Group items tagged

Best 24 Hours Ambulance Services in LDA Colony, Lucknow with MedCab MedCab provides the best and top 24 hours ambulance services and medical help in LDA Colony, Lucknow. MedCab can be reached readily for quick assistance on our emergency ambulance number for Lucknow at 18008-908-208. MedCab ambulance will provide emergency medical services right away upon being booked over call. This is why MedCab is the top ambulance service choice in LDA Colony, Lucknow. LDA Colony is a posh locality in Lucknow. It is a good residential area due to the easy availability of lot of amenities. The distance of LDA Colony from important locations in Lucknow, such as Chaudhary Charan Singh International Airport, is also minimal. The Transport Nagar Metro Station is also located in close proximity to LDA Colony and is only a 7-minute drive. Some of the good educational institutes are the Lucknow Public School and Little Flower School. One of the top law schools of Lucknow is also in LDA Colony, namely the Dr. Ram Manohar Lohiya National Law University. Besides good educational facilities, LDA Colony also has good shopping centres and places for entertainment. For shopping, examples include LDA Market, Gol Market, and Mangal Market. For entertainment, one of Lucknow's best amusement parks is located in LDA Colony, the Dream World Amusement Park. LDA Colony is located at a short distance from a lot of prime locations in Lucknow. Some of these localities are in close proximity to LDA Colony, such as Hind Nagar and Alambagh. MedCab ambulances offer fast transport to all of these locations. MedCab provides the top ambulance service and transport to all the hospitals in LDA Colony as well as nearby localities.

Summit Management Limited ("Summit") was established in 2009, is licensed by the Cayman Islands Monetary Authority ("CIMA") and is focused on the provision of independent directorship and support services to the alternative funds industry. Summit is led by a management team with considerable experience and expertise and are highly respected for delivering an efficient level of service. Our global client base is equally well respected and range from some of the largest financial institutions in the world to specialist boutique providers, a number of whom the management team have maintained relationships with for over two decades. We are relationship focused, working in a collaborate manner to provide an exceptional level of service. The management team has on average over 20 years' relevant experience and each team member is a registered director with the Cayman Islands Monetary Authority

Digital Transformation is tough, even for seasoned technologists. This is because it is a transformation of an organization at its core. Everything from culture, technology, ideation, development, integration, delivery, and support needs to fundamentally shift to be more customer-centric, service driven, automation first and experimental in nature. No wonder that a lot of organizations take a long time and a lot of investment to see ROI from their digital transformations. Here are 5 signs that your digital transformation might be in trouble. Culture mistrusts the core digital transformation team You are spawning new initiatives before completing previous ones Decisions are top down with low accountability at the leaf nodes You tend to focus on technology stacks with little focus on customer value Inter-organization politics stifles cross-organization scenarios Culture mistrusts the core digital transformation team It is almost impossible to make an entire organization aware and participate in digital transformation at the same time. There are exceptions but in our experience, starting out with a core digital transformation team is a much better strategy than otherwise. This team should be enabled to attack a limited set of important and business relevant problems, build cutting-edge solutions and use them as examples to train and evangelize digital transformation strategies to the rest of the organization. However, the more entrenched an organization in the old way of doing things, the harder they might this central team. Resistance can be active and passive such as refusal to share data or provide the relevant context of the problem. An organization that does not set up the early crusaders for success almost always has a much harder time showing value from their digital transformation activities. You are spawning new initiatives before completing previous ones Executing on a digital transformation strategy is much harder than defining the strategy especially fo

Independent Fire Services Ltd was founded in 2002 by Dominic Cook. Dominic worked as a fire officer in the fire brigade. He worked for many years with Chubb in a variety of senior management roles before looking after Kidde's South East operation. Independent Fire Services is staffed by ex Fire Brigade personnel who provide a range of fire training and services to SME's and Blue Chip companies through-out Scotland and the UK. In March 2007 we achieved ISO 9001:2000, and in January 2009 we gained the new current standard ISO 9001:2015 the scope being: The supply and delivery of fire training. The supply, installation and maintenance of fire protection equipment. To conduct and report upon findings of business fire risk assessment. In choosing a BAFE registered company for your fire equipment and services you are investing in quality protection that provides nationally recognised Third Party Approvals. BAFE registered companies acknowledged in new Government legislation as the sure way of demonstrating competence. BAFE is recognised and endorsed by: Association of British Insurers Chief Fire Officers Association Health and Safety Executive Trading Standards British Standards Institution Government

Technology Congestion is a not a recent phenomenon but the urgency around Digital Innovation and Digital Transformation has brought it front and center. Technology Congestion is a point in the Digital Journey where multiple technology initiatives, executed in parallel become entangled with each in a state where none of the initiatives, hampered by inter dependencies, prioritization, and cost, is able to complete, make progress and deliver business value. Modern Experiences Require Multiple Technologies Building a consumer driven, customer centric experience that truly delights and moves business KPIs requires several technologies to come together in almost a magical experience. This means that not on boarding and deploying multiple technologies is not an option or possibility. Enterprises have to build competencies in multiple technologies (and they have multiple strategic options to do so) and this can be a daunting task. Managing Technology Dependencies Often, an app-centric methodology requires a complete focus on the user and customer's experience. Delivering that experience can requires technologies that leverage each other or are inter-dependent on each other. Inter-dependencies can be sequential i.e. Technology A is required to be installed and operational before Technology B can be initialized. Inter-dependencies can also be matrixed i.e. a service X might require service Y to be complete and Service Y requires Technology B. Inter-dependencies can also be circular where System M feeds information into System N and System N, in turn, provides feedback to enable System M to iterate and improve. Innovation To A Screeching Halt Technology congestion can stall innovation. Sorting out dependencies can delay innovation and new product development and cause the enterprise to become anti-app-centric. The net impact is lost time and energy in technology installation and deployment with less than ideal focus and attention on customer value and user experience.

Enterprises have to constantly decide, at every step in their digital journey, should they build or buy. This question often is posed as a critical, do or die decision and the answer varies on a case by case basis. Building can be expensive, take longer but offers future proofing and more dependability whereas buying offers a faster time to market, less risk and accountability forced through contractual terms. However, a key point often overlooked is the cost of integration. Integration can be required at multiple levels. Vendor Applications Vendor applications typically require a two-way connection between the enterprise systems and the vendor application. The application requires incoming data and information from somewhere in the enterprise technology stack and an output stream of information back into the enterprise at one or more points in the stack or workflow. Vendor Platforms Vendor provided platforms typically have similar integration requirements as Vendor applications requiring an incoming data & information connection and an outgoing information connection into the enterprise process, workflow, platform or product. Application-To-Application Application to Application integrations where an application needs to be connected to another application to either provide data or signals to enable the downstream application to create value can be seemingly deceptive. Application-To-Application integration costs can grow at O(n^2) as potentially, worst case, each application could be connected with every other application. Enterprise Stack Fragmentation The problem of integration is exacerbated by the fragmentation of the enterprise at the organization level. This problem is also known as "Shadow IT" is driven by superficially differing needs of multiple lines of businesses in an enterprise. Shadow IT typically leads to multiple instances of similar technology stacks that cause data, compute and information to be silo'd. Stack fragmentation and its

It's not too late to jump on to the Blockchains trend. We often hear from customers whether it is too late to get behind blockchain. The number of startups in this space is growing rapidly and the number of large ISVs and SIs providing blockchain capability and expertise is also increasing. However, the market and the technology space for blockchains is far from saturated, settled or stable. Here are three reasons why now is a good time to get into blockchains Early Mover Advantage Blockchains are bound to disrupt fundamentally how business is done. By enabling trust in an otherwise trust-deficient environment, blockchains enable transactions between two or more enterprises who otherwise might not know about each other. Blockchains offer solutions to several common problems faced by the enterprise such as Digital Identity, Secure Data Storage, Secure Data Sharing, Distributed Ledger, Distributed Databases etc. Blockchains are based on strong cryptographic standards based in mathematics, cryptography, and encryption. Building blockchains as a core competency requires a deep understanding of the mathematics behind it and an internal process for deploying, managing and developing on top of the blockchain. Early mover advantage can be generated by taking small steps in this area and targeting simpler scenarios initially. Nascent Technology It is going to take another few iterations of the blockchain technology before it can truly be enterprise-ready. There is a lot of ongoing work to make blockchains more secure, scalable and performant. Innovations are constantly being made and added to the core blockchain technology that is constantly increasing the type and complexity of applications that it can support. As the technology matures, enterprises can be well suited and ready to leverage the advancements by building a core competency in not only the blockchain technology but by becoming a member of the blockchain community, standards and keeping up to date with th

Workplaces today are extremely safe compared to what people had to endure generations ago. This is in large part because of the increased focus employers have put on workplace safety. Employers made this effort for a variety of reasons including regulatory pressure, the best interests of their employees, and of course, the fact that a safe workplace is a more profitable workplace. Despite all the great strides that have been made, many workplaces are still quite hazardous. The following 10 workplace safety mistakes illustrate just how far many industries still have to go. They can also help spur ideas for where improvements can be made in your facility. 1. Using Ladders Improperly One of the most common and most dangerous workplace safety mistakes is failing to use a ladder properly. People make many ladder-related mistakes in the workplace, all of which can be devastating. The following are just a few of the more common examples: Unsteady Ladders - If you don't take the time to properly steady the ladder when setting it up, it could easily slide out while you're on it, causing serious injuries. Leaning from Ladders - When working on a ladder, you should never reach off to the left or right as that can throw the center of balance off, which could cause the ladder to fall. Using Objects as a Ladder - Using scaffolding, chairs, stools, or other objects to reach high areas can be dangerous. These things aren't meant for climbing the same way a ladder is. Climbing too High on Ladders - One should never step onto the upper rungs of a ladder. Depending on how the ladder is placed, even several rungs down can be unstable. 2. Lack of Visual Communication The noise in many workplaces can be quite deafening at times, which can make it difficult to communicate. When it comes to safety, communication is essential. This is why it is so important to have visual communication options in any loud workplace. Visual communication can come in many forms including

Eliminating Awkward Postures For most companies, the work that employees perform on a daily basis can be quite physical. This type of physical labor can lead to a wide range of injuries. Of course, to improve on workplace safety it is important to do all you can to help reduce the amount and severity of these types of injuries. One easy place where you can start is with the different postures that employees take while performing their day to day activities. In many cases, they put themselves in awkward postures, which increase the risk of injuries to the back, neck and other parts of the body. Fortunately, there are typically alternative ways to do things or even tools that can do those tasks for them so they can avoid injury. According to OSHA: Working in awkward postures increases the exertion and muscle force an employee must apply to complete a task and compresses tendons, nerves and blood vessels. In general, the more extreme the postures the more force is needed to complete the task. Examples of awkward postures include performing overhead work, bending or twisting to lift an object, typing with bent wrists, and squatting. The important thing is helping to identify the awkward postures, and help find alternatives for the employees. The following five positions should be removed from the workplace as much as possible so that employees can complete their work with as little risk for injury as possible. 5 Awkward Postures that Should be Avoided 1. Working with Arms above the Head The first awkward posture that is commonly seen in workplaces is trying to complete tasks with your arms above the head. There are many examples of this, some of which could include holding up a board while it is secured in place, or even painting a ceiling. Any time you are working with your arms over your head, you are putting added strain on your back. In addition, your arms are going to fatigue much more quickly than they would in a more natural position. This can put you at r

Since the inception of factory production in the industrial revolution, safety has been a concern. However, safety today looks nothing like it did back then. We now have OSHA and other government groups, unions, and lobbies that safeguard the safety of workers and make sure that they are adequately provided for. In addition, workers themselves have more rights in suing an employer over unsafe conditions and receiving compensation in the event of an incident that leaves them injured. Especially if an injury prevents them from providing for their family. The point is, a lot has changed over the past few hundred years in workplace safety, and those changes have unanimously been in the best interests of the workers that inhabit those workplaces. However, just as changing times caused safety evolution in the past, it is important that this trend continues now with the advent of things such as the internet, tablets, smart phones, and more. Safety is no longer limited to physical seminars and training sessions. That being said, let's take a look at exactly how you can use technology and engagement to enhance your safety efforts. eNewsletter to Employees One way that employers are reaching their employees both in a new way and outside of the physical confines of the work area is through email newsletters. The vast majority of working adults (and most every demographic, for that matter) are online these days and employers need to make sure they are taking advantage of that online time and platform. Formatting an email newsletter is great because it can be easily sent out to every single employee in your workforce. This can be used for general company news and the like, but can also be used to send out weekly safety lessons or reminders for employees about any witnessed unsafe behavior. To get started down this round, you'll need to make sure your emails get opened and engaged with. Here are a couple of ways to do that: 1. Keep your subject lines short but catchy. Sub

One of the most common injuries plaguing nearly any industrial business is the eye injury. The human eye is susceptible to damage from a variety of different sources, however, most eye injuries stem from exposure to chemicals, paints, solvents, allergens, sawdust, laboratory materials, etc. However, it is important to remember that nearly ninety percent of all eye injuries are preventable when proper procedures are followed and adequate eye protection is used. The right type of goggles, depending upon the job, can protect the eyes from coming into contact with nearly any eye irritating contaminant. Nonetheless, eye injuries still seem to occur and businesses need to be ready and prepared just in case an eye injury does happen. One of the best ways to provide immediate support to an injured eye is to utilize the help of an eyewash station. Guidelines for Eyewash Stations When it comes to the safety standards related to primary eyewash stations, OSHA sets the overall requirements. However, it is ANSI (American National Standards Institute) that is the entity who provides the necessary guidelines that employers must follow regarding the design, type, performance, location, and details specific to any eyewash station. Even though the ANSI z358.1-2009 covers the guidelines for all types of eyewash equipment such as emergency showers, eyewash stations, face washes, and combination units, we are going to focus on guidelines related to eyewash stations. Tips for Compliance with ANSI's Eyewash Standard Every Second Counts! - When an eye injury occurs every second really does count. An eye injury can go from bad to catastrophic in mere seconds if the eye is not properly flushed. ANSI mandates that all eyewash be located just a short 10 second walk from any eye hazard. The path to the eyewash station must well lit and remain clear and free of debris. The eyewash station must also be properly identified with an eyewash station sign. Yes, the Water Does Matter - there

Your facility probably has many written safety procedures-hazard communication or emergency response, for example-but do you have a comprehensive health and safety management system (HSMS)? OSHA mandates many kinds of safety plans, but there is no federal mandate regarding a health and safety system that covers all other safety plans (though some states do require one). This system governs how safety works in your facility and gets everyone involved. If OSHA doesn't require an HSMS system in your state, then why bother implementing one? While a safety system does require a lot of work, the benefits are numerous. Not only will employee morale improve, the number and severity of injuries will be reduced and production may actually increase. Safety, it turns out, is good for business. OSHA also recognizes businesses that have used effective HSMS to achieve lower-than-average injury and illness rates through their Voluntary Protection Programs. Data suggests companies that have developed these kinds of safety systems have seen positive results. According to OSHA: "Companies in OSHA's Voluntary Protection Program, VPP, all of whom have implemented comprehensive safety and health management systems, experience lost workday incidence rates that are 60% to 80% lower than their industry counterparts. They also experience reduced absenteeism and turnover, improved productivity, and lower Workers' Compensation costs. Safety and health management works and adds to the company's bottom line profits." Getting a health and safety system started at your workplace takes a lot of legwork, so let's take a look at how to begin and how to get everyone from management to employees on the work floor involved. Management Leadership Business-Meeting-1 For a health and safety system to be effective, it can't just be left entirely up to a safety manager. Management needs to set the tone for the program and demonstrate their commitment to it by providing necessary polic

The Occupational Safety and Health Administration or OSHA is dedicated to the health and well-being of employees while on the job. Day in and day out employees are exposed to potentially dangerous situations based upon their specific job functions. Whether a person is employed at a manufacturing facility, an auto body shop, or within a large warehouse, OSHA regulations aim to provide the warnings needed to keep hazards at a minimum and keep employees informed about their surroundings. One of ways in which employees are kept informed about the hazards and dangers within their work environments is through the usage of warning labels. Types of OSHA Warning Labels and Signs The term warning label or sign can be used interchangeably in regards to OSHA's recommendations for hazard warning. There are basically three types of labels or signs outlined within OSHA 1910.145 and they are used to indicate danger, caution, or general safety instruction. Danger Sign/Labels: Danger labels or signs should feature the colors or red, black, and white. Employees should be informed that whenever danger signs or labels are posted they should exercise extreme caution as many hazards are immediate. This does not mean dangers are possible, it means they are imminent if certain things were to happen. Caution Sign/Labels: Any signage or labels indicating caution should feature a yellow background with black lettering. Caution labels or signs should be used to inform employees about potential hazards. This is unlike danger signs, since dangers signs indicate certain dangers that ARE there, while caution indicates that hazards are just simply POSSIBLE. Safety Instruction Sign/Labels: The standard background should be white, with black letters upon the white background. In addition, on the panel, green with white letters may also be used. This type of warning label or sign is used when general information related to certain safety practices is available. Furthermore, OSHA indicates in 19

Transforming into a tech company has become top of mind for executives in all major industries. It is clear that modern technology will fundamentally alter what and how business is done in every domain, sector, and industry. This has led to a call to arms in every enterprise to understand how they can transform into a tech company. The Tech Company Magic Tech companies have fine-tuned the art of bring new digital products and services to the market, quickly, efficiently and effectively and understanding customer feedback to iterate and improve. This capability makes them incredibly agile and leads to faster experimentation that is cheaper and involves less risk. In turn, this enables them to bring new capabilities to the market and even if all do not succeed or get traction, a few do and that drives innovation, customer satisfaction, and growth. From the outside, tech companies appear to be massive juggernauts that are unstoppable and able to crush everything in their path. The 'Non-Tech' Technology has been leveraged in every sector and industry, however, it has almost always been treated as a means to an end, something that is required but never the real value driver for the customer. This has led to the typical organizational structure in enterprises into "Business", "Operations" and "Information Technology". The "Business" arm generates value for customers, the "Operations" team carries out the requirements of the Business team and the "Information Technology" team provides the systems (databases, network and compute) required to "keep the lights on" for the Operations and Business Teams" This structure served enterprises well in the last decades as customers did not have an alternative to directly working with the enterprise and this fortified the value supply chain and also established a hierarchy of sorts within the enterprise where the business looked down upon operations who looked down upon technology. The purpose of

Enterprises across the board have a lot of untapped potential in their data. The data is not only relevant and useful within the enterprise but can be a valuable source of insights for the enterprise partners and customers. In some cases, the value of this data can be high that partners and customers are willing to pay extra to get access to this information at a certain fidelity, freshness or scope. Enterprises that do not have a clear and coherent monetization strategy are leaving money on the table. In addition, they stand to lose customers to competitors who gain the first movers advantage by addressing this market need. The Value of Data The first step in determining a monetization strategy is an audit of the enterprise data assets and a determination of the customers who are interesting and willing to pay a premium for access to this data. The Value of Data is proportional to the following: Freshness The more "fresh" a dataset is higher its value typically. This is because there is an advantage in the early visibility provided by first access to new information. 'Freshness' is defined the latency between the creation of data and the delivery of the data to the consumer. Consumers of data will pay a premium for fresh data if it fits into their decision and action strategy. Fidelity Higher the "fidelity" of data i.e. how much detail a particular data point carries also increases the value of the data in the eyes of the data consumer. Higher fidelity data offers more information and detail enabling the consumer to design highly valuable analysis that leverages the additional details offering a deeper insight into the situation at the present or historically. Raw The more "raw" a data set, higher its value as it can support a much larger set of analysis scenarios that a processed data set could support. Data sets that are aggregated, sampled, filtered or transformed can have a lower value as they can severely limit the type of analysis. Raw

Sentiment, Sentiment Analysis, Sentiment Tracking have become a hot topic with multiple 'AI' startups focussing on providing sentiment driven insights to enterprises. The number of such startups points to the potential that enterprises see in Sentiment analysis and the impact it has on how the enterprise plans, operates, executes and delivers value. Sentiment Analysis is process of extracting sentiment (emotion or feelings) captured in signals that are embedded in various types of media such as print, text, audio, video, images etc. For example, if a reporter submits a report on a particular enterprise, the sentiment embedded in the article can point to how excited, worried, upbeat or impassive they might are about the enterprise. This sentiment can be then used by the enterprise to understand the perception about the enterprise that the external market carries and whether that perception is improving, degrading or staying unchanged. This insight can be used by the enterprise to improve their go to market plans, change their PR strategy or even go deeper and change their product strategy. Sentiment Analysis Is Not New The tracking, measurement and use of Sentiment is not a new scenario. Enterprises have been leveraging the output of sentiment analysis for a long time. User surveys, focus groups, market research, customer interviews etc. are all examples of generating data to perform and track sentiment. Similarly, influencer marketing through association with influencers or events or organizations with a certain perception or sentiment associated with them is a common technique to improve the enterprise's own sentiment. Sentiment Analysis and strategizing based on the analysis is a common and required function for any enterprise. Sentiment Analysis Using Artificial Intelligence With the advent of Artificial Intelligence (AI), enterprises now have another technique in their kitty to understand how they are perceived in the market and how that perception i

Fire extinguisher Maintenance Fire extinguisher servicing or maintenance is required annually as per British Standard BS BS5306:Part 3:2009. This is carried out to ensure that the extinguishers are safe and will always function in the event of a fire. Independent Fire Services will always carry out maintenance to BS5306:Part 3:2017. Ensure your fire extinguishers are supplied and maintained to the highest standards by always using a third party accredited company such as Independent Fire Services Ltd which is accredited with BAFE (British Approvals for Fire Equipment). To gain this accreditation the company had achieve ISO 9001. Our engineers must do extinguisher maintenance re-fresher training every three years and also have an external audit within the same time frame. Fire Extinguisher Supply Independent Fire Services supply extinguishers of the highest standard. All of our fire extinguishers are supplied to BS EN3 standards and are BAFE approved and carry a five year guarantee if maintained by us. The range of fire extinguishers we offer includes: . Water extinguishers . CO2 extinguishers . Foam extinguishers . Powder extinguishers . Wet chemical extinguishers . Specialty Extinguishers Fire Safety Training Current UK legislation requires employers to provide training in the actions to be taken in the event of fire. We can help you meet this requirement by providing a range of comprehensive fire training courses, that include: Basic Fire Safety Fire Safety Awareness Fire WardensMarshall Training Train The Trainer Ensure you comply with government legislation and read more about our fire training courses. Dry Riser Testing and Maintenance In buildings which have Dry Risers these must comply with British Standard BS9990:2015. The annual testing and maintenance of Dry Risers is the responsibility of the property owners or managing agents. British Standard 9990:2015 recommends that the system is visually inspect

When it comes to safety, we all want to do our best and keep our workers out of harm's way. However, wanting and doing are two different things, and governing safety bodies like OSHA are there to make sure that the "doing" part gets done. In fact, OSHA can come inspect a factory or workfloor without notice. While they aren't trying to trick you, they do want to make sure that people who aren't following the rules are caught a bit off guard so that anything that needs fixed can get done before someone gets hurt. In general, if you're doing what you're supposed to and following the rules (and keeping on top of recent updates) you've got nothing to worry about. However, here are a few things you can do to make sure that your visit goes over smoothly and that you get a stellar review from the organization. Do Your Own Inspections One of the easiest ways to prepare is to do your own inspection or have someone come in and do one for you. The point is that it can be easier to catch things and have a unique perspective when actually walking through and putting yourself in the mindset of someone outside of the company, whose sole concern is safety. This kind of thoroughness will trump looking through a safety checklist and thinking "yep, did that one" every time. The other great thing about a mock inspection is that it will condition/get your workers used to having a third party evaluate them and watch them at work, which brings us to… Prepare Your Employees One problem that can come up throughout the course of an OSHA evaluation is employee behavior. Sometimes, being watched can be nervewracking, and for others it can be insulting to have someone glancing in their direction and scribbling something down on a clipboard. In your mock inspections, you can let people know that it's nothing to worry about and that in the event someone does come in to observe, they can just continue working as normal because they're doing everything right already. Ev

BlueHost and SiteGround both are the fierce competitors in the world of web hosting service providers. Find here the detailed comparison between bluehost and SiteGround.

As a prominent and provider of best content writing services, we excel at delivering content adhering to global standards. We are one of the top content writing company which provides world-class and unique content across India. Contact Richa Content Writer for more information.