Group items tagged

Jiaxing Nanyang Wanshixing Chemical Co., Ltd. was founded in 2004, as one subsidiary of Zhejiang Nanyang Group. It is the second chemical factory after Jiaxing Nanyang Plastic Chemical Co. Ltd.. We are professional epoxy hardener manufacturer. Our company is located in National Chemical Industrial Park , Zhapu Harbor Area , Jiaxing, Zhejiang Province which is about 100 kilometers away from Shanghai, Ningbo and Hangzhou, holding the great advantage of convenient transportation.

The induction hardening process is a very important way in the manufacturing process of heat treatment of mechanical parts. In order to improve the hardness of metal's surface, not only should the surface layer depth of the workpiece reach the industrial design standard, but the heat treatment production plants are also needed to introduce the hardening process in the production.

Digital manufacturing for plastic prototypes and on-de-mand production parts. Request an injection molding quote today. Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Material for the part is fed into a heated barrel, mixed and injected into a mold cavity where it cools and hardens to the configuration of the cavity.

Digital manufacturing for plastic prototypes and on-de-mand production parts. Request an injection molding quote today. Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Material for the part is fed into a heated barrel, mixed and injected into a mold cavity where it cools and hardens to the configuration of the cavity.

High Precision Plastic Injection Molding Manufacturer - From Prototype to Production | Fangling

A UV Oiled finish is similar in many ways to a matt varnish as the oil is hardened under UV lights during the finishing process. UV oiled finish wood flooring get more and more popular, to reach an oiled product effect and easier maintenance, UV oiled regard as the best choice at this stage, maintenance is very import. Golink floor use WOCA oil for the UV oil.

MFS-300A high frequency induction heating equipment is an IGBT type high frequency induction hardening, high frequency induction heating furnace. The maximum output power of this machine is 300KW, and its working frequency is at the range of 1-10KHZ. Normally, the actual working frequency is determined by the heating coil and capacitor, which matches with the billets dimensions. While the IGBT heat sink of MFS-300A is made of pure copper, the internal connection structures are made of pure copper panels, high-strength rubber pipes, and stainless steel pipes for water pipelines. And these designs have successfully ensured the reliable quality and long service life of this machine.

Y.sawaragi et al. found that due to the precipitation hardening effect of fine TiC and NbC, adding a small amount of titanium and niobium increased the durability of stainless steel. Through the analysis of niobium-containing steel solution treatment and stainless steel pipes produced by different manufacturers, the results show that the carbonitride content in carbonitrides produced by stainless steel tubes containing 0.2%-0.4% niobium is almost the same. Therefore, they believe that when the solution treatment temperature is 1150, the best niobium content to improve durability is 0.2%.

Titanium, as a challenging material, has a unique combination of properties in terms of high strength, high temperature, chemical reactivity, and elasticity. Due to its strength and tendency to harden during processing, it is difficult to cut using traditional machining techniques. Therefore, Swiss machining is the best choice in general.

In the process of spraying materials, spray foam gun is essential. The spray foam gun needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no material can be retained in the foam gun for a long time. Excess material needs to be removed from the spray foam gun during the purging process.

Why we need to consider the induction heating machine output frequency when we adopt induction frequency heating method to heat the workpiece? What is the relation between the workpiece size, application with the frequency? The induction heating power supply is an industrial application that heats the workpiece by high frequency induction hardening. The higher the frequency of the current passed in the output coil, the less the penetration depth of the induced current generated on the surface of the heated body. The skin effect is more obvious.

1. The high strength of threaded nipple fitting: According to the principle of cold work hardening of steel, the strength of the straight thread rolled on the steel bar is greatly improved, so that the tensile strength of the straight thread joint is higher than the tensile strength of the steel base material.