How does a glass machine work? - 1 views
started by kbojezhang44 on 30 Mar 20
started by kbojezhang44 on 30 Mar 20
started by kbojezhang44 on 30 Mar 20
started by kbojezhang44 on 30 Mar 20
Glass is very common in daily life. As glass is more and more widely used, the role of glass machine is more and more large. Many people will be curious about how glass machine works and how glass machine works. Take a look at how a Glass machine works with Enkong Glass Machinery.
How a glass machine works
1. The basic principle of
Its working principle is to transfer the cut glass from the conveyor belt to the work table. Firstly, the glass is positioned in a good position mechanically. The cutting head with diamond cutter wheel moves along the X direction and the Y direction respectively by program control to cut the substrate. The control part of the machine adopts CNC motion control card, and the driving part adopts advanced ac servo motor.
2. Equipment component
Automatic glass cutting machine: it is composed of underframe mechanism, beam mechanism, glass processing table top, tool head mechanism, conveying mechanism, mechanical positioning mechanism and electrical control system.
3. Detailed work steps
The whole working process can be completed by PLC automatic control or manual control, manual mode is mainly applicable to equipment adjustment and maintenance, each action can be completed separately, can also be used for normal work. After giving the strip taking signal (manual or automatic), the system works, and the motor drives the mechanical reversal mechanism to make the sucker arm turn up and reach the same tilt Angle as the glass, and the flip stops. The forward moving motor makes the sucker move, and the forward moving motor stops when the detection switch near the top of the sucker contacts the glass. When vacuum system, work began to adsorption glass sucker, when the vacuum pressure switch to set pressure, adjustable according to the thickness of the glass vacuum pump stops, sucker adjustable linkage by motor driven lift up the glass, in this location about stopping for a few seconds later, make sure that single piece of glass suction, motor driven mechanical turnover mechanism transmission glass inversion to mesa, telescopic rod system landed the suction cup and glass at the same time, the rapid release chuck compressed air blowing glass, transmission mechanism on machine start to send glass to the front to stop point signals. Then the whole frame moves and automatically finds the zero position and stops, waiting for the cutting table to send a signal, then the glass slices can be sent to the cutting table at the same speed as the cutting table. After the glass is sent out, the glass slices can be automatically circulated to the cutting table.
4. Equipment performance
1) the underframe material is selected as the national standard bridge steel with manganese profile (Q345A), which is welded into shape and processed by aging. This kind of steel has good comprehensive mechanical properties and good plastic and welding properties. The surface is removed by special derusting process to remove the surface rust and surface oxidation layer. The bottom layer is sprayed with advanced epoxy primer and the surface is sprayed with advanced automobile paint.
2) the equipment is analyzed by professional structural software to ensure the stability, dynamic balance and mechanical strength of the machine to achieve the most perfect match, and to ensure that the table structure is not deformed;
3) the device has a one-button reset function, which can complete all the preparatory work before the automatic start by simply pressing the touch screen, which greatly improves the work efficiency;
4) the overall cable and air pipe are arranged reasonably and completely sealed;
5) cutting oil supply method: it is equipped with double oil circuit (divided into general cutting oil and advanced cutting oil), and air filter device to ensure the use of the cutting oil is clean, and the oil is automatically injected when cutting, and the knife is synchronous (two kinds of cutting oil can also be injected at the same time, mainly true to TCO, low-e and other glass);
6) high-speed silent linear guide rail is used for guide rail, with high cutting precision and low noise;
7) the driving part adopts advanced Japanese yaskawa servo motor to ensure reliable performance, small error and high efficiency;
8) the cutting operation adopts Japanese SMC proportion solenoid valve, which can automatically adjust the pressure according to the thickness of the glass. The cutting head rotates 360 degrees, and the cutting tool can be cut with up and down buffer. (it can accurately cut any straight line and all kinds of special-shaped glass).
9) the tool head is equipped with the protection function of downward cutting. If the tool head falls into the glass outside or the glass gap, the program will stop automatically, effectively preventing the damage of parts and glass;
10) conveying device, synchronous automatic transmission device, convenient transmission of upper and lower glass pieces;
11) positioning device, photoelectric scanning positioning system and mechanical positioning;
12) compensation function, tool eccentricity compensation, clearance compensation, pitch compensation.