
  • Node: A worker machine in Kubernetes, part of a cluster.
  • in most common Kubernetes deployments, nodes in the cluster are not part of the public internet.
  • Edge router: A router that enforces the firewall policy for your cluster.
  • a gateway managed by a cloud provider or a physical piece of hardware.
  • Cluster network: A set of links, logical or physical, that facilitate communication within a cluster according to the Kubernetes networking model.
  • Service: A Kubernetes Service that identifies a set of Pods using label selectors.
  • An Ingress may be configured to give Services externally-reachable URLs, load balance traffic, terminate SSL / TLS, and offer name-based virtual hosting.
  • An Ingress does not expose arbitrary ports or protocols.
  • You must have an Ingress controller to satisfy an Ingress. Only creating an Ingress resource has no effect.
  • The name of an Ingress object must be a valid DNS subdomain name
  • The Ingress spec has all the information needed to configure a load balancer or proxy server.
  • Ingress resource only supports rules for directing HTTP(S) traffic.
  • An Ingress with no rules sends all traffic to a single default backend and .spec.defaultBackend is the backend that should handle requests in that case.
  • If defaultBackend is not set, the handling of requests that do not match any of the rules will be up to the ingress controller
  • A common usage for a Resource backend is to ingress data to an object storage backend with static assets.
  • Exact: Matches the URL path exactly and with case sensitivity.
  • Prefix: Matches based on a URL path prefix split by /. Matching is case sensitive and done on a path element by element basis.
  • multiple paths within an Ingress will match a request. In those cases precedence will be given first to the longest matching path.
  • Hosts can be precise matches (for example “foo.bar.com”) or a wildcard (for example “*.foo.com”).
  • No match, wildcard only covers a single DNS label
  • Each Ingress should specify a class, a reference to an IngressClass resource that contains additional configuration including the name of the controller that should implement the class.
  • secure an Ingress by specifying a Secret that contains a TLS private key and certificate.
  • The Ingress resource only supports a single TLS port, 443, and assumes TLS termination at the ingress point (traffic to the Service and its Pods is in plaintext).
  • TLS will not work on the default rule because the certificates would have to be issued for all the possible sub-domains.
  • hosts in the tls section need to explicitly match the host in the rules section.
張 旭

VPCs and Subnets - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...VPC_Subnets.html

aws networking amazon cloud

shared by 張 旭 on 31 Jul 18 - No Cached
  • you must specify a range of IPv4 addresses for the VPC in the form of a Classless Inter-Domain Routing (CIDR) block
  • A VPC spans all the Availability Zones in the region
  • add one or more subnets in each Availability Zone.
  • ...19 more annotations...
  • Each subnet must reside entirely within one Availability Zone and cannot span zones.
  • Availability Zones are distinct locations that are engineered to be isolated from failures in other Availability Zones
  • If a subnet's traffic is routed to an internet gateway, the subnet is known as a public subnet.
  • If a subnet doesn't have a route to the internet gateway, the subnet is known as a private subnet.
  • If a subnet doesn't have a route to the internet gateway, but has its traffic routed to a virtual private gateway for a VPN connection, the subnet is known as a VPN-only subnet.
  • By default, all VPCs and subnets must have IPv4 CIDR blocks—you can't change this behavior.
  • The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses).
  • The first four IP addresses and the last IP address in each subnet CIDR block are not available for you to use
  • The allowed block size is between a /28 netmask and /16 netmask
  • The CIDR block must not overlap with any existing CIDR block that's associated with the VPC.
  • Each subnet must be associated with a route table
  • Every subnet that you create is automatically associated with the main route table for the VPC
  • Security groups control inbound and outbound traffic for your instances
  • network ACLs control inbound and outbound traffic for your subnets
  • each subnet must be associated with a network ACL
  • You can create a flow log on your VPC or subnet to capture the traffic that flows to and from the network interfaces in your VPC or subnet.
  • A VPC peering connection enables you to route traffic between the VPCs using private IP addresses
  • you cannot create a VPC peering connection between VPCs that have overlapping CIDR blocks
  • recommend that you create a VPC with a CIDR range large enough for expected future growth, but not one that overlaps with current or expected future subnets anywhere in your corporate or home network, or that overlaps with current or future VPCs
張 旭

What Is Amazon VPC? - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...VPC_Introduction.html

aws networking

shared by 張 旭 on 31 Jul 18 - No Cached
  • to allow an instance in your VPC to initiate outbound connections to the internet but prevent unsolicited inbound connections from the internet, you can use a network address translation (NAT) device for IPv4 traffic
  • A NAT device has an Elastic IP address and is connected to the internet through an internet gateway.
  • By default, each instance that you launch into a nondefault subnet has a private IPv4 address, but no public IPv4 address, unless you specifically assign one at launch, or you modify the subnet's public IP address attribute.
  • ...11 more annotations...
  • Amazon VPC is the networking layer for Amazon EC2.
  • A virtual private cloud (VPC) is a virtual network dedicated to your AWS account. It is logically isolated from other virtual networks in the AWS Cloud.
  • Instances can connect to the internet over IPv6 through an internet gateway
  • IPv6 traffic is separate from IPv4 traffic; your route tables must include separate routes for IPv6 traffic.
  • You can optionally connect your VPC to your own corporate data center using an IPsec AWS managed VPN connection, making the AWS Cloud an extension of your data center.
  • A VPN connection consists of a virtual private gateway attached to your VPC and a customer gateway located in your data center.
  • A virtual private gateway is the VPN concentrator on the Amazon side of the VPN connection. A customer gateway is a physical device or software appliance on your side of the VPN connection.
  • AWS PrivateLink is a highly available, scalable technology that enables you to privately connect your VPC to supported AWS services, services hosted by other AWS accounts (VPC endpoint services)
  • Traffic between your VPC and the service does not leave the Amazon network
  • To use AWS PrivateLink, create an interface VPC endpoint for a service in your VPC. This creates an elastic network interface in your subnet with a private IP address that serves as an entry point for traffic destined to the service.
  • create your own AWS PrivateLink-powered service (endpoint service) and enable other AWS customers to access your service.
張 旭

What is Kubernetes Ingress? | IBM - 0 views

www.ibm.com/...kubernetes-ingress

kubernetes networking

shared by 張 旭 on 27 Aug 21 - No Cached
  • expose an application to the outside of your Kubernetes cluster,
  • ClusterIP, NodePort, LoadBalancer, and Ingress.
  • A service is essentially a frontend for your application that automatically reroutes traffic to available pods in an evenly distributed way.
  • ...23 more annotations...
  • Services are an abstract way of exposing an application running on a set of pods as a network service.
  • Pods are immutable, which means that when they die, they are not resurrected. The Kubernetes cluster creates new pods in the same node or in a new node once a pod dies. 
  • A service provides a single point of access from outside the Kubernetes cluster and allows you to dynamically access a group of replica pods. 
  • For internal application access within a Kubernetes cluster, ClusterIP is the preferred method
  • To expose a service to external network requests, NodePort, LoadBalancer, and Ingress are possible options.
  • Kubernetes Ingress is an API object that provides routing rules to manage external users' access to the services in a Kubernetes cluster, typically via HTTPS/HTTP.
  • content-based routing, support for multiple protocols, and authentication.
  • Ingress is made up of an Ingress API object and the Ingress Controller.
  • Kubernetes Ingress is an API object that describes the desired state for exposing services to the outside of the Kubernetes cluster.
  • An Ingress Controller reads and processes the Ingress Resource information and usually runs as pods within the Kubernetes cluster.  
  • If Kubernetes Ingress is the API object that provides routing rules to manage external access to services, Ingress Controller is the actual implementation of the Ingress API.
  • The Ingress Controller is usually a load balancer for routing external traffic to your Kubernetes cluster and is responsible for L4-L7 Network Services. 
  • Layer 7 (L7) refers to the application level of the OSI stack—external connections load-balanced across pods, based on requests.
  • if Kubernetes Ingress is a computer, then Ingress Controller is a programmer using the computer and taking action.
  • Ingress Rules are a set of rules for processing inbound HTTP traffic. An Ingress with no rules sends all traffic to a single default backend service. 
  • the Ingress Controller is an application that runs in a Kubernetes cluster and configures an HTTP load balancer according to Ingress Resources.
  • The load balancer can be a software load balancer running in the cluster or a hardware or cloud load balancer running externally.
  • ClusterIP is the preferred option for internal service access and uses an internal IP address to access the service
  • A NodePort is a virtual machine (VM) used to expose a service on a Static Port number.
  • a NodePort would be used to expose a single service (with no load-balancing requirements for multiple services).
  • Ingress enables you to consolidate the traffic-routing rules into a single resource and runs as part of a Kubernetes cluster.
  • An application is accessed from the Internet via Port 80 (HTTP) or Port 443 (HTTPS), and Ingress is an object that allows access to your Kubernetes services from outside the Kubernetes cluster. 
  • To implement Ingress, you need to configure an Ingress Controller in your cluster—it is responsible for processing Ingress Resource information and allowing traffic based on the Ingress Rules.
張 旭

NAT Gateways - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...vpc-nat-gateway.html

aws networking system amazon cloud

shared by 張 旭 on 10 Jul 18 - No Cached
  • a network address translation (NAT) gateway to enable instances in a private subnet to connect to the internet or other AWS services
  • but prevent the internet from initiating a connection with those instances
  • NAT gateways are not supported for IPv6 traffic
  • ...11 more annotations...
  • must specify the public subnet in which the NAT gateway should reside
  • update the route table associated with one or more of your private subnets to point Internet-bound traffic to the NAT gateway.
  • NAT gateway is created in a specific Availability Zone and implemented with redundancy in that zone.
  • ensure that resources use the NAT gateway in the same Availability Zone
  • The main route table sends internet traffic from the instances in the private subnet to the NAT gateway. The NAT gateway sends the traffic to the internet gateway using the NAT gateway’s Elastic IP address as the source IP address
  • A NAT gateway supports 5 Gbps of bandwidth and automatically scales up to 45 Gbps
  • You can associate exactly one Elastic IP address with a NAT gateway
  • A NAT gateway supports the following protocols: TCP, UDP, and ICMP
  • cannot associate a security group with a NAT gateway.
  • create a NAT gateway in the same subnet as your NAT instance, and then replace the existing route in your route table that points to the NAT instance with a route that points to the NAT gateway
  • A NAT gateway cannot send traffic over VPC endpoints, VPN connections, AWS Direct Connect, or VPC peering connections.
張 旭

Home · sysown/proxysql Wiki - 0 views

github.com/wiki

mysql database cluster mariadb proxy

shared by 張 旭 on 19 Nov 18 - No Cached
  • bear in mind that the best way to configure ProxySQL is through its admin interface.
  • llow you to control the list of the backend servers, how traffic is routed to them, and other important settings (such as caching, access control, etc)
  • Once you've made modifications to the in-memory data structure, you must load the new configuration to the runtime, or persist the new settings to disk
  • ...4 more annotations...
  • mysql_variables: contains global variables that control the functionality for handling the incoming MySQL traffic.
  • mysql_users: contains rows for the mysql_users table from the admin interface. Basically, these define the users which can connect to the proxy, and the users with which the proxy can connect to the backend servers.
  • mysql_servers: contains rows for the mysql_servers table from the admin interface. Basically, these define the backend servers towards which the incoming MySQL traffic is routed.
  • mysql_query_rules: contains rows for the mysql_query_rules table from the admin interface. Basically, these define the rules used to classify and route the incoming MySQL traffic, according to various criteria (patterns matched, user used to run the query, etc.).
張 旭

Internet Gateways - Amazon Virtual Private Cloud - 0 views

docs.aws.amazon.com/...VPC_Internet_Gateway.html

aws networking system

shared by 張 旭 on 10 Jul 18 - No Cached
  • to provide a target in your VPC route tables for internet-routable traffic
  • to perform network address translation (NAT) for instances that have been assigned public IPv4 addresses
  • Ensure that instances in your subnet have a globally unique IP address (public IPv4 address, Elastic IP address, or IPv6 address)
  • ...10 more annotations...
  • To use an internet gateway, your subnet's route table must contain a route that directs internet-bound traffic to the internet gateway.
  • If your subnet is associated with a route table that has a route to an internet gateway, it's known as a public subnet.
  • To enable communication over the internet for IPv4, your instance must have a public IPv4 address or an Elastic IP address that's associated with a private IPv4 address on your instance.
  • Your instance is only aware of the private (internal) IP address space defined within the VPC and subnet
  • internet gateway logically provides the one-to-one NAT on behalf of your instance
  • To enable communication over the internet for IPv6, your VPC and subnet must have an associated IPv6 CIDR block, and your instance must be assigned an IPv6 address from the range of the subnet.
  • When you create a subnet, we automatically associate it with the main route table for the VPC.
  • the main route table doesn't contain a route to an internet gateway
  • Each instance that you launch into a VPC is automatically associated with its default security group.
  • a default security group allow no inbound traffic from the internet and allow all outbound traffic to the internet.
張 旭

Kubernetes Deployments: The Ultimate Guide - Semaphore - 1 views

semaphoreci.com/...kubernetes-deployment

docker kubernetes devops system

shared by 張 旭 on 21 Oct 19 - No Cached
  • Continuous integration gives you confidence in your code. To extend that confidence to the release process, your deployment operations need to come with a safety belt.
  • these Kubernetes objects ensure that you can progressively deploy, roll back and scale your applications without downtime.
  • A pod is just a group of containers (it can be a group of one container) that run on the same machine, and share a few things together.
  • ...34 more annotations...
  • the containers within a pod can communicate with each other over localhost
  • From a network perspective, all the processes in these containers are local.
  • we can never create a standalone container: the closest we can do is create a pod, with a single container in it.
  • Kubernetes is a declarative system (by opposition to imperative systems).
  • All we can do, is describe what we want to have, and wait for Kubernetes to take action to reconcile what we have, with what we want to have.
  • In other words, we can say, “I would like a 40-feet long blue container with yellow doors“, and Kubernetes will find such a container for us. If it doesn’t exist, it will build it; if there is already one but it’s green with red doors, it will paint it for us; if there is already a container of the right size and color, Kubernetes will do nothing, since what we have already matches what we want.
  • The specification of a replica set looks very much like the specification of a pod, except that it carries a number, indicating how many replicas
  • What happens if we change that definition? Suddenly, there are zero pods matching the new specification.
  • the creation of new pods could happen in a more gradual manner.
  • the specification for a deployment looks very much like the one for a replica set: it features a pod specification, and a number of replicas.
  • Deployments, however, don’t create or delete pods directly.
  • When we update a deployment and adjust the number of replicas, it passes that update down to the replica set.
  • When we update the pod specification, the deployment creates a new replica set with the updated pod specification. That replica set has an initial size of zero. Then, the size of that replica set is progressively increased, while decreasing the size of the other replica set.
  • we are going to fade in (turn up the volume) on the new replica set, while we fade out (turn down the volume) on the old one.
  • During the whole process, requests are sent to pods of both the old and new replica sets, without any downtime for our users.
  • A readiness probe is a test that we add to a container specification.
  • Kubernetes supports three ways of implementing readiness probes:Running a command inside a container;Making an HTTP(S) request against a container; orOpening a TCP socket against a container.
  • When we roll out a new version, Kubernetes will wait for the new pod to mark itself as “ready” before moving on to the next one.
  • If there is no readiness probe, then the container is considered as ready, as long as it could be started.
  • MaxSurge indicates how many extra pods we are willing to run during a rolling update, while MaxUnavailable indicates how many pods we can lose during the rolling update.
  • Setting MaxUnavailable to 0 means, “do not shutdown any old pod before a new one is up and ready to serve traffic“.
  • Setting MaxSurge to 100% means, “immediately start all the new pods“, implying that we have enough spare capacity on our cluster, and that we want to go as fast as possible.
  • kubectl rollout undo deployment web
  • the replica set doesn’t look at the pods’ specifications, but only at their labels.
  • A replica set contains a selector, which is a logical expression that “selects” (just like a SELECT query in SQL) a number of pods.
  • it is absolutely possible to manually create pods with these labels, but running a different image (or with different settings), and fool our replica set.
  • Selectors are also used by services, which act as the load balancers for Kubernetes traffic, internal and external.
  • internal IP address (denoted by the name ClusterIP)
  • during a rollout, the deployment doesn’t reconfigure or inform the load balancer that pods are started and stopped. It happens automatically through the selector of the service associated to the load balancer.
  • a pod is added as a valid endpoint for a service only if all its containers pass their readiness check. In other words, a pod starts receiving traffic only once it’s actually ready for it.
  • In blue/green deployment, we want to instantly switch over all the traffic from the old version to the new, instead of doing it progressively
  • We can achieve blue/green deployment by creating multiple deployments (in the Kubernetes sense), and then switching from one to another by changing the selector of our service
  • kubectl label pods -l app=blue,version=v1.5 status=enabled
  • kubectl label pods -l app=blue,version=v1.4 status-
  • 張 旭 on 21 Oct 19
     
    "Continuous integration gives you confidence in your code. To extend that confidence to the release process, your deployment operations need to come with a safety belt."
張 旭

Let's Encrypt & Docker - Træfik - 0 views

docs.traefik.io/...docker-and-lets-encrypt

traefik docker networking proxy

shared by 張 旭 on 19 Sep 18 - No Cached
  • automatically discover any services on the Docker host and let Træfik reconfigure itself automatically when containers get created (or shut down) so HTTP traffic can be routed accordingly.
  • use Træfik as a layer-7 load balancer with SSL termination for a set of micro-services used to run a web application.
  • Docker containers can only communicate with each other over TCP when they share at least one network.
  • ...15 more annotations...
  • Docker under the hood creates IPTable rules so containers can't reach other containers unless you'd want to
  • Træfik can listen to Docker events and reconfigure its own internal configuration when containers are created (or shut down).
  • Enable the Docker provider and listen for container events on the Docker unix socket we've mounted earlier.
  • Enable automatic request and configuration of SSL certificates using Let's Encrypt. These certificates will be stored in the acme.json file, which you can back-up yourself and store off-premises.
  • there isn't a single container that has any published ports to the host -- everything is routed through Docker networks.
  • Thanks to Docker labels, we can tell Træfik how to create its internal routing configuration.
  • container labels and service labels
  • With the traefik.enable label, we tell Træfik to include this container in its internal configuration.
  • tell Træfik to use the web network to route HTTP traffic to this container.
  • Service labels allow managing many routes for the same container.
  • When both container labels and service labels are defined, container labels are just used as default values for missing service labels but no frontend/backend are going to be defined only with these labels.
  • In the example, two service names are defined : basic and admin. They allow creating two frontends and two backends.
  • Always specify the correct port where the container expects HTTP traffic using traefik.port label.
  • all containers that are placed in the same network as Træfik will automatically be reachable from the outside world
  • With the traefik.frontend.auth.basic label, it's possible for Træfik to provide a HTTP basic-auth challenge for the endpoints you provide the label for.
張 旭

An Introduction to HAProxy and Load Balancing Concepts | DigitalOcean - 0 views

www.digitalocean.com/...xy-and-load-balancing-concepts

server haproxy loading HA architecture

shared by 張 旭 on 07 Dec 17 - No Cached
  • HAProxy, which stands for High Availability Proxy
  • improve the performance and reliability of a server environment by distributing the workload across multiple servers (e.g. web, application, database).
  • ACLs are used to test some condition and perform an action (e.g. select a server, or block a request) based on the test result.
  • ...28 more annotations...
  • Access Control List (ACL)
  • ACLs allows flexible network traffic forwarding based on a variety of factors like pattern-matching and the number of connections to a backend
  • A backend is a set of servers that receives forwarded requests
  • adding more servers to your backend will increase your potential load capacity by spreading the load over multiple servers
  • mode http specifies that layer 7 proxying will be used
  • specifies the load balancing algorithm
  • health checks
  • A frontend defines how requests should be forwarded to backends
  • use_backend rules, which define which backends to use depending on which ACL conditions are matched, and/or a default_backend rule that handles every other case
  • A frontend can be configured to various types of network traffic
  • Load balancing this way will forward user traffic based on IP range and port
  • Generally, all of the servers in the web-backend should be serving identical content--otherwise the user might receive inconsistent content.
  • Using layer 7 allows the load balancer to forward requests to different backend servers based on the content of the user's request.
  • allows you to run multiple web application servers under the same domain and port
  • acl url_blog path_beg /blog matches a request if the path of the user's request begins with /blog.
  • Round Robin selects servers in turns
  • Selects the server with the least number of connections--it is recommended for longer sessions
  • This selects which server to use based on a hash of the source IP
  • ensure that a user will connect to the same server
  • require that a user continues to connect to the same backend server. This persistence is achieved through sticky sessions, using the appsession parameter in the backend that requires it.
  • HAProxy uses health checks to determine if a backend server is available to process requests.
  • The default health check is to try to establish a TCP connection to the server
  • If a server fails a health check, and therefore is unable to serve requests, it is automatically disabled in the backend
  • For certain types of backends, like database servers in certain situations, the default health check is insufficient to determine whether a server is still healthy.
  • However, your load balancer is a single point of failure in these setups; if it goes down or gets overwhelmed with requests, it can cause high latency or downtime for your service.
  • A high availability (HA) setup is an infrastructure without a single point of failure
  • a static IP address that can be remapped from one server to another.
  • If that load balancer fails, your failover mechanism will detect it and automatically reassign the IP address to one of the passive servers.
張 旭

ALB vs ELB | Differences Between an ELB and an ALB on AWS | Sumo Logic - 0 views

www.sumologic.com/...aws-elb-alb

aws HA proxy

shared by 張 旭 on 06 Apr 21 - No Cached
  • If you use AWS, you have two load-balancing options: ELB and ALB.
  • An ELB is a software-based load balancer which can be set up and configured in front of a collection of AWS Elastic Compute (EC2) instances.
  • The load balancer serves as a single entry point for consumers of the EC2 instances and distributes incoming traffic across all machines available to receive requests.
  • ...14 more annotations...
  • the ELB also performs a vital role in improving the fault tolerance of the services which it fronts.
  • he Open Systems Interconnection Model, or OSI Model, is a conceptual model which is used to facilitate communications between different computing systems.
  • Layer 1 is the physical layer, and represents the physical medium across which the request is sent.
  • Layer 2 describes the data link layer
  • Layer 3 (the network layer)
  • Layer 7, which serves the application layer.
  • The Classic ELB operates at Layer 4. Layer 4 represents the transport layer, and is controlled by the protocol being used to transmit the request.
  • A network device, of which the Classic ELB is an example, reads the protocol and port of the incoming request, and then routes it to one or more backend servers.
  • the ALB operates at Layer 7. Layer 7 represents the application layer, and as such allows for the redirection of traffic based on the content of the request.
  • Whereas a request to a specific URL backed by a Classic ELB would only enable routing to a particular pool of homogeneous servers, the ALB can route based on the content of the URL, and direct to a specific subgroup of backing servers existing in a heterogeneous collection registered with the load balancer.
  • The Classic ELB is a simple load balancer, is easy to configure
  • As organizations move towards microservice architecture or adopt a container-based infrastructure, the ability to merely map a single address to a specific service becomes more complicated and harder to maintain.
  • the ALB manages routing based on user-defined rules.
  • oute traffic to different services based on either the host or the content of the path contained within that URL.
crazylion lee

Shadowsocks - A secure socks5 proxy - 0 views

shadowsocks.org/index.html

python socket proxy

shared by crazylion lee on 24 Jul 16 - No Cached
  • crazylion lee on 24 Jul 16
     
    "A secure socks5 proxy, designed to protect your Internet traffic."
張 旭

Intro to deployment strategies: blue-green, canary, and more - DEV Community - 0 views

dev.to/...blue-green-canary-and-more-3a3

devops deploy system micro service

shared by 張 旭 on 23 Nov 18 - No Cached
  • using a service-oriented architecture and microservices approach, developers can design a code base to be modular.
  • Modern applications are often distributed and cloud-based
  • different release cycles for different components
  • ...20 more annotations...
  • the abstraction of the infrastructure layer, which is now considered code. Deployment of a new application may require the deployment of new infrastructure code as well.
  • "big bang" deployments update whole or large parts of an application in one fell swoop.
  • Big bang deployments required the business to conduct extensive development and testing before release, often associated with the "waterfall model" of large sequential releases.
  • Rollbacks are often costly, time-consuming, or even impossible.
  • In a rolling deployment, an application’s new version gradually replaces the old one.
  • new and old versions will coexist without affecting functionality or user experience.
  • Each container is modified to download the latest image from the app vendor’s site.
  • two identical production environments work in parallel.
  • Once the testing results are successful, application traffic is routed from blue to green.
  • In a blue-green deployment, both systems use the same persistence layer or database back end.
  • You can use the primary database by blue for write operations and use the secondary by green for read operations.
  • Blue-green deployments rely on traffic routing.
  • long TTL values can delay these changes.
  • The main challenge of canary deployment is to devise a way to route some users to the new application.
  • Using an application logic to unlock new features to specific users and groups.
  • With CD, the CI-built code artifact is packaged and always ready to be deployed in one or more environments.
  • Use Build Automation tools to automate environment builds
  • Use configuration management tools
  • Enable automated rollbacks for deployments
  • An application performance monitoring (APM) tool can help your team monitor critical performance metrics including server response times after deployments.
張 旭

Kubernetes - Traefik - 0 views

docs.traefik.io/...kubernetes

kubernetes networking network ingress traefik

shared by 張 旭 on 04 Jul 19 - No Cached
  • allow fine-grained control of Kubernetes resources and API.
  • authorize Traefik to use the Kubernetes API.
  • namespace-specific RoleBindings
  • ...29 more annotations...
  • a single, global ClusterRoleBinding.
  • RoleBindings per namespace enable to restrict granted permissions to the very namespaces only that Traefik is watching over, thereby following the least-privileges principle.
  • The scalability can be much better when using a Deployment
  • you will have a Single-Pod-per-Node model when using a DaemonSet,
  • DaemonSets automatically scale to new nodes, when the nodes join the cluster
  • DaemonSets ensure that only one replica of pods run on any single node.
  • DaemonSets can be run with the NET_BIND_SERVICE capability, which will allow it to bind to port 80/443/etc on each host. This will allow bypassing the kube-proxy, and reduce traffic hops.
  • start with the Daemonset
  • The Deployment has easier up and down scaling possibilities.
  • The DaemonSet automatically scales to all nodes that meets a specific selector and guarantees to fill nodes one at a time.
  • Rolling updates are fully supported from Kubernetes 1.7 for DaemonSets as well.
  • provide the TLS certificate via a Kubernetes secret in the same namespace as the ingress.
  • If there are any errors while loading the TLS section of an ingress, the whole ingress will be skipped.
  • create secret generic
  • Name-based Routing
  • Path-based Routing
  • Traefik will merge multiple Ingress definitions for the same host/path pair into one definition.
  • specify priority for ingress routes
  • traefik.frontend.priority
  • When specifying an ExternalName, Traefik will forward requests to the given host accordingly and use HTTPS when the Service port matches 443.
  • By default Traefik will pass the incoming Host header to the upstream resource.
  • traefik.frontend.passHostHeader: "false"
  • type: ExternalName
  • By default, Traefik processes every Ingress objects it observes.
  • It is also possible to set the ingressClass option in Traefik to a particular value. Traefik will only process matching Ingress objects.
  • It is possible to split Ingress traffic in a fine-grained manner between multiple deployments using service weights.
  • use case is canary releases where a deployment representing a newer release is to receive an initially small but ever-increasing fraction of the requests over time.
  • annotations: traefik.ingress.kubernetes.io/service-weights: | my-app: 99% my-app-canary: 1%
  • Over time, the ratio may slowly shift towards the canary deployment until it is deemed to replace the previous main application, in steps such as 5%/95%, 10%/90%, 50%/50%, and finally 100%/0%.
張 旭

MetalLB, bare metal load-balancer for Kubernetes - 0 views

metallb.universe.tf/concepts

kubernetes network

shared by 張 旭 on 14 Apr 21 - No Cached
  • it allows you to create Kubernetes services of type “LoadBalancer” in clusters that don’t run on a cloud provider
  • In a cloud-enabled Kubernetes cluster, you request a load-balancer, and your cloud platform assigns an IP address to you.
  • MetalLB cannot create IP addresses out of thin air, so you do have to give it pools of IP addresses that it can use.
  • ...6 more annotations...
  • MetalLB lets you define as many address pools as you want, and doesn’t care what “kind” of addresses you give it.
  • Once MetalLB has assigned an external IP address to a service, it needs to make the network beyond the cluster aware that the IP “lives” in the cluster.
  • In layer 2 mode, one machine in the cluster takes ownership of the service, and uses standard address discovery protocols (ARP for IPv4, NDP for IPv6) to make those IPs reachable on the local network
  • From the LAN’s point of view, the announcing machine simply has multiple IP addresses.
  • In BGP mode, all machines in the cluster establish BGP peering sessions with nearby routers that you control, and tell those routers how to forward traffic to the service IPs.
  • Using BGP allows for true load balancing across multiple nodes, and fine-grained traffic control thanks to BGP’s policy mechanisms.
張 旭

Basics - Træfik - 0 views

docs.traefik.io/basics

docker proxy networking

shared by 張 旭 on 28 Aug 18 - No Cached
  • Modifier rules only modify the request. They do not have any impact on routing decisions being made.
  • A frontend consists of a set of rules that determine how incoming requests are forwarded from an entrypoint to a backend.
  • Entrypoints are the network entry points into Træfik
  • ...27 more annotations...
  • Modifiers and matchers
  • Matcher rules determine if a particular request should be forwarded to a backend
  • if any rule matches
  • if all rules match
  • In order to use regular expressions with Host and Path matchers, you must declare an arbitrarily named variable followed by the colon-separated regular expression, all enclosed in curly braces.
  • Use a *Prefix* matcher if your backend listens on a particular base path but also serves requests on sub-paths. For instance, PathPrefix: /products would match /products but also /products/shoes and /products/shirts. Since the path is forwarded as-is, your backend is expected to listen on /products
  • Use Path if your backend listens on the exact path only. For instance, Path: /products would match /products but not /products/shoes.
  • Modifier rules ALWAYS apply after the Matcher rules.
  • A backend is responsible to load-balance the traffic coming from one or more frontends to a set of http servers
  • wrr: Weighted Round Robin
  • drr: Dynamic Round Robin: increases weights on servers that perform better than others.
  • A circuit breaker can also be applied to a backend, preventing high loads on failing servers.
  • To proactively prevent backends from being overwhelmed with high load, a maximum connection limit can also be applied to each backend.
  • Sticky sessions are supported with both load balancers.
  • When sticky sessions are enabled, a cookie is set on the initial request.
  • The check is defined by a path appended to the backend URL and an interval (given in a format understood by time.ParseDuration) specifying how often the health check should be executed (the default being 30 seconds). Each backend must respond to the health check within 5 seconds.
  • The static configuration is the global configuration which is setting up connections to configuration backends and entrypoints.
  • We only need to enable watch option to make Træfik watch configuration backend changes and generate its configuration automatically.
  • Separate the regular expression and the replacement by a space.
  • a comma-separated key/value pair where both key and value must be literals.
  • namespacing of your backends happens on the basis of hosts in addition to paths
  • Modifiers will be applied in a pre-determined order regardless of their order in the rule configuration section.
  • customize priority
  • Custom headers can be configured through the frontends, to add headers to either requests or responses that match the frontend's rules.
  • Security related headers (HSTS headers, SSL redirection, Browser XSS filter, etc) can be added and configured per frontend in a similar manner to the custom headers above.
  • Servers are simply defined using a url. You can also apply a custom weight to each server (this will be used by load-balancing).
  • Maximum connections can be configured by specifying an integer value for maxconn.amount and maxconn.extractorfunc which is a strategy used to determine how to categorize requests in order to evaluate the maximum connections.
張 旭

Networking with overlay networks | Docker Documentation - 0 views

docs.docker.com/...network-tutorial-overlay

docker networking

shared by 張 旭 on 14 Sep 18 - No Cached
  • The manager host will function as both a manager and a worker, which means it can both run service tasks and manage the swarm.
  • connected together using an overlay network called ingress
  • each of them now has an overlay network called ingress and a bridge network called docker_gwbridge
  • ...7 more annotations...
  • The docker_gwbridge connects the ingress network to the Docker host’s network interface so that traffic can flow to and from swarm managers and workers
  • recommended that you use separate overlay networks for each application or group of applications which will work together
  • You don’t need to create the overlay network on the other nodes, beacause it will be automatically created when one of those nodes starts running a service task which requires it.
  • The default publish mode of ingress, which is used when you do not specify a mode for the --publish flag, means that if you browse to port 80 on manager, worker-1, or worker-2, you will be connected to port 80 on one of the 5 service tasks, even if no tasks are currently running on the node you browse to.
  • Even though overlay networks are automatically created on swarm worker nodes as needed, they are not automatically removed.
  • The -dit flags mean to start the container detached (in the background), interactive (with the ability to type into it), and with a TTY (so you can see the input and output).
  • alpine containers running ash, which is Alpine’s default shell rather than bash
張 旭

How To Create a Kubernetes Cluster Using Kubeadm on Ubuntu 18.04 | DigitalOcean - 0 views

www.digitalocean.com/...-using-kubeadm-on-ubuntu-18-04

cluster ubuntu kubernetes system

shared by 張 旭 on 27 Mar 19 - No Cached
  • A pod is an atomic unit that runs one or more containers.
  • Pods are the basic unit of scheduling in Kubernetes: all containers in a pod are guaranteed to run on the same node that the pod is scheduled on.
  • Each pod has its own IP address, and a pod on one node should be able to access a pod on another node using the pod's IP.
  • ...12 more annotations...
  • Communication between pods is more complicated, however, and requires a separate networking component that can transparently route traffic from a pod on one node to a pod on another.
  • pod network plugins. For this cluster, you will use Flannel, a stable and performant option.
  • Passing the argument --pod-network-cidr=10.244.0.0/16 specifies the private subnet that the pod IPs will be assigned from.
  • kubectl apply -f descriptor.[yml|json] is the syntax for telling kubectl to create the objects described in the descriptor.[yml|json] file.
  • deploy Nginx using Deployments and Services
  • A deployment is a type of Kubernetes object that ensures there's always a specified number of pods running based on a defined template, even if the pod crashes during the cluster's lifetime.
  • NodePort, a scheme that will make the pod accessible through an arbitrary port opened on each node of the cluster
  • Services are another type of Kubernetes object that expose cluster internal services to clients, both internal and external.
  • load balancing requests to multiple pods
  • Pods are ubiquitous in Kubernetes, so understanding them will facilitate your work
  • how controllers such as deployments work since they are used frequently in stateless applications for scaling and the automated healing of unhealthy applications.
  • Understanding the types of services and the options they have is essential for running both stateless and stateful applications.
1 - 20 of 32 Next ›
Showing 20▼ items per page