Automotive Services :
Smog check
Tune-up
Brake service
Radiator
Batteries
Transmission flush
Coolant flush
Power steering flush
Differential service
Fuel filter change
Fuel injection service
Diesel air filter (Ford, Chevy & Dodge)
Diesel fuel filter
Bosch wiper blades
14 point services
Check wiper blades
Install new oil filter (canister filter - extra charge)
Lubricate the chassis
Belt inspection
Change oil up to 5 quarts (charge for extra oil over 5 qts)
Check window washer fluid
Check and refill transmission fluid (automatic)
Check and refill power steering fluid
Check air, cabin and AlC filters
Inflate tires to proper pressure
Vacuum interior
Car Wash Included
Trucks, Vans & SUV extra charge
Cannister Filters extra charge
While these fuel barons are diligently researching the methods by which they can continue to fleece us, a "grease-roots" movement has already emerged to free us from the petrochemical dependency the media always reminds us we have.
Cylinder head bolts are mainly used in the diesel engine industry to fasten the cylinder head to the cylinder block frame or cylinder block and are generally fixedly installed on the top surface of the cylinder block.
To prevent loosening and better withstand alternating loads of shock and vibration, the upper-end thread is often made of fine teeth, and the lower end and the cylinder block are also fastened to certain self-locking measures, such as interference fit. Process the thrust flange near the lower thread of the shank, etc.
All items are produced in strict accordance with industry standards or client-specific requirements.
Connecting rod bolts are mainly used in the diesel engine industry. It is an important bolt that connects the big end bearing seat of the connecting rod and the bearing cap to make it integrated.
The head of the connecting rod bolt is usually processed with a positioning plane or a protrusion so that it can be fitted with the bearing support surface during installation. The diameter of the bolt shank located at each subdivision plane of the bearing is larger so that it can be positioned with the bolt hole during assembly. The diameter of the shank portion of the remaining bolts is smaller than the diameter of the bolt hole, and the length is longer to reduce the load on the threaded portion when subjected to bending and impact loads. The threaded part adopts the high-precision fine thread.
All items are produced in strict accordance with industry standards or client-specific requirements.
Coupling bolts are mainly used in the diesel engine industry.
All items are produced in strict accordance with industry standards or client-specific requirements.