Skip to main content

Home/ Blog & Blogging..!!/ Group items tagged 5

Rss Feed Group items tagged

pintadachica

Pipe Marking - Top 10 Best Practices - 0 views

  •  
    The piping in many facilities can get quite elaborate, with different pipes going in virtually every direction. The fact that each pipe is used to transport different solutions, makes it is absolutely essential that you follow pipe marking best practices in order to keep everyone safe. It is not enough to simply have the pipe labeled right at the spout or faucet, though that is certainly a good start. You also need to make sure the rest of the pipe is clearly labeled so that people who are performing maintenance or other work on them will not have any issues knowing exactly what is contained within the pipes. With that in mind, take some time to review the following 10 best practices for pipe marking, and double check to make sure your facility is up to speed. 10 Best Practices for Pipe Marking Best Practice #1 - High Quality Labels Labeling pipes is not an easy task. In most cases, these pipes are located quite high in the facility, so working on them comes with its own set of hazards. In addition, it can be time consuming and disruptive since you will need to use a ladder or lift to gain access to all the pipes. With this in mind, you always need to make sure you are labeling your pipes with the highest quality label stock possible. Vinyl labels, for example, will stick well to the pipes and can last for years. If you are labeling a pipe that carries steam or hot liquids, you will want to make sure to choose pipe marking labels that are specifically designed for high temperature. When you use the highest quality labels, you won't have to replace them again for many years, which can help keep your facility safe and running smoothly. Best Practice #2 - Standard Color Labels It is always a good idea to follow the industry established guidelines for the color of the labels you use. ANSI has a color scheme that is largely used across all industries, which effectively makes it a best practice. Even if you are not legally required to follow this set of standa
rasel136

The 5 Best Streaming Sites to Listen to Classical Music - 0 views

  •  
    Introduction It's the end of the day. You get home from work, sit down on your couch, and begin to relax. In this process, you may turn to music as a way to help you relax and forget the stresses of daily life. The best kind of music for this? Classical instrumental music, of course! But there's one small problem: how do you find classical music? After all, classical music isn't as popular as pop, hip hop, and rock, making it semi-difficult to find classical music, especially if your taste involves more obscure pieces. The journey to find such pieces can be difficult, which is why I want to help you by telling you the best sites and streaming services to find-and listen to-classical music. So, without further ado, let's jump right into it! The 5 Best Sites for Classical Music YouTube What kind of list would this be if I neglected to mention one of, if not the most popular website in the world, YouTube. Ever since it's inception in 2005, the site's displayed steady growth, allowing billions of people to find enjoyment and joy on the Internet. And with YouTube being one of the biggest sites in the world, it only makes sense to have a section of the website dedicated to music. This section, aptly named YouTube Music, contains any kind of music for any kind of listener. This includes classic instrumental music. Trust me when I say, there is plenty of classical music for you to listen to, from the most popular composers to the more obscure composers. Spotify Next up, we have Spotify, a titan of the streaming industry. While Spotify doesn't allow the streaming of videos, no service besides Apple Music can compete with its catalog of music, including classical instrumental music. Spotify is especially great for people who like all kinds of genres, and its cheap subscription price gives little reason to not at least consider using the service. As a matter of fact, I think there's a free monthly trial. Wouldn't hurt to give it a spin! Only thing that may give you trou
rasel136

What is a VPN, ExpressVPN Features, Pricing and FAQs - WinErrorFixer - 0 views

  •  
    VPN, i.e., Virtual Private Network, establishes a secure connection to public and private networks over the Internet. VPN helps to protect your identity and provides a secure network for accessing data. Initially, the VPN connects business networks securely over the Internet. It also allows you to access a business network from home. What is a VPN? How does it work? Why should you use it? These are some common questions that come in the mind of every person who wants to use a VPN. So, let's find out the answer to all these questions. Contents [show] How Does a VPN Work? How Does a VPN Work It is not rocket science to understand how a VPN works. We can simply learn the process of VPN by reading the following steps. Step 1: At first, you need a reliable VPN provider (ExpressVPN Recommended). Then download and install the software. Now select the preferred security settings and set up a safe connection with your desired VPN server. Step 2: After the connection is established; VPN software encrypts your data traffic on your computer and sends it to the VPN server through a secure connection. Step 3: The VPN server decrypts the encrypted data from your computer. Step 4: Your data is being sent on the Internet by the VPN server and receive a reply, which is meant for you. Step 5: This traffic is again encrypted by VPN-server and is sent back to you. Step 6: VPN software will decrypt the data on your device so you can understand and use it. Why ExpressVPN is the Best? The best thing I like about ExpressVPN is that it has a no-logging policy. Apart, from this ExpressVPN is fast, secure, and keeps your IP hidden. ExpressVPN allows you Torrenting/P2P and even works with Tor for the maximum level of privacy. It has a user-friendly interface and a great design that is easy to operate. ExpressVPN uses the government-grade encryption method as default. You can even try doing it manually. ExpressVPN is the best excellent premium VPN service to trust and work.
pintadachica

Indoor Air Quality - 5 Things you should know - 0 views

  •  
    Improving Indoor Air Quality Indoor Air QualityWhen trying to make improvements to the workplace, many companies don't even consider the actual air that is breathed in by everyone all day. Indoor air quality can be a significant problem that can have a wide range of different effects on employees throughout the facility. Some of these issues can be immediately seen, such as with allergies. Others may take longer to develop, but can be very serious. If you are not taking air quality seriously in your facility, you are not only doing everyone a disservice, but you could be exposing the company to the risk of potential lawsuits years down the road. With this in mind, take some time to look at five of the most important things that you should know about indoor air quality, and how you can make simple changes to improve it. According to OSHA's Safety and Health Topics: Poor indoor air quality (IAQ) has been tied to symptoms like headaches, fatigue, trouble concentrating, and irritation of the eyes, nose, throat and lungs. Also, some specific diseases have been linked to specific air contaminants or indoor environments, like asthma with damp indoor environments. In addition, some exposures, such as asbestos and radon, do not cause immediate symptoms but can lead to cancer after many years. 5 Things to Know about Indoor Air Quality 1. Proper Ventilation and Filtering One of the biggest problems in most workplaces is that the air in the facility doesn't get properly circulated. As the air is breathed, moved around machinery and exposed to cleaning chemicals, it keeps picking up more and more contaminants along the way. Over time, this air can become hazardous to your health and lead to things like headaches, allergies and many other issues. This is why OSHA and many other regulatory organizations recommend reviewing your facilities air ventilation system and filtering. By taking the air from within the facility and venting it outside, all of these common contam
pintadachica

10 Construction Safety Facts the May Surprise You - 0 views

  •  
    Make Construction Safety a Priority Everyone knows that construction sites can be very dangerous. The more you know about the types of danger you will face, however, will help you to take steps toward keeping everyone safe. Look over the following 10 safety facts and see what you can learn about how to improve the overall safety of your facility. In addition to using this information to help you to make safety improvements, you can also show these items to the workers at any site so they can be more aware. Some of these facts may surprise people, and cause them to be more aware of their surroundings. According to OSHA, "Nearly 6.5 million people work at approximately 252,000 construction sites across the nation on any given day. The fatal injury rate for the construction industry is higher than the national average in this category for all industries." 10 Tips to Improve Construction Safety Fact #1 - Losing your Load On construction sites people use machines to lift and move all sorts of things on a regular basis. Whether it is lifting wood or metal beams, or you are digging out dirt to prepare to lay a foundation, this is an essential part of most jobs. The vast majority of times this type of activity goes very smoothly and the jobs are completed without incident. The fact is, however, that having loads come loose while in transit is actually a leading cause of injury on construction sites. You need to keep in mind that even if you don't lose the entire load, people can be severely injured from even one thing falling out of a crane or back hoe. With this in mind, people working on site need to know to stay well away from this machinery, and the machine operators need to know to avoid moving items when people are nearby. Fact #2 - Entering and Leaving Heavy Machinery Another safety issue related to working with heavy machinery is related to operators getting on and off of the rigs that they will be working on. While this is something that they of
pintadachica

Safety Lean Manufacturing - 5 Ways to Combine Safety and Lean - Lean Challenge - 0 views

  •  
    Improving and Implementing Safety Lean Manufacturing Safety Lean ManufacturingWhen people look at facility improvement opportunities they often look at process improvement methodologies, such as Lean Manufacturing. Another thing that is commonly reviewed is facility safety improvements. In many cases, however, they don't see that using lean manufacturing techniques can often also provide safety improvements. Thinking about safety lean manufacturing will allow you to make improvements throughout your facility in a way that will not only reduce waste and increase profitability, but also help improve safety at the same time. The following are five examples of how lean can directly improve safety within your facility. According to DesignSafe's document on, Integrating Safety and Lean Manufacturing Safety must not be viewed as a separate activity that is a non value-added effort with objectives contrary to lean concepts. Elimination of waste can also be interpreted as the elimination or minimization of risk that adversely affects wasted human resources and lost time from injuries. Lean imperatives of faster, better, and cheaper must encompass the issue of running safer as well. Safety Lean Manufacturing - Top 5 ways to Combine Them 1. Eliminate Overproduction to Reduce Unnecessary Interaction with Machines Safety Lean Manufacturing OverproductionOne important focus for lean manufacturing is the elimination of over production. While this is mainly done to help eliminate waste, it will also make for a safer facility because people won't be working on the machines as much. Any interaction with the machine is an opportunity for an accident, so this is a good move for safety too. Look also at the fact that when people are spending more hours working at a machine, they are likely to be more fatigued, which increases the risk for accidents and injuries. 2. Listening to Employees Improvement Ideas One of the trademarks of a good lean manufacturing program is t
Sam Blogger

5 Foolproof Ways to Boost Your Affiliate Product Sales In 2020 - 0 views

  •  
    5 Foolproof Ways to Boost Your Affiliate Product Sales In 2020
pintadachica

5 signs why your digital transformation might be in trouble - The AI Company - 0 views

  •  
    Digital Transformation is tough, even for seasoned technologists. This is because it is a transformation of an organization at its core. Everything from culture, technology, ideation, development, integration, delivery, and support needs to fundamentally shift to be more customer-centric, service driven, automation first and experimental in nature. No wonder that a lot of organizations take a long time and a lot of investment to see ROI from their digital transformations. Here are 5 signs that your digital transformation might be in trouble. Culture mistrusts the core digital transformation team You are spawning new initiatives before completing previous ones Decisions are top down with low accountability at the leaf nodes You tend to focus on technology stacks with little focus on customer value Inter-organization politics stifles cross-organization scenarios Culture mistrusts the core digital transformation team It is almost impossible to make an entire organization aware and participate in digital transformation at the same time. There are exceptions but in our experience, starting out with a core digital transformation team is a much better strategy than otherwise. This team should be enabled to attack a limited set of important and business relevant problems, build cutting-edge solutions and use them as examples to train and evangelize digital transformation strategies to the rest of the organization. However, the more entrenched an organization in the old way of doing things, the harder they might this central team. Resistance can be active and passive such as refusal to share data or provide the relevant context of the problem. An organization that does not set up the early crusaders for success almost always has a much harder time showing value from their digital transformation activities. You are spawning new initiatives before completing previous ones Executing on a digital transformation strategy is much harder than defining the strategy especially fo
pintadachica

Kaizen Continuous Improvement - Ten Tips - Creative Safety - 0 views

  •  
    Ten Tips to Help You with Your Kaizen Continuous Improvement Strategy The Kaizen methodology encourages ongoing efforts to ensure continuous improvement throughout a facility. This improvement can come in many forms including waste elimination, improved efficiency, safer work environments and much more. To simply say that a facility is employing Kaizen strategies, is essentially meaningless if you don't have any concrete action items you are following. Whether you're just getting started or you are looking for ways to reinvigorate a Kaizen strategy that is not effective, the following ten tips will be very helpful. Each one can give you ideas on what you can do encourage improvement and allow that improvement to grow and expand long into the future. Tip #1 - Harness the PDCA Strategy One of the key concepts used in Kaizen is the "Plan-Do-Check-Act" strategy. This is a quality model that can be used when implementing any type of improvement in the facility. As you might expect, the PDCA strategy is a cycle of ongoing improvement that should never end. The steps are as follows: Plan - This step is where you identify an area where improvement is possible and make an initial strategy on what chance should be made to realize the desired improvements. Do - Implement the change, but only on a small scale. This may mean having one department make the change in some situations or for larger corporations, having one facility make the update. During this step it is also very important to be gathering as much data regarding the change so it can be properly evaluated. Check - Review the results of the change including the data that was collected. Looking to see if they had the desired impact or not is critical to know whether you should move forward with rolling the change out to other areas. Act - IF the data in the check step points to a success, it is time to push the change out on a wider scale. Once the change has been successfully implemented you wi
pintadachica

So here's how today started out... - Creative Safety - 0 views

  •  
    So here's how today started out… We got an email from a guy who took issue with one of our recent infographics, 10 Astonishing Facts About Arc Flash. Here's what he wrote: "Have you seen the commercial for the insurance company that uses the premise "If it's on the the Internet, it must be true"? I have still not seen the source of these statistics. The Capschell report is what all of these websites, all of which involved in the business of Arc Flash for profit ($$$$), including yours, use without merit. […] Even NFPA 70E does not not cite the source of the statistic regarding "2000 injuries per day". Don't just give me another website that says that again, show me source (ie the study) that produces those statistics. I am not, by any means, attempting to reduce the importance of arc flash, arc flash studies or PPE. I just have a problem when companies use these types of statistics without regard to the source or veracity of the information. Fear Mongering is the term that come to mind. It's on the internet so it must be true." I believe whole-heartedly that our marketing team did a significant amount of research on Arc Flash prior to creating this infographic, and I don't believe the intent of our marketing team to promote or perpetuate bad information. However, I can understand this person's sentiment, and I wanted to know myself what the real numbers were. So, the hunt for accurate data began. Before I go further, it should be addressed that our infographic says that there are 2,000 injuries each year, not every day. Still, where did this figure come from? I started searching to uncover where the 2,000 injuries per year came from. I asked the marketing team for their source, and they provided me with the official NFPA 70E 2012 Handbook. In Annex K(3), it states plainly that 2,000 people a year are injured as a result of arc flash. But, as our accuser points out, there is no citation. Because this is NFPA, a standardization or
pintadachica

6 Ways Lean IT Can Help Enterprises - Creative Safety - 0 views

  •  
    Lean has been helping companies streamline their production, eliminate waste, and generally improve the way things are done for many years. Initially, the concepts behind lean were primarily used only in companies and facilities that were directly involved with physical product creation, such as manufacturing plants, factory floors and things of this nature. However, over time the lean methodologies have been adapted and implemented in almost every other type of business, ranging from health care to information technology, and many more. When done properly, lean can help improve virtually any work environment to help eliminate waste, improve communication, and to help ensure that the products or services being developed are indeed something customers will be interested in. For instance, when working in an information technology environment, it is important to be able to understand how lean strategies can be implemented, and why they are so important. The following are some of the most significant reasons why lean IT strategies should be taken seriously by any company that uses technology in their business (which is almost all of them!). Lean Promotes Ownership One of the things about lean strategies in an IT environment is that virtually every task completed is owned by an individual. Even if a person does not do all the work for a particular project, he or she will be directly responsible for overseeing it. This creates a sense of ownership, which can help in a variety of ways. It will give other teams a single point of contact for obtaining updates, providing feedback, or requesting changes. This will also allow the owner of a specific project to drive the progress directly, rather than having to rely on large committees or other types of groups to receive pertinent information. It is important to note that just because one person owns a process or project does not mean that he or she can simply dictate things to other groups. Instead, that person is there to
pintadachica

Awkward Postures - Five Postures to be avoided in the Workplace - 0 views

  •  
    Eliminating Awkward Postures For most companies, the work that employees perform on a daily basis can be quite physical. This type of physical labor can lead to a wide range of injuries. Of course, to improve on workplace safety it is important to do all you can to help reduce the amount and severity of these types of injuries. One easy place where you can start is with the different postures that employees take while performing their day to day activities. In many cases, they put themselves in awkward postures, which increase the risk of injuries to the back, neck and other parts of the body. Fortunately, there are typically alternative ways to do things or even tools that can do those tasks for them so they can avoid injury. According to OSHA: Working in awkward postures increases the exertion and muscle force an employee must apply to complete a task and compresses tendons, nerves and blood vessels. In general, the more extreme the postures the more force is needed to complete the task. Examples of awkward postures include performing overhead work, bending or twisting to lift an object, typing with bent wrists, and squatting. The important thing is helping to identify the awkward postures, and help find alternatives for the employees. The following five positions should be removed from the workplace as much as possible so that employees can complete their work with as little risk for injury as possible. 5 Awkward Postures that Should be Avoided 1. Working with Arms above the Head The first awkward posture that is commonly seen in workplaces is trying to complete tasks with your arms above the head. There are many examples of this, some of which could include holding up a board while it is secured in place, or even painting a ceiling. Any time you are working with your arms over your head, you are putting added strain on your back. In addition, your arms are going to fatigue much more quickly than they would in a more natural position. This can put you at r
pintadachica

The GHS and You - 5 Big Changes - Safety Blog and News - Informing the Working Communit... - 0 views

  •  
    The GHS and You - 5 Big Changes April 10, 2014 by Tony Ferraro If your workplace handles chemicals, particularly as the initial producer or as a distributor to clients, it's time to familiarize yourself with the global harmonization system (GHS) of classification and labeling chemicals, or the GHS, for short. What is the GHS? The GHS, first proposed to the United Nations in 1992, is an attempt at bringing some uniformity to the chemical labeling procedures of the developed world. Member nations, based upon their own time-frames, signed on to promise to convert to the GHS method of labeling chemical substances by a certain date. The idea was and still remains to make international business and production easier by having chemical labeling procedures that wouldn't slow down import and export, and would be easy for everyone involved to understand. This also greatly reduces transport costs as materials aren't having to be re-labeled or re-inspected as they cross borders. Last, but certainly not least, the GHS protects workers by ensuring the risks of handling any given material are clearly stated in an easy to understand manner from the beginning. According the UN's publishing of a GHS guide, the following are succinct statements of the GHS' most important goals: Defining health, physical and environmental hazards of chemicals: Creating classification processes that use available data on chemicals for comparison with the defined hazard criteria; and Communicating hazard information, as well as protective measures, on labels and Safety Data Sheets (SDS). OSHA.gov - GHS What does this mean for me? In the United States, the time-frame for adoption is staggered over several stages. On March 2012, the final rule for how workplaces should adopt their policies was published, and employees were required to be trained on these new procedures by December 1, 2013. Interestingly enough, the adoption of the standard by product manufacturers is not required until Ju
pintadachica

The Label Printer Buying Guide for Industrial and Commercial Purposes - Creative Safety - 0 views

  •  
    If you are planning on purchasing an industrial-grade thermal label printer, you need to weigh several factors. Let's face it, these kind of machines are not cheap-they aren't like the flimsy ones that folks buy to make organizational labels for their home, or for scrapbooking-these are commercial level equipment, and they're designed to hold up to all the rigors of an industrial operation. Pipe Marking Labels So, with that in mind, here are the top 6 factors you should consider before you buy an industrial label maker: 1. Purpose: First off, what do you need to make heavy-duty labels for? Sure, these types of printers can make funny bumper stickers with a catchy slogan on it-but what do you REALLY need it for? Common uses for these are for making lots and lots of pipe markers, arc flash labels, and NFPA 704 "diamond" signs. They're also great for making safety slogans, caution and warning signs, 5S, lean, kaizen, and traffic marking stickers. Depending on how many you need, you might need to use it every day, or for sporadic printings throughout the year. These printers are great, because most of them can print on label tape up to 4 inches wide, and can spit labels out much quicker than those store-bought consumer ones. They can also take the heat and tougher environments of factories and warehouses. 2. Durability: Modern label makers are nearly flawless at their job. They use thermal transfer ribbons and heat seal the text or graphics from the ribbon to a compatible thermal label. This allows for a product that will last for many years before seeing much physical degradation or fading. They are water-resistant and even resist chemical wear. 3. Ease of Use: Many label makers come with their own proprietary software, but I would recommend buying a label maker that can be used with any kind of word processing software or even programs like Photoshop. This way, if you have a change in employees, move offices, or just plain lose the or
perryqueen33

Is stock trading profitable or not? - 0 views

Absolutely yes if you invest in stocks it is profitable sometimes and sometimes not. As we all know that business is the name of taking risks so you have to take a risk in investing your money into...

blog Blogging creative Marketing seo company digital Wordpress AI

started by perryqueen33 on 07 Aug 19 no follow-up yet
davidjames9001

The 5 best accounting software for small businesses - 2020 - 0 views

  •  
    The 5 best accounting software for small businesses - 2020
davidjames9001

5 Simple Steps To Become An Influencer Online - 0 views

  •  
    5 Simple Steps To Become An Influencer Online
davidjames9001

Top 5 Apps For Better Writing - 0 views

  •  
    Top 5 Apps For Better Writing
smithlexi290

Top 5 Marketing KPIs to Track Potential Customers - Marketing - 0 views

  •  
    Track your potential customers with the help of these top 5 marketing KPIs. Read this article to know how you will be able to attract more loyal customers.
davidjames9001

5 Reasons to Improve your Cyber Security - 0 views

  •  
    5 Reasons to Improve your Cyber Security
1 - 20 of 85 Next › Last »
Showing 20 items per page