Group items tagged Consider - Blog & Blogging..!!

A Comprehensive Look at Construction Safety - Safety Blog and News - Informing the Work... - 0 views

www.safetyblognews.com/ve-look-at-construction-safety

safety blog news

shared by pintadachica on 19 Jul 18 - No Cached

pintadachica on 19 Jul 18

Every time you step onto a construction site, there are countless hazards that you can come across in just a matter of seconds. That is why construction safety is not something that should be taken without serious diligence and precaution. Whether you are working on a commercial or residential site, or if you are working on a road, demolition, excavation or any other type of construction workplace, taking safety into consideration must be your first priority. Here is a comprehensive look into construction safety and why it can mean the difference between life and death if not given proper attention. Causes of Injury In 2012, 4,383 people were killed on construction sites. The math on that shows that nearly 12 deaths occur every single day around the nation. That number is incredibly high, especially when you consider the prevention that you can take to avoid death or serious injury. Of that number of people who were fatally injured in 2012, their deaths most commonly fell into one of four categories. This includes falls, being struck by an object, electrocutions, or being caught in between two objects. Falls made up for nearly 36% of all deaths, which is the most of the four categories. Second was being struck by an object, 10%, followed by electrocution and caught in between objects, 9% and 2% respectively. You will notice that that doesn't add up to quite 100%, but keep in mind that the remaining injuries that result in death are caused by other factors. But nearly 56% of all total injuries come from one of these four construction incidents. It is estimated that by being more prepared and cautious in the workplace, over 400 construction workers could prevent injury on an annual basis. While some workplace issues are still likely to occur, there is no denying that the potential of these four categories should be the first thing considered on a construction site. Importance Of Prevention The reasons that construction sites should be concerned with their safety

<div class="cArrow"> </div><div class="cContentInner">Every time you step onto a construction site, there are countless hazards that you can come across in just a matter of seconds. That is why construction safety is not something that should be taken without serious diligence and precaution. Whether you are working on a commercial or residential site, or if you are working on a road, demolition, excavation or any other type of construction workplace, taking safety into consideration must be your first priority. Here is a comprehensive look into construction safety and why it can mean the difference between life and death if not given proper attention. Causes of Injury In 2012, 4,383 people were killed on construction sites. The math on that shows that nearly 12 deaths occur every single day around the nation. That number is incredibly high, especially when you consider the prevention that you can take to avoid death or serious injury. Of that number of people who were fatally injured in 2012, their deaths most commonly fell into one of four categories. This includes falls, being struck by an object, electrocutions, or being caught in between two objects. Falls made up for nearly 36% of all deaths, which is the most of the four categories. Second was being struck by an object, 10%, followed by electrocution and caught in between objects, 9% and 2% respectively. You will notice that that doesn't add up to quite 100%, but keep in mind that the remaining injuries that result in death are caused by other factors. But nearly 56% of all total injuries come from one of these four construction incidents. It is estimated that by being more prepared and cautious in the workplace, over 400 construction workers could prevent injury on an annual basis. While some workplace issues are still likely to occur, there is no denying that the potential of these four categories should be the first thing considered on a construction site. Importance Of Prevention The reasons that construction sites should be concerned with their safety </div>

...

Cancel

10 Tips for Finding the RIGHT Safety Signs for your Business - Creative Safety - 0 views

blog.creativesafetysupply.com/safety-signs-for-your-business

safety findings business

shared by pintadachica on 24 Jun 18 - No Cached

pintadachica on 24 Jun 18

Many businesses need and even require the use of safety signs to warn employees and customers of potentially hazardous areas. However, the task of finding the right signs to portray the right message, along with finding a reputable company to provide the signs may be more difficult than originally intended. We are here to ease some of that burden with 10 helpful tips for finding the right safety signs to satisfy your business needs. 1. Identify Areas that May Need Safety Signs Before even beginning a search for a safety sign supplier, the first step in the process should be to accurately identify any areas within your facility that may be in need of safety signage. Think of all areas used by employees and/or customers such as aisles, walkways, fork lift zones, hazardous waste areas, potential slippery surface areas, etc. The key here is to identify all the locations that could pose hazardous conditions so proper signage can be created. 2. Pinpoint Potential Safety Hazards. Once certain areas have been designated as potentially hazardous, the next step would be to determine the actual safety hazards in the area that pose risks. An example of this could include an area where liquids are routinely transported. In this case, a spill may be likely which could endanger employees or customers due to the enhanced risk of a slip or fall. 3. Determine the Message to be Conveyed by the Signage Signs are posted everywhere, from "Watch Your Step" signs to "Employees Only" signs. However, for a sign to be truly effective it must convey a clean and clear message that can be understood easily by nearly anyone. For instance, in a work environment that includes welding, safety signs warning of potential arc flashes may be needed. In this case, a sign should be posted instructing anyone who enters to wear proper protective gear, this sign could read "Warning: Arc Flash Zone Proper Protection Required." 4. Consider the Conditions where the Signs will be Located Now

<div class="cArrow"> </div><div class="cContentInner">Many businesses need and even require the use of safety signs to warn employees and customers of potentially hazardous areas. However, the task of finding the right signs to portray the right message, along with finding a reputable company to provide the signs may be more difficult than originally intended. We are here to ease some of that burden with 10 helpful tips for finding the right safety signs to satisfy your business needs. 1. Identify Areas that May Need Safety Signs Before even beginning a search for a safety sign supplier, the first step in the process should be to accurately identify any areas within your facility that may be in need of safety signage. Think of all areas used by employees and/or customers such as aisles, walkways, fork lift zones, hazardous waste areas, potential slippery surface areas, etc. The key here is to identify all the locations that could pose hazardous conditions so proper signage can be created. 2. Pinpoint Potential Safety Hazards. Once certain areas have been designated as potentially hazardous, the next step would be to determine the actual safety hazards in the area that pose risks. An example of this could include an area where liquids are routinely transported. In this case, a spill may be likely which could endanger employees or customers due to the enhanced risk of a slip or fall. 3. Determine the Message to be Conveyed by the Signage Signs are posted everywhere, from "Watch Your Step" signs to "Employees Only" signs. However, for a sign to be truly effective it must convey a clean and clear message that can be understood easily by nearly anyone. For instance, in a work environment that includes welding, safety signs warning of potential arc flashes may be needed. In this case, a sign should be posted instructing anyone who enters to wear proper protective gear, this sign could read "Warning: Arc Flash Zone Proper Protection Required." 4. Consider the Conditions where the Signs will be Located Now </div>

...

Cancel

Welding Archives | RealSafety.org - 0 views

www.realsafety.org/welding

Welding real safety hot work

shared by pintadachica on 17 May 18 - No Cached

pintadachica on 17 May 18

According to the U.S. Chemical Safety Board (CSB), hot work accidents are among the most frequently reported accidents to that agency. Between 1990 and 2010, fires and explosions near flammable storage tanks caused by hot work accounted for more than 60 fatalities. Unfortunately, these accidents continue to take place. This past July, an explosion occurred during hot work near a storage tank at Omega Protein in Mississippi, killing one worker and injuring another. The tank contained eight inches of water and fish matter, which unknown to workers created flammable gases that led to the accident. When incidents like this happen, oftentimes the people and companies involved haven't sufficiently assessed hazards and properly isolated everything in the vicinity that could be flammable. These types of hot work accidents may not seem as obvious as other hazards associated with hot work such as UV light or welding fumes, but they can be even more deadly. The oil and gas industry often faces these hot work hazards, but so do the food production, paper and wastewater treatment industries, according to a video about the dangers of hot work made by the CSB. WHAT IS HOT WORK? OSHA defines hot work as "any work that involves burning, welding, using fire- or spark-producing tools, or that produces a source of ignition." Welding and cutting occur frequently at many industrial worksites, so it's important for workers involved in these operations to understand the potential unseen dangers associated with these tasks. Flammable gases and vapors can be present near storage tanks, fuel tanks and other confined spaces. PREVENT HOT WORK FIRES AND EXPLOSIONS In 2010, the CSB published a bulletin offering advice for how employers can prevent these types of hot work accidents. In the wake of recent accidents involving hot work and storage tanks filled with organic matter that might not seem hazardous (as was the case at Omega Protein), the organization has reemphasized the im

<div class="cArrow"> </div><div class="cContentInner">According to the U.S. Chemical Safety Board (CSB), hot work accidents are among the most frequently reported accidents to that agency. Between 1990 and 2010, fires and explosions near flammable storage tanks caused by hot work accounted for more than 60 fatalities. Unfortunately, these accidents continue to take place. This past July, an explosion occurred during hot work near a storage tank at Omega Protein in Mississippi, killing one worker and injuring another. The tank contained eight inches of water and fish matter, which unknown to workers created flammable gases that led to the accident. When incidents like this happen, oftentimes the people and companies involved haven't sufficiently assessed hazards and properly isolated everything in the vicinity that could be flammable. These types of hot work accidents may not seem as obvious as other hazards associated with hot work such as UV light or welding fumes, but they can be even more deadly. The oil and gas industry often faces these hot work hazards, but so do the food production, paper and wastewater treatment industries, according to a video about the dangers of hot work made by the CSB. WHAT IS HOT WORK? OSHA defines hot work as "any work that involves burning, welding, using fire- or spark-producing tools, or that produces a source of ignition." Welding and cutting occur frequently at many industrial worksites, so it's important for workers involved in these operations to understand the potential unseen dangers associated with these tasks. Flammable gases and vapors can be present near storage tanks, fuel tanks and other confined spaces. PREVENT HOT WORK FIRES AND EXPLOSIONS In 2010, the CSB published a bulletin offering advice for how employers can prevent these types of hot work accidents. In the wake of recent accidents involving hot work and storage tanks filled with organic matter that might not seem hazardous (as was the case at Omega Protein), the organization has reemphasized the im</div>

...

Cancel

Why You Should Consider Load Balancing in Your Company - 0 views

www.techjeny.org/load-balancing-in-your-company

Why You Should Consider Load Balancing in Your Company

shared by davidjames9001 on 25 Feb 20 - No Cached

davidjames9001 on 25 Feb 20

Why You Should Consider Load Balancing in Your Company

<div class="cArrow"> </div><div class="cContentInner">Why You Should Consider Load Balancing in Your Company</div>

...

Cancel

Is A Private Blockchain the way to go? - The AI Company - 0 views

www.autolearn.ai/...ivate-blockchain-the-way-to-go

autolearn artificial intelligence innovation technology AI company software blockhain design

shared by pintadachica on 13 Dec 18 - No Cached

pintadachica on 13 Dec 18

Blockchain are certain to disrupt almost all industries fundamentally. Though there are technical issues, the idea of utilizing a blockchain to prove ownership, to prevent double spending and to establish trust and transactions in an otherwise trust-deficient world, is gaining excitement and acceptance. More and more enterprises are getting curious about the blockchain and are willing to start investing in learning, prototyping, and building on top of the blockchain technology. Starting out with the blockchain requires investment in a building the domain expertise, establishing the identity, establishing the infrastructure and deciding the blockchain that the enterprise wants to work with. Among these decisions is the question: Should the enterprise choose a public blockchain or a private blockchain. Both have advantages and disadvantages and the question can often come down to what are the short term goals and potential applications that the enterprise wants to build on the blockchain. Public BlockChains The default option when considering blockchains is the public blockchain. This is the blockchain that is truly decentralized, leverageable for any type of transaction and in the case of the Ethereum blockchain, offers SmartContract authoring capability that makes the blockchain very attractive for building contracts that reflect the needs of the real world. However, for an enterprise deciding between public or private contracts, there are some considerations that require attention. Speed and Scalability Public blockchains tend to be slower as they are limited by the number of transactions that can be verified every second and confirmed every 10 minutes. There are several efforts underway to make blockchains faster and more scalable however those will take time to get implemented. Speed and scalability will continue to be an issue and contracts and applications that require instant or near real time execution will suffer from this lack of speed and scale. Se

<div class="cArrow"> </div><div class="cContentInner">Blockchain are certain to disrupt almost all industries fundamentally. Though there are technical issues, the idea of utilizing a blockchain to prove ownership, to prevent double spending and to establish trust and transactions in an otherwise trust-deficient world, is gaining excitement and acceptance. More and more enterprises are getting curious about the blockchain and are willing to start investing in learning, prototyping, and building on top of the blockchain technology. Starting out with the blockchain requires investment in a building the domain expertise, establishing the identity, establishing the infrastructure and deciding the blockchain that the enterprise wants to work with. Among these decisions is the question: Should the enterprise choose a public blockchain or a private blockchain. Both have advantages and disadvantages and the question can often come down to what are the short term goals and potential applications that the enterprise wants to build on the blockchain. Public BlockChains The default option when considering blockchains is the public blockchain. This is the blockchain that is truly decentralized, leverageable for any type of transaction and in the case of the Ethereum blockchain, offers SmartContract authoring capability that makes the blockchain very attractive for building contracts that reflect the needs of the real world. However, for an enterprise deciding between public or private contracts, there are some considerations that require attention. Speed and Scalability Public blockchains tend to be slower as they are limited by the number of transactions that can be verified every second and confirmed every 10 minutes. There are several efforts underway to make blockchains faster and more scalable however those will take time to get implemented. Speed and scalability will continue to be an issue and contracts and applications that require instant or near real time execution will suffer from this lack of speed and scale. Se</div>

...

Cancel

Slips, Trips, & Falls - Creative Safety - 0 views

blog.creativesafetysupply.com/slips-trips-falls

creative safety falls blog

shared by pintadachica on 24 Aug 18 - No Cached

pintadachica on 24 Aug 18

It happens to all of us in every day life, from time to time uneven ground, slippery surfaces, or a momentary distraction can send us tumbling. In most cases, we're lucky to walk away relatively unscathed, but slips, trips, and falls can also cause major injuries and complications. This is especially true in the workplace, where heavy equipment, moving vehicles, and other factors can be involved. Let's take a look at some effective methods you can improve your efforts to prevent these common injuries. Why You Should Care While slips and falls can be serious, we witness minor tumbles more often, desensitizing us to the potential for injury, death, and work loss days as a result. To counter this perception, however, the U.S. Department of Labor put out some startling statistics: According to reports filed, slips, trips, and falls are second only to motor vehicle incidents in accidental deaths every single year. Furthermore, one quarter of all injury claims filed in a year will come from slips and falls, and the estimated work days lost per year to related injuries number nearly 100 million in the U.S. alone - accounting for over 60% of all work days lost. Clearly, there are improvements to be made, and a large cumulative consequence when they are not. Decreasing Trip, Slip, and Fall Frequency caution-wet-floor-signMinimize slippery areas: Depending on the type of business you're in, the areas that become greasy or slippery in your workplace, and the root causes behind them, are going to be different. In a restaurant kitchen or food-related establishment, kitchen floors may become slippery with water or greasy from food scraps. In a production facility, a material spill might leave a floor dangerously slick. In a supply yard, sawdust, dust, or machine grease and grime might account for your most dangerous slipping hazards. While slippery areas are sometimes unavoidable, the length of time areas are slippery can be controlled and minimized. Make it employee pr

<div class="cArrow"> </div><div class="cContentInner">It happens to all of us in every day life, from time to time uneven ground, slippery surfaces, or a momentary distraction can send us tumbling. In most cases, we're lucky to walk away relatively unscathed, but slips, trips, and falls can also cause major injuries and complications. This is especially true in the workplace, where heavy equipment, moving vehicles, and other factors can be involved. Let's take a look at some effective methods you can improve your efforts to prevent these common injuries. Why You Should Care While slips and falls can be serious, we witness minor tumbles more often, desensitizing us to the potential for injury, death, and work loss days as a result. To counter this perception, however, the U.S. Department of Labor put out some startling statistics: According to reports filed, slips, trips, and falls are second only to motor vehicle incidents in accidental deaths every single year. Furthermore, one quarter of all injury claims filed in a year will come from slips and falls, and the estimated work days lost per year to related injuries number nearly 100 million in the U.S. alone - accounting for over 60% of all work days lost. Clearly, there are improvements to be made, and a large cumulative consequence when they are not. Decreasing Trip, Slip, and Fall Frequency caution-wet-floor-signMinimize slippery areas: Depending on the type of business you're in, the areas that become greasy or slippery in your workplace, and the root causes behind them, are going to be different. In a restaurant kitchen or food-related establishment, kitchen floors may become slippery with water or greasy from food scraps. In a production facility, a material spill might leave a floor dangerously slick. In a supply yard, sawdust, dust, or machine grease and grime might account for your most dangerous slipping hazards. While slippery areas are sometimes unavoidable, the length of time areas are slippery can be controlled and minimized. Make it employee pr</div>

...

Cancel

Arc Flash Analysis Software - Creative Safety - 0 views

blog.creativesafetysupply.com/arc-flash-analysis-software

arc flash safety blog creative safety

shared by pintadachica on 18 Jul 18 - No Cached

pintadachica on 18 Jul 18

It is the legal duty of any factory's management to make sure that it protects its employees from the dangers of arc flash. Most importantly, they need to comply with the OSHA industry standards which among other things, require that the management conducts a proper assessment of the arc flash hazards within and around the workplace. Have you heard about the arc flash analysis software? You need to consider it as you deal with the dangers of arc flash when working with high voltage equipment. Arc flash analysis is theoretically quite straightforward. It involves collection of data from the power distribution system. You also look at the dimensions of the electrical cables; the cross-section area and length. Once management has sourced this and other relevant information, they use the arc flash analysis software to conduct the short-circuit analysis of the system. The data realized is then used to get comparisons with the standards. With resultant data, the management is able to decide on the best PPE equipment for the employees. After using the arc flash analysis software, the resulting PPE requirement is in most cases too expensive. What can the management do to avoid paying the high costs? One way of doing this is upgrading the equipment to newer and more efficient versions. You may have noticed how easy it is for old circuit breakers to trip. This is simply because these breakers have low reaction times. The arc flash analysis software helps management to conduct sensitivity study, and the results of such a study might suggest an overhaul of the existing circuit breakers. You might be wondering whether arc flash analysis software is that important. In the industry setting, the primary concern for the manager should be the safety of employees. Arc faults are very dangerous and can cause burns, serious health complications and in some instances, death. It is important for the management to take arc flash analysis and warn of such hazards and so as to curb the

<div class="cArrow"> </div><div class="cContentInner">It is the legal duty of any factory's management to make sure that it protects its employees from the dangers of arc flash. Most importantly, they need to comply with the OSHA industry standards which among other things, require that the management conducts a proper assessment of the arc flash hazards within and around the workplace. Have you heard about the arc flash analysis software? You need to consider it as you deal with the dangers of arc flash when working with high voltage equipment. Arc flash analysis is theoretically quite straightforward. It involves collection of data from the power distribution system. You also look at the dimensions of the electrical cables; the cross-section area and length. Once management has sourced this and other relevant information, they use the arc flash analysis software to conduct the short-circuit analysis of the system. The data realized is then used to get comparisons with the standards. With resultant data, the management is able to decide on the best PPE equipment for the employees. After using the arc flash analysis software, the resulting PPE requirement is in most cases too expensive. What can the management do to avoid paying the high costs? One way of doing this is upgrading the equipment to newer and more efficient versions. You may have noticed how easy it is for old circuit breakers to trip. This is simply because these breakers have low reaction times. The arc flash analysis software helps management to conduct sensitivity study, and the results of such a study might suggest an overhaul of the existing circuit breakers. You might be wondering whether arc flash analysis software is that important. In the industry setting, the primary concern for the manager should be the safety of employees. Arc faults are very dangerous and can cause burns, serious health complications and in some instances, death. It is important for the management to take arc flash analysis and warn of such hazards and so as to curb the </div>

...

Cancel

Bumper Stickers & More: An Introduction to Thermal Printing - Safety Blog and News - In... - 0 views

www.safetyblognews.com/troduction-to-thermal-printing

bumper stickers thermal printing

shared by pintadachica on 28 Jul 18 - No Cached

pintadachica on 28 Jul 18

How to Create Bumper Stickers for Your Sticker campaigns For everything from political campaigns to social causes and beyond, cars adorned with bumper stickers are a regular sight across the country. Regular stickers, even more common, are a staple of our world from a young age, and an easily recognizable object for even children. Have you ever wondered how they're made? Sure, there are many companies that print stickers and the like in bulk for a third party, but there are also countless custom sticker campaigns floating about with highly customized messaging, some of which sprang up nearly instantaneously from their creative parties. These aren't cheap, flimsy creations either, some of them are the backbones of grass roots organizations that have changed the way we think and live our lives. Whatever your idea or needs, you're reading this because you want to create your own stickers, labels, or some other similar creative piece with professionalism and reliability. Let's take a look at exactly how you might get that done. Step One - Get Your Printer Especially if you're going to be producing large quantities of whatever you're making, it will be important that you have a reliable printer that isn't going to break down on you. For this reason, I'd suggest a thermal printer. Thermal printers have relatively few moving parts compared to traditional printers. Thermal Printers 101: The primary way in which thermal printers differ from traditional inkjet type models is that they use heat to transfer or even produce text and images. There are two subtypes: thermal transfer and direct thermal. Thermal transfer printers heat an inked ribbon which is then rolled over a paper or high-graded vinyl, transferring an image. Direct thermal printers work with thermal-chromatic paper, but do not require any ink. A heating element is pressed against the paper in the pattern of the text or imagery desired, and the paper responds by changing color in those places.

<div class="cArrow"> </div><div class="cContentInner">How to Create Bumper Stickers for Your Sticker campaigns For everything from political campaigns to social causes and beyond, cars adorned with bumper stickers are a regular sight across the country. Regular stickers, even more common, are a staple of our world from a young age, and an easily recognizable object for even children. Have you ever wondered how they're made? Sure, there are many companies that print stickers and the like in bulk for a third party, but there are also countless custom sticker campaigns floating about with highly customized messaging, some of which sprang up nearly instantaneously from their creative parties. These aren't cheap, flimsy creations either, some of them are the backbones of grass roots organizations that have changed the way we think and live our lives. Whatever your idea or needs, you're reading this because you want to create your own stickers, labels, or some other similar creative piece with professionalism and reliability. Let's take a look at exactly how you might get that done. Step One - Get Your Printer Especially if you're going to be producing large quantities of whatever you're making, it will be important that you have a reliable printer that isn't going to break down on you. For this reason, I'd suggest a thermal printer. Thermal printers have relatively few moving parts compared to traditional printers. Thermal Printers 101: The primary way in which thermal printers differ from traditional inkjet type models is that they use heat to transfer or even produce text and images. There are two subtypes: thermal transfer and direct thermal. Thermal transfer printers heat an inked ribbon which is then rolled over a paper or high-graded vinyl, transferring an image. Direct thermal printers work with thermal-chromatic paper, but do not require any ink. A heating element is pressed against the paper in the pattern of the text or imagery desired, and the paper responds by changing color in those places. </div>

...

Cancel

The Label Printer Buying Guide for Industrial and Commercial Purposes - Creative Safety - 0 views

blog.creativesafetysupply.com/label-printer-buying-guide

label printer blog creative safety

shared by pintadachica on 16 Sep 18 - No Cached

pintadachica on 16 Sep 18

If you are planning on purchasing an industrial-grade thermal label printer, you need to weigh several factors. Let's face it, these kind of machines are not cheap-they aren't like the flimsy ones that folks buy to make organizational labels for their home, or for scrapbooking-these are commercial level equipment, and they're designed to hold up to all the rigors of an industrial operation. Pipe Marking Labels So, with that in mind, here are the top 6 factors you should consider before you buy an industrial label maker: 1. Purpose: First off, what do you need to make heavy-duty labels for? Sure, these types of printers can make funny bumper stickers with a catchy slogan on it-but what do you REALLY need it for? Common uses for these are for making lots and lots of pipe markers, arc flash labels, and NFPA 704 "diamond" signs. They're also great for making safety slogans, caution and warning signs, 5S, lean, kaizen, and traffic marking stickers. Depending on how many you need, you might need to use it every day, or for sporadic printings throughout the year. These printers are great, because most of them can print on label tape up to 4 inches wide, and can spit labels out much quicker than those store-bought consumer ones. They can also take the heat and tougher environments of factories and warehouses. 2. Durability: Modern label makers are nearly flawless at their job. They use thermal transfer ribbons and heat seal the text or graphics from the ribbon to a compatible thermal label. This allows for a product that will last for many years before seeing much physical degradation or fading. They are water-resistant and even resist chemical wear. 3. Ease of Use: Many label makers come with their own proprietary software, but I would recommend buying a label maker that can be used with any kind of word processing software or even programs like Photoshop. This way, if you have a change in employees, move offices, or just plain lose the or

<div class="cArrow"> </div><div class="cContentInner">If you are planning on purchasing an industrial-grade thermal label printer, you need to weigh several factors. Let's face it, these kind of machines are not cheap-they aren't like the flimsy ones that folks buy to make organizational labels for their home, or for scrapbooking-these are commercial level equipment, and they're designed to hold up to all the rigors of an industrial operation. Pipe Marking Labels So, with that in mind, here are the top 6 factors you should consider before you buy an industrial label maker: 1. Purpose: First off, what do you need to make heavy-duty labels for? Sure, these types of printers can make funny bumper stickers with a catchy slogan on it-but what do you REALLY need it for? Common uses for these are for making lots and lots of pipe markers, arc flash labels, and NFPA 704 "diamond" signs. They're also great for making safety slogans, caution and warning signs, 5S, lean, kaizen, and traffic marking stickers. Depending on how many you need, you might need to use it every day, or for sporadic printings throughout the year. These printers are great, because most of them can print on label tape up to 4 inches wide, and can spit labels out much quicker than those store-bought consumer ones. They can also take the heat and tougher environments of factories and warehouses. 2. Durability: Modern label makers are nearly flawless at their job. They use thermal transfer ribbons and heat seal the text or graphics from the ribbon to a compatible thermal label. This allows for a product that will last for many years before seeing much physical degradation or fading. They are water-resistant and even resist chemical wear. 3. Ease of Use: Many label makers come with their own proprietary software, but I would recommend buying a label maker that can be used with any kind of word processing software or even programs like Photoshop. This way, if you have a change in employees, move offices, or just plain lose the or</div>

...

Cancel

The Long & Short Of An AI Strategy - The AI Company - 0 views

www.autolearn.ai/...ort-term-vs-long-term-strategy

auto learn disital strategy term AI company artificial intelligence

shared by pintadachica on 11 Nov 18 - No Cached

pintadachica on 11 Nov 18

Much has and needs to be said about an enterprise's AI strategy. Artificial Intelligence or AI is considered a fundamentally disruptive technology similar to the steam engine, electricity etc, a technology that will be pervasive and absolute in its impact on the world and its inhabitants. The ability to find hidden patterns to predict the future or detect a behavior has massive implications across the world, in every industry, sector, and domain. When faced with this realization, enterprise's can find themselves stuck, paralyzed and unsure about how to proceed. The field of AI is decades old already and the early success stories have been practicing AI for multiple years already with the tech industry leading the way. How can an enterprise that has no experience and competency in this area let alone lead the technology or even leverage it appropriately to drive business value? When developing the AI strategy, two ideas are paramount. First, this a fundamentally disruptive technology and the enterprise will need to establish it as a core competency for the foreseeable future. Not doing so will not be an option. Second, a long-term plan to success is superseded by the need to drive quick wins and small successes not only to build confidence but use real-world experience to develop and hone that skill. The Short-Term AI Strategy The short-term AI strategy should focus on driving immediate business value through enhanced customer experiences that leverage any field of AI be it machine learning, deep learning, natural language processing etc. Driving the usage and deployment of AI in front of an end user making them smarter, productive and better informed can pay rich dividends by not only helping the enterprise can real-world experience, but it can also give a perception boost to the company as being innovative and cutting edge. However, most importantly, this can highlight and promote the success and potential of AI in the enterprise and encourage a snowball eff

<div class="cArrow"> </div><div class="cContentInner">Much has and needs to be said about an enterprise's AI strategy. Artificial Intelligence or AI is considered a fundamentally disruptive technology similar to the steam engine, electricity etc, a technology that will be pervasive and absolute in its impact on the world and its inhabitants. The ability to find hidden patterns to predict the future or detect a behavior has massive implications across the world, in every industry, sector, and domain. When faced with this realization, enterprise's can find themselves stuck, paralyzed and unsure about how to proceed. The field of AI is decades old already and the early success stories have been practicing AI for multiple years already with the tech industry leading the way. How can an enterprise that has no experience and competency in this area let alone lead the technology or even leverage it appropriately to drive business value? When developing the AI strategy, two ideas are paramount. First, this a fundamentally disruptive technology and the enterprise will need to establish it as a core competency for the foreseeable future. Not doing so will not be an option. Second, a long-term plan to success is superseded by the need to drive quick wins and small successes not only to build confidence but use real-world experience to develop and hone that skill. The Short-Term AI Strategy The short-term AI strategy should focus on driving immediate business value through enhanced customer experiences that leverage any field of AI be it machine learning, deep learning, natural language processing etc. Driving the usage and deployment of AI in front of an end user making them smarter, productive and better informed can pay rich dividends by not only helping the enterprise can real-world experience, but it can also give a perception boost to the company as being innovative and cutting edge. However, most importantly, this can highlight and promote the success and potential of AI in the enterprise and encourage a snowball eff</div>

...

Cancel

What No One Tells You About Pipe Marking - Creative Safety - 0 views

blog.creativesafetysupply.com/no-one-tells-pipe-marking

pipe marking creative safety

shared by pintadachica on 26 May 18 - No Cached

pintadachica on 26 May 18

Ok, let's be honest here. Unless you are a safety professional, or you work closely with safety professionals, the chances are that no one has really told you anything about pipe marking, right? But for those of us lucky enough to work in this industry, it quickly becomes all too clear that there is an endless amount of information available about this very narrow topic. Unfortunately, about 99% of the information that people learn about pipe marking is just reiterating the standards and regulations that are put out by OSHA and other regulatory bodies. Now, make no mistake, this information is absolutely critical to learn and follow. The fact is, however, that there are A LOT of other things that someone who works with pipe marking should know. We've put together some helpful tips, tricks, information, and advice that covers a wide range of pipe marking related topics to help ensure your pipe marking strategies are as effective as possible. If you have any other 'secrets' of pipe marking that you don't see here, please contact us below so we can help pass them along in the future. Choose Your Materials Wisely Everyone knows that you can't just use the normal label materials that are basically paper with a little glue on the back, which you might buy at Office Depot. There are, however, lots of different types of industrial labeling materials out there, and picking the right one for the right area is essential. Here are several essential points to be aware of: Pipe Materials - Did you know that normal vinyl labels can cause corrosion on pipes made of nickel and stainless steel? If you have this type of piping, make sure you opt for labels that are identified as 'low halide' to avoid this potentially disastrous risk. Know the Weather Risks - When labeling outdoor piping, you need to keep weathering in mind. Most label materials are water-proof, but the constant change in temperature, humidity, wind, and more can really be rough on pipe markings

<div class="cArrow"> </div><div class="cContentInner">Ok, let's be honest here. Unless you are a safety professional, or you work closely with safety professionals, the chances are that no one has really told you anything about pipe marking, right? But for those of us lucky enough to work in this industry, it quickly becomes all too clear that there is an endless amount of information available about this very narrow topic. Unfortunately, about 99% of the information that people learn about pipe marking is just reiterating the standards and regulations that are put out by OSHA and other regulatory bodies. Now, make no mistake, this information is absolutely critical to learn and follow. The fact is, however, that there are A LOT of other things that someone who works with pipe marking should know. We've put together some helpful tips, tricks, information, and advice that covers a wide range of pipe marking related topics to help ensure your pipe marking strategies are as effective as possible. If you have any other 'secrets' of pipe marking that you don't see here, please contact us below so we can help pass them along in the future. Choose Your Materials Wisely Everyone knows that you can't just use the normal label materials that are basically paper with a little glue on the back, which you might buy at Office Depot. There are, however, lots of different types of industrial labeling materials out there, and picking the right one for the right area is essential. Here are several essential points to be aware of: Pipe Materials - Did you know that normal vinyl labels can cause corrosion on pipes made of nickel and stainless steel? If you have this type of piping, make sure you opt for labels that are identified as 'low halide' to avoid this potentially disastrous risk. Know the Weather Risks - When labeling outdoor piping, you need to keep weathering in mind. Most label materials are water-proof, but the constant change in temperature, humidity, wind, and more can really be rough on pipe markings</div>

...

Cancel

Safety Stickers - Creative Safety - 0 views

blog.creativesafetysupply.com/safety-stickers

safety stickers creative

shared by pintadachica on 02 Jun 18 - No Cached

pintadachica on 02 Jun 18

The pertinent use of safety stickers and labels is a must within any industrial work environment. Safety stickers and labels serve many functions, first and foremost, they help to warn or inform employees and visitors of any specific safety concerns. Additionally, they also serve as handy informational reminders from identifying the contents within certain pipes, to showing where recycling may be located, all the way to highlighting the location of a safety eye wash station. Since the need for safety stickers is so important, yet so diverse depending upon the type of business, it may be difficult to locate all the specific stickers and labels needed. One way to easily combat the rising costs of utilizing outside retailers for safety stickers is to simply make your own. Believe it or not, printing your own safety stickers is generally faster, easier, and more cost efficient. Printing Safety Stickers If you've never considered the option of printing your own safety stickers, right now is the time to start. With advances in technology, some label printers are able to efficiently print bright and colorful, commercial grade stickers and labels. One label printing product currently on the market that rivals most others in price, quality, and ease of use is the LabelTac 4 PRO. This printer has proven time and time again to produce high-quality, dependable, colorfast labels that outperform most other safety stickers available on the market, and the best part is they can be printed in-house right from your own office. The LabelTac 4 PRO is capable of creating indoor and outdoor labels that are both weather and fade resistant. Furthermore, the ease of use with the LabelTac 4 PRO is simply impressive to say the least. It is compatible with nearly any Windows-based programs including well-known products such as Microsoft Office, OpenOffice, and Excel. However, even if you don't utilize Windows-based software the LabelTac 4 PRO comes equipped with its own easy-to-use Barte

<div class="cArrow"> </div><div class="cContentInner">The pertinent use of safety stickers and labels is a must within any industrial work environment. Safety stickers and labels serve many functions, first and foremost, they help to warn or inform employees and visitors of any specific safety concerns. Additionally, they also serve as handy informational reminders from identifying the contents within certain pipes, to showing where recycling may be located, all the way to highlighting the location of a safety eye wash station. Since the need for safety stickers is so important, yet so diverse depending upon the type of business, it may be difficult to locate all the specific stickers and labels needed. One way to easily combat the rising costs of utilizing outside retailers for safety stickers is to simply make your own. Believe it or not, printing your own safety stickers is generally faster, easier, and more cost efficient. Printing Safety Stickers If you've never considered the option of printing your own safety stickers, right now is the time to start. With advances in technology, some label printers are able to efficiently print bright and colorful, commercial grade stickers and labels. One label printing product currently on the market that rivals most others in price, quality, and ease of use is the LabelTac 4 PRO. This printer has proven time and time again to produce high-quality, dependable, colorfast labels that outperform most other safety stickers available on the market, and the best part is they can be printed in-house right from your own office. The LabelTac 4 PRO is capable of creating indoor and outdoor labels that are both weather and fade resistant. Furthermore, the ease of use with the LabelTac 4 PRO is simply impressive to say the least. It is compatible with nearly any Windows-based programs including well-known products such as Microsoft Office, OpenOffice, and Excel. However, even if you don't utilize Windows-based software the LabelTac 4 PRO comes equipped with its own easy-to-use Barte</div>

...

Cancel

Improvement: Make a Win-Win Situation for Both the Business and it's Employees - Creati... - 0 views

blog.creativesafetysupply.com/the-business-and-its-employees

business and its employee safety blog

shared by pintadachica on 20 Jun 18 - No Cached

pintadachica on 20 Jun 18

In the business world, there is a constant need and desire for improvement. It doesn't matter whether a business specializes in the market of rare auto parts or in making the best enchiladas. The plain and simple truth is that improving business practices to meet the ever-changing and diverse needs of society is essential to the success of any business endeavor. However, with all this change and improvement often comes a little struggle. Sometimes business processes are changed so radically that employees struggle with the changes if they are not adequately informed about what changes are taking place or how the changes actually benefit the specific process or end product. Furthermore, in some cases the problem is not with the employees at all, but instead embedded within the actual process changes. When looking into making improvement changes, it is important to really take the time to evaluate the changes fully to make sure that they are win-win for both the employees and the desired business objectives. Employee Involvement In the improvement process, there are often many things to consider especially such as metrics, data, resources, etc. However, it is important to make sure that employees are also considered within the grand scheme of things. There are times when businesses make essential changes that are needed to stay current with the changing times, but often neglect to involve the actual employees in the process of determining changes, or in the reasoning why specific changes were made. This can leave employees feeling a bit resentful and also leave processes lacking in certain important fundamentals. For instance, the top managers in a business make the decision to improve a production line within the factory because many of the machines were getting older and not handling the work as effectively as needed. In order to update the production line to new standards, new machines were installed and tweaks were made to previous processes in order to help

<div class="cArrow"> </div><div class="cContentInner">In the business world, there is a constant need and desire for improvement. It doesn't matter whether a business specializes in the market of rare auto parts or in making the best enchiladas. The plain and simple truth is that improving business practices to meet the ever-changing and diverse needs of society is essential to the success of any business endeavor. However, with all this change and improvement often comes a little struggle. Sometimes business processes are changed so radically that employees struggle with the changes if they are not adequately informed about what changes are taking place or how the changes actually benefit the specific process or end product. Furthermore, in some cases the problem is not with the employees at all, but instead embedded within the actual process changes. When looking into making improvement changes, it is important to really take the time to evaluate the changes fully to make sure that they are win-win for both the employees and the desired business objectives. Employee Involvement In the improvement process, there are often many things to consider especially such as metrics, data, resources, etc. However, it is important to make sure that employees are also considered within the grand scheme of things. There are times when businesses make essential changes that are needed to stay current with the changing times, but often neglect to involve the actual employees in the process of determining changes, or in the reasoning why specific changes were made. This can leave employees feeling a bit resentful and also leave processes lacking in certain important fundamentals. For instance, the top managers in a business make the decision to improve a production line within the factory because many of the machines were getting older and not handling the work as effectively as needed. In order to update the production line to new standards, new machines were installed and tweaks were made to previous processes in order to help </div>

...

Cancel

Are Youngevity Products Too Expensive? - Youngevity Australia Distributor - 0 views

young1.life/ngevity-products-too-expensive

youngevity products starter pack australia distributor tangy tangerine healthy start beyond buy order body

shared by pintadachica on 08 Feb 21 - No Cached

Are Youngevity Products Too Expensive?
...

Cancel
So, if you want to ensure that your financial investment in nutritional supplements is actually able to be utilized by your body, and contains only pristine life supporting nutrients, Dr Wallach’s 90 for Life pack delivers exceptional value.
...

Cancel

pintadachica on 08 Feb 21

We hear this comment occasionally from customers, but the important thing to consider is what are they comparing our products with to make this comparison? Let's have a look…. What are you actually getting when you purchase Youngevity's core 90 for Life Healthy Start pack?90 for Life pack Vitamins that are "grown" from certified organic fruits and vegetables, rather than vitamins produced synthetically in a laboratory. Youngevity grows specific crops in mineralized soils to reap the particular vitamins they include in the Tangy Tangerine and OsteoFX products. Unlike synthetic vitamins, the body rapidly absorbs and uptakes these plant-derived and natural vitamins. They come as nature intended us to have them, complete with enzymes, natural fiber (prebiotics), and probiotics. As such the body can easily utilize them. Plant Derived Minerals, rather than rock-based minerals. Humans were not intended to eat rocks whether crushed or whole! The only way we can readily absorb minerals is after plants have uptaken the rock minerals from the soil and through photosynthesis converted those minerals into many times smaller particles that easily pass through the human cellular structure. These Plant Derived Minerals used in Tangy Tangerine and OsteoFX are typically around 98% absorbable whereas rock-based minerals are at best about 8% absorbable. If you're considering product cost you would have to factor in the cost of 92 cents of every dollar you spend on supplements with rock-based minerals are being flushed down your toilet bowl. Careful production methods are used to ensure maximum nutrient value is retained, and preservatives are not required. Youngevity uses a slow spinning, low heat process to convert the fresh fruit and vegetables in the Tangy Tangerine 2.0 powder and OsteoFX powder formulations which, over many hours, produces the microcrystalline powders in these 2 products. The low heat means vital plant elements such as prebiotics and probiotics are

<div class="cArrow"> </div><div class="cContentInner">We hear this comment occasionally from customers, but the important thing to consider is what are they comparing our products with to make this comparison? Let's have a look…. What are you actually getting when you purchase Youngevity's core 90 for Life Healthy Start pack?90 for Life pack Vitamins that are "grown" from certified organic fruits and vegetables, rather than vitamins produced synthetically in a laboratory. Youngevity grows specific crops in mineralized soils to reap the particular vitamins they include in the Tangy Tangerine and OsteoFX products. Unlike synthetic vitamins, the body rapidly absorbs and uptakes these plant-derived and natural vitamins. They come as nature intended us to have them, complete with enzymes, natural fiber (prebiotics), and probiotics. As such the body can easily utilize them. Plant Derived Minerals, rather than rock-based minerals. Humans were not intended to eat rocks whether crushed or whole! The only way we can readily absorb minerals is after plants have uptaken the rock minerals from the soil and through photosynthesis converted those minerals into many times smaller particles that easily pass through the human cellular structure. These Plant Derived Minerals used in Tangy Tangerine and OsteoFX are typically around 98% absorbable whereas rock-based minerals are at best about 8% absorbable. If you're considering product cost you would have to factor in the cost of 92 cents of every dollar you spend on supplements with rock-based minerals are being flushed down your toilet bowl. Careful production methods are used to ensure maximum nutrient value is retained, and preservatives are not required. Youngevity uses a slow spinning, low heat process to convert the fresh fruit and vegetables in the Tangy Tangerine 2.0 powder and OsteoFX powder formulations which, over many hours, produces the microcrystalline powders in these 2 products. The low heat means vital plant elements such as prebiotics and probiotics are </div>

...

Cancel

The 5 Best Streaming Sites to Listen to Classical Music - 0 views

www.classicalite.com/...-listen-to-classical-music.htm

Music spotify Apple idagio pandora streaming

shared by rasel136 on 22 Dec 20 - No Cached

rasel136 on 22 Dec 20

Introduction It's the end of the day. You get home from work, sit down on your couch, and begin to relax. In this process, you may turn to music as a way to help you relax and forget the stresses of daily life. The best kind of music for this? Classical instrumental music, of course! But there's one small problem: how do you find classical music? After all, classical music isn't as popular as pop, hip hop, and rock, making it semi-difficult to find classical music, especially if your taste involves more obscure pieces. The journey to find such pieces can be difficult, which is why I want to help you by telling you the best sites and streaming services to find-and listen to-classical music. So, without further ado, let's jump right into it! The 5 Best Sites for Classical Music YouTube What kind of list would this be if I neglected to mention one of, if not the most popular website in the world, YouTube. Ever since it's inception in 2005, the site's displayed steady growth, allowing billions of people to find enjoyment and joy on the Internet. And with YouTube being one of the biggest sites in the world, it only makes sense to have a section of the website dedicated to music. This section, aptly named YouTube Music, contains any kind of music for any kind of listener. This includes classic instrumental music. Trust me when I say, there is plenty of classical music for you to listen to, from the most popular composers to the more obscure composers. Spotify Next up, we have Spotify, a titan of the streaming industry. While Spotify doesn't allow the streaming of videos, no service besides Apple Music can compete with its catalog of music, including classical instrumental music. Spotify is especially great for people who like all kinds of genres, and its cheap subscription price gives little reason to not at least consider using the service. As a matter of fact, I think there's a free monthly trial. Wouldn't hurt to give it a spin! Only thing that may give you trou

<div class="cArrow"> </div><div class="cContentInner">Introduction It's the end of the day. You get home from work, sit down on your couch, and begin to relax. In this process, you may turn to music as a way to help you relax and forget the stresses of daily life. The best kind of music for this? Classical instrumental music, of course! But there's one small problem: how do you find classical music? After all, classical music isn't as popular as pop, hip hop, and rock, making it semi-difficult to find classical music, especially if your taste involves more obscure pieces. The journey to find such pieces can be difficult, which is why I want to help you by telling you the best sites and streaming services to find-and listen to-classical music. So, without further ado, let's jump right into it! The 5 Best Sites for Classical Music YouTube What kind of list would this be if I neglected to mention one of, if not the most popular website in the world, YouTube. Ever since it's inception in 2005, the site's displayed steady growth, allowing billions of people to find enjoyment and joy on the Internet. And with YouTube being one of the biggest sites in the world, it only makes sense to have a section of the website dedicated to music. This section, aptly named YouTube Music, contains any kind of music for any kind of listener. This includes classic instrumental music. Trust me when I say, there is plenty of classical music for you to listen to, from the most popular composers to the more obscure composers. Spotify Next up, we have Spotify, a titan of the streaming industry. While Spotify doesn't allow the streaming of videos, no service besides Apple Music can compete with its catalog of music, including classical instrumental music. Spotify is especially great for people who like all kinds of genres, and its cheap subscription price gives little reason to not at least consider using the service. As a matter of fact, I think there's a free monthly trial. Wouldn't hurt to give it a spin! Only thing that may give you trou</div>

...

Cancel

Pandemic & Natural Flu Prevention with Simple Daily Habits - Youngevity Australia Distr... - 0 views

pintadachica on 08 Feb 21

Pandemic & Natural Flu Prevention with Simple Daily Habits The current Coronavirus Pandemic sweeping the world is causing all of us to look at our daily habits. Most of the focus has been on hand sanitation, covering your mouth if you cough or sneeze, and keeping your distance from people who may be at risk of spreading the virus. However, a more prudent action to take would be to look at the daily habits you have in place which could protect you long term from being in the high risk group of most likely to suffer severe consequences from contracting a virus such as COVID-19. Rather than resort to waiting for an immunization to emerge, you could start now to adopt daily habits that support natural pandemic and flu prevention. This high risk group comprises people over the age of 60 who are immune compromised and/or have an underlying health condition that makes them more susceptible to disease and death from that disease. Unfortunately, the health of our population as a whole has been declining for many years now. Have a look at some of the statistics: From 1990 to 2013 there was a 141% increase in deaths from Heart Disease. From 1996 to 2009 there was a 145% increase n people suffering from Asthma From 1999 to 2015 there was a 150% increase in Inflammatory Bowel Disease From 1990 to 2015 there was a 250% increase in Epilepsy From 1999 to 2010 there was a 300% increase in Diabetes From 1996 to 2018 300% more births required fertility treatments. From 1991 to 2015 there were 783% more deaths from Alzheimer's Disease From 1990 to 2018 there was a 4,200% increase in Autism Common diseases are now increasing at epidemic rates, but none of this is hitting the headlines of our mainstream media! What could be causing this massive decline in our population's health, and therefore making us more vulnerable to pandemics like COVID-19 and seasonal flu viruses? Nutrient Deficiency Diseasesmineral-defiency-deseases-and nutrient deficiencyDr Wallach has been saying for man

<div class="cArrow"> </div><div class="cContentInner">Pandemic & Natural Flu Prevention with Simple Daily Habits The current Coronavirus Pandemic sweeping the world is causing all of us to look at our daily habits. Most of the focus has been on hand sanitation, covering your mouth if you cough or sneeze, and keeping your distance from people who may be at risk of spreading the virus. However, a more prudent action to take would be to look at the daily habits you have in place which could protect you long term from being in the high risk group of most likely to suffer severe consequences from contracting a virus such as COVID-19. Rather than resort to waiting for an immunization to emerge, you could start now to adopt daily habits that support natural pandemic and flu prevention. This high risk group comprises people over the age of 60 who are immune compromised and/or have an underlying health condition that makes them more susceptible to disease and death from that disease. Unfortunately, the health of our population as a whole has been declining for many years now. Have a look at some of the statistics: From 1990 to 2013 there was a 141% increase in deaths from Heart Disease. From 1996 to 2009 there was a 145% increase n people suffering from Asthma From 1999 to 2015 there was a 150% increase in Inflammatory Bowel Disease From 1990 to 2015 there was a 250% increase in Epilepsy From 1999 to 2010 there was a 300% increase in Diabetes From 1996 to 2018 300% more births required fertility treatments. From 1991 to 2015 there were 783% more deaths from Alzheimer's Disease From 1990 to 2018 there was a 4,200% increase in Autism Common diseases are now increasing at epidemic rates, but none of this is hitting the headlines of our mainstream media! What could be causing this massive decline in our population's health, and therefore making us more vulnerable to pandemics like COVID-19 and seasonal flu viruses? Nutrient Deficiency Diseasesmineral-defiency-deseases-and nutrient deficiencyDr Wallach has been saying for man</div>

...

Cancel

Skateboarding, The AI Company and the Autolearn Boost - The AI Company - 0 views

www.autolearn.ai/...en-skateboarding-autolearns-ai

artificial intelligence innovation technology digital strategy AI company

shared by pintadachica on 09 Jan 19 - No Cached

What is common between skateboarding and learning to skateboarding & autolearn.ai’s AI platform. Lots, turns out. Consider the process of learning to skateboard. One repeatedly tries a move with the skateboard. You look at if you can land the move. If you do, you try a different move. if you don’t, you slightly vary something in your technique; maybe you try a different center of gravity or angle your legs slightly differently or move your arms differently. Rinse. Repeat. As the skateboarder tries different variations, the “learn” the intricacies of every move and slowly improve. The more time, the more variations and the more analysis they do, the faster they learn and get better. Over time, one can go from a novice to an expert, having built a massive repository of insights and training that help the brain leverage the learning to control the brain that in turn controls the muscles, bones and body weight to effortlessly skateboard. The AI Company’s platform is designed to mimic the process of learning to skateboard. However, instead of sequentially repeating the learning task, the AI platform enables automatically parallelizes the learning process by simultaneously trying out each possible variation for each move and then parallelizing learning multiple moves at the same time. This massive parallelization is accentuated by the automatic selection of the most optimal and accurate insights (AI models) that learn the best in the context of the problem at hand. The best AI models are automatically deployed to production, stored in a very secure form and can be leveraged in traditional app development or in the development of intelligent smart contracts (AutoLearn’s SmartChain). Imagine learning a skill instantly by parallelizing your learning so that you can try out the millions of variations, learn from them and ingest the learnings instantly. This is the AutoLearn boost.  With The AI Company’s AI, you are able to reduce what traditionally in data science would take upwards of a year and multiple data scientists to mere days through the automated training, selection and deployment of the best AI models out of 1000s of variations generated in parallel by AutoLearn. Not only do you reduce the time taken to go live with AI, because of the automation and the efficiency maximizer in AutoLearn’s AutoAI, you are guaranteed the best possible AI model. This is not guaranteed in a manually driven data science practice!
...

Cancel

pintadachica on 09 Jan 19

What is common between skateboarding and learning to skateboarding & autolearn.ai's AI platform. Lots, turns out. Consider the process of learning to skateboard. One repeatedly tries a move with the skateboard. You look at if you can land the move. If you do, you try a different move. if you don't, you slightly vary something in your technique; maybe you try a different center of gravity or angle your legs slightly differently or move your arms differently. Rinse. Repeat. As the skateboarder tries different variations, the "learn" the intricacies of every move and slowly improve. The more time, the more variations and the more analysis they do, the faster they learn and get better. Over time, one can go from a novice to an expert, having built a massive repository of insights and training that help the brain leverage the learning to control the brain that in turn controls the muscles, bones and body weight to effortlessly skateboard. The AI Company's platform is designed to mimic the process of learning to skateboard. However, instead of sequentially repeating the learning task, the AI platform enables automatically parallelizes the learning process by simultaneously trying out each possible variation for each move and then parallelizing learning multiple moves at the same time. This massive parallelization is accentuated by the automatic selection of the most optimal and accurate insights (AI models) that learn the best in the context of the problem at hand. The best AI models are automatically deployed to production, stored in a very secure form and can be leveraged in traditional app development or in the development of intelligent smart contracts (AutoLearn's SmartChain). Imagine learning a skill instantly by parallelizing your learning so that you can try out the millions of variations, learn from them and ingest the learnings instantly. This is the AutoLearn boost. With The AI Company's AI, you are able to reduce what traditionally in data

<div class="cArrow"> </div><div class="cContentInner">What is common between skateboarding and learning to skateboarding & autolearn.ai's AI platform. Lots, turns out. Consider the process of learning to skateboard. One repeatedly tries a move with the skateboard. You look at if you can land the move. If you do, you try a different move. if you don't, you slightly vary something in your technique; maybe you try a different center of gravity or angle your legs slightly differently or move your arms differently. Rinse. Repeat. As the skateboarder tries different variations, the "learn" the intricacies of every move and slowly improve. The more time, the more variations and the more analysis they do, the faster they learn and get better. Over time, one can go from a novice to an expert, having built a massive repository of insights and training that help the brain leverage the learning to control the brain that in turn controls the muscles, bones and body weight to effortlessly skateboard. The AI Company's platform is designed to mimic the process of learning to skateboard. However, instead of sequentially repeating the learning task, the AI platform enables automatically parallelizes the learning process by simultaneously trying out each possible variation for each move and then parallelizing learning multiple moves at the same time. This massive parallelization is accentuated by the automatic selection of the most optimal and accurate insights (AI models) that learn the best in the context of the problem at hand. The best AI models are automatically deployed to production, stored in a very secure form and can be leveraged in traditional app development or in the development of intelligent smart contracts (AutoLearn's SmartChain). Imagine learning a skill instantly by parallelizing your learning so that you can try out the millions of variations, learn from them and ingest the learnings instantly. This is the AutoLearn boost. With The AI Company's AI, you are able to reduce what traditionally in data</div>

...

Cancel

Game Development Outsourcing: Factors to Consider Before Approaching - 1 views

lwmobilegames.wordpress.com/...to-consider-before-approaching

blog Ecommerce Web Designer Search Engine Optimization Company game design development

shared by Lancerwonders Games on 18 Mar 16 - No Cached

Lancerwonders Games on 18 Mar 16

Creative ideas come to anyone. And sometimes we all come up with amazing game ideas, but couldn't made out of it as we don't have the right development skills and infrastructure. More people are coming with creative game ideas for smartphones but either lack the skills or don't have enough time to build the game....

<div class="cArrow"> </div><div class="cContentInner">Creative ideas come to anyone. And sometimes we all come up with amazing game ideas, but couldn't made out of it as we don't have the right development skills and infrastructure. More people are coming with creative game ideas for smartphones but either lack the skills or don't have enough time to build the game....</div>

...

Cancel

Innovation is not Technology and Technology is not Innovation - The AI Company - 0 views

www.autolearn.ai/...2017-7-4-innovation-technology

technology innovation AI autolearn digital strategy company Business

shared by pintadachica on 20 Dec 18 - No Cached

pintadachica on 20 Dec 18

One of the most common misconceptions out there is the belief that technology equates innovation. Innovation is the creation of new value through a better solution for a problem that either does a better job in solving the problem or does so in a manner that the solution is accessible in a larger set of circumstances by a larger number of people. On the other hand, technology is simply the tooling that holds the promise of new solutions but by itself, is meaningless. Enterprises can become enamored by the promise and hype about technology and go down long, complex journeys, invest millions in upgrading technology and still come out empty on the other side because they built technology for technology's sake. Even in well intention boards and C-suite, industry peer pressure and hype around technologies can force action that ultimately leads to massive investments in people, software, technology, and vendors but does not yield the ROI promised by the technology. Leadership The problem can be accentuated when not enough due diligence is done on the applicability of the technology to the enterprise given the current state i.e. the point in time when the technology is being introduced, the customer's propensity to accept the technology-driven solution i.e. are the users ready to embrace, adopt, learn and utilize new solutions and burning problems that necessitate the adoption of new technology to better solve the problem. When the timing of new technology introduction is gotten wrong, it almost always fails to deliver on its promised ROI. Leaders need to rise above the hype and peer pressure and ensure that they understand, first and foremost, the burning problems that plague their customers or make the bedrock of their future strategy. Next, leaders need to ensure and validate that the technology in mind can actually be used to solve the problem through rapid prototyping and minimal investment. Once customer feedback on the prototype has been validated, then only

<div class="cArrow"> </div><div class="cContentInner">One of the most common misconceptions out there is the belief that technology equates innovation. Innovation is the creation of new value through a better solution for a problem that either does a better job in solving the problem or does so in a manner that the solution is accessible in a larger set of circumstances by a larger number of people. On the other hand, technology is simply the tooling that holds the promise of new solutions but by itself, is meaningless. Enterprises can become enamored by the promise and hype about technology and go down long, complex journeys, invest millions in upgrading technology and still come out empty on the other side because they built technology for technology's sake. Even in well intention boards and C-suite, industry peer pressure and hype around technologies can force action that ultimately leads to massive investments in people, software, technology, and vendors but does not yield the ROI promised by the technology. Leadership The problem can be accentuated when not enough due diligence is done on the applicability of the technology to the enterprise given the current state i.e. the point in time when the technology is being introduced, the customer's propensity to accept the technology-driven solution i.e. are the users ready to embrace, adopt, learn and utilize new solutions and burning problems that necessitate the adoption of new technology to better solve the problem. When the timing of new technology introduction is gotten wrong, it almost always fails to deliver on its promised ROI. Leaders need to rise above the hype and peer pressure and ensure that they understand, first and foremost, the burning problems that plague their customers or make the bedrock of their future strategy. Next, leaders need to ensure and validate that the technology in mind can actually be used to solve the problem through rapid prototyping and minimal investment. Once customer feedback on the prototype has been validated, then only</div>

...

Cancel

Kaizen Continuous Improvement - Ten Tips - Creative Safety - 0 views

blog.creativesafetysupply.com/ontinuous-improvement-ten-tips

kaizen tips safety creative safety

shared by pintadachica on 26 Aug 18 - No Cached

pintadachica on 26 Aug 18

Ten Tips to Help You with Your Kaizen Continuous Improvement Strategy The Kaizen methodology encourages ongoing efforts to ensure continuous improvement throughout a facility. This improvement can come in many forms including waste elimination, improved efficiency, safer work environments and much more. To simply say that a facility is employing Kaizen strategies, is essentially meaningless if you don't have any concrete action items you are following. Whether you're just getting started or you are looking for ways to reinvigorate a Kaizen strategy that is not effective, the following ten tips will be very helpful. Each one can give you ideas on what you can do encourage improvement and allow that improvement to grow and expand long into the future. Tip #1 - Harness the PDCA Strategy One of the key concepts used in Kaizen is the "Plan-Do-Check-Act" strategy. This is a quality model that can be used when implementing any type of improvement in the facility. As you might expect, the PDCA strategy is a cycle of ongoing improvement that should never end. The steps are as follows: Plan - This step is where you identify an area where improvement is possible and make an initial strategy on what chance should be made to realize the desired improvements. Do - Implement the change, but only on a small scale. This may mean having one department make the change in some situations or for larger corporations, having one facility make the update. During this step it is also very important to be gathering as much data regarding the change so it can be properly evaluated. Check - Review the results of the change including the data that was collected. Looking to see if they had the desired impact or not is critical to know whether you should move forward with rolling the change out to other areas. Act - IF the data in the check step points to a success, it is time to push the change out on a wider scale. Once the change has been successfully implemented you wi

<div class="cArrow"> </div><div class="cContentInner">Ten Tips to Help You with Your Kaizen Continuous Improvement Strategy The Kaizen methodology encourages ongoing efforts to ensure continuous improvement throughout a facility. This improvement can come in many forms including waste elimination, improved efficiency, safer work environments and much more. To simply say that a facility is employing Kaizen strategies, is essentially meaningless if you don't have any concrete action items you are following. Whether you're just getting started or you are looking for ways to reinvigorate a Kaizen strategy that is not effective, the following ten tips will be very helpful. Each one can give you ideas on what you can do encourage improvement and allow that improvement to grow and expand long into the future. Tip #1 - Harness the PDCA Strategy One of the key concepts used in Kaizen is the "Plan-Do-Check-Act" strategy. This is a quality model that can be used when implementing any type of improvement in the facility. As you might expect, the PDCA strategy is a cycle of ongoing improvement that should never end. The steps are as follows: Plan - This step is where you identify an area where improvement is possible and make an initial strategy on what chance should be made to realize the desired improvements. Do - Implement the change, but only on a small scale. This may mean having one department make the change in some situations or for larger corporations, having one facility make the update. During this step it is also very important to be gathering as much data regarding the change so it can be properly evaluated. Check - Review the results of the change including the data that was collected. Looking to see if they had the desired impact or not is critical to know whether you should move forward with rolling the change out to other areas. Act - IF the data in the check step points to a success, it is time to push the change out on a wider scale. Once the change has been successfully implemented you wi</div>

...

Cancel

Group items tagged