Group items tagged

Ten Tips to Help You with Your Kaizen Continuous Improvement Strategy The Kaizen methodology encourages ongoing efforts to ensure continuous improvement throughout a facility. This improvement can come in many forms including waste elimination, improved efficiency, safer work environments and much more. To simply say that a facility is employing Kaizen strategies, is essentially meaningless if you don't have any concrete action items you are following. Whether you're just getting started or you are looking for ways to reinvigorate a Kaizen strategy that is not effective, the following ten tips will be very helpful. Each one can give you ideas on what you can do encourage improvement and allow that improvement to grow and expand long into the future. Tip #1 - Harness the PDCA Strategy One of the key concepts used in Kaizen is the "Plan-Do-Check-Act" strategy. This is a quality model that can be used when implementing any type of improvement in the facility. As you might expect, the PDCA strategy is a cycle of ongoing improvement that should never end. The steps are as follows: Plan - This step is where you identify an area where improvement is possible and make an initial strategy on what chance should be made to realize the desired improvements. Do - Implement the change, but only on a small scale. This may mean having one department make the change in some situations or for larger corporations, having one facility make the update. During this step it is also very important to be gathering as much data regarding the change so it can be properly evaluated. Check - Review the results of the change including the data that was collected. Looking to see if they had the desired impact or not is critical to know whether you should move forward with rolling the change out to other areas. Act - IF the data in the check step points to a success, it is time to push the change out on a wider scale. Once the change has been successfully implemented you wi

The Adventure of Reducing Risks and Hazards in the Workplace Whenever starting a new job, it can be difficult to figure out exactly what you should be doing, and how it needs to be done. When I started working at a new facility as a safety manager, I began my first day with a meeting with the facility manager. The meeting was set up so he could tell me what was expected of me in my new role, and provide other details of the job. I was quite surprised when the meeting took less than two minutes, and the only objective I was given was to 'reduce risks and hazards in the workplace.' I asked for some clarification or guidance in what exactly he was looking for, but he simply said that I was hired to improve safety, and he was leaving the task of finding out how to do it in my hands. He gave me a sheet of paper with some information about what resources I had available, including my annual safety budget and told me to get to work right away. I should point out there that I had several years experience as a safety manager at a large company, which is why I was brought in to this new facility. The facility had recently been cited by OSHA for a variety of safety hazards, and there were even some fairly severe injuries that occurred in the previous months. The facility owners made it clear that safety was a priority for them, and they were willing to do whatever it took to pass inspections, and keep the employees safe. Planning My Safety Program While that initial meeting was unique, to say the least, I was also quite excited about the opportunity. It is quite rare that a safety manager is given such flexibility, and I wanted to make sure the manager wouldn't regret that decision. I got to work right away planning my safety improvement program. OSHA Safety Sign Guide I wanted to make some quick changes to help improve safety in the short term, and then also plan out ways to create a culture change within the facility so everyone would be more safety focused. I kne

A pitfall in the path to innovation and disruption is the lop sided focus on "creation" and not enough focus on "consumption". Creation is the process of creating platforms, products, and solutions where as consumption focusses on ensuring that the created artifacts deliver the intended value. Too often enterprises get caught up in "creation" or enabling "creation" and lose sight of the fact that without consumption, anything they create is bound to be a failure. Creation & Consumption can not be Sequenced A misconception that often exists is that "if we build it, they will come" i.e creating the product and solution is enough and its existence will automatically lead to consumption and value generation for the customer. However, creation and consumption cannot be sequenced i.e. made a focus sequentially. Creation and consumption only succeed when they go hand in hand where tight, iterative loops ensure that the creation is informed by consumption trends and feedback and that consumption is also leveraging the latest creations. What Does A Lop-Sided Focus Look Like The top 3 signs of this lop-sided focus are as follows Focus on Building Platforms When the focus of the enterprise is building platforms and when customer value is only created when a developer leverages the platform to build a customer facing application, it often means that the effort invested in the platform has no ROI. When the focus is on platforms, application investment suffers and the platform builders get sidetracked with platform KPIs as opposed to business value KPIs. The platform builders might only focus on "Developer" satisfaction when ultimately, customer satisfaction matters for the business. Focus on Tools, Not on Solutions Another sign of lop-sided investment is a focus on tooling at the expense of solutions. Enterprise teams can often go overboard with building large libraries of tools and using the adoption of the tool as a metric of success. However, simil

One of the most common misconceptions out there is the belief that technology equates innovation. Innovation is the creation of new value through a better solution for a problem that either does a better job in solving the problem or does so in a manner that the solution is accessible in a larger set of circumstances by a larger number of people. On the other hand, technology is simply the tooling that holds the promise of new solutions but by itself, is meaningless. Enterprises can become enamored by the promise and hype about technology and go down long, complex journeys, invest millions in upgrading technology and still come out empty on the other side because they built technology for technology's sake. Even in well intention boards and C-suite, industry peer pressure and hype around technologies can force action that ultimately leads to massive investments in people, software, technology, and vendors but does not yield the ROI promised by the technology. Leadership The problem can be accentuated when not enough due diligence is done on the applicability of the technology to the enterprise given the current state i.e. the point in time when the technology is being introduced, the customer's propensity to accept the technology-driven solution i.e. are the users ready to embrace, adopt, learn and utilize new solutions and burning problems that necessitate the adoption of new technology to better solve the problem. When the timing of new technology introduction is gotten wrong, it almost always fails to deliver on its promised ROI. Leaders need to rise above the hype and peer pressure and ensure that they understand, first and foremost, the burning problems that plague their customers or make the bedrock of their future strategy. Next, leaders need to ensure and validate that the technology in mind can actually be used to solve the problem through rapid prototyping and minimal investment. Once customer feedback on the prototype has been validated, then only

Technology Congestion is a not a recent phenomenon but the urgency around Digital Innovation and Digital Transformation has brought it front and center. Technology Congestion is a point in the Digital Journey where multiple technology initiatives, executed in parallel become entangled with each in a state where none of the initiatives, hampered by inter dependencies, prioritization, and cost, is able to complete, make progress and deliver business value. Modern Experiences Require Multiple Technologies Building a consumer driven, customer centric experience that truly delights and moves business KPIs requires several technologies to come together in almost a magical experience. This means that not on boarding and deploying multiple technologies is not an option or possibility. Enterprises have to build competencies in multiple technologies (and they have multiple strategic options to do so) and this can be a daunting task. Managing Technology Dependencies Often, an app-centric methodology requires a complete focus on the user and customer's experience. Delivering that experience can requires technologies that leverage each other or are inter-dependent on each other. Inter-dependencies can be sequential i.e. Technology A is required to be installed and operational before Technology B can be initialized. Inter-dependencies can also be matrixed i.e. a service X might require service Y to be complete and Service Y requires Technology B. Inter-dependencies can also be circular where System M feeds information into System N and System N, in turn, provides feedback to enable System M to iterate and improve. Innovation To A Screeching Halt Technology congestion can stall innovation. Sorting out dependencies can delay innovation and new product development and cause the enterprise to become anti-app-centric. The net impact is lost time and energy in technology installation and deployment with less than ideal focus and attention on customer value and user experience.

Blockchain are certain to disrupt almost all industries fundamentally. Though there are technical issues, the idea of utilizing a blockchain to prove ownership, to prevent double spending and to establish trust and transactions in an otherwise trust-deficient world, is gaining excitement and acceptance. More and more enterprises are getting curious about the blockchain and are willing to start investing in learning, prototyping, and building on top of the blockchain technology. Starting out with the blockchain requires investment in a building the domain expertise, establishing the identity, establishing the infrastructure and deciding the blockchain that the enterprise wants to work with. Among these decisions is the question: Should the enterprise choose a public blockchain or a private blockchain. Both have advantages and disadvantages and the question can often come down to what are the short term goals and potential applications that the enterprise wants to build on the blockchain. Public BlockChains The default option when considering blockchains is the public blockchain. This is the blockchain that is truly decentralized, leverageable for any type of transaction and in the case of the Ethereum blockchain, offers SmartContract authoring capability that makes the blockchain very attractive for building contracts that reflect the needs of the real world. However, for an enterprise deciding between public or private contracts, there are some considerations that require attention. Speed and Scalability Public blockchains tend to be slower as they are limited by the number of transactions that can be verified every second and confirmed every 10 minutes. There are several efforts underway to make blockchains faster and more scalable however those will take time to get implemented. Speed and scalability will continue to be an issue and contracts and applications that require instant or near real time execution will suffer from this lack of speed and scale. Se

Workplaces today are extremely safe compared to what people had to endure generations ago. This is in large part because of the increased focus employers have put on workplace safety. Employers made this effort for a variety of reasons including regulatory pressure, the best interests of their employees, and of course, the fact that a safe workplace is a more profitable workplace. Despite all the great strides that have been made, many workplaces are still quite hazardous. The following 10 workplace safety mistakes illustrate just how far many industries still have to go. They can also help spur ideas for where improvements can be made in your facility. 1. Using Ladders Improperly One of the most common and most dangerous workplace safety mistakes is failing to use a ladder properly. People make many ladder-related mistakes in the workplace, all of which can be devastating. The following are just a few of the more common examples: Unsteady Ladders - If you don't take the time to properly steady the ladder when setting it up, it could easily slide out while you're on it, causing serious injuries. Leaning from Ladders - When working on a ladder, you should never reach off to the left or right as that can throw the center of balance off, which could cause the ladder to fall. Using Objects as a Ladder - Using scaffolding, chairs, stools, or other objects to reach high areas can be dangerous. These things aren't meant for climbing the same way a ladder is. Climbing too High on Ladders - One should never step onto the upper rungs of a ladder. Depending on how the ladder is placed, even several rungs down can be unstable. 2. Lack of Visual Communication The noise in many workplaces can be quite deafening at times, which can make it difficult to communicate. When it comes to safety, communication is essential. This is why it is so important to have visual communication options in any loud workplace. Visual communication can come in many forms including

Tips & Tricks for Efficiently Tracking Lean Projects Recently, we wrote about a couple of problems facing many Lean practitioners. These were problems that hindered their learning process and often caused overconfidence. Amongst the advice to help combat these problems arose the need for detailed tracking and note taking with regards to practice and progress. Being able to accurately track not only the effects but also the process of a Lean project is critical to ongoing success, and is a key to stimulating growth amongst not only the receiving end of your project objectives, but also amongst the employees and Lean practitioners themselves. To start off, let's take a look at the current state of Lean project tracking for many Lean practitioners. A recent LinkedIn discussion posed the very question of project tracking, and sought to understand a few different distinct metrics. In addition to measuring the effectiveness of any program when it comes to completion, tracking can also be about measuring the scope of your projects, so that you can accurately project what the effects will be before you actually reach the stage at which you expect them. Part of this "scope" involves tracking exactly who is involved with your project, who is affected, and how they are progressing in their respective tasks. Where we are now First of all, it's important to evaluate the current methods that are prevalent in Lean record keeping. The LinkedIn discussion starter, self-identified as Ian R., mentions in his opening post that, when he last posed the question about a year ago, the consensus was that most practitioners were simply using excel spreadsheets for their tracking needs. While there's nothing wrong with relying on Excel for the basics, other users were quick to offer up some slicker alternatives, signaling a sharp (and welcomed, in our book) departure from some of the more basic methods. Unsurprisingly, there exist several specialist software applications whose n

Much has and needs to be said about an enterprise's AI strategy. Artificial Intelligence or AI is considered a fundamentally disruptive technology similar to the steam engine, electricity etc, a technology that will be pervasive and absolute in its impact on the world and its inhabitants. The ability to find hidden patterns to predict the future or detect a behavior has massive implications across the world, in every industry, sector, and domain. When faced with this realization, enterprise's can find themselves stuck, paralyzed and unsure about how to proceed. The field of AI is decades old already and the early success stories have been practicing AI for multiple years already with the tech industry leading the way. How can an enterprise that has no experience and competency in this area let alone lead the technology or even leverage it appropriately to drive business value? When developing the AI strategy, two ideas are paramount. First, this a fundamentally disruptive technology and the enterprise will need to establish it as a core competency for the foreseeable future. Not doing so will not be an option. Second, a long-term plan to success is superseded by the need to drive quick wins and small successes not only to build confidence but use real-world experience to develop and hone that skill. The Short-Term AI Strategy The short-term AI strategy should focus on driving immediate business value through enhanced customer experiences that leverage any field of AI be it machine learning, deep learning, natural language processing etc. Driving the usage and deployment of AI in front of an end user making them smarter, productive and better informed can pay rich dividends by not only helping the enterprise can real-world experience, but it can also give a perception boost to the company as being innovative and cutting edge. However, most importantly, this can highlight and promote the success and potential of AI in the enterprise and encourage a snowball eff

The cutting edge platforms for today will be the commoditized platforms of tomorrow. As the technology matures and evolves, the previous generation of technology becomes easier to build and deploy enabling a rush of vendors to capitalize on it by making it accessible to the largest possible customer base. This puts enterprises in the nontechnology sectors in an awkward position. Often not ready to consume the latest and greatest technology due to parts of their stack unable to leverage new technology and requiring upgrade to and deployment of the stepping stone technology, these enterprises have to choose between vendor lock-in in a multi-year software and service contract or risk building and implementing a version of the older technology in-house. Business Drivers of Infrastructure-as-a-Service The biggest risk in building technology platforms in-house is the risk of commoditization. The argument played out with the debate over internal vs. public clouds. Initially, enterprises were hesitant to leverage public clouds with several of them opting to build internal, private clouds. Building a cloud is hard. Operating and maintaining a cloud is even harder. Ensuring that the cloud is running on and leveraging the best in class technology requires dedication to the cause. This is often missing in non-technology enterprises by design given they are driven by different and separate business drivers and considerations. A cloud service provider is motivated to ensure the best in class service and technology because that drives revenue for them. An enterprise whose main business is not offering cloud or software services will not be motivated by the same drivers and thus there will be an inherent difference in their approach and success with building and delivering an internal cloud. Business Drivers for Platform-as-a-Service The same argument (public vs private clouds) applies to platforms. Building the best in class platforms that offer the ability to develop cuttin

Introduction It's the end of the day. You get home from work, sit down on your couch, and begin to relax. In this process, you may turn to music as a way to help you relax and forget the stresses of daily life. The best kind of music for this? Classical instrumental music, of course! But there's one small problem: how do you find classical music? After all, classical music isn't as popular as pop, hip hop, and rock, making it semi-difficult to find classical music, especially if your taste involves more obscure pieces. The journey to find such pieces can be difficult, which is why I want to help you by telling you the best sites and streaming services to find-and listen to-classical music. So, without further ado, let's jump right into it! The 5 Best Sites for Classical Music YouTube What kind of list would this be if I neglected to mention one of, if not the most popular website in the world, YouTube. Ever since it's inception in 2005, the site's displayed steady growth, allowing billions of people to find enjoyment and joy on the Internet. And with YouTube being one of the biggest sites in the world, it only makes sense to have a section of the website dedicated to music. This section, aptly named YouTube Music, contains any kind of music for any kind of listener. This includes classic instrumental music. Trust me when I say, there is plenty of classical music for you to listen to, from the most popular composers to the more obscure composers. Spotify Next up, we have Spotify, a titan of the streaming industry. While Spotify doesn't allow the streaming of videos, no service besides Apple Music can compete with its catalog of music, including classical instrumental music. Spotify is especially great for people who like all kinds of genres, and its cheap subscription price gives little reason to not at least consider using the service. As a matter of fact, I think there's a free monthly trial. Wouldn't hurt to give it a spin! Only thing that may give you trou

We hear this comment occasionally from customers, but the important thing to consider is what are they comparing our products with to make this comparison? Let's have a look…. What are you actually getting when you purchase Youngevity's core 90 for Life Healthy Start pack?90 for Life pack Vitamins that are "grown" from certified organic fruits and vegetables, rather than vitamins produced synthetically in a laboratory. Youngevity grows specific crops in mineralized soils to reap the particular vitamins they include in the Tangy Tangerine and OsteoFX products. Unlike synthetic vitamins, the body rapidly absorbs and uptakes these plant-derived and natural vitamins. They come as nature intended us to have them, complete with enzymes, natural fiber (prebiotics), and probiotics. As such the body can easily utilize them. Plant Derived Minerals, rather than rock-based minerals. Humans were not intended to eat rocks whether crushed or whole! The only way we can readily absorb minerals is after plants have uptaken the rock minerals from the soil and through photosynthesis converted those minerals into many times smaller particles that easily pass through the human cellular structure. These Plant Derived Minerals used in Tangy Tangerine and OsteoFX are typically around 98% absorbable whereas rock-based minerals are at best about 8% absorbable. If you're considering product cost you would have to factor in the cost of 92 cents of every dollar you spend on supplements with rock-based minerals are being flushed down your toilet bowl. Careful production methods are used to ensure maximum nutrient value is retained, and preservatives are not required. Youngevity uses a slow spinning, low heat process to convert the fresh fruit and vegetables in the Tangy Tangerine 2.0 powder and OsteoFX powder formulations which, over many hours, produces the microcrystalline powders in these 2 products. The low heat means vital plant elements such as prebiotics and probiotics are

Some internet marketing experts stated that you can't really tell if a certain Ecommerce Web Designer administer a design that is favorable only for white hat practices unless you checked the coding. Again, is there a full proof of white hat only?

Enterprises have to constantly decide, at every step in their digital journey, should they build or buy. This question often is posed as a critical, do or die decision and the answer varies on a case by case basis. Building can be expensive, take longer but offers future proofing and more dependability whereas buying offers a faster time to market, less risk and accountability forced through contractual terms. However, a key point often overlooked is the cost of integration. Integration can be required at multiple levels. Vendor Applications Vendor applications typically require a two-way connection between the enterprise systems and the vendor application. The application requires incoming data and information from somewhere in the enterprise technology stack and an output stream of information back into the enterprise at one or more points in the stack or workflow. Vendor Platforms Vendor provided platforms typically have similar integration requirements as Vendor applications requiring an incoming data & information connection and an outgoing information connection into the enterprise process, workflow, platform or product. Application-To-Application Application to Application integrations where an application needs to be connected to another application to either provide data or signals to enable the downstream application to create value can be seemingly deceptive. Application-To-Application integration costs can grow at O(n^2) as potentially, worst case, each application could be connected with every other application. Enterprise Stack Fragmentation The problem of integration is exacerbated by the fragmentation of the enterprise at the organization level. This problem is also known as "Shadow IT" is driven by superficially differing needs of multiple lines of businesses in an enterprise. Shadow IT typically leads to multiple instances of similar technology stacks that cause data, compute and information to be silo'd. Stack fragmentation and its

Improving Indoor Air Quality Indoor Air QualityWhen trying to make improvements to the workplace, many companies don't even consider the actual air that is breathed in by everyone all day. Indoor air quality can be a significant problem that can have a wide range of different effects on employees throughout the facility. Some of these issues can be immediately seen, such as with allergies. Others may take longer to develop, but can be very serious. If you are not taking air quality seriously in your facility, you are not only doing everyone a disservice, but you could be exposing the company to the risk of potential lawsuits years down the road. With this in mind, take some time to look at five of the most important things that you should know about indoor air quality, and how you can make simple changes to improve it. According to OSHA's Safety and Health Topics: Poor indoor air quality (IAQ) has been tied to symptoms like headaches, fatigue, trouble concentrating, and irritation of the eyes, nose, throat and lungs. Also, some specific diseases have been linked to specific air contaminants or indoor environments, like asthma with damp indoor environments. In addition, some exposures, such as asbestos and radon, do not cause immediate symptoms but can lead to cancer after many years. 5 Things to Know about Indoor Air Quality 1. Proper Ventilation and Filtering One of the biggest problems in most workplaces is that the air in the facility doesn't get properly circulated. As the air is breathed, moved around machinery and exposed to cleaning chemicals, it keeps picking up more and more contaminants along the way. Over time, this air can become hazardous to your health and lead to things like headaches, allergies and many other issues. This is why OSHA and many other regulatory organizations recommend reviewing your facilities air ventilation system and filtering. By taking the air from within the facility and venting it outside, all of these common contam

People today work 40+ hours per week, meaning they are spending about half of their waking hours at work. Given the total number of hours employees are spending at work, it is inevitable that some of them will experience serious medical problems while at the facility. When this happens, employers have a responsibility to be able to contact the paramedics right away, and to provide the initial care until professionals can arrive. In the event of respiratory or cardiac arrest, it may be necessary to perform CPR or even use an AED. Providing instruction to employees on how to use an AED, and how to properly perform CPR is essential. Some companies will offer the training to everyone in the facility, and others will only train a select few. The important thing is that there is someone who can respond to emergencies, and help keep the person alive until the paramedics can arrive. What is CPR? CPR, or Cardiopulmonary resuscitation, is one of the most commonly seen emergency procedures. It is performed on television all the time, and even in real life it is far more common than most people might think. While it might look easy to perform on TV, the fact is, it needs to be done with proper technique or it can cause a lot of damage. Fortunately, training people to properly perform CPR is fairly simple, and doesn't take very long. In many cases a full CPR class can be given in a half of a day, and the employees in the class can become certified to perform this life saving procedure. During the training classes, employees will learn when they should attempt CPR, and how it should be performed. Some interesting things that employees will learn include: CPR is done to help push the blood through the body when the heart is not beating. Keeping the blood circulating will prevent damage to the heart, brain and other vital organs. Rescue breathes are actually optional. While most people surveyed believe that breathing into the mouth of the victim is the most important part of

Confined Space Entry Permits - Safety Guidelines Hidden In The Cracks Dangerous, confined spaces are the stuff of horror films and cringe-worthy moments on screen, and there's a reason. Depictions of people trapped in a confined space not only play on a natural human tendency toward claustrophobia, but they also reflect a very real danger in the workplace. As such, OSHA has implemented a system of "confined space entry permits," hoping to help increase worker awareness and avoid common types of injury and death associated with working in a confined space. In this blog post, we'll cover everything from the definition of a confined space, to the details of a fully developed entry permit system. What Is A Confined Space? While the question may seem elementary, OSHA does adhere to strict definitions for confined spaces; this is important to know as a safety professional, as you'll need to be aware of which spaces require you to adhere to OSHA protocol and which don't. Basically, a confined space has to be a place that's large enough for a person to work and perform their job within, but is not intended for long term occupancy by workers. The third and final criteria is that the space has limited means of entry and exit. In short, the space is a place that someone can fit and work in for a limited time, but which impairs mobility and might be difficult to enter and, more importantly, exit quickly. What Is A Confined Space Entry Permit? Sometimes, confined spaces have additional potential risks and hazards that go above and beyond just their shape and size. In these cases, OSHA requires that permits are filed before a worker enters the space. Here are OSHA's additional criteria that indicate the necessity of a permit: The space contains or could contain a hazardous atmosphere The space is comprised of or contains a material that could engulf a worker who enters. The space has any kind of "internal configuration" that might present an additiona

It happens to all of us in every day life, from time to time uneven ground, slippery surfaces, or a momentary distraction can send us tumbling. In most cases, we're lucky to walk away relatively unscathed, but slips, trips, and falls can also cause major injuries and complications. This is especially true in the workplace, where heavy equipment, moving vehicles, and other factors can be involved. Let's take a look at some effective methods you can improve your efforts to prevent these common injuries. Why You Should Care While slips and falls can be serious, we witness minor tumbles more often, desensitizing us to the potential for injury, death, and work loss days as a result. To counter this perception, however, the U.S. Department of Labor put out some startling statistics: According to reports filed, slips, trips, and falls are second only to motor vehicle incidents in accidental deaths every single year. Furthermore, one quarter of all injury claims filed in a year will come from slips and falls, and the estimated work days lost per year to related injuries number nearly 100 million in the U.S. alone - accounting for over 60% of all work days lost. Clearly, there are improvements to be made, and a large cumulative consequence when they are not. Decreasing Trip, Slip, and Fall Frequency caution-wet-floor-signMinimize slippery areas: Depending on the type of business you're in, the areas that become greasy or slippery in your workplace, and the root causes behind them, are going to be different. In a restaurant kitchen or food-related establishment, kitchen floors may become slippery with water or greasy from food scraps. In a production facility, a material spill might leave a floor dangerously slick. In a supply yard, sawdust, dust, or machine grease and grime might account for your most dangerous slipping hazards. While slippery areas are sometimes unavoidable, the length of time areas are slippery can be controlled and minimized. Make it employee pr

Eliminating Awkward Postures For most companies, the work that employees perform on a daily basis can be quite physical. This type of physical labor can lead to a wide range of injuries. Of course, to improve on workplace safety it is important to do all you can to help reduce the amount and severity of these types of injuries. One easy place where you can start is with the different postures that employees take while performing their day to day activities. In many cases, they put themselves in awkward postures, which increase the risk of injuries to the back, neck and other parts of the body. Fortunately, there are typically alternative ways to do things or even tools that can do those tasks for them so they can avoid injury. According to OSHA: Working in awkward postures increases the exertion and muscle force an employee must apply to complete a task and compresses tendons, nerves and blood vessels. In general, the more extreme the postures the more force is needed to complete the task. Examples of awkward postures include performing overhead work, bending or twisting to lift an object, typing with bent wrists, and squatting. The important thing is helping to identify the awkward postures, and help find alternatives for the employees. The following five positions should be removed from the workplace as much as possible so that employees can complete their work with as little risk for injury as possible. 5 Awkward Postures that Should be Avoided 1. Working with Arms above the Head The first awkward posture that is commonly seen in workplaces is trying to complete tasks with your arms above the head. There are many examples of this, some of which could include holding up a board while it is secured in place, or even painting a ceiling. Any time you are working with your arms over your head, you are putting added strain on your back. In addition, your arms are going to fatigue much more quickly than they would in a more natural position. This can put you at r

Make Construction Safety a Priority Everyone knows that construction sites can be very dangerous. The more you know about the types of danger you will face, however, will help you to take steps toward keeping everyone safe. Look over the following 10 safety facts and see what you can learn about how to improve the overall safety of your facility. In addition to using this information to help you to make safety improvements, you can also show these items to the workers at any site so they can be more aware. Some of these facts may surprise people, and cause them to be more aware of their surroundings. According to OSHA, "Nearly 6.5 million people work at approximately 252,000 construction sites across the nation on any given day. The fatal injury rate for the construction industry is higher than the national average in this category for all industries." 10 Tips to Improve Construction Safety Fact #1 - Losing your Load On construction sites people use machines to lift and move all sorts of things on a regular basis. Whether it is lifting wood or metal beams, or you are digging out dirt to prepare to lay a foundation, this is an essential part of most jobs. The vast majority of times this type of activity goes very smoothly and the jobs are completed without incident. The fact is, however, that having loads come loose while in transit is actually a leading cause of injury on construction sites. You need to keep in mind that even if you don't lose the entire load, people can be severely injured from even one thing falling out of a crane or back hoe. With this in mind, people working on site need to know to stay well away from this machinery, and the machine operators need to know to avoid moving items when people are nearby. Fact #2 - Entering and Leaving Heavy Machinery Another safety issue related to working with heavy machinery is related to operators getting on and off of the rigs that they will be working on. While this is something that they of