Group items tagged

IP camera CCTV Calculator - CCTVCAD Calculator is a professional tool for calculating network bandwidth needed for IP cameras (video encoders) and disk space required for storing video archives. With CCTVCAD Calculator you can: Calculate network traffic generated by digital (IP) cameras and video encoders for the proper design of network CCTV systems. Calculate disk space required for storing video archives during a specified time. The calculation can be carried out for cameras that generate up to 3 simultaneous video streams (Viewing, Recording, Alarm recording) with different resolutions, compression, frame rate, and recording time. The calculation can be carried out for a single camera, all cameras in the project, as well as for isolated groups of cameras, which is useful to estimate the load of separate network segments or equipment. Filtering and sorting are possible in the Table. It is possible to correct intermediate results of calculations (frame size, traffic) if you know more accurate experimental data. Calculations are based on practical results of measuring traffic. The results are combined in the Calculation Patterns, which are editable text files. Special patterns can be created by skilled users or manufacturers (distributors) of CCTV equipment by practical measurements of traffic for certain equipment, scenes, and compression algorithms. Different cameras in one project can be assigned different patterns. The patterns can include a list of supported camera models. If any model from the list is assigned to a camera in the table, then the calculation for the camera performs according to the pattern. Thus the maximum possible calculation accuracy can be achieved. The patterns can contain results of traffic measurements for some averaged scenes with correction factors for its complexity and activity, and the results of traffic measurement for real scenes. CCTVCAD Calculator can work with different sets of input data, depending on their availability and re

IP camera CCTV Calculator - CCTVCAD Calculator is a professional tool for calculating network bandwidth needed for IP cameras (video encoders) and disk space required for storing video archives. With CCTVCAD Calculator you can: Calculate network traffic generated by digital (IP) cameras and video encoders for the proper design of network CCTV systems. Calculate disk space required for storing video archives during a specified time. The calculation can be carried out for cameras that generate up to 3 simultaneous video streams (Viewing, Recording, Alarm recording) with different resolutions, compression, frame rate, and recording time. The calculation can be carried out for a single camera, all cameras in the project, as well as for isolated groups of cameras, which is useful to estimate the load of separate network segments or equipment. Filtering and sorting are possible in the Table. It is possible to correct intermediate results of calculations (frame size, traffic) if you know more accurate experimental data. Calculations are based on practical results of measuring traffic. The results are combined in the Calculation Patterns, which are editable text files. Special patterns can be created by skilled users or manufacturers (distributors) of CCTV equipment by practical measurements of traffic for certain equipment, scenes, and compression algorithms. Different cameras in one project can be assigned different patterns. The patterns can include a list of supported camera models. If any model from the list is assigned to a camera in the table, then the calculation for the camera performs according to the pattern. Thus the maximum possible calculation accuracy can be achieved. The patterns can contain results of traffic measurements for some averaged scenes with correction factors for its complexity and activity, and the results of traffic measurement for real scenes. CCTVCAD Calculator can work with different sets of input data, depending on their availabilit

This software can be used for the selection, calculation, and check of rolling bearings. The program provides solutions to the following tasks: - Selection and check of a suitable bearing. The module includes a database of more than 5000 bearings (INA, FAG). - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair of angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks, Solid Edge). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The program uses data, procedures, algorithms, and other information from specialized literature, catalogs of rolling bearings SKF, ISO, ANSI, SAE standards, and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134.

This software can be used for the selection, calculation, and check of rolling bearings. The program provides solutions to the following tasks: - Selection and check of a suitable bearing. The module includes a database of more than 5000 bearings (RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation, INA USA Corporation). - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair of angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The program uses data, procedures, algorithms, and other information from specialized literature, catalogs of rolling bearings SKF, ISO, ANSI, SAE standards, and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134.

This document can be used for the selection, calculation, and check of rolling bearings of the company SKF. The program provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and designs. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair of angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The program uses data, procedures, algorithms, and other information from specialized literature, catalogs of rolling bearings SKF, ISO, ANSI, SAE standards, and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134.

This software can be used for the selection, calculation, and check of rolling bearings. The program provides solutions to the following tasks: - Selection and check of a suitable bearing. The module includes a database of more than 5000 bearings (INA, FAG). - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair of angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks, Solid Edge). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The program uses data, procedures, algorithms, and other information from specialized literature, catalogs of rolling bearings SKF, ISO, ANSI, SAE standards, and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134.

This software can be used for the selection, calculation, and check of rolling bearings. The program provides solutions to the following tasks: - Selection and check of a suitable bearing. The module includes a database of more than 5000 bearings (RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation, INA USA Corporation). - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair of angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The program uses data, procedures, algorithms, and other information from specialized literature, catalogs of rolling bearings SKF, ISO, ANSI, SAE standards, and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134.

This document can be used for the selection, calculation, and check of rolling bearings of the company SKF. The program provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and designs. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair of angular contact ball bearings resp. - Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full calculation package (Autodesk Inventor, SolidWorks). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The program uses data, procedures, algorithms, and other information from specialized literature, catalogs of rolling bearings SKF, ISO, ANSI, SAE standards, and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134.