Rigid or Roll up Grille on Trench Heater - 0 views

• 
  #1 trenchstyleuk on 21 Sep 20

   

  Trench Heating Valves

  
  

   

  
  

  Like a traditional radiator system manual valves or thermostatic valves can be fitted to a trench heater system.

  
  

  Thermostatic Radiator valves can be fitted to Trench Heaters, these are generally better with a fixed temperature or selectable dial remote head, this remote head is usually connected to the trench heater thermostatic valve by a thin bore fluid filled metal pipe. It is possible to fit the thermostatic head within the trench heater but potential localised heating from the heater itself could impact on the head sensing.

  
  

   

  
  

  

  
  

   

  
  

  Manual valves are effectively 2 lockshields which are used for isolation and also for balancing of the radiator system, they have no impact on a day to day basis after set, in that they do not respond to temperature in any way - This method is ideal where an in room thermostat controls the cut in / cut out of the central heating system.

  
  

   

  
  

  Trench Heating Grilles

  
  

   

  
  

  Trench Heater Grilles are available in rigid or roll up grille on trench heater, Roll up are easier to lift and clean internally however rigid as the name suggests are more solid under foot.

  
  

  Perimeter Grilles are available in wood, aluminium and steel, these can be further bespoke by Varnish, Laquer and Colour, providing for your exact requirements.

  
  

   

  
  

  Frame Insulation for Trench Heaters

  
  

   

  
  

  If placed within a Duct or dedicated trench external trench heating installation is not neccessarily required as heat loss through the casing will be minimal, however in certain installations where air flow across the housing is open additional insulation is available, this can be in the form of base only insulation of 3 side insulation covering the base and the 2 lengths. The additional 5mm Insulation is fitted prior to delivery or provided in sheets for fit on receipt.

  
  

   

  
  

  Trench Heating Internal Pipe Brackets

  
  

   

  
  

  If you are running a number of Trench Heaters in a row it may be beneficial to run the pipework through the Trench Heaters to the next unit, it is recommended pipe brackets are installed by the manufacturer to facilitate this pass through of heating supply and return pipework.

   

  <div class="cArrow"> </div><div class="cContentInner"><div><span class="underline"><span class="bold">Trench Heating Valves</span></span></div> <br /> <div><span class="bold"> </span></div> <br /> <div>Like a traditional radiator system manual valves or thermostatic valves can be fitted to a trench heater system.</div> <br /> <div>Thermostatic Radiator valves can be fitted to Trench Heaters, these are generally better with a fixed temperature or selectable dial remote head, this remote head is usually connected to the trench heater thermostatic valve by a thin bore fluid filled metal pipe. It is possible to fit the thermostatic head within the trench heater but potential localised heating from the heater itself could impact on the head sensing.</div> <br /> <div> </div> <br /> <div><img src="https://www.diigo.com/file/image/bbooqerczoppabdcdezecrsbbda/14517400_f520.jpg" /></div> <br /> <div> </div> <br /> <div>Manual valves are effectively 2 lockshields which are used for isolation and also for balancing of the radiator system, they have no impact on a day to day basis after set, in that they do not respond to temperature in any way - This method is ideal where an in room thermostat controls the cut in / cut out of the central heating system.</div> <br /> <div> </div> <br /> <div><span class="underline"><span class="bold">Trench Heating Grilles</span></span></div> <br /> <div> </div> <br /> <div>Trench Heater Grilles are available in <strong><a href="https://www.trenchstyle.co.uk/blog/trench-heating-accessories.html" rel="nofollow"><span class="bold">rigid or roll up grille on trench heater</span></a></strong>, Roll up are easier to lift and clean internally however rigid as the name suggests are more solid under foot.</div> <br /> <div>Perimeter Grilles are available in wood, aluminium and steel, these can be further bespoke by Varnish, Laquer and Colour, providing for your exact requirements.</div> <br /> <div> </div> <br /> <div><span class="underline"><span class="bold">Frame Insulation for Trench Heaters</span></span></div> <br /> <div><span class="bold"> </span></div> <br /> <div>If placed within a Duct or dedicated trench external trench heating installation is not neccessarily required as heat loss through the casing will be minimal, however in certain installations where air flow across the housing is open additional insulation is available, this can be in the form of base only insulation of 3 side insulation covering the base and the 2 lengths. The additional 5mm Insulation is fitted prior to delivery or provided in sheets for fit on receipt.</div> <br /> <div> </div> <br /> <div><span class="underline"><span class="bold">Trench Heating Internal Pipe Brackets</span></span></div> <br /> <div> </div> <br /> <div>If you are running a number of Trench Heaters in a row it may be beneficial to run the pipework through the Trench Heaters to the next unit, it is recommended pipe brackets are installed by the manufacturer to facilitate this pass through of heating supply and return pipework.</div></div>

  ...

  Cancel

To Top