Pc Hardware Tutorials ? Installing a Laptop Hard Drive - 0 views

• 
  #1 Niemann Lynggaard on 11 May 13

   

  One of the handful of components which is effortlessly upgradable in nearly all transportable computer systems is the hard drive. Laptop computer systems these hp laptop days all use hp the SATA interface which is precisely the very same as that used in desktop computer systems. The only difference among laptop and desktop hard drives is that the former are smaller sized with a 2.5" kind issue whilst the latter have a 3.five" form issue. In truth, it's possible to install a laptop hard drive into a desktop laptop. Installing a laptop difficult drive into your notebook personal computer is a straightforward procedure and each bit as easy as installing 1 in a desktop.
  
  Specifications: Free of charge SATA challenging drive bay
  What you need: Modest Phillips screwdriver
  Time needed: 10 minutes
  Difficulty: Straightforward
  
  
  Step 1 ? Preparations
  
  Guarantee that your laptop is turned off just before continuing. Unplug the power cable and take away like us on facebook the battery pack from its bay in the bottom of the machine. Turn the computer upside-down and locate the difficult drive cover panel. This is normally a rectangular panel in 1 of the corners of the machine, about 3.5 inches wide. It will usually be held in spot by two screws. Some laptops might have a single panel which covers the entire bottom of the personal computer. Eliminate the panel covering the drive bay.
  
  
  Step 2 ? Take away the Existing Drive
  
  Typically, you will locate a modest screw underneath the difficult drive bay cover panel. This screw will connect a tiny metal notch at the side or front of the difficult drive to the metal frame of the pc. After you have removed this, you must be capable to slide the hard drive backwards with small effort. When it comes totally free from the sockets, just lift it out of the drive bay and spot it aside.
  
  
  Step three ? Install the New Drive
  
  Merely slide the new drive into the drive bay, pushing it into the energy and SATA sockets. In contrast to with a desktop laptop, there are no cables to connect. With the hard drive firmly seated in place and correctly connected, place the screw back in the metal tab at the back or side of the drive (if applicable) to repair it in place. Place the drive bay cover back on, making sure that all of the tabs are locked in spot prior to putting the screws back. Your new difficult drive need to be ready to use as soon as you turn the personal computer on once again.

   

  <div class="cArrow"> </div><div class="cContentInner">One of the handful of components which is effortlessly upgradable in nearly all transportable computer systems is the hard drive. Laptop computer systems these <a href="http://www.squidoo.com/consumers522" rel="nofollow">hp laptop</a> days all use <a href="http://youtu.be/HcNbAPwEuWQ" rel="nofollow">hp</a> the SATA interface which is precisely the very same as that used in desktop computer systems. The only difference among laptop and desktop hard drives is that the former are smaller sized with a 2.5" kind issue whilst the latter have a 3.five" form issue. In truth, it's possible to install a laptop hard drive into a desktop laptop. Installing a laptop difficult drive into your notebook personal computer is a straightforward procedure and each bit as easy as installing 1 in a desktop. <br /> <br /> Specifications: Free of charge SATA challenging drive bay <br /> What you need: Modest Phillips screwdriver <br /> Time needed: 10 minutes <br /> Difficulty: Straightforward <br /> <br /> <br /> Step 1 ? Preparations <br /> <br /> Guarantee that your laptop is turned off just before continuing. Unplug the power cable and take away <a href="http://www.youtube.com/watch?v=Zj6EZKVLA5I" rel="nofollow">like us on facebook</a> the battery pack from its bay in the bottom of the machine. Turn the computer upside-down and locate the difficult drive cover panel. This is normally a rectangular panel in 1 of the corners of the machine, about 3.5 inches wide. It will usually be held in spot by two screws. Some laptops might have a single panel which covers the entire bottom of the personal computer. Eliminate the panel covering the drive bay. <br /> <br /> <br /> Step 2 ? Take away the Existing Drive <br /> <br /> Typically, you will locate a modest screw underneath the difficult drive bay cover panel. This screw will connect a tiny metal notch at the side or front of the difficult drive to the metal frame of the pc. After you have removed this, you must be capable to slide the hard drive backwards with small effort. When it comes totally free from the sockets, just lift it out of the drive bay and spot it aside. <br /> <br /> <br /> Step three ? Install the New Drive <br /> <br /> Merely slide the new drive into the drive bay, pushing it into the energy and SATA sockets. In contrast to with a desktop laptop, there are no cables to connect. With the hard drive firmly seated in place and correctly connected, place the screw back in the metal tab at the back or side of the drive (if applicable) to repair it in place. Place the drive bay cover back on, making sure that all of the tabs are locked in spot prior to putting the screws back. Your new difficult drive need to be ready to use as soon as you turn the personal computer on once again.</div>

  ...

  Cancel

To Top