Group items tagged

If you pry open one of today's ubiquitous high-tech devices-whether a cellphone, a laptop, or an electric car-you'll find that batteries take up most of the space inside. Indeed, the recent evolution of batteries has made it possible to pack ample power in small places.

solidstate batteries would be perfect indeed, but up to now I know of no solid electrolyte that can do the trick. The article itself does not mention any material beyond superionic lithium-ion conductors, but does not specify which one in particular. The premis seems to be "if it conducts fast enough, the battery can conduct efficiently"

We consider the possibility that solid molecular hydrogen is present in interstellar space....

First demostration of coherent and reversible mapping of a light field with less than one photon per pulse onto an ensemble of approx10^7 atoms naturally trapped in a solid.

Imagine if your clothing could, on demand, release just enough heat to keep you warm and cozy, allowing you to dial back on your thermostat settings and stay comfortable in a cooler room. Or, picture a car windshield that stores the sun's energy and then releases it as a burst of heat to melt away a layer of ice.

interesting indeed: Such chemically-based storage materials, known as solar thermal fuels (STF), have been developed before, including in previous work by Grossman and his team. But those earlier efforts "had limited utility in solid-state applications" because they were designed to be used in liquid solutions and not capable of making durable solid-state films, Zhitomirsky says. The new approach is the first based on a solid-state material, in this case a polymer, and the first based on inexpensive materials and widespread manufacturing technology. Read more at: http://phys.org/news/2016-01-material-harvest-sunlight-day-demand.html#jCp

We discussed this today during coffee. The inventor claims that he claims that a pressure differential can push hydrogen through a proton conductive membrane (thereby stripping off the electrons) which flow through an electric circuit and provide electric power. The type of membrane is fairly similar to that found in a hydrogen fuel cell. If the pressure differential is cause by selective heating this is in essence a heat engine that directly produces electricity. The inventor claims that this could be a high efficiency alternative to thermoelectric devices and could even outperform PV and Sterling engines with an efficiency close to that of fuel cells (e.g., ~60% @ dT=600K). I could not find any scientific publications as the inventor is not affiliated to any University - he has however an impressive number of patents from a very wide field (e.g., the "Super Soaker" squirt gun) and has worked on several NASA and US military projects. His current research seams to be funded by the latter as well. Here are some more links that I found: http://www.theatlantic.com/magazine/archive/2010/11/shooting-for-the-sun/308268/ http://www.johnsonems.com/?q=node/13 http://scholar.google.nl/scholar?q=%22lonnie+g+johnson%22+&btnG=&hl=nl&as_sdt=0%2C5

...and hitting the news in the same day: A Rocket Built from U.S. and European Parts "A new rocket that would combine parts from NASA's canceled Ares I rocket as well as the Ariane 5 , a well-proven European satellite launcher, could provide a low-cost option for taking crew and cargo to the space station. The rocket proposal was announced this week by ATK, an aerospace and defense company that manufactures the solid rocket motors for NASA's space shuttles, and Astrium, the European company that makes the Ariane 5. They say the rocket, called Liberty, would be ready for flight by 2015." "Other commercial companies, including Boeing and Orbital Sciences Corporation, are looking to use low-end versions of the Atlas V to carry the capsules they are building. Liberty could carry any capsule at a cost less than that of the Atlas V, according to ATK." Look! Competition! :)

could this also be useful - I doubt so since it seems to use air flow for cooling but don#t really understand the mechanisms ...

In nature, the molecular-recognition ability of peptides and, consequently, their functions are evolved through successive cycles of mutation and selection. Using biology as a guide, we can now select, tailor, and control peptide-solid interactions and ex

interesting that Google is getting involved into this. The article describes well the situation though, lots of ideas, existing technology but no framework and solid products yet

he JTEC is an all solid-state engine that operates on the Ericsson cycle. Equivalent to Carnot, the Ericsson cycle offers the maximum theoretical efficiency available from an engine operating between two temperatures.

appears like solid data confirming the link between the two; using also EO data from space

Solid state tunnel junction can cool "payload" to sub-Kelvin temperatures. This would be much more convenient than for example helium3-helium4 mixing. Proposed use for cooling sensors on spacecraft - could extend lifetime of satellites like ESA's about to switched off Herschel almost indefinitely.

So... who is in?

nice comment Johannes ... if you add a bit of Kleopatre, e.g. why bathing in milk helped her fool Marcus Antonius, your comment would be fully interdisciplinary :-)

you mean it would include History or Psychology? I would understand why Marcus Antonius might get fooled by a bathing beauty - but milk? DONKEY MILK?!? That's just wrong... :-[

"Her goal was to design and synthesise a super capacitor with increased energy density while maintaining power density and long cycle life. She designed, synthesised and characterised a novel core-shell nanorod electrode with hydrogemated TiO2(H-TiO2) core and polyaniline shell. H-TiO2 acts as the double layer electrostatic core. Good conductivity of H-TiO2 combined with the high pseudo capacitance of polyaniline results in significantly higher overall capacitance and energy density while retaining good power density and cycle life. This new electrode was fabricated into a flexible solid-state device to light an LED to test it in a practical application. Khare then evaluated the structural and electrochemical properties of the new electrode. It demonstrated high capacitance of 203.3 mF/cm2 (238.5 F/g) compared to the next best alternative super capacitor in previous research of 80 F/g, due to the design of the core-shell structure. This resulted in excellent energy density of 20.1 Wh/kg, comparable to batteries, while maintaining a high power density of 20540 W/kg. It also demonstrated a much higher cycle life compared to batteries, with a low 32.5% capacitance loss over 10,000 cycles at a high scan rate of 200 mV/s."

Linked to the discussion we had last week on elastically non-linear polymers. The inverted liquid->solid phase transition might be interesting and the material might be self-healing just above the transition.

Bacterial wires explain enigmatic electric currents in the seabed: Each one of these 'cable bacteria' contains a bundle of insulated wires that conduct an electric current from one end to the other. Cable bacteria explain electric currents in the seabed Electricity and seawater are usually a bad mix.

WOW!!!! don't want to even imagine what we do to these with the trailing fishing boats that sweep through sea beds with large masses .... "Our experiments showed that the electric connections in the seabed must be solid structures built by bacteria," says PhD student Christian Pfeffer, Aarhus University. He could interrupt the electric currents by pulling a thin wire horizontally through the seafloor. Just as when an excavator cuts our electric cables. In microscopes, scientists found a hitherto unknown type of long, multi-cellular bacteria that was always present when scientists measured the electric currents. "The incredible idea that these bacteria should be electric cables really fell into place when, inside the bacteria, we saw wire-like strings enclosed by a membrane," says Nils Risgaard-Petersen, Aarhus University. Kilometers of living cables The bacterium is one hundred times thinner than a hair and the whole bacterium functions as an electric cable with a number of insulated wires within it. Quite similar to the electric cables we know from our daily lives. "Such unique insulated biological wires seem simple but with incredible complexity at nanoscale," says PhD student Jie Song, Aarhus University, who used nanotools to map the electrical properties of the cable bacteria. In an undisturbed seabed more than tens of thousands kilometers cable bacteria live under a single square meter seabed. The ability to conduct an electric current gives cable bacteria such large benefits that it conquers much of the energy from decomposition processes in the seabed. Unlike all other known forms of life, cable bacteria maintain an efficient combustion down in the oxygen-free part of the seabed. It only requires that one end of the individual reaches the oxygen which the seawater provides to the top millimeters of the seabed. The combustion is a transfer of the electrons of the food to oxygen which the bacterial inner wires manage over centimeter-long distances. However, s

CubeSats + 3D printing... for space. I'm surprised this isn't an ACT project :) more info: SpiderFab: Process for On-Orbit Construction of Kilometer-Scale Apertures

$100,000 from NASA's Innovative Advanced Concepts program to hammer out a design and figure out whether spacecraft self-construction makes business sense .... I can answer for 0$ ..... NO Infact the question is just stupid: a) spacecraft self-construction exist: then it is a no brainer to decide wether it makes business sense b) it does not: then there is no business

The first solid experimental evidence for the existence of the Higgs boson has been unveiled today by physicists working on the Large Hadron Collider (LHC) at CERN in Geneva. Members of the ATLAS experiment revealed evidence that the Higgs particle has a mass of about 126 GeV/c2. "By 2014/2015 we could have enough additional data to eliminate large classes of theories that attempt to explain the Higgs,"

Researchers report a new way to use X-rays to probe the properties of solid materials.

This is becoming a mess :)

I see your point, and I agree that funding was also promoted through the energy players and their political influence. A coincident parallel interest which is irrelevant to the fact that the question remains vital. How do we affect climate and how does it respond. Huge complex system to analyse which responds in various time scales which could obscure the trend. What if we made a conceptual parallelism with the L Ácquila case : Is the scientific method guilty or the interpretation of uncertainty in terms of societal mobilization? Should we leave the humanitarian aspect outside any scientific activity?

I do not think there is anyone arguing that the question is not interesting and complex. The debate, instead, addresses the predictive value of the models produced so far. Are they good enough to be used outside of the scientific process aimed at improving them? Or should one wait for "the scientific method" to bring forth substantial improvements to the current understanding and only then start using its results? One can take both stand points, but some recent developments will bring many towards the second approach.