Group items tagged

Does your facility have pipes? If so, those pipes need labels. While pipe labeling may seem like a confusing process with many requirements, it doesn't have to be difficult. Starting with a plan will make your pipe-labeling project easier and more organized. Then once your facility's pipes are labeled, you'll see communication about pipes improve. Using visuals like labels makes communication direct and simple, and it reduces the need for asking questions about pipe contents. Before you begin marking pipes, you should understand the basics of pipe marking. Take a look at these seven things you should know before you begin the pipe-marking process. 1. Workers Need to See Pipe Labels, and So Do Emergency Personnel Labeling pipes will primarily help your workers and any maintenance personnel who may need to service pipes. Therefore, you'll want to keep this main audience in mind when you establish your pipe labeling system. It's possible you'll have additional people who enter your facility and need to know what's in your pipes, though. In an emergency situation like a fire, emergency responders may need to know which pipes contain fire-quenching liquids. If an accident involving a pipe containing chemicals occurs, an emergency response team would quickly need to know what chemicals it's dealing with. Because these additional members of the community may be reading your pipe labels, it's important to follow industry standards for pipe labeling instead of having an internal system that only your workers understand. 2. Colors Should Be Standardized Pipe Marking, Pipe Labels To make it easy for workers, emergency responders and other pertinent personnel to read and understand pipe labels, the labels should be color-coded according to the ANSI/AMSE 13.1 standard. The standard assigns six main colors for pipe contents: Yellow Background with Black Text - Flammable Fluids & Gasses Red Background with White Text - Fire-Quenching Fluids Orange

Large scale industrial units are devilishly hard to manage. There are hundreds of employees working under an establishment and the number of equipment, tools and machine components used are countless. If the tools and equipment are not categorized and stored systematically, then a lot of time is wasted in finding the appropriate tool or machine component before starting any job. To minimize this waste of time, the tools, equipment and different machine components are kept on different racks, which are categorized by rack labels. The labels distinguish the racks from each other and tell the employees what is stored in which rack. This article is going to discuss the need of getting the racks labeled, and the different types of rack labels available in the market. There are different types of rack labels available in the market such as the polyester warehouse label, multi level rack warehouse signs, magnetic warehouse labels, cold storage labels, cold storage rack placards, cover-up labels. These different varieties of labels are used for different types of storage units. Let us discuss in depth the different types of rack labels. The polyester warehouse labels are the toughest labels in terms of the physical abuse, shocks and harsh industrial conditions, they are withstood. These levels are better than the paper labels because they are tear resistant. There is a polyester film over the labels which protect the text from chemicals and abrasion. The adhesive used on the polyester labels help in creating strong bonds over any kind of surface. The labels are available in all kinds of custom sizes and shapes. The multi level rack warehouse signs are designed to get rid of the requirement to have long range scanners as they help in identifying multiple rack labels with one single label, which contains information about all the racks. The magnetic warehouse labels come handy when the labels are needed to be relocated over and over again. The labels are provided with mag

If you are planning on purchasing an industrial-grade thermal label printer, you need to weigh several factors. Let's face it, these kind of machines are not cheap-they aren't like the flimsy ones that folks buy to make organizational labels for their home, or for scrapbooking-these are commercial level equipment, and they're designed to hold up to all the rigors of an industrial operation. Pipe Marking Labels So, with that in mind, here are the top 6 factors you should consider before you buy an industrial label maker: 1. Purpose: First off, what do you need to make heavy-duty labels for? Sure, these types of printers can make funny bumper stickers with a catchy slogan on it-but what do you REALLY need it for? Common uses for these are for making lots and lots of pipe markers, arc flash labels, and NFPA 704 "diamond" signs. They're also great for making safety slogans, caution and warning signs, 5S, lean, kaizen, and traffic marking stickers. Depending on how many you need, you might need to use it every day, or for sporadic printings throughout the year. These printers are great, because most of them can print on label tape up to 4 inches wide, and can spit labels out much quicker than those store-bought consumer ones. They can also take the heat and tougher environments of factories and warehouses. 2. Durability: Modern label makers are nearly flawless at their job. They use thermal transfer ribbons and heat seal the text or graphics from the ribbon to a compatible thermal label. This allows for a product that will last for many years before seeing much physical degradation or fading. They are water-resistant and even resist chemical wear. 3. Ease of Use: Many label makers come with their own proprietary software, but I would recommend buying a label maker that can be used with any kind of word processing software or even programs like Photoshop. This way, if you have a change in employees, move offices, or just plain lose the or

The Occupational Safety and Health Administration or OSHA is dedicated to the health and well-being of employees while on the job. Day in and day out employees are exposed to potentially dangerous situations based upon their specific job functions. Whether a person is employed at a manufacturing facility, an auto body shop, or within a large warehouse, OSHA regulations aim to provide the warnings needed to keep hazards at a minimum and keep employees informed about their surroundings. One of ways in which employees are kept informed about the hazards and dangers within their work environments is through the usage of warning labels. Types of OSHA Warning Labels and Signs The term warning label or sign can be used interchangeably in regards to OSHA's recommendations for hazard warning. There are basically three types of labels or signs outlined within OSHA 1910.145 and they are used to indicate danger, caution, or general safety instruction. Danger Sign/Labels: Danger labels or signs should feature the colors or red, black, and white. Employees should be informed that whenever danger signs or labels are posted they should exercise extreme caution as many hazards are immediate. This does not mean dangers are possible, it means they are imminent if certain things were to happen. Caution Sign/Labels: Any signage or labels indicating caution should feature a yellow background with black lettering. Caution labels or signs should be used to inform employees about potential hazards. This is unlike danger signs, since dangers signs indicate certain dangers that ARE there, while caution indicates that hazards are just simply POSSIBLE. Safety Instruction Sign/Labels: The standard background should be white, with black letters upon the white background. In addition, on the panel, green with white letters may also be used. This type of warning label or sign is used when general information related to certain safety practices is available. Furthermore, OSHA indicates in 19

The piping in many facilities can get quite elaborate, with different pipes going in virtually every direction. The fact that each pipe is used to transport different solutions, makes it is absolutely essential that you follow pipe marking best practices in order to keep everyone safe. It is not enough to simply have the pipe labeled right at the spout or faucet, though that is certainly a good start. You also need to make sure the rest of the pipe is clearly labeled so that people who are performing maintenance or other work on them will not have any issues knowing exactly what is contained within the pipes. With that in mind, take some time to review the following 10 best practices for pipe marking, and double check to make sure your facility is up to speed. 10 Best Practices for Pipe Marking Best Practice #1 - High Quality Labels Labeling pipes is not an easy task. In most cases, these pipes are located quite high in the facility, so working on them comes with its own set of hazards. In addition, it can be time consuming and disruptive since you will need to use a ladder or lift to gain access to all the pipes. With this in mind, you always need to make sure you are labeling your pipes with the highest quality label stock possible. Vinyl labels, for example, will stick well to the pipes and can last for years. If you are labeling a pipe that carries steam or hot liquids, you will want to make sure to choose pipe marking labels that are specifically designed for high temperature. When you use the highest quality labels, you won't have to replace them again for many years, which can help keep your facility safe and running smoothly. Best Practice #2 - Standard Color Labels It is always a good idea to follow the industry established guidelines for the color of the labels you use. ANSI has a color scheme that is largely used across all industries, which effectively makes it a best practice. Even if you are not legally required to follow this set of standa

Improve Organization and Efficiency with Industrial Labeling Industrial labeling is an essential activity in any facility, and for many different reasons. For example, it can help to improve safety as well as organization and even efficiency. In fact, proper labeling can benefit almost every measurable area of the facility. If you don't already have a proactive labeling policy within your facility, look at the following ten points to see why it is so important. 1. Regulatory Compliance One of the most important reasons why you need to focus on proper industrial labeling is that it is often required by organizations like OSHA. If you are using certain hazardous chemicals, for example, you will need to have the containers labeled using the proper industry standards. In addition, you must put these types of labels on any products that contain these chemicals before you ship them out. There may be other regulations where you need to have proper labeling too. Machines and pipes that use or transport hazardous items will often need to be properly labeled. Even if it is just steam that is being transported, you should likely have it clearly noted so nobody accidently burns themselves while working in the area. 2. Tracking Maintenance Tasks Many facilities will use industrial labeling to distinguish different machines or vehicles within the facility. This is much easier to use than checking the VIN or serial number each time, and it can make scheduling the maintenance of these items much easier. If you have an industrial label maker, you can print off a label that has a bar code or other easily identify mark. This can then be scanned by the maintenance team every time they change the oil or perform any other type of work. This can help them to log all the activities they have done, and even make it so all their activities are tracked through computer programs. However you decide to actually track and store the information, you will find that having each machine ta

GHS Label Information When it comes to labels, few are better known than the GHS labels (even if people don't always realize that is what they are called). GHS, or the Globally Harmonized System, is an international set of standards that are agreed upon to help ensure people from across many industries and around the world are all using universally recognized standards. This includes standards when it comes to the classification and labeling systems used for dangerous chemicals. The GHS labeling standards are used by regulatory agencies as well, including OSHA. While GHS is not itself a legal regulatory agency, most companies are required to follow their standards in this area because of the fact that their standards are adopted by governmental bodies. Common GHS Terms Whether reading GHS labels or making them, it is important to be aware of some terms that are commonly used. SDS - Safety data sheets are required to go along with most GHS labels. These data sheets can provide more detailed information about chemicals and other potentially hazardous materials. Class - Different types of hazards are broken up into different classes. Gasses that are under pressure would be one class. Acids could be another, just to give some examples. Hazard Groups - Hazardous materials are broken down into three groups, environmental, physical and health. Hazard Statement - Hazard statements are standardized to describe specific hazards. These statements give brief but essential pieces of information about the items being labeled. Precautionary Statement - This is a statement that provides instructions on how to avoid dangers when working with these materials. Signal Words - Signal words are DANGER and WARNING. Danger is to indicate a higher level of risk, while warning is for when there is a potential for harm but it is not quite as serious. Pictogram - Pictograms are the visual representation of specific risks. Typically they will just be a black image that is ea

The process of pipe labeling is essential to minimize hazards within an industrial work environment. Pipes may contain a variety of different substances such flammable liquids, pressurized liquids, acids, wastes, water, etc. Pipes can extend for miles within industrial work settings and even though some pipes may not contain hazardous substances, it is still imperative to identify the contents within the pipes as well as the directional flow and pressure within the pipes. What is ANSI Color Coding? ANSI or American National Standards Institute is a privately owned, non-profit organization that is involved with creating consensus standards regarding workplace safety. In order to help ensure safety and the proper labeling of pipes, ANSI along with ASME (American Society of Testing and Materials) have developed a color coding system so the contents of pipes can be quickly and easily identified. The newest version of the ANSI Color Coding guide from 2007 features the use of six colors, versus the old version which focused primarily upon the use of four colors. The related hazards and colors are as follows: Hazard Colors Fire Quenching Fluids Red Background with White Lettering Corrosive & Toxic Fluids Orange Background with Black Lettering Flammable Liquids Yellow Background with Black Lettering Combustible Liquids Brown Background with White Lettering Potable, Cooling, Boiler, Water Green Background with White Lettering Compressed Air Blue Background with White Lettering In addition to the above six color codes, ANSI has also identified four other colors that may be utilized at the discretion of the user for other fluids that do not meet the specifications of the above content colors. The other colors are as follows: User Discretion Purple Background with White Lettering User Discretion White Background with Black Lettering User Discretion Gray Background with White Lettering User Discretion Black Background with White Lettering Pipe Label Placement In addition

Ok, let's be honest here. Unless you are a safety professional, or you work closely with safety professionals, the chances are that no one has really told you anything about pipe marking, right? But for those of us lucky enough to work in this industry, it quickly becomes all too clear that there is an endless amount of information available about this very narrow topic. Unfortunately, about 99% of the information that people learn about pipe marking is just reiterating the standards and regulations that are put out by OSHA and other regulatory bodies. Now, make no mistake, this information is absolutely critical to learn and follow. The fact is, however, that there are A LOT of other things that someone who works with pipe marking should know. We've put together some helpful tips, tricks, information, and advice that covers a wide range of pipe marking related topics to help ensure your pipe marking strategies are as effective as possible. If you have any other 'secrets' of pipe marking that you don't see here, please contact us below so we can help pass them along in the future. Choose Your Materials Wisely Everyone knows that you can't just use the normal label materials that are basically paper with a little glue on the back, which you might buy at Office Depot. There are, however, lots of different types of industrial labeling materials out there, and picking the right one for the right area is essential. Here are several essential points to be aware of: Pipe Materials - Did you know that normal vinyl labels can cause corrosion on pipes made of nickel and stainless steel? If you have this type of piping, make sure you opt for labels that are identified as 'low halide' to avoid this potentially disastrous risk. Know the Weather Risks - When labeling outdoor piping, you need to keep weathering in mind. Most label materials are water-proof, but the constant change in temperature, humidity, wind, and more can really be rough on pipe markings

Improving Hazard Communication in the Workplace Hazard CommunicationIf you're looking for ways to improve the overall safety of your facility, one of the best places to start is with an evaluation of your current hazard communication standards. According to OSHA, hazard communication violations are the second most commonly cited violations, as of 2012. In 2012 there were 4696 citations given in this one area alone. Sadly, very little has been done to change this problem over the past several years. Understanding how your facility communicates any type of hazard, and working on ways that can be improved, is an important part of keeping everyone safe. One of the best places to start is to review the OSHA regulation on this topic, which is titled, "Hazard Communication - 1910.1200." This will give you all the requirements that you will need to follow in order to keep people safe, and avoid any citations. Key Points in Section 1910.1200 After reviewing the entire section on this topic, you will want to go back and really focus on a few key points. These are some of the areas where most of the citations were given out, and also where some of the biggest risks exist. The following key points will be great places to start when it comes to improving the way your facility handles hazard communication: 1910.1200 (b)(2) - This is the section that covers how you need to communicate hazards that apply to any chemical that exists in a way that employees could become exposed to it. This applies to both normal exposure, and exposure during a foreseeable emergency. 1910.1200(b)(3)(i) - In this section, it details the requirements a facility has concerning the labeling of chemicals that come into the facility. Specifically stating that the labels may not be removed or defaced. 1910.1200(b)(4)(iii) - This area explains in detail that employers need to provide employees with sufficient training on how to react to a potential chemical spill. This includes how to

Effective marketing also means effective communication with existing and prospective clients, so every business should make an effort to come up with methods to establish a connection with their clients. If you are operating a business, you must be aware that one great method to achieve this is to come up with excellent signage that will serve as a bridge between your business and your customers. With this, you may want to consider purchasing label maker software that will accommodate of your label printing needs. Why Opt For Label Makers? It is a fact that you can go about and look for commercial label printing if you want to accomplish the branding and labeling needs of your business. However, doing this can lead to higher marketing expenses which would have been reduced if you just depend on label makers. A lot of companies are opting for label makers for many good reasons like the following: They are simple and very convenient to use Very flexible as they can help produce labels of varying sizes Can reduce the business operating cost by a huge percentage Can be used for small and large scale marketing levels Very affordable and comes in different types and designs Depending on the size and output of different labeling and sign printing machines, using a label maker serves as a great way to establish a business without having to spend huge sums on expensive marketing strategies.

The GHS and You - 5 Big Changes April 10, 2014 by Tony Ferraro If your workplace handles chemicals, particularly as the initial producer or as a distributor to clients, it's time to familiarize yourself with the global harmonization system (GHS) of classification and labeling chemicals, or the GHS, for short. What is the GHS? The GHS, first proposed to the United Nations in 1992, is an attempt at bringing some uniformity to the chemical labeling procedures of the developed world. Member nations, based upon their own time-frames, signed on to promise to convert to the GHS method of labeling chemical substances by a certain date. The idea was and still remains to make international business and production easier by having chemical labeling procedures that wouldn't slow down import and export, and would be easy for everyone involved to understand. This also greatly reduces transport costs as materials aren't having to be re-labeled or re-inspected as they cross borders. Last, but certainly not least, the GHS protects workers by ensuring the risks of handling any given material are clearly stated in an easy to understand manner from the beginning. According the UN's publishing of a GHS guide, the following are succinct statements of the GHS' most important goals: Defining health, physical and environmental hazards of chemicals: Creating classification processes that use available data on chemicals for comparison with the defined hazard criteria; and Communicating hazard information, as well as protective measures, on labels and Safety Data Sheets (SDS). OSHA.gov - GHS What does this mean for me? In the United States, the time-frame for adoption is staggered over several stages. On March 2012, the final rule for how workplaces should adopt their policies was published, and employees were required to be trained on these new procedures by December 1, 2013. Interestingly enough, the adoption of the standard by product manufacturers is not required until Ju

How to Create Bumper Stickers for Your Sticker campaigns For everything from political campaigns to social causes and beyond, cars adorned with bumper stickers are a regular sight across the country. Regular stickers, even more common, are a staple of our world from a young age, and an easily recognizable object for even children. Have you ever wondered how they're made? Sure, there are many companies that print stickers and the like in bulk for a third party, but there are also countless custom sticker campaigns floating about with highly customized messaging, some of which sprang up nearly instantaneously from their creative parties. These aren't cheap, flimsy creations either, some of them are the backbones of grass roots organizations that have changed the way we think and live our lives. Whatever your idea or needs, you're reading this because you want to create your own stickers, labels, or some other similar creative piece with professionalism and reliability. Let's take a look at exactly how you might get that done. Step One - Get Your Printer Especially if you're going to be producing large quantities of whatever you're making, it will be important that you have a reliable printer that isn't going to break down on you. For this reason, I'd suggest a thermal printer. Thermal printers have relatively few moving parts compared to traditional printers. Thermal Printers 101: The primary way in which thermal printers differ from traditional inkjet type models is that they use heat to transfer or even produce text and images. There are two subtypes: thermal transfer and direct thermal. Thermal transfer printers heat an inked ribbon which is then rolled over a paper or high-graded vinyl, transferring an image. Direct thermal printers work with thermal-chromatic paper, but do not require any ink. A heating element is pressed against the paper in the pattern of the text or imagery desired, and the paper responds by changing color in those places.

The pertinent use of safety stickers and labels is a must within any industrial work environment. Safety stickers and labels serve many functions, first and foremost, they help to warn or inform employees and visitors of any specific safety concerns. Additionally, they also serve as handy informational reminders from identifying the contents within certain pipes, to showing where recycling may be located, all the way to highlighting the location of a safety eye wash station. Since the need for safety stickers is so important, yet so diverse depending upon the type of business, it may be difficult to locate all the specific stickers and labels needed. One way to easily combat the rising costs of utilizing outside retailers for safety stickers is to simply make your own. Believe it or not, printing your own safety stickers is generally faster, easier, and more cost efficient. Printing Safety Stickers If you've never considered the option of printing your own safety stickers, right now is the time to start. With advances in technology, some label printers are able to efficiently print bright and colorful, commercial grade stickers and labels. One label printing product currently on the market that rivals most others in price, quality, and ease of use is the LabelTac 4 PRO. This printer has proven time and time again to produce high-quality, dependable, colorfast labels that outperform most other safety stickers available on the market, and the best part is they can be printed in-house right from your own office. The LabelTac 4 PRO is capable of creating indoor and outdoor labels that are both weather and fade resistant. Furthermore, the ease of use with the LabelTac 4 PRO is simply impressive to say the least. It is compatible with nearly any Windows-based programs including well-known products such as Microsoft Office, OpenOffice, and Excel. However, even if you don't utilize Windows-based software the LabelTac 4 PRO comes equipped with its own easy-to-use Barte

Complete your workplace labeling projects fast with a LabelTac® 4 Starter Bundle. You'll get all the tools you'll need to start printing labels right away: a LabelTac® 4 printer, multiple colors of label supply, two colors of print ribbon, and label creation software. With this bundle, you can create indoor/outdoor labels and signs up to 4" tall and 40" long that are resistant to UV rays, water, chemicals, and other wear and tear. This bundle will simplify any labeling project and produce labels that will last 5+ years.

Workplaces today are extremely safe compared to what people had to endure generations ago. This is in large part because of the increased focus employers have put on workplace safety. Employers made this effort for a variety of reasons including regulatory pressure, the best interests of their employees, and of course, the fact that a safe workplace is a more profitable workplace. Despite all the great strides that have been made, many workplaces are still quite hazardous. The following 10 workplace safety mistakes illustrate just how far many industries still have to go. They can also help spur ideas for where improvements can be made in your facility. 1. Using Ladders Improperly One of the most common and most dangerous workplace safety mistakes is failing to use a ladder properly. People make many ladder-related mistakes in the workplace, all of which can be devastating. The following are just a few of the more common examples: Unsteady Ladders - If you don't take the time to properly steady the ladder when setting it up, it could easily slide out while you're on it, causing serious injuries. Leaning from Ladders - When working on a ladder, you should never reach off to the left or right as that can throw the center of balance off, which could cause the ladder to fall. Using Objects as a Ladder - Using scaffolding, chairs, stools, or other objects to reach high areas can be dangerous. These things aren't meant for climbing the same way a ladder is. Climbing too High on Ladders - One should never step onto the upper rungs of a ladder. Depending on how the ladder is placed, even several rungs down can be unstable. 2. Lack of Visual Communication The noise in many workplaces can be quite deafening at times, which can make it difficult to communicate. When it comes to safety, communication is essential. This is why it is so important to have visual communication options in any loud workplace. Visual communication can come in many forms including

Waste water treatment plants are usually operated by municipalities or private utility companies, and are regulated by the states wherein they reside, but their standards were enacted by the U.S. Environmental Protection Agency (EPA). According to the Safe Drinking Water Act of 1974 (amended in 1986 and 1996), all local treatment systems are regulated so that the water they treat is tested for contamination, their improvement plans are reviewed, they have onsite inspection to ensure that machinery and sanitation efforts are functioning properly, that personnel are properly trained, and that they comply with all standards (or face stiff penalties). On top of these regulations are safety expectations imposed by the Occupational Health and Safety Administration (OSHA) under the U.S. Department of Labor. Waste water treatment plants have so many potentially hazardous areas that can impact people, directly and indirectly. Who is Affected? Directly, employees at the plant run the risk of workplace injuries from working around the huge pumps, walking near and above open water treatment containment tanks, agitator pools, furnaces, pipes, and various other facility obstacles, machinery and equipment which can create pitfalls for unsuspecting workers. Indirectly, end users of the treated water run the risk of drinking and using improperly treated water, but this post is primarily concerned with the safety of workers and visitors to the treatment plant. Ways to Make It Safe Pump pipe marking label image from wikipedia Workers who must work near open vats of raw sewage or even treated water should have all opportunities for falling into the water prevented via various safety devices, warning signs, or precautions. Potentially hazardous holding tanks or agitators should have traction tape laid on walkways or catwalks to reduce slipping. All pipes should be clearly marked with pipe marking labels to display what the contents of the pipes are. Any electric panels should b

Make Construction Safety a Priority Everyone knows that construction sites can be very dangerous. The more you know about the types of danger you will face, however, will help you to take steps toward keeping everyone safe. Look over the following 10 safety facts and see what you can learn about how to improve the overall safety of your facility. In addition to using this information to help you to make safety improvements, you can also show these items to the workers at any site so they can be more aware. Some of these facts may surprise people, and cause them to be more aware of their surroundings. According to OSHA, "Nearly 6.5 million people work at approximately 252,000 construction sites across the nation on any given day. The fatal injury rate for the construction industry is higher than the national average in this category for all industries." 10 Tips to Improve Construction Safety Fact #1 - Losing your Load On construction sites people use machines to lift and move all sorts of things on a regular basis. Whether it is lifting wood or metal beams, or you are digging out dirt to prepare to lay a foundation, this is an essential part of most jobs. The vast majority of times this type of activity goes very smoothly and the jobs are completed without incident. The fact is, however, that having loads come loose while in transit is actually a leading cause of injury on construction sites. You need to keep in mind that even if you don't lose the entire load, people can be severely injured from even one thing falling out of a crane or back hoe. With this in mind, people working on site need to know to stay well away from this machinery, and the machine operators need to know to avoid moving items when people are nearby. Fact #2 - Entering and Leaving Heavy Machinery Another safety issue related to working with heavy machinery is related to operators getting on and off of the rigs that they will be working on. While this is something that they of

The Adventure of Reducing Risks and Hazards in the Workplace Whenever starting a new job, it can be difficult to figure out exactly what you should be doing, and how it needs to be done. When I started working at a new facility as a safety manager, I began my first day with a meeting with the facility manager. The meeting was set up so he could tell me what was expected of me in my new role, and provide other details of the job. I was quite surprised when the meeting took less than two minutes, and the only objective I was given was to 'reduce risks and hazards in the workplace.' I asked for some clarification or guidance in what exactly he was looking for, but he simply said that I was hired to improve safety, and he was leaving the task of finding out how to do it in my hands. He gave me a sheet of paper with some information about what resources I had available, including my annual safety budget and told me to get to work right away. I should point out there that I had several years experience as a safety manager at a large company, which is why I was brought in to this new facility. The facility had recently been cited by OSHA for a variety of safety hazards, and there were even some fairly severe injuries that occurred in the previous months. The facility owners made it clear that safety was a priority for them, and they were willing to do whatever it took to pass inspections, and keep the employees safe. Planning My Safety Program While that initial meeting was unique, to say the least, I was also quite excited about the opportunity. It is quite rare that a safety manager is given such flexibility, and I wanted to make sure the manager wouldn't regret that decision. I got to work right away planning my safety improvement program. OSHA Safety Sign Guide I wanted to make some quick changes to help improve safety in the short term, and then also plan out ways to create a culture change within the facility so everyone would be more safety focused. I kne

When shopping for industrial label printers, it is important to find one that is reliable, produces high quality labels and signs, and can keep up with the demand of the facility. Bepop printers excel in all three of these categories, and many others. When evaluated in real working conditions, it is easy to see that these printers will meet or exceed the requirements of even the most demanding situations. There are multiple models created by Bepop, such as the CPM-100G3U and the CPM-200GU. Each one is designed to print, and cut labels for use in virtually any situation. Reliable Printing Bepop printing and cutting machines are manufactured by MAX®. This is a company with a lot of experience building printers that can stand up to the toughest conditions, and their Bepop line is certainly no exception. While it is always best to keep printers as clean and safe as possible, Bepop printers have been tested extensively in dirty and difficult conditions. They can continuously print out great labels and signs in almost any type of environment.