Group items tagged

Lactic acid can be made into polylactic acid. Polymer lactic acid is the downstream product of lactic acid. We have polylactic acid biopolymer, polymer-grade lactic acid=high-gloss pure lactic acid.

Global Industrial Labels Market Information by Material (Metal, Polymer and others), by Mechanism (Pressure-sensitive, Glue-applied, Heat Transfer and others), by Application (Transportation, Construction, Automotive, Consumer Durables and others) and by Region - Forecast to 2022

Global Flexible Lid Stock Packaging Market Information Report by Type (Paper, Aluminum Foil, Polymer Films, Others), By Application (Food & Beverages, Chemicals, Personal Care, Health Care, Others) and By Region - Global Forecast To 2022

1. Common errors in the operation: Operators used to come to the factory in the morning to warm up the double screw extrusion extruder, and then go to do other things. This allows the twin screw plastic extruder to sit idle for several hours after being heated up to the designed temperature. This operation will cause the polymer to adhere to the screw and barrel, and the polymer material will continue to degrade and carbonize. Then, it is difficult to completely remove these materials when cleaning the machine. What is worse, once the two screw extruder starts to produce products, black spots will periodically exist in the materials extruded from the screw and barrel, polluting the products and leading to substandard product quality.

Sodium lignosulfonate in concrete is a kind of inorganic, chemical formula for C20H24Na2O10S2, lignin is only second to the content of cellulose and chitin natural polymer in nature, one of its most widely used is through sulfonation modification into lignosulfonate. Lignininsulfonate of sodium is one of them. Sodium lignosulfonate for sale can be used as an admixture for polymers and concrete, and has the advantages of low cost and environmental friendliness. It's a custom cas no 8061 51 6 product, feel free to contact us!

Peek applications Understanding PEEK Polyetheretherketone (PEEK) is a high-performance engineering polymer that has one of the highest strength-to-weight ratios of all thermoplastics and superior heat resistance. Polyetheretherketone can be used as a substitute for other materials, including glass, steel, aluminum, and other polymers. Its strength is complemented by its high purity and lubricity, making it suitable for challenging applications.

Jilin Joinature Polymer Co., Ltd. was founded in 2006 and listed in the New OTC Market (stock code 835017) in 2015. Located in the Luyuan Economic Development Zone of Changchun, covers an area of 27103 m². The registered capital is 91.26 million RMB. Our current annual capacity is 1500 tons of PEEK. It is a modern high-tech enterprise integrated into PEEK R&D, manufacture and marketing.

Electronics Injection Molding, Electric Plastic Molding, Molding Electronics | Proto-Mold

PC is almost colorless glassy amorphous polymer with good optical properties. PC high molecular weight resin has high toughness, cantilever notch impact strength of 600~900J/m, unfilled grade thermal deformation temperature of about 130°C, glass fiber reinforced can increase this value by 10°C. PC bending modulus can reach more than 2400MPa, resin can be processed into large rigid products. Below 100°C, the creep rate under load is very low. PC has poor hydrolysis resistance and cannot be used to repeatedly withstand high pressure steam products.

The mixing of plastics is to use an effective means or polymer compounding equipment to process multi-component raw materials into more uniform and practical particles. This process needs to go through, raw material pretreatment, feeding, plasticization, mixing, dispersion and distribution, exhaust, molding, etc. Some raw materials may occur chemical or physical reactions in the process. For twin screw machine, it has friendly operability, applicability and versatility.

Jilin Joinature Polymer Co., Ltd. was founded in 2006 and listed in the New OTC Market (stock code 835017) in 2015. Located in the Luyuan Economic Development Zone of Changchun, covers an area of 27103 m². The registered capital is 91.26 million RMB. Our current annual capacity is 1500 tons of PEEK. It is a modern high-tech enterprise integrated into PEEK R&D, manufacture and marketing.

As a leading peek material manufacturer in China, Zypeek provides quality carbon fiber reinforced peek. It is with carbon fiber, high elastic modulus, mechanical strength, creep resistance, wear resistance and dynamic fatigue resistance. Buy polyetheretherketone peek material at competitive price now!

The extruder double screw is a molding processing equipment that is suitable for polymer processing with high productivity, wide application range and strong change ability. Because of its superior cost performance, it is widely welcomed by plastic product processing and manufacturing enterprises, who are searching for and selling good double screw extruder in a wide range.

Amorphous Solid Dispersions pharmaceutical amorphous solid dispersions have been shown to alter the properties of an API, including solubility, dissolution, and bioavailability. A variety of polymers or additives are available, and screening is needed to find possible miscible dispersions that will have the properties needed for development. Our service including: The amorphous spray dried dispersion will then be used in simple formulations for early development (such as suspensions, drug in capsules, or preliminary formulations) or formulated into a drug product (such as tablets or capsules) for late-stage development and marketed products.